Report RFWT0010 to update withholding tax in open items

Hi gurus!
I'm facing a problem with report RFWT0010 after modifying withholding tax information in the vendor master record.
If I delete a complete line (Withholding Tax Type, W/Tax Code, Liable and so on) when I run report RFWT0010 open items are pulled and updated correctly.
However, if I have a scenario in which I only need to modify the Withholding Tax Code (leaving WIthholding Tax Type and Liable Flag like they were before) when I run report RFWT0010 no open items are pulled.
Can anyone indicate me if RFWT0010 is meant only for withholding tax type changes?? or is it a program error??
Thanks!
Federico

Withholding tax is not supported by SAP here...

Similar Messages

Withholding tax for open items posted from FI-TV-COS

When the open item is generated from FI-TV-COS it is missing the withholding tax detail opposed to the manual creation of invoice for the same vendor in FI.
What is the workaround to have withholding tax detail for such open items coming from FI-TV-COS?

Withholding tax is not supported by SAP here...

How to run RFWT0020 to update withholding tax data

Can anyone explain the difference between these two options when running RFWT0020 to update withholding tax data? Data Regeneration vs. Changes to Source Tax Code? I can't find any mention of the two options in the program documentation
When I do test runs with the two different options, the program is selecting difference documents to update. If we are just turning on the 1099 functionality now (beginning with the 2011 tax year), should I run the program once with Regeneration mode and once with Changes to Source Tax Code???
Thanks for any advice!
Allison

Hi,
he program enables the withholding tax code to be changed for reconciled and open items with existing withholding tax data. For this, the tax rate of the existing withholding tax data as well as the tax rate of the new withholding tax code must be 0%. The new withholding tax codes are taken from the customer or vendor master data. In the case of extended withholding tax, the withholding tax code is only changed if the related withholding tax categories are the same. The withholding tax base amount is not changed by this procedure.
Recreating or changing the withholding tax data requires that the program first be executed for invoices and then executed for payments in a subsequent step.
When you start the program, the selection screen appears. You can make selections according to vendors, tax code 1, tax code 2 (vendor master record), customers, tax code 1, tax code 2 (customer master record), company codes, document numbers and posting data. The selection determines which items are checked for possible subsequent entries in tables BSEG, BSAK, BSIK, BSAD, BSID, WITH_ITEM.
You can also decide whether only withholding tax data is to be handled for cases where the documents in question contain no withholding tax data. There is no withholding tax data if no withholding tax entries exist for the item selected in table WITH_ITEM (extended withholding tax) or the die withholding tax fields in table BSEG are not filled.
The selection can also be made in test mode. If you do this, no changes are made in the database. You are therefore advised to run the program in test mode initially.
Regards
Aditya

Withholding Tax by Line Item (not by vendor)

Hi,
Thereu2019s been more than 1 occasion where clients request for withholding tax at line items (purchase equipment and service in 1 invoice. Equipment no withholding tax but service has withholding tax). However, as far as I know, the withholding tax is applicable by vendor and not by line item of the vendor. Is there any workaround on this?
Regards,
Cheah

If i understand correctly, you have prepared PO for material plus service, service attracts WHT
you could prepare two different vendors - one for material, one for service - even though the vendor is same, and maintain WHT only in service vendor.
under PO there is condition types for service, there you can enter this second vendor who is providing service.
i think this way you issue should get resolved.
Pl share how to finally got thru it.
Thanks
Sanjay

Drill down report for due date analysis for customer open items

Hi, in transaction FDI0 i am using report 0SAPDUEAN-01 Due Date Analysis for Open Items .The reason i am using this is that s_alr_87012178 caters for only 6 intervals. With this report , i get 8 intervals:
daily intervals Due Not Due Total OI
0 - 30 0,00 0,00 0,00
31 - 60 67.000,00- 0,00 67.000,00-
61 - 90 0,00 0,00 0,00
91 - 120 20.020,86 0,00 20.020,86
121 - 150 3.270,00 0,00 3.270,00
151 - 180 0,00 0,00 0,00
181 - 210 0,00 0,00 0,00
211 - 99999 0,00 0,00 0,00
Total open items 43.709,14- 0,00 43.709,14-
Is it possible to change the intervals through custo? i need intervals:
0 - 30
31 - 60
91-120
121-150
151-365
>365

Hi AA
refer this link where in I have given the screen shots
http://img233.imageshack.us/g/86081486.jpg/
The 1st screen shot is COPY of the Std Form
The 2nd scren shot shows how to add new interval
Br, Ajay M

Extended withholding tax - US Error 7Q 301 updating withholding tax

Cannot get the system to allow me to change the withholding tax information on the accounting documents. Extended withholding tax has been configured. The fields in the line items have been opened to allow changes to the withholding tax data, both for K and S. The venodor has been updated for the withholding tax type and code. Program RFWT0010 does not update any records. The funny thing is it works in the sandbox but not the regular testing dev client. I have compared config and it is the same in both places. Any ideas?
Thank you.

Hi,
Please refer to note 363650, you will see the following information;
C) Change Rules for classical and extended withholding tax If the withholding tax base amount should be changed after a
docment has been paid already, the following steps are required:
For Classical Withholding Tax and only if the withholding tax amount is zero.
Change of withholding tax base amount or withholding tax code of a cleared invoice.
If the withholding tax base amount and/or the withholding tax code needs to be changed after an invoice has been cleared please follow steps;
As you see from the above information the following quotation "only if the withholding tax amount is zero". Is this the case in your scenario?
If a withholding tax amount other than zero has been posted, you cannot change the values via transaction FB02.
Please also review the IMG documentation for transaction OB32 via spro -> Financial accounting -> Financial accounting global settings -> Document -> Line item -> Document change rules, line item. here you will see the following information;
Document Change Rules, Line Item
In this activity, you determine under which circumstances fields within posted documents can be changed.
Note
For a number of fields, the system itself determines that they can no longer be changed after posting. This includes all fields which are central to the principles of orderly accounting, for example, the amount posted and the account.
The system also prevents the update objects from being changed in documents which have already been posted, independent of the document change rules
Thus as you can see from the above description if an amount has been posted to the account you cannot change the fields despite entering in the field in OB32 as changable.
Please also be aware that the important table concerning extended withholding tax is WITH_ITEM. This is where the data found through the button 'Withholding tax Information' in FB03 is held.
(For example in the 'Withholding tax data button' If you click on the help of the field Withholding Code and select the button 'Technical information' you will see that the field name is WT_WITHCD) The fields concerned with same
WITH_ITEM-WT_QSSHB
WITH_ITEM-WT_WITHCD
should be customized in the document change rules (transaction OB32) You will also have to ensure that the posting keys in the document are set to optional (transaction ob41)
Regards
Ravinagh Boni

1099 Report for OTV - Classic Withholding Tax

Hello Members,
We run on SAP ERP 6.0 EHP6 and use the classic withholding tax functionality.
Wondering what the rest of the world with classic setup is using for 1099-MISC reporting for one time vendors ?
Currently we follow a cumbersome process of pulling FBL1N report (which doesn't have otv address information), and then FCHN to get vendor address details. With this we change a vendor and update the master data and payment document withholding information in QAS to print the paper form from QAS.
I read a few of the forums and the idea I get is, if the vendor is to be 1099 reported, it should be a standard vendor.
Questions:
1) Any standard functionality available within classic setup for 1099 MISC reporting of OTV ?
2) Does using extended functionality make OTV reporting any better
3) Any best practices that you are following which you think is better than ours ?
Regards,
Ani

Hi,
See SAP Note-802033
Raj

When updating withhold tax window error---"This Property Cannot be Updated"

Dear All,
We have upgraded SAP 8.8 PL14 from SAP 2007B. With respect to TDS, we have upgraded based on the TDS Utiltiy Upgrade. Everything upgraded Properly. But, when we try to edit or change on Withholding tax definition or TDS account, an error is coming "This Property Cannot be Updated". Becoz of this we are not able to continue the entry on Particular Section. We are not able to add new WH Code also, since the same error is coming.
Pl help and sugges how to solve this.
Thanks.
Komanduri

DEAR
if u still face teh error then i would request you to please raise a support ticket for ant Case related to TDS as that would be supported by sap only however the other way around but that would not be correct is to make a new WT code with the differnt code but by doing this when the user would sit down for reconciliation he would not be able to do so as the error would be somewhat "cannot use two WT code category
Regards,
Manish

Update withholding tax records post change in vendor master recepient type

Dear All,
We have created a company ( recepient type CO) vendor wrongly with recepient type defined as OT- Others. The invoices were posted, TDS deducted and paid by selecting proper tax code / rate for corporate and not for others.
However as the vendor master record has the recepient type as OT - the same is updated in the with_item table for all the TDS entries in documents posted for the vendor.
We want to change the recepient type to Company - CO to correct the error in the vendor master record. However when we change the same to CO, the existing line items in with_item table are not updated for recepient type. Thus the open invoices are classified under recepient type OT - others even after change in vendor master. This is affecting our payment of TDS.
Kindly guide how to update the records already posted in SAP to change the recepient type.
Regards,
SAP_2009

Any inputs?

Withholding Tax Report

Hi Friends,
scenario: Vendor invoice posted with withholding tax, entry recorded is
Vendor                           Cr   900
Withholding tax payable Cr   100
Expense account           Dr 1000
Where withholidng tax payable is a GL account where all withholding tax payabe is credited for all vendors subjected to withholding tax.
In the system there are two standard reports available
S_P00_07000134 - Generic Withholding Tax Reporting
S_PL0_09000447 - Withholding Tax Report for the Vendor
these two reports show all the recorded tax line item for selected period irrespective of whether tax is paid or not,
I was looking a report where in i can be able to view only withholding tax wich is to be paid i.e., all the open items in the withhholding tax payable account.
Any one please came across such requirement.
Regards

Hi ,
In case if you are using CIN country version then you can view the report J1INMIS .
In case if you want to view the open item in the GL account , then usually taxation accounts are maintained as open item managed .
Use report FBL3N or FAGLL03 to view the GL account details , put the tick on open items only .
Hope this helps .
Regards ,
Dewang T.

Withholding tax amount is not updated in with_item table

Dear all,
In our system, one vendor invoice posted through FB60. In which, system generates withholding tax lin item. The same line item shows in BSIS and WITH_ITEM tables. It also shows in GL account line item display as open item. But, in WITH_ITEM table system not calcuate tax amount and shows as nil withholding tax amount against withholding tax base amount because of this I will get error at the time of creating challan through J1INCHLN.
Please help us though there is statutatory payment due date.
Regards,
Kalpik

Hi Raghvendra,
Thanks for reply. Why system is not update withholding tax amount only for that particular document ?
So, we can take precaution in future also.
Regards,
Kalpik

1099 Reports(US Withholding tax)

Hi,
Plz help me how to Configure
1099 Reports(US Withholding tax)
Regards,
Padma

Padma,
Configuring 1099 Reporting for US in SAP is pretty much a standard process. However, not everyone I know chooses to use the standard reporting tool inside SAP to generate the extracts that are to be sent to the US Tax Authorities (IRS) for tax reporting purposes.
Since you've not mentioned exactly which format for 1099 it is that you're looking for, I'll assume you are looking for 1099MISC.
Rather than giving you all the steps here, I'll point you to an OSS Note (363650 - Withholding Tax Configuration for 1099MISC). This Note contains the customizing steps for extended withholding tax configuration for US (1099 Reporting).
Of course, once you're done with the config, you'll want to create the tax return extracts. Depending on which version of SAP, you might want to use program RFW1099M (if you're on a version below 4.7) or RFIDYYWT (if you're using version 4.7 or anything above).
This is the reporting tool for generic withholding tax, which SAP recommends to be used for 4.7 and above.
However, be sure to apply all the outstanding OSS Notes applicable for this report, as there are legal changes (which are announced by IRS from time to time) that need to be updated into the SAP system each year.
There are other components involved, like SAPScript form, DMEE engine config for the tax report output, etc. which I'll let you explore on your own.
Happy Learning!
P.S.: Just to get you started in your search for 1099INT, you can start with Note 561568 (1099INT Reporting).
Remember to assign points if found useful.
Regards
Gulshan

Withholding tax amount in fbl1n report

hi,
In FBL1N report When the posting is coming from FB60 or manual invoice, the withholding tax amount will appear in the column but when the posting came from MIRO, withholding tax amount figures appear as zero values even there is a posting in the withholding tax account.

Hi,
Refer
SAP Note 363309 - Extended withholding tax with line item display.
Thanks
Aravind

Standard LSMW for open vendor items with Withholding tax

Hi All,
I am searching the direct input LSMW which is having the Withholdig tax. There is a direct input program in LSMW ( RFBIBL00) but it is not uploaded the withholding tax for open vendor and open customer items.
If anybody know which LSMW is recammanded or anthing related to BAPI or IDOC for this requirements.
Dhiraj.

Hi
If you need to upload the WT tax you have to fill the structure BWITH of std BI RFBIBL00, so your LSMW project should create a file like this:
---> Session data
BGR00
---> Document data
BBKPF (Header data
BBSEG (Vendor or customer item)
BWITH (Withholding tax data)
BBSEG (G/L item)
Max

Withholding taxes at invoice are not totally updated at FMF0

Dear all,
The system consumes the whole amount at budget at the invoice moment but when the payment it is done and updated at funds management by FMF0 that amount is partially consumed.
IF we create an invoice for an amount of 100 u20AC.(it has 10u20AC of withholding taxes) The 100 u20AC goes against a funds reservation doc(linked to an expense commitment item), and withholding tax account (180000) contains a commitment item (retencion) with a
transaction which is not budget relevant (60 and cmmt item category 3).
The figure would be like this
Vendor 90-
Expense 100
Withholding tax 10- [commitment item with transaction 60 ci category 3]
So at funds management the invoice doc(value type 54) consumes 100u20AC (amount type 100)
but when doing the payment
Vendor 90
Bank 90-
and use FMF0 to update payments in funds management the system reduce the invoice document in 90u20AC(amount type 200).
Consequently there is a difference of 10u20AC at invoice document when doing the payment. We would expect to also have 100u20AC of amount type 200. Anyone knows which is the proper procedure so that this 10u20AC gap are not reflected and the 10u20AC are consumed. or what is it what we are missing.
Best regards and thanks for the help

The problem was that we thought the in order withholding taxes wouldn´t be relevant we have to set financial
transaction to 60.I think now the system works as desired, we have set the commitment
item a value of financial transaction 30, commitment item cat. 3 and it is
flagged as stat. commitment item in order withholding taxes are not
budget relevant. I´m not sure yet if this could have other impacts in our business processes.
Hope not
Best regards and thanks for your help

Report RFWT0010 to update withholding tax in open items

Similar Messages

Maybe you are looking for