Report or table

Dear All,
Please let me know from which report or tables can i get the list of delivery order, delivery document number, billing document number and corresponding FI document number.
Regards,
Indranil

HI
In the table VBRP you can get the sales order number, delivery number the fields are
VBRP-AUBEL (Sales Order)
VBRP-VGBEL (Delivery)
VBRP-VBELN (Invoice
For Accounting doc you need to goto BKPF Table
regards
Prashanth

Similar Messages

Report In Table Format in Email

Dear sir,
i want to send mail to user in format of report of issues in table Format in Body of mail.
Actully i want to send mail daily to user with Pending Issues of user.
HOD allote issue to user with Close target Date .Mail would be fire till tagget date >sysdate .
There can be Multiple issue with user.
so i want to create a list of All pending issue in report in table which are not Closed .
Report should be display with that column
eg. User 0010 has 3 Pending Issue
Issue No-----subject-----Create On-----Target Date
001---------ABC-------27-Mar-2011-------30-Jnn-2011
002--------BHN-------23-Jun-2011---------06-July-2011
003--------JHN--------05-Jun-2011---------02-July-2011
That Report Should be sent to User in mail.
My Code is
DECLARE
l_id number;
to_add varchar2(1000);
to_sub_by varchar2(1000);
from_add varchar2(1000);
l_body varchar2(4000):=:P33_DESCRIPTION;
l_sub varchar2(1000):=:P33_SUBJECT;
I_case varchar2(10):=:P33_CASE_ID;
I_isue_dte date:=:P33_SUBMITTED_ON;
l_regd    varchar(100);
CURSOR C1 IS SELECT EMAIL_ID,(SELECT EMAIL_ID FROM USER_MAS WHERE USER_ID =:P33_SUBMITTED_BY_ID) AS D FROM USER_MAS WHERE USER_GR_ID=:P33_ASSIGNED_TO_GROUP_ID AND USER_ID NOT IN(:APP_USER);
BEGIN
if :P33_ASSIGNED_TO_GROUP_ID is not null then
open C1;
LOOP
FETCH C1 INTO to_add,to_sub_by;
EXIT WHEN C1%NOTFOUND;
select email_id,user_name into from_add,l_regd from user_mas where user_id=:app_user;
l_id:=APEX_MAIL.SEND(
        p_to        => to_add, -- change to your email address
        P_cc        => to_sub_by,
        p_from      => from_add,
        p_body      => 'Issue Information'||''||chr(13)||chr(10)||chr(13)||chr(10)||
                       'www.farhorizonindia.net:7777/crm'||''||chr(13)||
                       'Issue Title'||':'||l_sub||CHR(13)||chr(10)||
                       'Issue Number'||':'||I_case||CHR(13)||
                       'Issue Open Date'||':'||I_isue_dte||''||chr(13)||chr(10)||CHR(13)||chr(10)||
                       'Most Recent Comment'||':'||''||chr(13)||chr(10)||
                       l_body||chr(13)||chr(10)||''||CHR(13)||chr(10)||'Regards'||chr(13)||chr(10)||''||l_regd||CHR(13)||chr(10)||CHR(13)||chr(10)||'Please do not reply to this email.If you wish to update the call.please login to the issue Management.',
P_subj      => I_case ||' Issue '||l_sub);
end loop;
close C1;
end if;
COMMIT;
apex_mail.push_queue(
P_SMTP_HOSTNAME => '102.111.0.9',
P_SMTP_PORTNO => 25);
commit;
END;How can i create that format in Body Of sending Email.
Thanks
Vedant
Edited by: Vedant on Jun 30, 2011 3:44 AM
Edited by: Vedant on Jul 5, 2011 9:17 PM

Look at using an interactive reports and subscription routine..: http://st-curriculum.oracle.com/obe/db/apex/r40/apexirr/apexirrdev/apexirrdev_ll.htm
Death called while you were out, so I gave him your cell number.
Thank you,
Tony Miller
Webster, TX

Create a Cockpit (Transaction) for Reports and Tables

Hi Gurus,
i am very new in ABAP. I want to create a Transaction/view in SAP BW where i can put my favourite Abap reports and tables and execute These directly from the created view/Transaction without se16/se11 or se38 Access and dont know if this is possible and how to do it.
the reason herefore is that we get deprived in differently time ranges our authorizations for the Standard Transactions.
I have a list of my tables and programms.
Thanks for your help.

we get deprived in differently time ranges our authorizations for the Standard Transactions.
So you try to bypass security checks put in place by the Basis team
or could you explain your requirement ?
Remember (or learn) that creating such transaction, you are able to bypass following authorization checks using SU24 (Identity Management, User and Role Administration of Application Server ABAP, AS ABAP Authorization Concept, From the Programmed Authorization Check to a Role, Editing Authorization Default Data (Development System) / Editing Authorization Default Data (Customer System). )
Regard,
Raymond

Asigning Reports, specific tables and Url links to the Role

Hello Gurus,
could you please tell me the procedure of asigning Reports, specific tables and Url links in the role.actually i know the process of assigning T-Codes to the role but i dont know the procedure for reports and url links and tables...
i hope u people will respond positively.
Cheers.......
srinivas.korva

Hi Srinivas,
"i want to add only one particular table not all tables", you can do this using a Custom Transaction Code, the following are the steps to do it:
1) goto se93, give a unique name, say zxxx
2)Enter SE16 into the transaction field and select the flag the skip initial screen field:
3)On the lower portion of the screen, enter the following information:
Name of screen field: DATABROWSE-TABLENAME
Value: Enter the name of the table you want to browse with
4)save it.
5) Now add the transaction zxxx in th role, and assign it to the user.
With this, when user executes the transaction, he/she will be able to see only the perticular table you added.
"in PFCG what is the use of Exper mode for profile generation. what is the difference between general profile generation and expert mode profile generation".
Expert mode has 3 options:
1) Delete and recreate profile and authorizations---This will completely delete the old profile and add only the new once.
2) Edit old status----It will edit the old values
3) Read old status and merge with new data----This will add the new values aithout actually disturbing the old ones.
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh

HOW TO DECIDE IN A REPORT WHICH TABLE SHOULD LOOP FIRST?

MY Report contains 3 item table and one header table or 4 header tables then how to decide that this table should loop first.And how could i judge that this table contains duplicate entries.
HOW TO DECIDE IN A REPORT WHICH TABLE SHOULD LOOP FIRST?
Moderator message: please search for available information/documentation before asking, do not post in all upper case, these forums are not a substitute for ABAP training.
Edited by: Thomas Zloch on Dec 6, 2010 12:00 PM

Hi,
It is suggested to loop at the header table and then read the item table. Where in if you have multiple entries in the item table that matches, use the parallel cursors concept (Loop from index) as shown below
Loop at header....
Read table item with key......
If sy-subrc EQ 0.
Loop at item from sy-tabix.
-- Perform your processing.
endloop.
endif.
endloop.
Also make sure if you have duplicate entries in your internal tables, Use SORT and then DELETE ADJACENT DUPLICATES so that it avoids the performance issues as well
Hope this helps you.
Regards,
Shiva

Crystal Reports Temp tables - Driving Me crazy

Our ongoing saga with temp tables and crystal reports continues. I am ready to go crazy, so any help would be appreciated.
Notes:
I create the ##tempsmall table in query analyzer, so it is present when the code executes.
When I use the sa/Corinne credentials, it works.
When I use a non sa set of credentials, I get an error saying the temp table is not found.
When I add the non sa user to the tempdb as a user, with DBO permissions, It works.
Code is below
Dim Report As New ReportDocument()
Report.Load("C:\KI\Customers\Live Customers\Brookledge\ReportRD\CrystalReportsApplication1\Projects.rpt")
Dim LogInfo As New TableLogOnInfo
Dim Tbl As Table
For Each Tbl In Report.Database.Tables
LogInfo = Tbl.LogOnInfo
LogInfo.ConnectionInfo.ServerName = "ocamb-vista"
LogInfo.ConnectionInfo.DatabaseName = "mapps20"
' We need to figure out how to make this work with a non sa user?
LogInfo.ConnectionInfo.UserID = "medequipuser"
LogInfo.ConnectionInfo.Password = "mapps"
'LogInfo.ConnectionInfo.UserID = "sa"
'LogInfo.ConnectionInfo.Password = "corinne"
Tbl.ApplyLogOnInfo(LogInfo)
Next Tbl
Report.Database.Tables.Item(0).Location = "tempdb.dbo.##tempsmall"
Dim v As New Viewer
v.CrystalReportViewer1.ReportSource = Report
v.Show()

Hi Scott,
The problem is tempdb is only accessible by the Administrator account and they are typically not to be used by anyone other than the system. This is how SQL server works, any query being run will create a temp table for the DB server to use and pass that data to the calling query, once completed the tempdb is deleted.
As you have seen, unless you set permissions each time for a specific user you don't have access to it. One option is to use real tables that you can populate and delete the rows of data each time. Not very efficient though.
Crystal respects all DB permissions so it's not a CR issue.
One possibility is in your front end you could use MS SQL Server API's, if there are any, or use a stored procedure to set permissions to the temp table before calling CR to set location. Sorry no samples to do this, its a DB server question.
Another option is to write the data into a Data Set and then set the location to the DS for CR to use. If you have more than 5000 row though don't do this or your reports will have performance problems.
CR does not have any API's that will allow you to access a table that it does not have permissions to get to. Basic DB security, you'll get the same log on error trying to connect ot any table that user doens't have access to.
Thank you
Don

Last Used status for Reports, Transactions, Tables ??

Dear all,
Kindly let me know how to find the last used status for
Reports, Transactions, Tables ??
This is very urgent, Please do the needful.
Waiting for the responses..
Cheers,
Virendra.

Here the issue is same.
STAT transaction is asking for the time which is the main hurdle.
I am hanging around with STAT transaction but not finding
how to getover the time specification.
if i dont specify the time i takes by default the 2 or minutes back from the current time.
which is not useful for me at all.
My main requirement is that my seniors want to know what are all reports or transaction or tables which are not used at what last time ?
so if i have to specify the time wont be so useful for me.
And writing a report 'll not gain anything coz internal SAP report is take time as main parameter.
Regards,
Virendra.

IAS report infrastructure tables

All,
I am trying to find any information on where data would be stored in the report infrastructure tables on the IAS server. I want to be about to query these tables, similar to what the OEM web page has in a sense of displaying the failed/completed and running reports. Does anyone have any insight as to where these tables reside or if they are stored in something like xml files?
TIA
Brian

Brian,
I am looking for the same thing. If you have obtained the information you were looking for, would you please send it to me: [email protected]
Thanks so much!

Hello! Want to programatically alter the Report.Database.Tables info

Post Author: RobotSlave
CA Forum: .NET
Crystal Reports 2008 CFK0Y-KVURM2M-00UFAFF-N43MCrystal Reports 2008 for Visual StudioMicrosoft Visual Studio 2005Version 8.0.50727.762 (SP.050727-7600)Microsoft .NET FrameworkVersion 2.0.50727
Installed Edition: Enterprise
Microsoft Visual C# 2005 77718-007-4000003-41954Microsoft Visual C# 2005
why? to save time thats why, I have a zillion reports that I have to point at a new database periodically, (and I have some time on my hands here at the ranch) so I decided to automate the process. I made a windows application with Visual Studio that opens the rpt files as objects using the crystaldicisions object object model thingy, pulls out the table logoninfo.connectioninfo stuff and sets it to a new location THEN when I try to set the report.database.tables back to my new modified version it says that the tables property is a readonly thingy. I can open and save, but I cant modify the part I want to... how can I alter the serverName and databaseName properties such that I can save the result?
thank you!
much love.

Post Author: RobotSlave
CA Forum: .NET
I was making a new copy of the database.tables and then editing it then trying to set the whole reportdocument.database.tables = to my modified version, it was readonly so it didnt work. when I just iterate through the tables and set the properties on each one, it works just fine.

List of users with authorised reports and tables.

hi all
i have another requirement, that is List of users with authorised reports and tables in SAP.
that means user wise which reports and tables have authorisations to execute. for that what is the tcode or table name?. please help me in this..
Thank you.

Hi,
In SUIM tcode expand transactions node der ull have for users..........
Cheers,
jose.

Can you read Reports and Tables through RFCs and BAPIS?

Is there any way to read established reports and tables through RFC or BAPI function calls? We have a middleware that can execute various BAPIs and RFCs. I see a few promising ones: RFC_READ_REPORT, but no examples anywhere what the parameters needed are for the inputs.

Hello Scott,
Check below FMs for reading tables and programs.
Tables : RFC_READ_TABLE
Program : RFC_READ_DEVELOPMENT_OBJECT
Please note that for reading program using RFC_READ_DEVELOPMENT_OBJECT , lines in program should not exceed 72 chars else FM will throw dump(READ_REPORT_LINE_TOO_LONG).
Program code will appear in table QTAB which is 72 chars wide.

Dunning Letter as Crystal Report: What tables? (SAP B1 9.0)

Dear Experts,
I am being asked to revise the Dunning Letters for our clients. The existing PLDs for each Dunning Letter shows most data fields as system variables. The existing Crystal Report for Dunning Letter 1 is a conversion from the PLD and doesn't show table information for most of the report's main items. There are tables in the report but they are standard ones (OADM, OADP, OCRD, OHEM, OSLP). It also includes a "table" called "PLD__ITEMS" which has all the PLD system variables and no B1 table or field/column information.
As I'm just now starting to work with dunning letters, I see that I can't even run this report in Crystal. The PLD__Items datasource prompts me for a file path and class name. Any ideas what one enters here to run the report outside of B1 (from the Crystal report designer)?
The main focus of my question is: Has anyone created a Crystal Report to replicate the Dunning Letter and if so, what tables are involved and how are they connected? If I can create a Dunning Letter entirely in Crystal, I can replicate it across all clients and get the correct fields/columns of data the clients want. The inclusion of the PLD__Items apparently limits my ability to test the results. I would prefer to avoid the PLD limitations.
Thanks for any assistance.

Thank you Nagarajan. I have a dunning letter created in Crystal Reports for our client. It is fairly limited in scope, it just has the customer name and address, invoice numbers and dates, amounts due and the text they wanted in it.
I can import it into B1 9.0 and set it as the default for Dunning Letter #1 and it runs, but unlike other formats where there is a DocEntry and/or ObjectID and a ?DocKey@ or ?ObjectId@ parameter, how do I limit the report to just one customer? Typical document layouts run for the document that's on the screen. In the dunning process, the report runs once for every customer when the Dunning Letter Method is set to "One Letter per BP". I have to limit the report to one customer at a time. Right now, each dunning letter based on the Crystal report is identical and it contains all the data for every customer.
So, does anyone have any ideas for what selection criteria needs to be included in the Crystal report to have it select just one customer from the dunning wizard tables? Thanks.
Michael
Edit: I created a ?WizardID@ parameter and a ?CardCode@ parameter to limit the report to a single dunning wizard event and a single customer. While it works fine in Crystal itself, it doesn't work in B1 at all. I had thought that by limiting the report in this way, it would only create dunning letters for a single customer.

Report using table mseg

Well i m makin a report on material consumption which gets the opening stock, purchase, consumption & closing stock of all the materials in a particular month.
i m getting mblnr from mkpf table & then go to mseg table. but it is taking a lot of time. can i make it faster. how??

hi,
can u paste ur code here to know the exact pblm. if u r using read table statement then use binary search option with it.
is u r using select in loop then avoid it and use for all entries to amke it faster.
it would be nice if u paste ur code to know the pblm clearly.
check tips in the run time analysis.
hope this helps u.
reward points if helpful.

Report or table for the changed sales orders

Hi Friends,
Does anyone know of the standard report with which we can track all the sales orders where the changes have been made in particular date range?
If not standard report then atleast the table or the structure where the value is stored.
I know that we can track the orders one by one but I am looking for a list of orders.
Thanks in advance.
Regards
Karan

Hi,
Try CDHDR for header and CDPOS for items.
The only trick here is finding the object.
Reward points if useful
Regards,
Amrish Purohit

Bi publisher report, data table, column label displays last character

Hello all,
I have created various reports on BI Publisher (win2008 R2 64bit 11g (.1.1.5) version). After altering some access rights, all the reports that include data tables display only the last character of the column label. All the column data is reported correctly.
example:
- TotalNumber -
4234
234
4
became
- r -
4234
234
4
Any ideas about what is going on???
Thank you

Thanks for the suggestion Simon.
I just created a view based on the 46-column SELECT statement from dual above and then set "SELECT * FROM myview" as the Source Query.
Unfortunately I get exactly the same error.
Thanks,
Andy

Report or table

Similar Messages

Maybe you are looking for