Report - Remove 0's

Hi,
In My Report, I am facing a problem regarding leading 0's...means in LFA1 table, i can find vendor no. easily like 10120 but in WITH_ITEM table, when i m inserting vendor no. like 10120, it not shows the data...but when i inserting vendor no. "0000010120", it shows the values.
From this, my report not showing the vendor data..
Plz tell me how can i remove this issue..
Any code there or any other thing is required..
Thanks...

Hi,
Use this Fm :  'CONVERSION_EXIT_ALPHA_INPUT'.That will solve ur issue.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
   EXPORTING
     INPUT         = VENDOR NO 
  IMPORTING
    OUTPUT        = VENDOR NO 
Hope it is helps.
Regards,
T.D.M.

Similar Messages

  • ALV report - remove of decimal values

    Hi experts,
    In my ALV report, output table having decimal values, ex:90000.50, i want to display only 90000,
    can help any one inthis.
    Thanks in advance.
    Regards
    Rams

    Hi,
    for that particular field in Field catalog..
    <ur field cat>-decimals_out = 0.
    see this sample code.
    type-pools: slis.
    DATA: begin of itab6 occurs 0,
    chk type c,
    a type p decimals 2,
    b type p decimals 2,
    c type c,
    end of itab6.
    data: ls_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
    wa_layout TYPE slis_layout_alv.
    itab6-a = '1.12'.
    itab6-b = '2.25'.
    itab6-c = '+'.
    append itab6.
    append itab6.
    append itab6.
    append itab6.
    ls_fieldcat-fieldname = 'A'.
    ls_fieldcat-seltext_m = 'A'.
    append ls_fieldcat.
    ls_fieldcat-fieldname = 'B'.
    ls_fieldcat-seltext_m = 'B'.
    ls_fieldcat-decimals_out = 0.  "this ll do
    append ls_fieldcat.
    ls_fieldcat-fieldname = 'C'.
    ls_fieldcat-seltext_m = 'C'.
    append ls_fieldcat.
    wa_layout-box_tabname = 'ITAB6'.
    wa_layout-box_fieldname = 'CHK'.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    i_callback_program = sy-repid
    it_fieldcat = ls_fieldcat[]
    IS_LAYOUT = wa_layout
    TABLES
    t_outtab = itab6[].
    Cheers,
    jose.

  • Is there any way to retrieve reports removed by the PRCSYSPURGE

    Hi everyone. I am trying to retrieve the last month reports but by default in process scheduler system settings the retention days is set to 7 days it was automatically purge the all process run types. Can any one know how to retrieve the those reports.
    Thanks in advance.
    Thanks & Regards,
    Siva Prasad B

    You could possibly try looking in the Report Repository. If you are not sure where that path is, you can look at the Report Node Definition to find out. PeopleTools > Process Scheduler > Report Nodes. For me, it is in the "Network Path" at the bottom of the screen. Another location you can look is in the Web Profile -- PeopleTools > Web Profile > Web Profile Configuration. Again, at the bottom of the screen, you should see "Report Repository Path".
    In the Repository Path, you would see one folder for each environment. Go into your environment's folder. Then, you should see a folder for each date. I haven't changed the default 7 day rule, and I still have folders from back in 2010, so you might be able to still get the reports. I am not sure.
    You wouldn't be able to open these from online (like in Process Monitor), but if something hasn't deleted the report file from the repository directory, you should still be able to view the reports.
    Hope that helps.

  • I want to get avl report, removed by moderator

    Design selection screen as follows.
    Input:
    Company Code _____________
    Bank Name _____________
    Branch  _____________
    Date from ___________ to ______________
    Vendors _____________to _______________            
    Output:
    ALV Heading -
    Company code with address
                      Bank name
                      Branch
    ALV BODY-----
         Checkbox ,   Vendor Type  , Vendor number , Vendor Name & address , Tax Type (AIT or VAT) , Amount
    Edited by: Jan Stallkamp on Jul 21, 2008 4:42 PM

    report zex.
    type-pools: slis.
    types: begin of tp_data,
    bukrs like t001-bukrs,
    hbkid like t012-hbkid,
           end of tp_data,
           tp_tbl_data type standard table of tp_data.
    Constants
    Data objects (variable declarations and definitions)
    Report data to be shown.
    data: it_data type standard table of tp_data.
    Heading of the report.
    data: t_heading type slis_t_listheader.
    ======================= Selection Screen ==========================
    selection-screen: begin of block b1 with frame title text-t01.
    DATA: w_aux_bukrs like t001-bukrs.
    SELECT-OPTIONS s_bukrs for w_aux_bukrs .
    DATA: w_aux_hbkid like t012-hbkid.
    SELECT-OPTIONS s_hbkid for w_aux_hbkid .
    selection-screen: end of block b1.
    ======================== Event Blocks =============================
    at selection-screen.
    start-of-selection.
      perform get_data using it_data.
    end-of-selection.
      perform build_alv using it_data t_heading.
    ======================== Subroutines ==============================
    *&      Form  get_data
          Gets the information to be shown in the report.
    form get_data using t_data type tp_tbl_data.
    *SELECT t001~bukrs
    *lfa1~hbkid
    *INTO CORRESPONDING FIELDS OF TABLE t_data
    *FROM t001 as t001
    *inner join t012 as lfa1 on bkpf
    *WHERE t001~bukrs in s_bukrs
    AND lfa1~hbkid in s_hbkid.
    endform.                    " get_data
    *&      Form  build_alv
          Builds and display the ALV Grid.
    form build_alv using t_data type tp_tbl_data
                         t_heading  type slis_t_listheader.
    ALV required data objects.
    data: w_title   type lvc_title,
          w_repid   type syrepid,
          w_comm    type slis_formname,
          w_status  type slis_formname,
          x_layout  type slis_layout_alv,
          t_event    type slis_t_event,
          t_fieldcat type slis_t_fieldcat_alv,
          t_sort     type slis_t_sortinfo_alv.
    refresh t_fieldcat.
    refresh t_event.
    refresh t_sort.
    clear x_layout.
    clear w_title.
    Field Catalog
      perform set_fieldcat2 using:
    1 'BUKRS' 'BUKRS' 'T001' space space  space  space  space  space space space space 'X' space space t_fieldcat ,
    2 'HBKID' 'HBKID' 'T012' space space  space  space  space  space space space space 'X' space space t_fieldcat .
    Layout
    x_layout-zebra = 'X'.
    Top of page heading
      perform set_top_page_heading using t_heading t_event.
    Events
      perform set_events using t_event.
    GUI Status
      w_status = ''.
      w_repid = sy-repid.
    Title
    w_title = <<If you want to set a title for
                the ALV, please, uncomment and edit this line>>.
    User commands
      w_comm   = 'USER_COMMAND'.
    Order
    Example
    PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
    Displays the ALV grid
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program       = w_repid
          it_fieldcat              = t_fieldcat
          is_layout                = x_layout
          it_sort                  = t_sort
          i_callback_pf_status_set = w_status
          i_callback_user_command  = w_comm
          i_save                   = 'X'
          it_events                = t_event
          i_grid_title             = w_title
        tables
          t_outtab                 = t_data
        exceptions
          program_error            = 1
          others                   = 2.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    endform.                    " build_alv.
    *&      Form  set_top_page_heading
          Creates the report headings.
    form set_top_page_heading using t_heading type slis_t_listheader
                                    t_events  type slis_t_event.
    data: x_heading type slis_listheader,
          x_event   type line of slis_t_event.
    Report title
      clear t_heading[].
      clear x_heading.
      x_heading-typ = 'H'.
      x_heading-info = ''(001).
      append x_heading to t_heading.
    Program name
      clear x_heading.
      x_heading-typ = 'S'.
      x_heading-key = 'Program: '.
      x_heading-info = sy-repid.
      append x_heading to t_heading.
    User who is running the report
      clear x_heading.
      x_heading-typ = 'S'.
      x_heading-key = 'User: '.
      x_heading-info = sy-uname.
      append x_heading to t_heading.
    Date of execution
      clear x_heading.
      x_heading-typ = 'S'.
      x_heading-key = 'Date: '.
      write sy-datum to x_heading-info.
      append x_heading to t_heading.
    Time of execution
      clear x_heading.
      x_heading-typ = 'S'.
      x_heading-key = 'Time: '.
      write sy-uzeit to x_heading-info.
      append x_heading to t_heading.
    Top of page event
      x_event-name = slis_ev_top_of_page.
      x_event-form = 'TOP_OF_PAGE'.
      append x_event to t_events.
    endform.
    *&      Form  set_events
          Sets the events for ALV.
          The TOP_OF_PAGE event is alredy being registered in
          the set_top_page_heading subroutine.
    form set_events using t_events type slis_t_event.
    data: x_event   type line of slis_t_event.
    Example
    clear x_event.
    x_event-name = .
    x_event-form = .
    append x_event to t_event.
    endform.
    *&      Form  set_order
          Adds an entry to the order table.
    FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
                         t_sort TYPE slis_t_sortinfo_alv.
      DATA: x_sort TYPE slis_sortinfo_alv.
      CLEAR x_sort.
      x_sort-fieldname = p_fieldname.
      x_sort-tabname   = p_tabname.
      x_sort-up = p_up.
      x_sort-down = p_down.
      x_sort-subtot = p_subtot.
      APPEND x_sort TO t_sort.
    ENDFORM.                    "set_order
    *&      Form  set_fieldcat2
          Adds an entry to the field catalog.
       p_colpos: Column position.
       p_fieldname: Field of internal table which is being described by
    *            this record of the field catalog.
       p_ref_fieldname: (Optional) Table field / data element which
    *                describes the properties of the field.
    *                If this field is not given, it is copied from
    *                the fieldname.
       p_ref_tabname: (Optional) Table which holds the field referenced
    *              by <<p_ref_fieldname>>.
                      If this is not given, the parameter
                      <<p_ref_fieldname>> references a data element.
       p_outputlen: (Optional) Column width.
       p_noout: (Optional) If set to 'X', states that the field is not
    *           showed initially. If so, the field has to be
                included in the report at runtime using the display
                options.
       p_seltext_m: (Optional) Medium label to be used as column header.
       p_seltext_l: (Optional) Long label to be used as column header.
       p_seltext_s: (Optional) Small label to be used as column header.
       p_reptext_ddic: (Optional) Extra small (heading) label to be
    *                used as column header.
       p_ddictxt: (Optional) Set to 'L', 'M', 'S' or 'R' to select
                  whether to use SELTEXT_L, SELTEXT_M, SELTEXT_S,
                  or REPTEXT_DDIC as text for column header.
       p_hotspot: (Optional) If set to 'X', this field will be used
    *             as a hotspot area for cursor, alolowing the user
    *          to click on the field.
       p_showasicon: (Optional) If set to 'X', this field will be shown
                     as an icon and the contents of the field will set
    *             which icon to show.
       p_checkbox: (Optional) If set to 'X', this field will be shown
                   as a checkbox.
       p_edit: (Optional) If set to 'X', this field will be editable.
       p_dosum: (Optional) If set to 'X', this field will be summed
                (aggregation function) according to the grouping set
                by the order functions.
       t_fieldcat: Table which contains the whole fieldcat.
    FORM set_fieldcat2 USING
          p_colpos p_fieldname p_ref_fieldname p_ref_tabname
          p_outputlen p_noout
          p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
          p_hotspot p_showasicon p_checkbox p_edit
          p_dosum
          t_fieldcat TYPE slis_t_fieldcat_alv.
      DATA: wa_fieldcat TYPE slis_fieldcat_alv.
      CLEAR wa_fieldcat.
    General settings
      wa_fieldcat-fieldname = p_fieldname.
      wa_fieldcat-col_pos = p_colpos.
      wa_fieldcat-no_out = p_noout.
      wa_fieldcat-hotspot = p_hotspot.
      wa_fieldcat-checkbox = p_checkbox.
      wa_fieldcat-icon = p_showasicon.
      wa_fieldcat-do_sum = p_dosum.
    Set reference fieldname, tablenam and rollname.
    If p_ref_tabname is not given, the ref_fieldname given
       is a data element.
    If p_ref_tabname is given, the ref_fieldname given is a
       field of a table.
    In case ref_fieldname is not given,
       it is copied from the fieldname.
      IF p_ref_tabname IS INITIAL.
        wa_fieldcat-rollname =   p_ref_fieldname.
      ELSE.
        wa_fieldcat-ref_tabname = p_ref_tabname.
        IF p_ref_fieldname EQ space.
          wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
        ELSE.
          wa_fieldcat-ref_fieldname =   p_ref_fieldname.
        ENDIF.
      ENDIF.
    Set output length.
      IF NOT p_outputlen IS INITIAL.
        wa_fieldcat-outputlen = p_outputlen.
      ENDIF.
    Set text headers.
      IF NOT p_seltext_m IS INITIAL.
        wa_fieldcat-seltext_m = p_seltext_m.
      ENDIF.
      IF NOT p_seltext_l IS INITIAL.
        wa_fieldcat-seltext_l = p_seltext_l.
      ENDIF.
      IF NOT p_seltext_s IS INITIAL.
        wa_fieldcat-seltext_s = p_seltext_s.
      ENDIF.
      IF NOT p_reptext_ddic IS INITIAL.
        wa_fieldcat-reptext_ddic = p_reptext_ddic.
      ENDIF.
      IF NOT p_ddictxt IS INITIAL.
        wa_fieldcat-ddictxt = p_ddictxt.
      ENDIF.
    Set as editable or not.
      IF NOT p_edit IS INITIAL.
        wa_fieldcat-input     = 'X'.
        wa_fieldcat-edit     = 'X'.
      ENDIF.
      APPEND wa_fieldcat TO t_fieldcat.
    ENDFORM.                   "set_fieldcat2
    ======================== Subroutines called by ALV ================
    *&      Form  top_of_page
          Called on top_of_page ALV event.
          Prints the heading.
    form top_of_page.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
        exporting
        i_logo             = <<If you want to set a logo, please,
                             uncomment and edit this line>>
          it_list_commentary = t_heading.
    endform.                    " alv_top_of_page
    *&      Form  user_command
          Called on user_command ALV event.
          Executes custom commands.
    form user_command using r_ucomm     like sy-ucomm
                            rs_selfield type slis_selfield.
    Example Code
    Executes a command considering the sy-ucomm.
    CASE r_ucomm.
       WHEN '&IC1'.
         Set your "double click action" response here.
         Example code: Create and display a status message.
         DATA: w_msg TYPE string,
               w_row(4) TYPE n.
         w_row = rs_selfield-tabindex.
         CONCATENATE 'You have clicked row' w_row
                     'field' rs_selfield-fieldname
                     'with value' rs_selfield-value
                     INTO w_msg SEPARATED BY space.
         MESSAGE w_msg TYPE 'S'.
    ENDCASE.
    End of example code.
    endform.                    "user_command

  • Security in FR Reports removed when re-importing

    We needed to make some changed to all FR Reports (100+) so in Workspaces Explorer we chose to:
    1) Export the entire FR folder(including subfolders) by clicking File\Export
    2) Make the changes (updated the Related Content link) to the *.des files
    3) Import thru workspace by clicking File\Import
    However, when we do this the original Reports will be overwritten, but then we loose the Security we assigned on the Reports. Where can we export the Security assigned on the Reports AND Folders for FR so that we do not have to reassign security?
    Appreciate the assistance!
    Robert

    If you are on version 9.3.1 there isn't a way. And we had the same heartburn. And in some instances the apply permissions to children didn't always work. this feature is very flaky
    JTS

  • Interactive reports - Removing search field from html export

    Hi,
    I have an IR with "download formats" HTML enable , set within Report atributes.
    I disabled search bar (also search field).
    I have a button with request=HTMLD .
    The html file saved is ok , except that it contain a search field.
    How to generate the html export , without this "search field".
    Thanks.

    Hi, Andre.
    Thank you for your advice.
    I do, however, respectfully disagree.
    Think about this from the end users' point of view. Most end users expect ANY criteria (lwhether it be a quick search filter or an explicit filter) to check all columns in a report, not just those displayed. If the user receives a "no data found" message after invoking a quick search filter, what should they do: begin adding each of the hidden columns one at a time to see if the "no data found" message goes away? That would get very frustrating. And I believe it would be equally frustrating if users got inconsistent results based on the type of filter applied. Using an explicit filter searches all report columns while a quick search filter only checks displayed columns-- confusing for end users.
    This has been my experience and see these reactions from end users.
    In any case, that's my two cents on it.
    Again, thank you for your help. It is appreciated.
    Elie

  • How do I report / remove comments?

    I've had my comments removed but I don't see how to remove other people's comments that are irrelevant to the question I post.

    You can't. Only the Hosts (Moderators) can remove posts, and they do this when a post has breached the Terms of Use - for example by ranting rather than asking a question, trying to discuss or speculate about Apple's future policy, or plain rudeness. When a post is removed for this reason the perpetrator is advised by email.
    However your may have had posts removed because they were a response to a post which has been removed, and so would have no function - you wouldn't be notified in that case.
    Decisions on what to remove are entirely up to the Hosts, though posters at Level 2 and above can draw the Hosts' attention to anything which seems dubious.
    If you have a serious reason for wanting a post removed - personal abuse, for example - then post the details here and someone will probably alert the Hosts to it. However simple irrelevance isn't likely to get a post removed.

  • Remove Header and Footer from a report

    Hi,
    I use the report S_ALR_87012104. But I want to export this report removing the header and footer. Is it possible to export the report excluding header and footer. That is line items only.
    Regards
    Mahbub

    Hi,
    It is possbile but not suggested to change a standard SAP report. but you may change it via abaper.

  • Remove Delete Query Report

    Our customer created a query.  The customer then created a report using the "Create Report" function under the Query Manager function in SAP B1.  Now they want to delete the query and also delete the report from the list.
    How is a report removed from that list???
    Thanks ahead of time for your information...
    Zal

    Tools->Queries->Query Print Layout, double click on raport to delete. After opened editor, choose Print Layout Designer->Delete Layout, thats all

  • Report of Pending invoices

    Hi Friends
    Can you please tell me how to get a report of pending invoices for which GR s were done (also for partially done GR s).
    This should be based on Purchase Org, Purch. group, vendor wise.
    Standard reports MB5S and ME2N will not provide all the details.
    The report should include the following:
    Purch. Grooup
    Vendor     
    Vendor Name            
    Purch.Doc.   
    Item     
    Mat. Document Number       
    DC Number                  
    DC Date                     
    mat Doc. Qty.     
    OUn                     
    GR value     
    Quantit y invoiced       
    Invoice amount LC     
    Crcy
    Early reply is appreciated, as it is very urgent
    Regards
    Manthini

    Hi
    Yes. Standard reports will not give you inputs.
    It's not easy to link material documents with invoice either.
    If you are using GR based invoice verification, then fine.
    Did you check MR11 ? However, you have to be careful not to do any postings here.
    This will have PO, material document etc. But DC no--no;
    Copy this report, remove posting related code and add code to get DC no etc from MKPF for the given material document.
    Best regards
    Ramki

  • Performance Issue Crystal Report and Oracle

    Hello,
    We have one procedure that takes 3 input parameters and returns Cursor from Procedure that is used to design the report. There is no caluculation involved here and cursor is opended dynamically. We are using Oracle Native connection.
    When we click on preview button it takes lots of time ( >10 Mins) to show complete data. While we call the same procedure in application and generate HTML report using Cursor returned it is done in < 15 Seconds. Can some point me where to look into to improve the performance of Crystal Report.
    DB: Oracle 10G
    CR: Version XI

    Hi Vadiraja
    The performance of a report is related to:
    External factors:
    1. The amount of time the database server takes to process the SQL query.
    ( Crystal Reports send the SQL query to the database, the database process it, and returns the data set to Crystal Reports. )
    2. Network traffics.
    3. Local computer processor speed.
    ( When Crystal Reports receives the data set, it generates a temp file to further filter the data when necessary, as well as to group, sort, process formulas, ... )
    4. The number of record returned
    ( If a sql query returns a large number of records, it will take longer to format and display than if was returning a smaller data set.)
    Report design:
    1. Where is the Record Selection evaluated.
    Ensure your Record Selection Formula can be translated in SQL, so the data can be filter down on the server, otherwise the filtering will be done in a temp file on the local machine which will be much slower.
    They have many functions that cannot be translated in SQL because they may not have a standard SQL for it.
    For example, control structure like IF THEN ELSE cannot be translated into SQL. It will always be evaluated in Crystal Reports. But if you use an IF THEN ELSE on a parameter, it will convert the result of the condition to SQL, but as soon as uses database fileds in the conditions it will not be translated in SQL.
    2. How many subreports the report contains and in section section they are located.
    Minimise the number of subreports used, or avoid using subreports if possible because
    subreports are reports within a report, and if you have a subreport in a details section, and the report returns 100 records, the subreport will be evaluated 100 times, so it will query the database 100 times. It is often the biggest factor why a report takes a long time to preview.
    3. How many records will be returned to the report.
    Large number of records will slow down the preview of the reports.
    Ensure you only returns the necessary data on the report, by creating a Record Selection Formula, or basing your report off a Stored Procedure, or a Command Object that only returns the desired data set.
    4. Do you use the special field "Page N of M", or "TotalPageCount"
    When the special field "Page N of M" or "TotalPageCount" is used on a report, it will have to generate each page of the report before it displays the first page, therfore it will take more time to display the first page of the report.
    If you want to improve the speed of a report, remove the special field "Page N of M" or "Total Page Count" or formula that uses the function "TotalPageCount". If those aren't use when you view a report it only format the page requested.
    It won't format the whole report.
    5. Link tables on indexed fields whenever possible.
    6. Remove unused tables, unused formulas, unused running totals from the report.
    7. Suppress unnecessary sections.
    8. For summaries, use conditional formulas instead of running totals when possible.
    9. Whenever possible, limit records through selection, not suppression.
    10. Use SQL expressions to convert fields to be used in record selection instead of using formula functions.
    For example, if you need to concatenate 2 fields together, instead of doing it in a formula, you can create a SQL Expression Field. It will concatenate the fields on the database server, instead of doing in Crystal Reports. SQL Expression Fields are added to the SELECT clause of the SQL Query send to the database.
    11. Using one command as the datasource can be faster if you returns only the desired data set.
    It can be faster if the SQL query written only return the desired data.
    12. Perform grouping on server
    This is only relevant if you only need to return the summary to your report but not the details. It will be faster as less data will be returned to the reports.
    Regards
    Girish Bhosale

  • Report server is not working in version 10.1.2....

    Hi all
    From long time i am trying to run the report server in Forms [32 Bit] Version 10.1.2.0.2 (Production) without Network( IP) configuration.But i did not do it.But
    its working fine with IP address.Is it possible to run report server without IP addresss? Help me out thanks in advance.
    sarah

    In rwnetwork.conf in $oh/reports/
    - remove or commented the following
    <multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
    - And then uncommented
    <namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
    - replace the
    %NAMING_HOST% with your computer name or specify an IP address
    %NAMING_PORT% with 14021
    execute in the command line : namingservice.bat 14021
    (To shutdown the namingservice, use : namingservice.bat 14021 shutdown)
    try restarting the reports server and test ..
    hope it helps

  • Regards Fixed asset report in monthly basis

    hi to all
    can you provide any standard reports for fixed asset report on monthly basis.
    Moderator message: Search before posting.
    Edited by: kishan P on Jan 2, 2012 12:05 PM

    <list of reports removed by moderator>>
    Moderator message: Let the OP search for them.
    Edited by: kishan P on Jan 2, 2012 12:03 PM

  • First group heading below displays below column headings using Template 23 Classic Report using Repeat Headings on Break

    Hello,
    I am migrating an application from APEX 3 to APEX 4.2 on one thing I notice with the classic reports when I bring them into Template 23 is that the first break section has the break row display below the column headers for that section while the remaining rows correctly have it display above the headers on subsequent group sections.
    When I look a the code in firebug I can seen that the all tables but the first, the break row is being included as the last row of the previous table so I can see how this would not work for the break since.
    I have tow questions.
    1. Is this really intentional because it doesn't seem  terribly elegant and my users zeroed in on it right away as a perceived bug.
    2. Is there a reasonable work around that still uses Repeat Headings on Break? I have multiple reports on the same page in places so changing over to interactive reports is not a silver bullet for me in this case.
    Example of issue can be seen at apex.oracle.com at  Home
    Thanks,
    Brad

    Roadling wrote:
    Hello,
    I am migrating an application from APEX 3 to APEX 4.2 on one thing I notice with the classic reports when I bring them into Template 23 is that the first break section has the break row display below the column headers for that section while the remaining rows correctly have it display above the headers on subsequent group sections.
    1. Is this really intentional because it doesn't seem  terribly elegant and my users zeroed in on it right away as a perceived bug.
    The Standard report template definition in theme 23 contains thead and tbody elements:
    Before Column Heading
    <thead>
    Column Heading Template
    <th #ALIGNMENT# id="#COLUMN_HEADER_NAME#">#COLUMN_HEADER#</th>
    After Column Heading
    </thead>
    <tbody>
    After Rows
    </tbody>
    </table>
    </td>
    </tr>
    </tbody>
    <tbody class="uReportPagination">
    #PAGINATION#
    </tbody>
    </table>
    <div class="uReportDownloadLinks">#EXTERNAL_LINK##CSV_LINK#</div>
    This is intentional, following best practice for marking up HTML tables. What is not intended is the problem that arises when this template is used with the Repeat Headings on Break break formatting option. The repeated headings result in the table consisting of tag soup containing multiple incorrectly constructed tbody and thead elements, which is invalid.
    2. Is there a reasonable work around that still uses Repeat Headings on Break? I have multiple reports on the same page in places so changing over to interactive reports is not a silver bullet for me in this case.
    Create a copy of the Standard report template as Standard (break formatting) for use with break reports, remove the thead and tbody tags from the template definitions, and change the break reports to use the new template. (Or, if you primarily have break reports using the Standard template, keep the tags in the copy and remove them from the original to minimize the number of reports you have to edit.)
    Personally I'd create a custom row report template for complex break reports in order to be able to have complete control over the structure and presentation.

  • Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

    When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
    Error in Crystal Report:  Failed to export the report.
    This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter).  We have other subreports (within this same report) that print a sql image just fine.  But, when this subreport prints, the above error appears.
    I can run the same report on an XP machine without error.
    Exportmodeller.dll and crtsv.dll are both installed and registered to the
    C:\Program Files\Common Files\Business Objects\3.0\bin folder
    I have tried opening the report, removing the image, and then adding it back in again to the subreport.
    Still receive the same error.
    Any suggestions?

    >
    Don Williams wrote:
    > RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
    >
    > Upgrade to the .NET components and post your question to the .NET forums.
    >
    > Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
    Don,
    Can you please clarify?
    Our VB6 app that uses Crystal XI RDC runtime components.  Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer).  We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
    We can print/preview/export to excel, but the pdf creation is failing with this error.
    We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue).  Therefore, we have to rollback our .NET product and revert to the RDC code. 
    Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
    When you say  "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
    Thank you

Maybe you are looking for