Report for PO price more than standard cost

We are currently without MM support at our plant, so I hope some one of you can help me.
The new supply chain director want a report of POs that are placed where the PO price is not equal to the standard and will thus generate a price variance upon receipt.
Query would be tough due to Unit of purchase vs MatMstr unit of measure.  I'm hoping for a standard report?
The buyer does get a warning that the two are not equal, but they enter through them.  Is there a report of warnings issues??
Any help would be great
Thanks
Althea

There is not such stadard report for this but you can check the PO price in ME80FN.
But for comparison and the diff report you have to have right the Query using
EKKO, EKPO and MBEW table
and the UOM you need to select the Order unit of the PO.

Similar Messages

  • SAP Report for Cash payment more than Rs 20000/ within a year

    Hi Friends,
    Is there any report which will help me to find out the cash payments more than INR 20,000 during the year? If not then please provide the logic to develop this report
    Thanks & Regards,
    Nainesh
    Moderator: Please, avoid asking basic questions

    Hi Nainesh
    Use FBL3N report and input your Cash Payment GL accounts which are used in FBCJ for cash payments
    It will give you a list of all payments made and you can filter the report based on amount...
    Also, you can include Vendor account as "Off setting" field.. If off set account is not available in the report, include it from Extras > Settings > Special FIelds... This will generate a workbench request which you need to transport from DEV to Production
    Also, if Offset field is not ppopulated, refer SAP OSS note 112312... This has all the steps you would need
    Regards
    Ajay M

  • Report for Purchase Price Variance

    Hi,
    Is there any standard report for finding Purchase Price Variance between Purchase Order and Material master
    regards,
    Mallik

    Hi Mallik,
    There is no std report for Purchase price variance .
    But you can check KSB1 , where you can find the Price difference which is going to your PRD account .
    You can find out your PRD G/L account .
    Now go to KSB1 . In the cost element field give the PRD G/L account .
    After executing change the layout as per your requirement .
    Now you can see the Pur Price variance for the particulat material for the PO .
    Otherwise you need to develop a customised report .
    Hope this helps .
    regards

  • Custom SAP report used to display an average standard cost per material.

    Hi All,
    I need to implement a report with the following functionality,
    This is a custom SAP report used to display an average standard cost per material.  Standard cost data is stored in SAP at the Material/Plant level.  This report will gather the individual Standard Costs at each applicable plant (restricted by selection screen input and additional logic specified in more detail in the u201CReport Fieldsu201D section) for applicable Materials (restricted by selection screen input; if not specified all materials should be returned) and calculate an average standard cost for each material.  The corresponding Currency and Base Unit of Measure will also be displayed.
    Additionally the relevant u201CCommodity Code/Import Codeu201D information should be displayed for each material returned.  This attribute is also stored at the Material/Plant level.  To determine the value of this field for each relevant material, the report logic must retrieve the values stored for each plant.  If all values are the same, the value can be output to the report.  If not all values are equal, a message u201CNot Consistentu201D should be output.  It should be noted that if all values are u201Cnull,u201D a null value should be returned in the report.
    Can any one provide me with sample code for the same??
    Thanks Debrup.

    Hello,
    Also refer this [ THREAD|Re: error in Fleet management customising] and [link|Error when recording measurements in IFCU]
    Regards
    Nav
    Edited by: Desire_Naveen on Nov 4, 2009 12:35 PM

  • List of unreleased POs with Net PO Price more than $10000

    Hi,
       How can I check the list of unreleased POs having net price more than $10000. I tried using ME2N, but it gives result of the specific net price. I want to use range of net price.
    Thanks
    Suraj
    Edited by: Suraj Sharma on Jul 30, 2008 5:42 AM
    Edited by: Suraj Sharma on Jul 30, 2008 5:44 AM

    Hi
    In the dynamic slection in ME2N , just double click on the field space, you will get the popup for mainatin selection options , you can use the Greater than or equal to symbol & input the value.
    Thanks & Regards
    Kishore

  • Is there any way to allocate a particular asset to more than one cost centr

    Hi all,
    I would like to know the posting of an asset to more than one cost center,
    is there any particular setting to configure this,
    or,
    please suggest me how to go about,
    regards,
    naga suman

    Hi Naga,
    Not sure exactly what you are talking about but if you are talking about depreciation charges to more than one cost center then it is not possible.  Asset is only assigned to one cost center on a particular date.  However that cost center can be changed as it is time dependent field.  So one month you could post the depreciation to cost center A and next month to cost center B.
    One way to get postings to various cost centers would be to use distribution in CO to accomplish your goal.  You would then post the depreciation as per normal to one cost center in the depreciation run.  Then you would set up distribution rules for that cost center and relevant Depreciation Cost Elements to distribute it to other cost centers.  By doing this the asset would always show depreciation against 1 cost center but the distribution would allocate relevant cost between other cost centers.
    Hope this helps,
    Cheers,
    Gudmundur

  • Cannot Add Invoices with more than one costing centers by SDK.

    Have no available DI Interface to access cost/profit center
    Cannot Add Invoices with more than one costing centers by SDK.

    Dear Srikanth,
    Thanks a lot for your reply.
    We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
    This is my question.
    It will be appreciated highly if you give me a solution.
    Thanks!
    Xingjun Han

  • How can I search for files with more than one keyword?

    I´ve created some keywords, and some files in my folder are tagged with two, three or more keywords.
    Is there a way to search for files using more than one keyword on the search field?
    Thanks!

    Use the Find command (menu Edit) and in criteria at the right side is a plus sign to add another criteria and set it to your custom wishes.
    make a choice in results and you should be OK

  • Can I run my creative cloud for teams on more than one computer?

    Can I run my creative cloud for teams on more than one computer?

    Hi Nick,
    We would like to inform you that you can install and activate the subscription on 2 machines, however, you cannot use both of them at the same time.
    Kindly check the point 1.1 from the below mentioned link.
    http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf
    Thanks,
    Atul Saini

  • Create pagination for table contain more than 2 PK

    Guys;
    Is there any way to use the wizard for creating FORM PAGINATION for tables having more than 2 PK??
    Regards;

    Hi dimitri;
    after the user login & start using this form thiswhat should happen to these 3 PKs:
    -1st PK will be a unique number for the questions.
    -2nd PK should be the ID for each survey ( created as global variable in Zero Page ).
    -3rd PK will be the division for this user (also created as a global variable in ZERO PAGE)..so this is the only field which will nt be changed while the user is logged..
    i tried to use the 1st 2 PKs...& set the last one to get a default value..it worked in the begining but gave me the 1st record for each Survey but my problem that i couldnt navigate to the 2nd record..& after that once i log out & relogin it willnt give me anything.
    Regards;
    ehammad

  • Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Hi,
    Did the issue happen only for you or for multiple users?
    Make sure phone update to the latest firmware.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • IPhone calendar faile to search for future events more than 1 year

    Dear guys,
    I can't search for future events more than 1 year later.
    Is it a common scenario?
    Many thanks!

    Dear guys,
    I can't search for future events more than 1 year later.
    Is it a common scenario?
    Many thanks!

  • ORA-00494: enqueue [CF] held for too long (more than 900 seconds)

    Hi ,
    I am getting this error , the database is in no archive mode and there is frequent log switch.
    However following few metalink notes I have set the hidden parameters like
    killcontrolfile_enqueue_blocker=false
    killenqueue_blocker=1
    I wanted to reduce the frequece log switch how to reduce it.
    ORA-00494: enqueue [CF] held for too long (more than 900 seconds) by 'inst 1

    One way is to make the size of the redo logs bigger and another way is to do some less work :)
    Changing Redo Log File SizesEach Redo Log File member in a Group must be identical in size. If you need to make your Redo Log Files larger, use the following steps.
    1. Use the V$LOG view to identify the current active Redo Log Group.
    SQL> SELECT group#, status FROM v$log;
    GROUP# STATUS
    1 INACTIVE
    2 INACTIVE
    3 CURRENT
    4 INACTIVE
    2. Drop one or more of the inactive Redo Log Groups keeping at least two current On-line Redo Log Groups.
    3. Use operating system commands to delete the files that stored the dropped Redo Log Files.
    4. Recreate the groups with larger file sizes. Continue this sequence until all groups have been resized.
    Edited by: TSharma on Jan 17, 2013 11:52 AM

  • Standard SAP report for purchase price variance

    Hi All,
    I need to know if there is a standard SAP report that shows the purchase price variance.
    Thanks,
    Regards

    Hi Ritika,
    There is no standard report available to compare purchase order price cost and standard cost of a material.
    You can check if FBL3N helps to resolve your purpose or not. Or else you have to make a customized report with the help of ABAP'er on the informations based on the following tables.
      MBEW
            EKKO
            EKPO
            EKBE
           MKPF       
            MSEG                  
            KEKO
            KEPH,                        
            BKPF                                            
            BSEG                                          
            LFA1         
    Thanks,
    Vasanthan

  • Report the computers has more than 3 users logged in for greater than 10 hours in a week

    I am looking for a report that gives, list of computers that has/had more than 3 users logged into computer for 10 hours in past one week.
    Help.
    Regards,
    Saravanan R
    saravanan rajappa

    I think, i have found the answer self..
    SELECT X.ResourceID
    ,X.TopConsoleUser0
    ,X.SecurityLogStartDate0
    ,X.TotalConsoleTime0
    ,X.TotalConsoleUsers0
    ,X.TotalSecurityLogTime0
    ,Y.Name0
    FROM
    [CM_CAS].[dbo].[v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP] X,
    [CM_CAS].[dbo].[v_GS_COMPUTER_SYSTEM] Y
    WHERE
     X.ResourceID=Y.ResourceID
     AND
     X.TotalConsoleUsers0>=3
     AND
     X.TotalConsoleTime0>=600
     AND
     X.TotalSecurityLogTime0>=3840
    Is the data coming out of this query right?
    saravanan rajappa

Maybe you are looking for

  • Inventory Cube Compression - Non-Cumulative

    Dear All I have loaded setup tables in R/3 BX as on date             TAC MCNB1 BF i.e. Historical         TAC  OLI1BW UM                            TAC OLIZBW I have loaded the Inventory Cube form all the three Data Sources 2LIS_03_BX : Initial Statu

  • Communication Channel in error

    Communication Channel in error though the error has been resovled. New files are processed succesfully !!! CC still in RED. I tried the basic steps which can change the status .( by deactivating the channel and activating the same , stopped and start

  • Error while to trying to retrieve text

    Hi, I created a web site using pl/sql, with the Apache Web server and the mod_plsql, but sometimes, when I browse on the pages , I have this error: Error while to trying to retrieve text for error ORA-03113 I also have problems with words like "h", "

  • Select problem in the JTextArea

    Hi I have a problem on the select(), I am trying to select multiple lines of text in the JTextArea, but select(int start, int end) can only select single line, int end will be cut to the length of the line instead of going to the next line. Can anyon

  • HI can anybody   facing  IDOC'S ISSUE

    HI can anybody   facing  IDOC'S ISSUE    SEND IT TO ME  I WILL SOLVE   FOR YOU THANKS AND REGARDS RAJU