Report painter: Cost Centers: Absorption costing  - functioanl area

Hello guys,
i need to add under report 1VK the report which would show me in columns functional area taken from master data of cost centers plus the actuals for each period and the last with finak amount for the whole year
in rows we have cost centers and thier cost elements
at the moment we have existing the periods with actual and rows with cost centes and copst elements, the only requriemenents is to add the fucntional area from master data
Can you please let me know which parameters should be used, how should be entered and if this is possible to have in same reports columns with functional area from master data and separate periods with actuals
thanks in advance, higly appreciated
regards
Hana

Hello all,
is it possible AT ALL to add the Functional area from master data to  library report 1VK ? the report at teh moment contains costs on cost centers for periods 1-12 and its total
but either way - adding teh functional are to columns ( does nto work, not posible to execute ther eport due to error ) adding into rows - no results in report
I am strugling with this so eitehr help is appreciated
thanks
Hana

Similar Messages

  • Copy a group of cost centers from one controlling area to another

    Hello,
    is it possible to copy a group of cost centers from one controlling area to another?
    Or a group of internal orders?
    Thanks
    Jasmina

    No. If you used any upload tools like LSMW, perhaps you may use that for uploading the second controlling area.

  • Report Painter: P&L on Cost Center Group,BA(WBS/Internal Order) wise

    Dear Experts, i require to create a report in report painter.
    The requirement is to display P&L account on cost center group wise; if cost center is not mentioned and WBS/internal order is mentioned it should be shown under the respective Business Area and if non of the above is mentioned it should be shown in a separate column (General). The total of each GL should match the trial balance amount.
    Please Guide Me.

    Hi,
    Its little bit complex to accommodate in report painter to in 1page.
    Coz. Cost Center information will get in different library in GRR1
    1AB Cost Centers: Variance Analysis FICTM 07.02.2013 CCSS 
    6O2 Internal Orders SAP 24.03.2000 RWCOOM
    better you can develop with ABAP report.
    Regd,
    Khan.

  • Report painter/writer for actual cost component split

    Hello Gurus,
    Any of you guys ever explored possibility of creating a report using report painter or writer that can give both Standard and Actual cost component splits in one report? Is it even possible without custom ABAP involvement?
    Thanks
    RG

    Hi Raghu,
    After your reply, I am getting a doubt..
    Have you Activated Material Ledger? When you say Actual Cost Component Split, are you talking about it what you get in Actual Costing/Material Ledger?
    If yes, then you can map your cost compnents for Actual Costing in the path SPROControllingProfitability AnalysisMaster Data Valuation--Setup Valuation using Material Cost Estimate -- Define Access to Actual Costing / Material Ledger
    Further, there are no standard reports available in COPA. Try to build a report comprising two columns, 1st column with the value fields which are mapped for Standard Cost Components and 2nd column with the Value Fields which you have assined for Actual Costing under the above path.
    You will be able to get the comparison...
    Pls don't hesitate to call me for further assistance....
    Srikanth Munnaluri

  • Report Painter- How to make cost center report for Jun07-Jul08 ?

    Hi Experts,
    I need to make a P&L (Actual/ Plan) report for Jun 07 - Jul 08 by using Report Painter, but I'm having difficulty to make column for the next year period (2008) and some other things.
    We are using K4 Fiscal Year Variant in ECC 6.0.
    The layout is somehow like this:
    Header : Cost Center
                 Actual/Plan Report
                 June 2007 to July 2008
    Body:
    Cost Element     |   Total Actual   |   Total Plan |  Actual  June | Plan June .................Actual July | Plan July    
    xxxx       
    xxxx
    Account Group (total)
    xxxx
    xxxx
    Account Group (total)
    Grand Total  
    How to:
    a. make the header "June 2007 to July 2008" ?
    b. make the selection screen to provide parameter for June 2007 to July 2008? (e.g.: period 6 fiscal year 2007 to period 7 fiscal year 2008)
    c. provide layout (rows and columns) as described above? it should provide detail cost elements and also calculate it as the total per account group, then finally the Grand Total for all of account groups. 
    Thank you before,
    -=Meila.S=-

    Hi,
    1. Put Year and Month as your General Selection parameters
    2. In the label of the fields, if you put the parameter name with & before, it will display the value
    3. If you put cost element in General selection, it will come with a group, and when you selecting the group, the report does the sub-totals automatically.
    Regards,
    Eli

  • Report Painter/Writer Ctr & WBS costs

    I think I've tried every possible variation to bring the appropriate CTR/WBS costs. Here's what I'm trying to do:
    1. See in one reprt both the CTR planned costs and the WBS planned costs where the cost center is assigned to the WBS as a responsible CTR.
    2. Added the characteristic "Import CTR Data" into either a row or general data selection as well as adding object types WBS, ACT, PRJ, and CTR.
    3. I can get the WBS to display as a line item with the planned costs, but when I do it changes the credit balance on the CTR to a positive value. This is after I run plan reconciliation for the CTR, and I have integrated planning turned on.
    Example:
    Postings:
    WBS Labor CE: $100
    CTR Labor CE: -$300
    Report:
    Total CTR LAbor balalnce $100
    WBS displayed with $100.
    When I remove the WBS and Import CTR Data i get the $-300 balance on the CTR. So I'm guessing it's not possible to bring these two objects into the same report to show the CTR over/inder absorption with WBS visibility.
    Any suggestions would be appreciated.
    Jim

    Cost center...that's the abbrev. used in report painter. As an update the problem seems to stem from the fact that I've added the WBS charateristic to the line and exploded it. when I do this I lose the credits to the cost center. Any idea?

  • Report Painter GRR1 table CCSS cost centers actual/bud by period wise

    Hi,
    I have developed Cost Center Actual/Budget Report by period for 12 months (Jan to Dec in columns) in each columan I have hardcoded period e.g. for Jan (01) Feb (02) till Dec (12-12) for one of coulmns given as variable From Period to To Period as vairbale to choose user in selection criteria (1PERIV-1PERIB). while executivng the report system is givng results for whole (12)periods in the output, even my selection criteria from period 1 to 3.
    Please advise any body how can I restrict by period wise.. e.g. if I select from period 1-3 it should show for only 3perios.
    Thanks in advance!!
    VS Rao

    Hi Kumar,
    I have done below steps to my CC Report to show by period wise(individual columns Jan, Feb, so..on) cost center report:
    Step 1: used Library 1VK, Table CCSS in GRR1.
    Step 2: Created 12 individuals columns starting from Jan to Dec..
    Step 3: Created 12 formula variables(internal Variables) for 12 periods..(becoz if I hardcoded system is deriving all the  
                 periods)..
               a) created Internal value Variable ZVAR(defaualt 01),ZAR1(default 02),ZAR2 (default 03)...this is for to create fomula
                   variables.
               b) for period 1(jan) formula variable  "IF '&ZVAR'>= 1 THEN 1 ELSE 017" internal variable table:CCSS,field:PERBL
               c) for period 2(feb) IF '&ZVA1'>= 2 THEN 2 ELSE 017 like wise created 12 variables for 12 periods
    Step 4: above the formula variables I have selected check box as variable but not coming on selection screen, I need in
                selection screen from period to period for this I have created one more hide column and given period vairable "1PERIK"
               now its coming on the selection screen but values are not populating based on by selection criteria..
    Note: If I slect 1-4 periods it should show for only Jan,Feb, Mar & April  and individually..
    Please sugget above my formula is correct or not!!  appreciate your valuable suggesion!
    Thanks
    VS Rao

  • Adding additional field for selection criertoria for report painter

    I am trying to add a new selection criterion for a report which is created from report painter. I have run Transaction Code GRR2 and selected the library 1VK which is cost centers: absorption costing and doubled clicked on the report.
    Clicked on edit on the header à General data selection à I am looking for a option for company code but I cant find it in the list. Is there anywhere I need to flag the field company code as characteristic value or am I missing something??
    Thanks
    E

    hi,
    You might want to try add parameters in general data selection.... in addition you can add variable against this field so that it appears on selection-screen. You can look at standard SAP report for example.
    hope this helps.
    Cheers,
    Gimmo

  • Production costs full absorption

    Hi,
    I have few service cost centers and production cost centers.
    At the month end we are allocation service cost centers expenses to production cost centers using various statistical key figures.
    At the month end we want to absorb full cost in production cost centers.
    for that we are first KSII transaction code.
    Still we find some amount in cost center as under absorption with minus value.
    how can we absorb full value?
    We have not activated splitting in OKTZ?
    Please guide me
    Sateesh

    Hi,
    Any suggestions?
    Srinivas

  • Stand.hierarchy in cost centers

    Hi
    is it mandatory to create standard hierarchy for cost centers... what is the purpose of standard hierarchy.
    thanks in adv

    Hello Aparna,
    A tree structure containing all the cost centers in a controlling area from the Controlling standpoint.
    You assign a cost center to an end node of the standard hierarchy in the master data maintenance of the cost center, or in the enterprise organization. This ensures that the standard hierarchy contains all the cost centers in that controlling area.
    When you define the controlling area, you specify the name of the top node of the standard hierarchy in that controlling area.
    Hope this helps. please assign points.
    Rgds
    Manish

  • Trip approval workflow on different cost centers.

    Hi Experts,
    I have a business case that trip shall be approved by Cost Center HOD's (Cost center Owner).
    For Example:
    Case 1: if an employee is going on business trip and charging is on his master cost center. Then his approval shall be done by his HOD or Cost center HOD (Stnd Solution)
    Case 2: If an employee is going on business trip other than his master cost center, then approval shall be required from his Cost center owner (HOD).
    Case 3: if employee is going on such trip where his charging shall be charged on Different Cost Centers (Master Cost Center + other cost center's) . Firstly approval shall be made his Master Cost Center (if available) then approval shall be required for all cost center in-charges.
    Assume that there is one to one relationship between cost center and Org unit.
    Please suggest some solutions for case 2,3
    Thank you in advance!

    Hi Muhammad,
    As suggested by Thomas, you can use Rules to determine the agent who should get the workitem for approval.
    Within the rule you could embed a FM wherein you could write your logic to determine the appropriate approver based on the trip data and the cost center of the user creating the trip.
    Hope this helps!
    Regards,
    Saumya

  • Trip approval on different cost centers.

    Hi Experts,
    I have a business case that trip shall be approved by Cost Center HOD's (Cost center Owner).
    For Example:
    Case 1: if an employee is going on business trip and charging is on his master cost center. Then his approval shall be done by his HOD or  Cost center HOD (Stnd Solution)
    Case 2: If an employee is going on business trip other than his master cost center, then approval shall be required from his Cost center owner (HOD).
    Case 3: if employee is going on such trip where his charging shall be charged on Different Cost Centers (Master Cost Center + other cost center's) . Firstly approval shall be made his Master Cost Center (if available) then approval shall be required for all cost center in-charges.
    Assume that there is one to one relationship between cost  center and Org unit.
    Please suggest some solutions for case 2,3
    Thank you in advance!
    Edited by: Muhammad Umer on Jan 12, 2011 8:59 AM

    Hi,
    you can try to create function module that could be used as a method in workflow.
    create function module that achieve your requirement.
    again, you can ask your abaper to help u to create function module.
    hope it helps.
    or you can post on SAP business workflow forum.
    Edited by: nzworld on Jan 12, 2011 10:35 AM

  • Report Painter - Dynamic Columns

    Dear Expert,
    I'm preparing a report painter report with cost centers as columns.
    Is there anyway I can use cost center group as variable and then the no. of columns and column texts are populated based on the no. of cost centers and cost center names exist in that cost center group?
    Thanks in advance and regards,
    Junior

    Hi
    To define anything as variable, you should have the details like - TABLE / STRUCTURE details.
    But, for any groups ( Cost element group / Cost center group) - no table / structure available
    VVR

  • Cost center and cost element in different collumns

    Dear all,
    I developed a report painter where the lead collumn has cost element and cost center. When I run the report it shows at the same collumn the cost centers and in a different line the cost element totalizing the amount of each cost center. So the report shows for each cost element the cost centers posted with this cost element. The report show like below:
    |-------
    Cost center A    | 100
    Coste center B  | 200
    |-------
    Cost element xxx - 300
    The problem is: How can I make the Cost element in a separate column ? Ex:
    Cost element xxx  |  Cost center A  | 100
    Cost element xxx  |  Cost center B  | 200
    Cost element xxx - 300 (In fact I don''t need the total)
    I need cost element and cost centers in different collumns to allow export it for other application..
    Regards

    Hi
    In report painter report we have only one lead column so we cannot have cost centers and cost elements in two different columns.Instead we can use the functionality of variation.Give the cost center in general data selection screen and select the variation functionality.So that cost centers are displayed on the left side of the report as hirearchy and only cost elements are only displayed in lead column.
    Thanks
    Sandesh

  • Report painter transportation from 4.6b to ecc6

    Dear Report painter expert
    We have two deferent servers one is 4.6 b and another one is ecc 6.0. In 4.6 b they are created 130 reports by using report painter. Now they are doing Migration to 4.6 b to ecc6 and globalization (clubbing all the servers into one server).
    My query is it possible to transport all the 130 report from 4.6 b version to ecc6.0 or else we have create the all the report manually.
    Regards,
    Venkataswamy

    Hi
    Read the SAP help which talks about "Dependant objects" tick.. It says dependant objects except Cost Center and Cost ele groups are transferred..
    Does the Set 0102DBAGXE_INVEST  pertains to Cost centers or cost elements
    If yes, Go to GS03, and Menu UTILITIES > Export .. Export it in a flat file and import it in ECC 6.0 before importing the reports
    Regards
    Ajay M
    SAP HELP TEXT ENCLOSED BELOW
    Indicator: Export/import all dependent objects
    If you set this indicator, all dependent objects in addition to the desired objects are exported or imported.
    Example
    If you export or import a report group and the indicator is set, all reports in the report group, all sets (or set hierarchies) contained in the reports, the set and value variables as well as the library will also be exported or imported.
    Exception
    Groups from CO (such as cost center groups, cost element groups) are not transported as dependent objects. If you want to transport groups from CO, this must be done explicitly.
    Does the

Maybe you are looking for