REPORT for Lead Questonnaier.

Hi CRM Gurus,
I want to generate a report which gives the details of the questionnaier for leads created in the given date range.
the questionnaier which is in the evaluation TAB of the lead transaction.
please help me in finding the table name and fieldname where the questionnaier and its answers are stored wht is the logic i have to apply to do this.
its very urgent please help.
thanks in advance.
Chandrra

Hi Chandra,
There will be integration between CRM and BW system and this your basis consultants will do.
Once the integration is set up and when you have assigned the questionnaires to the lead transaction and when you evaluate the survey, then the survey will have qualification is generated and these values will be populated in the BW system in a specific datasource.
So the BW system will pull the values from CRM.
http://help.sap.com/saphelp_crm60/helpdata/en/46/35bcc88578141ee10000000a1553f6/frameset.htm
Thanks
Srini

Similar Messages

  • Standard report for leading prod. order with variance  value  & qty.

    Hi Gurus,
    I am searching for  a standard Tcode to get the variance value/Qty against all the leading production orders which are settled in a particular period.
    Note: If a leading production order contains more than one sub orders then the qunatity of sub orders should merge with the leaing order and all the variance from individual sub orders should also merge with the leading production order.
    Please suggest the tables and fileds are used for storing the leading and non leading production order and its corresponding Planned/Actual and Variance values.
    Please guide me.
    Regards,
    Ramakant.

    Hi,
    Thanks for your early response.
    Actually i am unable to use tcode: KKBC_ORD rather able to use KKBC only.
    Using KKBC (Target/actual/production variance) and activating collective order from setting option only able to see the details for a particular leading production order only relating toa  particular period .
    My requirement is to display all the production orders settled in a particular period along with (Material code /order number/ Qty/Actual value and variance value).
    Note: If any leading order exists then that should be collective order i.e.(value and Qty should come against the leading order number).
    If there is any standard tcode exists please let me know else provide the tables and logic to bui;d up such a report.
    Regards,
    Ramakanta

  • Re: report for lead time of material

    Dear Gurus,
    I just want to know is there report to see the lead time of material. Kindly suggest me which is the t-code available
    Regards,
    Rajashekar

    Hi,
    You can see the lead time in Report- MCE7 (T Code) for material analysis, here yo will get lead time delivery time of material as per Material group, Vendor,purchase Org. If you want to get material number ,after results displayed choose from menu settings > characteristic display > key & description (or just key) , then
    choose from menu settings > column width and extend the length to e.g. 59 (18 material number + space + 40 description)An alternative way is building query  taking into consideration Table MARC. Thanking you.

  • Report for GL Balances

    Hi
    I have an issue with one of our clients. The client is a subsidiary of German Company in India. The indian operations have fiscal year from March to April and german operations have operations from january to december. Is there any standard report available which would allow to view the GL balances for two different fiscal years simultaneously for the indian operations. Eg, i want to know the GL balances of a particular GL account from January to December of a particular year.
    Regards
    Sanil Bhandari

    Hi,
    If you have activated new gl in ECC 6.0, then you have an option to create a non leading ledger with fiscal year varient k4 and leading ledger with v3. Then you can have all reports under the drill down reports system which is available in ECC 6.0. wherein you can select against individual report/ gl balances etc by selecting the report for leading ledger or non leading ledger.
    Regards

  • Agewise Outstanding Report for Vendors report

    Hi All,
    In SAP, Agewise Outstanding Report for Vendors report coming with Vendor Master Details  along with Address details in the report S_ALR_87012085 - Vendor Payment History with OI Sorted List  which is not really required. Hence we need to remove all un necessary details. We need only a signle line report for each vendor like below.
    Vendor Code Vendor Name  Due - 30  days  Due - 60  days  Due 90 Days  Due  120 days and more than above
    The selection of period option is already available in std SAP. We have to change the output report only. This is rquired for Audit purpose.
    Please help me in the above issue.
    Regards
    Vinu

    Hello,
    The following example I have given is for customers.
    The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
    For Customer you go to FDI4, for vendor you go to FKI4 for forms.
    Remaining all are the same.
    Hello,
    Go to transaction code FDI4
    Select Form Type RFFRRD20 Line item analysis
    Give your form name and description
    Structure (Two axis) - as defaulted
    Click on Create
    You will have lead column
    Delete the rows 2, 3 and 4
    Double click on column 1
    Enter the customer numbers from 1 to 999999
    First column double click  (A)
    Slelect following values
    Due date analysis 1
    Days for net due date 0 to 30
    Give the short name, medium name and long text for the column.
    Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
    Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
    You prepare one more column with
    Due date analysis 2 (G)
    Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
    Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
    Characteristics you need to select are
    Account Type (Select Account Type as D for customers)
    Currency
    Customer
    Document Type
    Special G/L Ind
    Company Code
    Change the output types and options according to your requirement.
    Refer FDI2 and FDI3 for other standard reports created.
    Refer FDI5 and FDI6 for other standard forms created.
    Save your report and execute.
    Regards,
    Ravi

  • SAP Standard Report for Stock Balances

    Hi All,
    Do we have a standard SAP report that gives the output in this format (or something close to this)
    Date     Stock     Plant 1               Plant 2          
              Material 1     Material 2     Material 3     Material 1     Material 2     Material 3
    1/1/2008     Opening Stock                              
         GR                              
         GI                              
         Closing Stock                              
    1/2/2008     Opening Stock                              
         GR                              
         GI                              
         Closing Stock                              
    1/3/2008     Opening Stock                              
         GR                              
         GI                              
         Closing Stock                              
    Regards
    Tom

    Hi Jack,
    As per your report requirement, there is no standard transaction available in SAP.
    You have develop Z- Report for your requirement.
    But keeping in mind the follwoing constarints
    1) If it is a huge number of materials, Then the report will hours together. It may be lead to performance issue of the System. Because it has to get huge data from different tables as per you logic.
    2) The report is not suitable for print. Because it will run pages together.Since you are including Opening balance, GR details, GI details and Closing balance for each materail.
    Thanks & Best Regards
    Girisha M S

  • Activation the Standard reports for SAP CRM IN BW 3.5 Version

    hi guys
    I am working on SAP BW 3.5 version
    I have Activated the Satadard Reports for CRM Campaign, Lead, Opportunity in BW 3.5  Business Content
    But I don't find  the any single Standard Report in BEX.
    I followed these Steps ;
    BEX - Open - Queries - Info Area
    If any One Knows please let me Know, Urgent Requirement
    thanks in Advance
    Suma

    did u try to see that reports in metadata repository
    login to bi system
    enter RSA1
    on the left panel select METADATA REPOSITORY
    select LOCAL OBJECTS
    then hit Query
    TRY TO find ur REPORTS WITH TECHNICAL NAME
    if it exists here than u shuld be able to seee in infocube.
    if that doesnot make sense
    go back to LOCAL OBJECTS SCREEN
    hit INFOCUBE
    locate ur infocube and select it
    now everything with respect to infocube active and available is visible
    all char catalog, keyfig catalog, queries etc....

  • 1099 Misc reporting for US in SAP Standard report not containing any value

    HI All,
    In my current clients requirement is to get the SAP Standard reprort for 1099 Misc reporting for US
    1) Accordingly i have done configuration for Withholding tax for US with tax type FE
    2) There are 14 WHT Tax codes under FE , like 01 = Rent , 02 = royalty, 03 = other income etc.
    3) Assigned Tax type  with Co. Code
    4) Activated WHT tax at Co. code
    5) Created WHT country US
    And also assign WHT tax type FE and respective tax code to vendors in Accounting info in Vendor Master
    Posted couple of vendor invoices and made payment for those also
    Then after this when i run the SAP Standard report for 1099 Misc reporting for US , then the output contains with no data..  but only contains vedor names and WHT tax code which i have assigned..
    I think i have missed some configuration may be . Can any one let me know the detail step by step config and process how to get proper out put in 1099 Misc reporting for US in Standard reporting..
    Regards,
    Sandip

    Hello auroar,
    I followed the path that you provided and that lead me to this part of the tree: Define File Format for Withholding Tax Reporting...This is where I found the information that I needed.
    Thank you very much.
    -Patrick
    Edited by: Patrick Smith on Oct 22, 2009 8:41 PM

  • Reports of leading & non -leading ledgers are not matching

    Reports of leading & non-leading ledgers are not matching in the trial balance
    report from t.code S_PL0_86000030 . Both should be matched but not matching. Leading ledger report
    has been taken by giving the data (Currency:10, Company code: IN06,
    Ledger: 0L, Fiscal Year: 2008, From period:1, To period: 16)
    And non-leading ledger report has been taken by giving the data
    (Currency:10, Company code: IN06, Ledger: AI, Fiscal Year: 2008, From
    period:1, To period:9)
    And account codes are not same in both the reports. If one account codes
    is there in one report it is missing in other report.
    Balance sheet for the period from April 2008 to March 2009 has to be finalised based on the non-leading
    ledger report.
    1.Non-leading ledger is acitivated .Fiscal year activated Jan to Dec-K4 .IN this case  how can I enter the periods for  to view  leading ledger and non-leading leader reports and compare the reports.
    help to solve the issue.
    Regards
    dharmendar

    Hi,
    Thanks for your inputs. I have 2 queries here...
    1. Whether the reports S_ALR_87013542 & CN41 are same displaying the same information?
    2. How can I check the Balance amount still remaining in the project? Is there any report?
    Thanks & regards,
    Bala

  • Custom reporting for UCCX 7

    Hello there,
    I am looking for easier ways to generate custom reports for UCCX 7, I am asking incase I go away an spend heaps of time programming stored procedures and crytal reports if there is a report pack out there or some documentation to make it a bit easier.
    Our call center team leader is asking for reports to be written for the system or modification of existing reports as the ones included are either too crowded with information or do not display what we actually want.
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    As an example, there is a report called ‘Agent Not Ready Reason Code Summary Report’, this report lists some not ready codes such as 32756 etc.. (i.e. Pre-defined system codes), however we want to list our own not ready codes as well as remove some of the system ones from the report as we don’t really want them there.
    Another example is the Agent state details report, one of the columns is 'Reason Code', this is fine, however it would be nice to have a summary at the end of the report for a total count of each not ready code (with the not ready code name not just the code).
    Is there anyone out there who has written/customised reports for UCCX or know where I can find some more documentation? I have searched around but not found anything, Cisco TAC have said that they only deal with the connection of Crystal Reports to UCCX, the coding itself and help with regards to that you are basically on your own with.
    Thanks

    Hi
    There are other ways of reporting, but you are still on your own with it unless you find someone who writes a package. I'm not aware of any...
    Re your specific queries though:
    ‘Agent Not Ready Reason Code Summary Report’ - when running the report, you can go to the 'detailed' tab, and on that tab you can select 'Reason Code' as a filter and pick the codes you are interested in.
    Also that same report shows the summary (i.e. totals) of the time in those reason codes doesn't it? So that's what you wanted to see on the other report?
    Final point (and this is a common one that comes up) is that for some reason the 'reason' codes only appear as numbers in the DB. There are no lookup tables where you can link them to names for reporting. This basically means the best you can do is to edit the Crystal templates so that the static table listing the codes at the top of the report has the codes you have configured. Obviously this isn't dynamic, but it is easy as far as Crystal goes...
    Hope this helps
    Aaron
    Please rate helpful posts...

  • Opening for Lead Web Programmer in IT Security and allied services at Mumbai

    Currently we are looking for Lead Web Programmer with US based leading organization engaged in IT Security and allied services at Mumbai.. Here are the job profile as well the company profile.
    Job Profile ::
    We are looking for an experienced high-level programmer to join our growing team. This position will be to manage a portfolio of client web-sites and the server platform it resides on. The candidate will be the primary point of for the clients and will collaborate with other team members while reporting directly to the Operations Manager. We are looking for a true “team player” to join our growing organization. THIS POSITION IS LOCATED IN OUR MUMBAI/BANDRA, INDIA OFFICE.
    Job Location : Mumbai – Bandra(West)
    Company Profile ::
    It is a Data Security and Compliance Consulting company, headquartered in California for over 16 years.
    It consults, recommends, deploys and maintains an array of IT solutions. It works with a wide range of commercial, financial, health-care, banking, education and state government entities. It is committed to developing leading-edge technological solutions for our clients’ business problems, and it has been recognized for our innovative approach to listening to our clients and providing true consultation to resolve real business problems with tried and true technical solutions.
    This is an opportunity for a Lead Web Developer/Programmer to enhance and further develop their current advanced skills, in a challenging work environment with responsibility for sophisticated and complex special projects on an on-going basis.
    Summary ::
    We are looking for an experienced high-level programmer to join our growing team. This position will be to manage a portfolio of client web-sites and the server platform it resides on. The candidate will be the primary point of for the clients and will collaborate with other team members while reporting directly to the Operations Manager. We are looking for a true “team player” to join our growing organization. THIS POSITION IS LOCATED IN OUR CLIENT’S MUMBAI/BANDRA, INDIA OFFICE.
    Requirements:
    BS in Computer Science/Engineering or equivalent
    10+ years Experience required in programming PHP + MYSQL + MSSQL + .NET, HTML + JAVA HTM L, Java script
    10+ years Experience required in IIS & Apache Environment
    5+years experience working with various CMS (ex:Word Press)
    5+years experience of CSS
    Experience working with Web Hosting Management Tools (ex: c Panel, Parallels),preferred but not required
    Experience managing large portfolio of web-sites, preferred but not required.
    Excellent English communication skills.
    Ability to work effectively in a team-based environment and a demonstrated
    willingness to support team on all levels to get the job done.
    Working Hours : NIGHT HOURS for PERMANANT BASIS.
    If you are interested for this profile, kindly send your updated resume on [email protected] with Current CTC & Expected CTC.
    Click here for more details
    Regards,
    TheindiaJobs.com
    Like us on Facebook
    Follow us on Twitter

    Please note the name of this board "LabVIEW Job Openings", not general IT or programming openings. While there are people who's skill sets might overlap your requirements and those of a LabVIEW programmer, the vast majority coming to this board are looking for LabVIEW specific jobs, which is what the board is set up for.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Submitting bug reports for linux player

    hello,
    we're in the process of improving the
    feedback
    form to better collect your input on the linux version of flash
    player 9. while we are waiting for these form updates to be made,
    please use the "Problem description" field near the top of the form
    to provide additional information such as:
    * distribution and version
    * browser and version
    * any mutant library configuration (other than those included
    with distribution)
    * camera/microphone type (if applicable)
    this information will greatly help our QE team in reviewing
    and reproducing your issues, which leads to issues getting fixed
    faster.
    thanks!
    jennifer
    (adobe's flash player program manager)

    Anyone have any idea how to submit a bug report for Oracle XE.Posting bug description in this Forum should be enough.

  • XL report for Bank reconciliation

    I was wondering has anyone worked on a XL report for previous bank (external) reconciliations which shows not only the history but also the accounts which have an outstanding balance and not been reconciled. Is there any other way of reporting this.
    Thanks

    Shelipa - finally found the version they used in production:
    <b>SELECT
    T1.CheckAbs AS 'Check Num',
    T0.TransId AS 'JE Num',
    T0.BtfStatus AS 'Stat',
    T0.BaseRef AS 'JE Ref 1 Field',
    T0.RefDate AS 'Post Date',
    T0.Memo AS 'JE Notes Included',
    T0.CreateDate AS 'Create Date',
    T1.Debit AS 'Debit $ Amt',
    T1.Credit AS 'Credit $ Amt',
    T1.ExtrMatch AS 'Recon Indicator',
    T2.AcctName AS 'GL Account Name',
    T2.Segment_0 + ' ' + T2.Segment_1 AS 'Acct Num',
    T2.Finanse AS 'Cash Acct?'
    FROM OJDT T0  INNER JOIN JDT1 T1
    ON T0.TransId = T1.TransId
    INNER JOIN OACT T2
    ON T1.Account = T2.AcctCode
    WHERE T1.DueDate >= '01/01/07'
    AND T1.CheckAbs IS NOT NULL
    AND  T1.ExtrMatch = ' '</b>
    This is the report they used with the auditors doing some work with their company.  I guess the best would be to see what other information your customer might want to pick up from the Journal Entry Window (which is where the golden drill-down arrow under field "JE Num" leads to)...
    Good luck and let us know if it worked for you...sure hope this is what you are looking for!
    Zal

  • Seek query to display report for transformation mapping

    Hi,
    There is a requirement to display a report for mappings between ODS's and Cubes in the following structure.
    Target field                      Target field data type                  Target field description                   Source field
    This is not a final requirement (don't have to present to the client), but this will lead me to the end requirement. I'm quite flexible with the input for executing the report as I have ID's of both source and target ODS and cube, and also transformation ID for that matter. There is joining of tables involved but as I'm a rookie in this technology, I've limited knowledge of the table names and ABAP for that matter. Kindly help me build this report.
    Regards,
    learner

    Hi Veerendra,
    Thanks for responding. I could get the infoproviders fields from the table RSTRANFIELD. Description of the corresponding IO can be taken from the table RSDIOBJT, but the problem is with the datatype. I could not find a table that gives datatype of an IO. The only solution is reading the text table of an IO, i.e. /BI0/Txxxxx where xxxx is the IO name. I got the tables identified but I'm finding it difficult to join them.
    Regards,
    Learner

  • Report for Qty Contract and Value Contract with PO release exceeding limits

    Hi All,
    Is there a std report in SAP that the users can use to view Qty and Val Contracts that has exceed in Qty (in case of Qty Contracts) or Val (in case of Val Contracts) ?
    Thanks in advance!

    hi Duke,
    If thinking logically, then there is no report for the same..this may be because you enter the qty or value limits in the contract doc itself....So, when you make the PO for the same, and if the qty or value exceeds the system automatically provides the message..stating that the qty or value has exceeded....
    So, there is no report for the same...
    Hope it helps...
    Regards
    Priyanka.P

Maybe you are looking for