Report for planned or prodcution order for production in Alternate plants

Hai gurus,
I have two plants - X and Y
Plant x have finished goods A and B to be produced and procured from plant - Y
plant Y have finished goods C and D to be produced and procured from plant - X
The production in alternate plant concept is used in plant X for Product A and B
The production in alternate plant concept is used in Plant Y for Product C and D.
Now my requirement is how to get the report for the Purchase order raised by the
plant X for the Finished product A and B , also how to know the planned order
and production order with reference to purchase order for Finished product A and B
under plant - Y
and VIce versa for the Finished product C and B in plant X and Y
Waiting for the positive reply.
Regards,
Sekar chand

There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
You can view the pegging dynamically, for example in MD04.
Edited by: Mario Adler on Oct 27, 2011 12:13 PM

Similar Messages

Release order for a stock transfer order in Product view

Hi Experts
My question is that i cann't see Release order for a stock transfer order in Product view which are available in MD04 in R/3.
I have checked all the settings for Strategy group 50-Planning without final assembly in R/3 and Requirement type in APO. In APO I have checked requirement type and category group and I can see that in category we have defined Stock Transport Requisition, Stock Transport order, Sales Order, TLB:VMI sales order, Replenishment delivery and VMI delivery as category.
One more thing i am not even selecting any selection profile for Product view.
What i need to check, Kindly suggest.
Regards
G C

Hi G.C
Check whether you have maintained correct integration model. Create integration model for transactional data. Select the sales order and PO/PR option in CFM1. The reason you need to send the sales order first when you are working with stock transfer order/stock transfer scheduling agreements you first have to send the sales order and then PO/PR. Activate the integrtion model.
First check in ECC for the Integration with Other mySAP.com Components==>Advanced Planning and Optimization==>Initial Data Transfer==>Change Transfer==>Change Transfer for Transaction Data==>Activate Online Transfer Using BTE==> here check (ND-APO, NDI options are have been checked)
Also check for the Maintenance of distribution definiton under APO -SPRO==>Integration with SAP Components==>Basic settings for data transfer==>Publication==>Maintain distribution definiton==>Select the publication type(External procurement, Delivery,Shipment) and assign to all the plants you are working with for STO.
Try the above steps and do let me know if it worked.
Regards
KRN

Good receipt for Production in alternate plant

Hi,
I have scenario where i have using production in alternate plant. when i do GR in production plant the stock is getting updated in planning plant.
But physical material movement from production plant to planning plant will take 2days.
Is there anyway i can do GR in production plant and then do plant to plant transfer, so that i can ensure there is no mismatch between to physical stock and system stock.
or
is there any other process to overcome this problem.
kindly give a solution..
Thanks and Regards,
Sen

Hi,
SAP Help
Stock Transfer from Plant to Plant
Within the stock transfer procedure, goods are produced and delivered within a company. The plant that is to receive the goods (receiving plant) orders the goods internally from another plant that is in a position to deliver the goods (issuing plant). The dependent requirements for the components to be transferred are determined in the receiving plant.
You use the stock transfer procedure, if two plants are located far away from each other, as the transport of materials to be transferred is taken into account in MRP with this type of procedure
So , pls try with 40 - Stock Transfer from Alt plant . Then , you can use combination of either 303 & 305 or 351 & 101 .With this procedure , there will be no mismatch bw the physical stock and system stock in the receiving plant.
also refer ,
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm

Report to view pending Purchase Order for Release

Hi,
Is there any sap standard report through which we can view pending Purchase Order for Release.
Regards,

Hi,
you can use transaction ME28, this can give information of pending purchase order for release on release level.
but this transaction is used for releasing the collective release for purchase order. this is not an report.
if you want transaction for reporting purpose only, you need to create a report or query on EKKO table. based on release indicator.
vikas,

Considerations for setting up Return Order for Discontinued Product

What are your thoughts on implementing a process to allow discontinued materials on return orders for product repairs? Some considerations we have encountered are below; please reply if you have thoughts on any/all:
-- how to allow the discontinued product on a return order but not on a regular sales order (we were thinking one option would be to customize listing/exclusion table functionality to include sales order type and set up condition records that include just the return order type + customer + material combination?)
-- how to allow the discontinued product to be restricted to just the customer who is returning the material (listing/exclusion sounds like the way to go here)
-- how to properly discontinue a product that might come back for warranty repairs (ie, should it be a certain material master flag rather than the flag for deletion in a plant?)
-- if returns come back to a different plant (even a virtual one), would that make any of this easier, especially wrt flagging for deletion?
Thanks and regards.

Hi,
how to allow the discontinued product on a return order but not on a regular sales order (we were thinking one option would be to customize listing/exclusion table functionality to include sales order type and set up condition records that include just the return order type + customer + material combination?)
how to allow the discontinued product to be restricted to just the customer who is returning the material (listing/exclusion sounds like the way to go here).
For both of the above, you can use user exit USEREXIT_SAVE_DOCUMENT_PREPARE (program MV45AFZZ).
how to properly discontinue a product that might come back for warranty repairs (ie, should it be a certain material master flag rather than the flag for deletion in a plant?)
- When the product is received in the plant/warehouse, put the quantity in blocked stock. Check with MM/IM, on disposing the stock (write-off) at regular intervals
if returns come back to a different plant (even a virtual one), would that make any of this easier, especially wrt flagging for deletion?
Yes that can be an option. Alternatively you can create a storage location (virtual) in plant, and you can write off the inventory. Creation of storage location is easier than creation of plant in the system
Regards,

Different Tax base in pricing procedure for a single sales order for different line item material.

Hi,
I have a scenario wherein in a sales order, for two different material, the tax base of pricing should get triggered on the basis of sold to party and the material entered at line item level.
Logic triggers on the basis of Region of Customer & a unique field in the Material Master but problem comes in the calculation of Tax base as the sequence of condition type (from – to) is already defined in the pricing procedure to pick from a particular step but in second line item the base is different i.e. the sequence of condition types that are maintained in pricing procedure should be different for Tax to calculate differently.
Kindly suggest if the same can be handled in a single pricing procedure and dynamically taking care of condition type sequence through Alt Cal Base Formula, so far I’ve tried both Alt Cal Formula & Base but it is not working
Client doesn’t want to go ahead by creating two different orders (through separate Pricing Procedure) for that. They want to have both materials in same order.
Kindly suggest a suitable way to handle this scenario.
Regards,
Aashika Agarwal

Hi,
Click on the ''check availability'' button at item overview and then click on ''One-time delivery'' on the top. This will ensure that you will have only one delivery for whatever quantity is confirmed on that date.
If you want to apply this rule for all orders across a sales area, then you can do the below configuration step :
SPRO->sales and distribution->basic functions->availability check with ATP logic->Define default settings-> Here in avail. checking rule select A (one time delivery). This will ensure that all orders created for a particular sales area will have only one delivery.
Hope this helps.
Regards,
Palani

Customization for create 2 Work orders for different vendors against 1 PR

Hi,
What are the customization settings to create 2 work orders for 2 different vendors against 1 PR with half-half quantity?

thank you Mario.
Actuly its infrastructure cmpany & user wants create Purchase order(service work order) for two different vendors with reference to single PR with alocating 60% quantity to 1st vendor & remaining 40% to another vendor.
user allready created Po for 1st vendor (60% Quantity).
Now system showing error " Quantity is allready full for reference PR"
I want to know what is the procedue to solve this issue & customization.

Make-to order with production in alternative plant

Hi,
We are thinking about implementing a scenario with Make-to Order production for our products, but with production in alternative plant (special procurement type 80).
For example, sales orders will be directed to plant A, but production should take place in plant B - and using a make-to order strategy (in our case planning strategy 50 - planning without final assembly).
Is there any problems with our approach, making it not feasible to implement? Is it even possible in SAP to combine MTO with special procurement key 80 (production in alternative plant)?
Is there any other issues that can be foreseen with using this type of production strategy?
Thanks in advance,
Lars

Hi,
The production strategy which you are going to use is very fine.
As per me there is one concern. Example you have created a sales order in Plnat A, in plant A that FG is handling through Special procurement 80, then in the MRP run system will be creating a planned order in Plant B without running MRP in plant B. In MD04 screen you can see planning plant as Plant A. In plant B, u r converting this planned order in to Production order and executing the production. While doing the GR against the production order, the goods receipt will happen directly in Plant A.
This is the one problem (Accountability) you can face.
Regards,
V. Suresh

Sales Order and Production in different plants

Dear Experts,
I have a scenario where Customer specific Sales orders (MTO) will be created in one common plant, whereas production can happen in 2 other plants.
The common plant doesn't physically exists and is created in SAP to cater common requirements (raw materials, plant equipment, shared services, common items etc).
There are 2 ways to create Sales order:
1. Create order for both production plants in individual plants. (In SO line, specify the individual plant)
2. Create order for the common plant. The requirements should be distributed to both the production plants.
If I go with the 2nd option, SD, LE and QM will not have pain areas.
But, when i run MRP, the SD requirement will show in common plant. How can I transfer that to production plant?
I do have PIRs in individual plants. The same should be reduced as well.
I can create an so specific order though CO08, which is not preferred. Is there a way to auto-convert the requirement to another plant?
Thanks
Prem

Hello Prem,
Quota arrangement with special procurement type P ('Production in alternative plant')
As suggested you can use the Quota arrangement in this case along with special procurement key production in alternative plant
Production in Alternative Plant - Special Planning Processes - SAP Library
The customizing for the special procurement SPRO -> Production -> Material Requirements Planning -> Master Data -> Define Special Procurement Type for both required plants.
For quota arrangement which has a special procurement P - Prod. other plant" defined in MEQ1, you should make sure that the field "procurement plant" is correctly maintained and percentage.
Quota usage should be 4 in material master. Please test this for PIR consumption BAdi 'MD_PIR_FLEX_CONS' will be helpful
Please see note 1967124 - BAdI enhancement for flexible primary independent requirements consumption/reduction.
Best Regards,
R.Brahmankar

Report for Planned vs Purchase Order(Qty and rate)

Hi
I have the following issue. My client is raising Purchasing requisition and Purchase Orders in Me51N and ME21n respectively. The Project Structure is used only to plan the quantities and rates whereas no PR is released from it. But the components are attached. Now if i make use of the code CN52N, i am getting the planned quantity and unit rate for the planned value whereas no Purchase requisition number or purchase order number is updated in it.
My requirement is that both planned quantity, rate along with Purchase order quantity and rate should be available in a report.
1. Is there any setting that we can make so that the details are updated in cn52N (or)
2. is there any other report with those details (or)
3. Should that be achived only through ABAP.
Please suggest.
Raghav

There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
You can view the pegging dynamically, for example in MD04.
Edited by: Mario Adler on Oct 27, 2011 12:13 PM

Make Deletion Status for Operation in Prodcution Order

Hello Experts,
Is there any Function Module or BAPI to make status for Operation as deletion in production order. i.e I0013 is the status for the operation.
Thanks In Adavnce
Dhiraj Dangore.

Hello,
Thanks for reply..
Let me explain the process we are following
I have two operations in an order.
Operation 1) Control Key M111(Internally Processed) - One component attached for this operation ( its a not stock item)
PR, PO and GR has been done and no issues in that.
Operation 2) Control key M222( Externally Processed) -
a) One Service attached with this operation which i want to delete from the order.
b) One Component also attached ( non stock item) and PR , PO, GR has been done for same.
For point a : Service is present in PR but not released therefore no PO , GR is done.
Now when i try to delete this serive from the operation then system does not allow me to do so. Also i want to delete from PR too and again i was not able to delete from it.
Please let me know how this can be possible.
Rgds
Himanshu

Report to show all purchase orders for which invoice tolerence is greater than 3%?

Hi Experts,
Recently our company cofigured 3% tolerence limit for invoice.Now, I have got a requirement to create a report to show all the PO's for which the
invoice tolerence limt is eq 3 %.Kindly anyone advise ,is there any table that stores the inovoice tolerence limit based on PO? How to achieve this requirement.
Thanks in advance
Thanks & Regards,
Anusha.B

Hi,
I was wondering don't you have in your company MM consultant who suppose to give you the required tables name .
Regards.

Customized RF transaction for Confirmation of Transfer Order for WM

Hello everyone !
I need to develop a customized RF transaction for tcode LM05 and LT11. where i need to call custome screens for
1. Select transfer order - ( which will fetched from any handheld device like BARCODE scanner )
2. Navigate to screen SOURCE INFORMATION - Multiple Materials on pressing on NEXT button the control goes to
3. Destination Information - Multiple Materials and on ENTER pushbutton the TO gets confirmed.
Basically i need to create ZLM05 and do the above.
Please can any one provide the steps to achieve the above funcitonality ,
Thanks & Regards,

Solved

In Shop Floor Management can I setup a shop dispatch list for upstream and downstream orders for a department or resource? Capacity for a department?

Have a client that requires detailed dispatch information for upstream and downstream lot based jobs in Shop Floor Management module. Also visibility into capacity for a department or resource. Is this possible using only Shop Floor Management
Post here or contact [email protected]

Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

Delete CVC for Planning object structure relevant for DP BOM

Hi,
We have created a new client. The selection BOM char comb ID and BOM Prod Type (I/O) values are not availabe in program Delete CVC combination.
Is some configuration is missing.
Kindly advise to resolve this issue.
thanks and regards
Murugesan

Hi Raj,
Your question is as below:
How the system knows or where i need to tell my demand from demand planning book X need to transfer
SNP planning book - 9ASNP94
In the release transaction i.e. /SAPAPO/MC90 , we need to give the target version .
Each version is assigned to exactly one Planning Area( though one PA may have more than one versions. Secondly at a time only one version will be active and in SNP / PPDS the Active version is always '000' which is connected to SAP ERP systems.
Therefore when , we mention the version, system know the planning area.
Hope this helps.
Regards,
Datta

Report for planned or prodcution order for production in Alternate plants

Similar Messages

Maybe you are looking for