Report for All PO by All User

Please advise where in SAP can I go in to run a report of all purchase orders placed by all users exept EKKO Table.
Please note that I need to see a report and say I dont have access to open EKKO Table.
Kindly Reply ASAP.
Thanks
Rajendra

run this report
ME2L           VENDOR WISE
ME2N          PO NUMBER WISE
ME2M          MATERIAL WISE
USE ALV AS LAYOUT TYPE U WILL GET THIS IN EXCEL FORMAT

Similar Messages

Report for transaction - Maintain Object - Roles - user Id ( Authorisation)

Hi
I want to generate a report for the following:
for a transaction
for a check/ maintain object name ( Ist column)
what are the roles ( iind column)
and
what are the user id for each roles.. (iiird column)
and
start up (yes / No) (ivth column)
Please advise.
Since, I need to do this report generation for more than 30 transactions, any immediate reply would be of great help.
Thanks in advance.
Partha

Hi
Try SUIM T-code and see if any of the report works
Thanks

Withholding Tax report for USA 1099 MISC

Hi!
I have configured extended with holding tax as per sap note to generate 1099MISC report for USA.
Actually all with holding tax types have been defined for while payment posting, but system is deducting with holding tax the time of invoice posting itself.
as far as I knew we have to untick liable field in vendor master , while posting invoice and activate again while posting payment, but it is cumbersome process.
My client is expecting with holding tax to be deducted only at the time of payment posting.
I have checked with holding tax types while posting invoice, nothing is there , view V_T059PI is blank.
still system is trying to post with holding tax at the time of invoice only.
Is there any other configuration to restrict with holding tax posting while doing invoice?
regs,
ramesh

Hi Ramesh,
please, review SAP Consulting Note 363650 - Withholding Tax Configuration for 1099MISC - this note might help you to solve the issue.
Best Regards,
Mateus Grings

CM2012 Single report for deployments (packages, apps & TS)

With the introduction of the new Application Model deployments in ConfigMgr 2012 is there anyway to report on deployments regardless is its a package, TS or App deployments in terms of status and laststatus time.
Hi All,
**Re-posting in correct forum :-) **
I've been looking through the current reports and I haven't found a way to report on what we need.
Our requirement is to be able to report on the count and status of the deployments per Client that have executed in a given timeframe (say the previous 30 days\1 month)
What we are trying to achieve is a single report for the results of all deployments (apps, packages, TS) per client within a certain timeframe.
When it was simply advertisements in ConfigMgr 2007 this could be achieved using the Last Status times within the ClientAdvertisementStatus view in combination with the views Advertisement, AdvertisementStatusInformation and CurrentAdvertisementAssignments.
There is some decent reporting on deployments – particularly the DeploymentSummary view, which contains combined information on Apps, Packages and TS but what seems to be missing is the last or latest status time to indicate when
the status occurred (or when the app deployment executed). I’ve been looking through the other views but haven’t yet found a last status time so we can report within a given timeframe.
Anyone else looked at creating this or something similar yet?
Thanks

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
It is unclear to me, do you look at the built-in report and try to modify them? Which built-in report give you the best results?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Reporting Services - Content Manager shows all reports for all domain users even without permissions

I have installed
reporting services 2008 in: Site
Settings option / Security only 3 users
have added:
BUILTIN \ Administrators
System Manager
MYDOMAIN \ user1
System Manager, System User
MYDOMAIN \ user2
System Manager, System User
I have the same settings in the "start
up" folder and inside the folder
where are my reports, however if I authenticate
any user with different domain
to user1 and user2 can see all content
of the report manager can even
manage it.
Help me, greetings
Jenny

however if I
authenticate any user with
different domain to user1 and user2 can see
all content of the report manager can
even manage it.
Hello,
Did you means that other domain user account (Other-Domain\user3) can access reports on the Report Manager without grant any permission? As per my understanding, it is not possible. SQL Server Reporting Services uses Windows Authentication
defaultly to determine who can perform operations and access items on a report server.
Based on your description, you grant the local Administrators group and two domain users with system-level role: System Administrator.  System-level role assignments grant access to global tasks and permissions that apply to a report
server site, That's may cause the user can access and manage all contents on the Report Manager.
If you want to set permissions for accessing conntents on Report Manager, you can just specify itme-level role assignments.For example, if you grant user with Browser role on a report, the user can view report and report properties, but cannot edit
report properties.
Reference:
Lesson 1: Setting System-Level Permissions on a Report Server
Lesson 2: Setting Item-Level Permissions on a Report Server
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

SSRS How to grant BROWSE permission for reports for all the application users?

Hello,
Problem Statement
I need to allow all of my application users to browse the SSRS reports via logging onto the Report Manager and to some other I even want them to use Report Builder to modify & upload the report.
How could I achieve this.
Environment & Current implementation
We use SQL Server 2012 reporting services.
Custom authentication has been implemented using IAuthenticationExtension Interface. For more details, please refer
this msdn link.
Currently, for each new user created in the application, the admin has to manually give BROWSER role to the username to enable that newly created user to browse the reports.
Is there any way in which we can give "everyone" the BROWSE permission and get rid of this manual permission granting process?
Please feel free to ask for any additional information you need to help me on this issue.
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

Hi vinaypugalia,
According to your description, you want to grant permissions for users to access report server in a batch, right?
In your scenario, you can use
script files( AddItemSecurity.rss and ConfigureSystemProperties.rss )with the Reporting Services SOAP API to assign permissions. It’s better that you add those users to a user group then run those script.
Similar thread for your reference:
SQL script to grant user permissions for SQL Server Reporting Services
Programmatically adding users to SSRS?
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Need to run the report for All Values when Null is passed in parameter

Hi All,
In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
IMP : My Database is SQL Server
where
(table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
I also tried simply
table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
Any suggestions on how can I handle this? Any help would be highly appreciated.
Thanks,
Ronny

thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
also please share the SR number, so i can also check the same.
can there be any other work around to this?
thanks,
ronny

Report for all changes in Authorizations

Hello,
I need to create a report that will show me all the changes in authorization for each user.
For example:
Letu2019s assume the following:
01-01 the authorizations for BP were Full authorization
01-02 the authorizations for BP were changed to No authorization
01-03 the authorizations for BP were changed to Read only
On the history log I can show the differences by choosing two lines and clicking on Show difference. But I need a report that will show me ALL the changes in authorizations on various dates range.
Thanks
Revital

On the history log I can show the differences by choosing two lines and clicking on Show difference,
Export to Excel to get a report of changes in authorization,Since authorization is hard coded in table,U can't view it as a report.

Running-report-for-all-values

Hi ,
Based on this link i have implemented this logic....
http://bischool.wordpress.com/2009/08/26/avoid-running-report-for-all-values-on-dashboard-when-using-multi-select-prompt/
But for the intermediate report its taking more time to run...nearly 4min...is there any way to reduce it.
Thanks

hi User,
Quick question
Why you are giving (-1) value's as per the doc we can give any value which has to give no results? Have u tried to give some other value ?
Next,Do u have left outer joins between those tables? If yes you should face the same problem with the main report because the filters to be same as intermediate report am i right ?
First tune-up the rpd and get the main report query ,run-it over DB
Due to huge data and the join taking more time....is there way any thing to add to reduce the time??Huge data ?? Intermediate report will not get any results i think it will not take more time to give a message,but due to join conditions only it is taking long time to run
Note :Before getting value from DB it will check the where condition( joins)
Thanks,
Saichand Varanasi

Email Alerts are working for some but not all users

If some users are getting the alerts and some not, it seems more likely that the issue is with your email server or email clients, not with your SW setup.
Have you checked SPAM / Junk folders on the server and on the clients?

We have alerts setup for multiple scenarios. All of our users are setup the same but not everyone is getting the alert. We are using the spiceworks mail servers and I have checked the Spiceworks App Notifications are set to Yes. Any ideas?
This topic first appeared in the Spiceworks Community

Can we take standard report for all sales orders based on the condition typ

Hi all,
Based on the condition type, we need to take a report for sales orders on the particular date.
Thanks and Regards.....VM

Hello again.
Searching for a solution, I found a Logical Database for sales orders, that have all the information that you need.
Using like reference the post of Bhagavatula, in the same transaction SQVI you can use, instead of the suggested join, you can select a logical database called VAV in Data source.
This logical database links the tables, VBAK, VBAP, VBUK and KONV that is the central point of the question.
You can list the information of logical database using the transaction SLDB.
In 'Logical Database' inform VAV.
Press F8 to list all the fields.
More information about logical database in:
Link: [SAP Logical Database|http://help.sap.com/saphelp_46C/helpdata/EN/9f/db9b5e35c111d1829f0000e829fbfe/content.htm]

Sales document report for all open documents

hi i need the code for sales document report for all open documents is sd
... can anyone help me out.
thanks in advance

Try transaction VA05. In that choose "Open Orders" along with other selection criteria.
If you want the Open sales order qty in output and its not displayed, do the following.
Sales -> System modification -> create new fields ( without condition technique) -> New fields for lists.
You can change V05TZZMO and structure VBMTVZ from there or use SE38 / SE11.
For both you'll need an object registration in OSS.
Hope this helps.
Thanks,
Balaji

Urgent issue REPORT FOR ALL MATERIAL BASED ON STOC TYPE

Hi
I want report for based on stock type
i want to check the stock for all mterial with stock type "quality inspction"
i want that type of material documents
is it possible to see the report
regards sesidhar

I CREATE material A...with out seleting QM view
I create one more material B.... with select QM view
both r ROH material type..
when i caeate GR for material A. with stoc type 'QYALITY INSPECTION.. for this material system does not creat quality LOT....
when i create GR for material B with stock type 'QYALITY INSPECTION.... for this material system created lot..
but are GR done by 101 movement..
but i want report for materials which are stock type QI...but does not display Material which r lot created...?
is it possible..
regards
sesidhar

Report for inquiries for all customers and material

how can i see a report of all inquiries of all customer and materials is there any predefine report in sap
we do have va15 but it does not list depending on the custmer or material, how can we do it for all customer
thanks

Standard SAP SD Reports:=
Statistic Group:
Purpose To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Some of the Standard reports in SD are:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
Regards,
Rajesh Banka
Reward points if helpful.

Patch compliance report for all machines in collection

Good day to all,
We are trying to create a report in SCCM 2012 that will show us all missing updates on all computers in collection. But we would like to display in this report only patches which are really targeted to the machines in collection. Let me explain.
We have multiple deployment groups for patching (OSD, Servers, Client, Test waves...) and current issue we have with all build in reports is that you have to either select one of these deployments and then select a collections - but this will give you only
status for current group of patches, for another one you have to select different one. And if there is a report where you have to select only collection the it will show all updates which are in deployment (this is not nice as for OSD we are putting some extra
patches to the image and then these patches are shown as missing on all machines - but they will stay that way as we are not deploying them...yet). The ideal report for us will be to select the collection and then show all missing patches that are targeted
to that collection. This was accomplished by this query:
SELECT
vRS.NetBios_Name0 AS 'Hostname',
Count(DISTINCT vUI.ArticleID) AS 'Missing Patches'
FROM v_UpdateComplianceStatus vUCS
INNER JOIN v_CIRelation vCIR ON vUCS.CI_ID = vCIR.ToCIID
LEFT JOIN v_AuthListInfo vALI ON vALI.CI_ID = vCIR.FromCIID
INNER JOIN v_UpdateInfo vUI ON vUCS.CI_ID = vUI.CI_ID
LEFT JOIN v_R_System vRS ON vUCS.ResourceID = vRS.ResourceID
WHERE vUCS.ResourceID IN (SELECT vFCM.ResourceID FROM v_FullCollectionMembership vFCM WHERE vFCM.CollectionID = 'CAS00296')
AND vUCS.Status = '2'
AND vALI.Title LIKE 'SWU Workstations ENG%'
GROUP BY vRS.NetBios_Name0
ORDER BY 2
However, if we would like to add more columns, like Reboot Pending, Failed, Installed, Not Needed... then the report will start to show incorrect data, e.g. for machine which is fully patched and according to "Programs and Features - Show installed
updates" have 235 patches installed it will show only 198 patches installed and 10 missing.
It have something to do with JOINs between tables but we are at the end of ideas how to proceed further (we already checked the official documentation for SQL tables in new SCCM).
Have any of you created a report like this? I tried to Bing/Google for hours but most of the reports are for SCCM 2007 and showing incorrect data.

Almost all SU reports created for CM07, still apply to CM12.
http://www.enhansoft.com/

I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones

I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones
Any clue, how i can add a mail account to apple mail app, but with separate password / pin to open it.
Years ago there was a program called mail switcher which added this functionality, but thats gone.
cheers
Tom

They would have to be logged in as separate users in order not to see your account in Mail. Whatever accounts put in Mail under your account will show up. All mail accounts usually have there own user and password. The only thing you can do is to remove the password from Keychain and take the account offline so you don't keep getting prompts for passwords each time it checks for mail.
Not a great solution.
Best way is to give the other user their own user account with their own mail and enable fast user swithcing to log between the different users if all access the computer frequently.

Report for All PO by All User

Similar Messages

Maybe you are looking for