Report on Total Authorization Duration

Need to know how to show total authorization duration, which includes several auth tasks that vary depending on information in the form.
In For some reason I am finding it really difficult to find the total duration for each service request. In query studio, I pull in req entry id, Auth Task Name, and Auth Task total duration. Everything appears fine. From here I should be able to group by req entry id, then delete task name, and format the duration to calculate. My issue is that I need to filter by Service name. I bring in Service name and everything goes to pot. Req entry id's now show auth task names for auth tasks that they did not have. Tasks that were skipped, which should show duration as 0, have appearingly random numbers.
Is this a bug, or is there something I can do differently? I want to be able to measure the total auth time, so I can see overall how long it takes to get different types of services approved. We're running requestcenter 8.3.

Hello Varsit,
There is not stardard report available for this information, but you can link EKPO, EKBE (PO history) table and MARD table to get this information. For Purchase requisition, you can use EBAN table.
Hope this helps
Regards
Arif Mansuri

Similar Messages

Help me in 'AR Details ' report shows total open invoices by customer

hi friends,
please help me in 'AR Details ' report shows total open invoices by customer and PO number over selected time range.
any thing related to open invoices please send me as early as possible.
Thanks,
Regards,
Yogesh

Hi,
Find the T.code VF05. You will get the list of open billing docs. Its SIS report. Please find whether the SIS is active or not in your system
Regards,

Report of Total GR qty/IR qty,date when last GR was passed (latest one)

Dear all
Kindly let me know how to get the below report using input of PO no:
Report of Total GR qty,IR qty,date when last GR was passed (latest one),date when last IR was passed (latest one)
Standard t.code such as ME2n.me2l is not giving the above report.

Dear
Try ME80FN and ME2N/L with the setting with Selection Parameters
regds
dev...!

How to diable the default option of report-based total (when applicable)

Hi,
Anybody know how to diable the default option of report-based total (when applicable)?
By default this aggregation rule option is checked.
There should be some configuration tag in instanceconfig.xml or somewhere else, such as <ReportAggregateEnabled>true</ReportAggregateEnabled>?
Regards,
Tina

you can change this from admin tool,
open admin tool,
business model and mapping
find your column in the model
double click your column, click on aggregation, >> default rule >> none.
but if you do this, you cant make any sum operation.

In OBIEE Report Grand Total instead of Average(Average) use Sum(Avg)?

Hi All,
In OBIEE Report Grand Total average always shows Average of average (Default) "avg(avg)" , can i overwrite this functionality to sum of average "sum(avg)".
Thanks in advance
Regards
Kandasamy

Hello,
You can try the following:
Remove the calculate result as setting for the three KFs.
In exception aggregation set property to average with ref char as leave start date.
Check if it works.
If the above dosent work, set reference char to emplyee ID and check.
Either one of them has to work
REgards,
Shashank
Edited by: Shashank Dighe on Apr 2, 2009 9:03 AM

Report of total invoice per area

Dear Experts,
I am trying to make a report using query generator. The report is total invoice per area but I am still failed. here is the query I made:
elect distinct OTER.descript,
'invoice per teritory' = (select distinct sum(a.DocTotal) from oinv a inner join ocrd b on b.cardcode = a.CardCode where a.CardCode = OINV.CardCode and b.County = OCRD.County group by b.County) from INV1 inner join OINV on OINV.DocEntry =
INV1.DocEntry
INNER JOIN OCRD on OCRD.CardCode=OINV.CardCode
     LEFT JOIN OTER on OTER.territryID=OCRD.Territory
where OINV.DocDate between '01/01/2010' and '01/28/2010'
The result is as follows:
Area A     47533700.000222
Area A     53663149.964662
Area B     772500.000010
Area B     6705000.000072
Area C     7890000.901213
It is not expected.
I am using query generator is :
Area A     101196850
Area B     7477500
Area C     7890000.901213
but my query still give unexpected result. Please advice. Thanks a lot.
steve

Thx Gordon.
This thread is closed. I also find out the answer i.e.
select distinct OTER.descript,
'invoice per teritory' = (select distinct sum(a.DocTotal) from oinv a inner join OCRD b on b.CardCode = a.CardCode where
b.Territory = OTER.territryID group by b.Territory) from OINV
INNER JOIN OCRD on OCRD.CardCode=OINV.CardCode
     LEFT JOIN OTER on OTER.territryID=OCRD.Territory
where OINV.DocDate between '01/01/2010' and '01/28/2010'
group by OTER.descript, OTER.territryID
The result is similar with your query result.
Steve.

Sub-Report Running Total

Post Author: Set_Shot_Dave
CA Forum: General
Hello All,
Let me set up my problem first.
I have a running total from a subreport and a running total from my main report.
I shared my running total from both reports ( it didn't work when I did or didn't).
when I do my calculation I get a boolean true as my answer.
By the way my running total from my main report is controled by a formula.
In subreport I did the following;
Called the formula share1
shared numbervar Cong1;
cong1 = sub-report-running total
in main report i did the follwing
called the formula share2
shared numbervar Cong2;
Cong2 = main-report-running total
Still in main report
I create a a field called Calcuation
shared numbervar Cong1
shared numbervar Cong2
numbervar calculation
calculation = Cong1 / Cong2
I get a boolean True

Post Author: Set_Shot_Dave
CA Forum: General
I brought in the shared variable into the report on its own.
No calculation just a formula field as followed
@calculation
shared numbervar share1;
numbervar calculation;
calculation:= share1
I get 0.00
The fields are in the report footer of the main report and report footer of the sub-report is there a problem with this
the

Report Based Total - when??

Hi,
sometimes I get the issue that when I put totals on groups in reports they are only correct when I have un-ticked 'report based total', but at other times, sometimes with the same source, it works fine....
I have trawled the site on advice around report based totals, but can anyone give me a definitive rule for when 'report based total' will definitely work, and when it will definitely not work, and if there are any areas of grey between these where the 'safer' option is to un-tick report based total.
My reason for the request is that I am putting together an answers guide which includes specific advice on our repository, and I would like to be able to give the advice, against each business area of whether to use 'rbt' or not.
Finally am I correct that the only benefit to using report based total is one of speed?
My version is 10.1.3.4
Many thanks,
Robert.

Hi,
This will be used for "Oracle BI Server will calculate the total based on the entire result set, before applying any filters to the measure columns".
Refer:
http://docs.oracle.com/cd/E14571_01/bi.1111/e10544/creatingviews.htm
http://gerardnico.com/wiki/dat/obiee/11g
http://gerardnico.com/wiki/dat/obiee/answer
Thanks
Deva
Edited by: Devarasu on Dec 20, 2011 5:29 PM

Report Sub Total

Hello all,
I need your help again:
I have a report as listed below. I have a 'After' total flag set on DESCRIPTION column. For some unknown reason
Actual Total per EACH DESCRIPTION calculated correctly, whereas Budget carries over the total of the first row???
Any ideas why? Thank you all in advance. Sonya
REPORT_DEPT DESCRIPTION Actual Budget
ENGINEERING 6040-Agency Approval $100 $200
6040-Agency Approval $100 $200
6050-Air Travel $50 $700
6050-Air Travel Total $50 $200
6060-Car Travel $20 $300
6060-Car Travel Total $20 $200

please check fx of budgets column and set aggregate to sum.
(or) check with enabling report based total below after.

POS system reports daily totals for each store, not for each cashier

Hi!
We are implementing SAP Retail (ERP 6.0 EHP4 stack 3), SAP PI (Netweaver PI 7.1 SP 8) and SAP BW (NetWeaver 7.0 ehp1 stack 4, incl BI content 704, SP 3 ) for a client. Their POS system is a 3rd party system, i.e. not SAP POS.
This issue concerns the fact that the POS system reports daily totals for each store, not for each cashier.
At my client, the daily settlements are done for each cashier. At the end of day, we will get cash drawers counted with sum of each tender (cash and checks) at the end of day. In addition, the POS system will send sum of each tender, sum of all sales and sum of different finance transactions made each day. However, this u201Ctotals messageu201D is not sent separately for each workstation, or for each cashier, but rather for each store. So we only gets the totals per store.
Questions:
i)     Are the tasks available for comparing totals to the aggregates for POS transaction able to handle u201Cstore-only figuresu201D?
ii)     If not, how can we adapt the tasks so they can handle u201Cstore-only figuresu201D?
iii)     Can we trigger outbound tasks sending WPUUMS and WPUTAB using outbound dispatcher automatically, or must we run this as a manual task of an employee, after checking that all stores have delivered their totals?
iv)     The u201Cstore-only figuresu201D does not include cashier statistics. Do we need the u201Ccashier statisticsu201D as total figures, or can we just populate the BAPI for each POS transaction with data, in order to populate BW infocubes for cashier statistics?
Thanks for any advice !
Best regards,
Oeystein Emhjellen

Hi Kees ...
Your profile indicates you are running Leopard v10.5.8
You need to upgrade to Snow Leopard V10.6 in order to use the App Store. This is an "upgrade", not an "update".
Make sure your Mac meets Snow Leopard's requirements here.
You must have the minimum of v10.6.6 installed in order to access the App Store.
You can purchase Snow Leopard here > Mac OS X 10.6 Snow Leopard - Apple Store

Total Call Duration & Data Usage

I cannot checked total Call Duration and total Data Usage in windows Phone (Lumia 720). I am from India, no data sense is there. Moreover If I cannot checked then there is another option means any app from windows store?

mittalarpit1 wrote:
I cannot checked total Call Duration and total Data Usage in windows Phone (Lumia 720). I am from India, no data sense is there. Moreover If I cannot checked then there is another option means any app from windows store?
You can try the Call credit app to see if your network provider is supported.
http://www.windowsphone.com/en-gb/store/app/call-credit/cdd917a0-bef7-df11-9264-00237de2db9e

Total menu duration exceeds 7:30 min

Hi everyone,
I am attempting to burn a disc image of my iDVD project but keep getting the error message that "Total menu duration exceeds 7:30 min". As far as I can determine, i have I have eliminated all motion in the menus altogether but I keep getting the same message. The project info file indicates 16:46 of 7:30 but I don't know where that 16:46 is coming from.
I have inserted my own image over a past Theme. Could that theme still be operative perhaps and causing the problem in some way?
Thanks for any help.
Dwayne
Powerbook G4 15 " Mac OS X (10.4.5) 1.25 GHz 1 GB RAM

Hwenever something weird like that happens, I would try this first:
This frequently helps solve some problems. Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.

IDVD "Total menu duration exceeds 15 minute" error! Help!

My menu has no motion.
I do not understand what needs to be done here. How does my menu exceed 15 minutes?
Thanks!

I have tripped over the same problem however when i add up my menu times it comes in under 800 seconds. when i look at the project data file the doom fo fate total menu duration says 1300 seconds. 15 minutes being 900 seconds.
Luckily i am used ot the crappy failure nature of idvd saved multiple backups along the way so i had touchestones to play with. I also hope the **** someone at apple can get their heads out of a dark place long enough to bundle up dvdpro as a separate app. At least they should have saner failure modes on idvd. oh yea my project is 1.4 hours long and has gizmodos over the whole thing making it a very tough long project.
At any rate i edited and re-dited the project data file - deleting one menu loop after another and in final desperation edited the time down to 400 seconds. and still this thing insists that the menus are over 15 minutes.
I then and went to the dvd map and started deleting segments wholesale -- guess what the thing has lost its freaking mind -it still thinks it has a > 15 minute menu with no arms no legs no head and **** near nothing left in the dvd.
YET when i go to one of the saved versions everything looks peachy and i can burn anything i want. SO whatever the problem is its not the idvd plist in the main library or else it would behave the same for every dvd. THere is something pernicious buried deep in the project data file that i am just not going to look for any more - but some one at apple should have a clue.

Agent State Summary Report - Total login duration abnormal

Hi everyone,
We just upgrade our call center to UCCX 8.0(2). Everything seem to work fine except we found something strange in Historical Report "Agent State Summary". Agents are working in 8 hours shift but in the Total Logged-in Time in Agent State Summary report show up to 20 hours (Time spend in Not Ready state up to more than 10 hours). This is happened to some agents only.
We have checked with the agents and they confirmed that they have loggout properly after working shift (when they finish, they logout of CAD and then logout of Extension Mobility).
We have checked "Agent State Detail" report, and found strange behavior (for thoes agents that have abnormal Not Ready state and long duration of Total Logged-in Time) as - after that agent Logout, they have change to Not Ready state with reason code 32759 (The system issues this reason code if the agent's phone crashes and that agent is placed in the unavailable state).
What caused this to happen? Agent shouldn't have any state after they logout.
Any idea?
Thanks.

Aaron
Just one more thing. for example SLA on the CSQ is set to 10 secs
Call is offered to the agent via Resource commend but the agent does not answer so RONA (15sec) is invoked and the call is re-queue - Does this impact SLA?
No agents are available so the call is queued with IVR- Does this impact SLA ?
Basically I guess the SLA is impacted if the call is either ringing on an agents phone after the 10 Sec SLA but answered or returned to queue if the RONA is say 15 secs - either way the SLA is impacted is this correct?
Sorry for the "obvious " question but customer stated that she was informed the SLA is only impacted on "ringing" time on the agents phone and not if the call is queuing, listen to on hold while queuing

Incorrect total music duration reported in iTunes

I'm up to just under 40Gb of music in iTunes 7.0.2.16. Total music library duration, song count and storage size is reported at bottom of Music frame. Around the 29 to 30 days total mark, iTunes suddenly now reports a wildly incorrect value of around 128+ days. Is this a bug? If I filter the view with some string query, the total duration reported is correct, but for the full library it is WAAAY off.

Hi there,
I had the same problem as I was adding music to my library. I would use the internal CD drive to rip them to my hard drive. After looking at my collection, it was at 144 gb, but the playtime was 513 days!
I set up a smart playlist with the only parameter being to pick songs longer than 20 minutes. I found numberous occassions where an album woul be ripped incorectly and songs would have a value of over 738 hours.
I made notes of these, deleted them from the library and moved them to trash. The time went back to 77 days for my collection. Then, I re-ripped the albums in question and everything seems to be fine.
Now, as I amadding CDs I can watch the overall playtime and immediately know if there is a problem.
Hope this helps.
Chris

Report on Total Authorization Duration

Similar Messages

Maybe you are looking for