Report RMMD07EX Error when running in background

Hi Gurus,
Is it possible to run the above report in background?
I tried running it and gave me the error 'Error determining planning periods for calendar'.
Please help.
Thanks in Advance....

Hi.. looks like there is some error in when calling Tr. MDC7 or MSC7... there might be some error in the call transaction... try to debug the code in Background using Tr. SM50 and try to fix the error..

Similar Messages

  • Report giving error when scheduled in background (ABAP/4 processor:PERFORM)

    Dear Freinds,
               I have written a custom program and iam not able schedule in background, if check in SM37 the job getting canceleld and found as the error ABAP/4 processor: PERFORM_NOT_FOUND.
    Please could you let me know should i specify in my custom program for get sucessfully run in background . or could any one please let me know any setting should be done for my custom program
    regards
    madhuri

    Hi
         when i run in foreground it is working perfectly. The Spool is not getting created.
    regards
    madhuri
    Edited by: madhuri_2000 kumari on Nov 26, 2008 2:00 PM

  • Error when running in background

    Hi,
      When i run the pgm in foreground its working fine but if i run in background the job is getting cancelled with the error message "Code page couldnt be determined".I checked in background the value in the o/p is coming but the job is getting cancelled.What is the reason for it?

    Hi,
    In your program are you using any cl_gui_frontend_services methods. That means
    any cl_gui_frontend_services=>gui_download
    cl_gui_frontend_services=>gui_upload
    If you are using frontend services background job. The job will not work
    Hope it will helps

  • RMMR1MRS-When run in background cause update failure errors looking

    hi,
          RMMR1MRS report when run in background cause update failure errors .
    There are few  below reason for the error log.
    1.  for the PO invoice already generated -  (its right if already invoice generated. should not happen again)
    2.  In  MIGO,  entire  quantity has been reversed  and also invoice generated with zero value - ( its right , should not happen invoice again )
    3. Particular PO line item deleted -  (its right if the PO line item deleted. ERS settlement not require)
    For the all above reason, the update error occurs.  But the mean time  the program  "RMMR1MRS"  should not through the update error log. 
    Note: The job was not terminated due to this update error and also no harm because of the error log
    can you please help on this update failure why it occurs.

    Have you found a solution already? If so, please, share it with the community and close this thread.

  • Report program when run in background job getting cancelled immediately

    Hi
    When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
    I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background  successfully.
      CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY     
          EXPORTING                                            
            IS_LAYOUT         = IS_LAYOUT                    
            I_SAVE            = 'A'                        
            IS_VARIANT        = GS_VARIANT                   
          CHANGING                                           
            IT_FIELDCATALOG   = IT_FIELDCATALOG               
            IT_OUTTAB         = BLOCKED_STOCK_TAB_ALV[].     
    Please suggest.
    Thanks and regards
    Rajani Yeluri

    Hi Rajani.
      ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
    system cancelled your process immediately.
    Hope it helps.
    Sayan.

  • Error when running a report in BPC NW

    I am getting the following error when running a report for my application in BPC NW.
    EVDRE encountered an error retrieving data from the Web Server (retrying in (X) seconds).
    This error comes with this dialog option box to either continue or cancel retrying retrieving data. Retrying doesn't help either.
    Any report I run (on any of my appsets), I get this error. I used the EVDRE function and also tried running a report using the template as the basis. But I get the error either way.
    Does anyone know why this error is occurs or how to debug this issue. I saw some information about this in earlier threads but could  not make much out of it.
    Appreciate any assistance.

    Sanjay,
      This  is a   very  generic  error...Couple  of  places  to  look  for....
    1)Reprocess the application (Modify application + Reassign SQL Index + Process Application)
    2)optimizing the application sometimes helps (Full Optimize + Compress Database + Index defragmentation).
    3)Create a "evdataserver_debug.txt" in user's private publication folder on  server side to populate very detail level logging  and  check  the  log on client side EVDRE_LOG.txt for  further  peek  into  where  things  are getting  messed up.
    if  evdataserver_debug.txt does not  get  populated on BPC 5.x...it  is  an  issue  with  IIS authetication on Application server.
    4)You have to check the event viewer into .NET server and also the BPC logs which can be found into
    BPC\Logging  for  further  details  ..
    Hope  this  helps..
    Edited by: Vishal Mahawadhi on Jun 24, 2009 9:50 AM

  • Error when running a report writer

    Hi,
    I am getting an error ("Internal error: More than 999 GREP blocks were requested") when running a report writer.
    The error diagnosis is:
    Internal error: More than 999 GREP blocks were requested                                                                               
    Message no. GR 215                                                                               
    Diagnosis                                                                               
    An internal error occurred in the Report Writer.                                                                               
    When running the program, you selected the option to store your results
         permanently.  However, when the selected data was stored in blocks in  
         the GREP file, the maximum number of blocks was exceeded.                                                                               
    System Response                                                                               
    The selection program was terminated.                                                                               
    Procedure                                                                               
    Inform your system administrator.                                                                               
    You may have to increase the block size for the GREP blocks.    
    Anybody knows how to increase the size of GREP blocks?
    Thanks in advance.
    Regards,
    Arun Mohan

    Hello,
    The reason for the error GR215 is that too many data blocks are being
    processed.
    The explanation is one of the following:
    - You have variation activated in the report
    - A large group of objects is being processed and the report output
       fails due to the large data size
    - the selected data is reaching the technical restriction
    Check the SAP note 64537. This note advises you to set the BLOCK SIZE parameter
    in the coding to 500000. However, the maximum value possible is 999999. You may -
    if you already implemented the coding change of SAP note 64537 - raise the parameter
    once more to 999999.
    If the error then still remains the selected/processed data is definitely too much.
    Then check the report definition in comparison to SAP notes 317574 and 387414.
    Regards,
    David

  • Getting the MDX query select error when running a webi report on BI query

    Getting the following error when running a webi report on BI query :
    A database error occured. The database error text is: The MDX query SELECT  { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] }  ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521]  failed to execute with the error Unknown error. (WIS 10901).
    I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
    Please help in this regard.
    Thanks,
    Jeethender

    The Fix Pack is also for Client Tools--it is a separate download.  Please see the text below for ADAPT01255422
    ADAPT01255422
    Description:
    Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
    The following database error happens: "The MDX query ... failed to execute with the error
    Unknown error (WIS 10901)."
    New Behavior:
    This problem is resolved.
    This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

  • Error in BIM when running in background mode

    Hi,
    I am facing an error when running a BIM in sm35.
    The BIM runs fine with my userid in all three modes( foreground,display error mode, background mode)....but fails when the functional person is testing in background mode. The BIM runs fine in all other modes.
    It gives the message when running in background mode
    "No batch input data for screen SAPLMGMW 4008"
    What should I check or do to correct it.
    Please help.
    Regards
    Rashi

    The BIM runs fine in Foreground mode and in Display error mode even for the functional..It is giving error only for Background mode.
    I also did the following
    1.   Created the BIM in my id and tried running( in background) it using the other id ...it was successful
    2.   Created the BIM in other id and ran ( in background) using my id....it failed.
    I will check again for authorisations also.
    Regards,
    Rashi

  • Win 7 automation error when running crystal 10 reports

    I am getting automation and memory type errors when running crystal 10 reports through a VB6 application on WIN 7 32 bit PC...
    does not happen on all win7 PCs, in fact, the reporting will work for a time and then errors, but once getting the errors, seems like the reports will not run again.

    Honestly, not a clue. I've never even thought of putting CR 10 (designer or runtime) on WIN 7. Now I assume this is not CR 10.5 (bundles with .NET 2008).
    See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki.
    Ludek

  • Jsp Error when running graph reports on 9ias server

    i getting the following message error when running a graph jsp report on my company unix 9ias server:
    org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
         at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
         at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
         at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
         at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
         at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
         at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
         at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
         at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
         at oracle.reports.definition.RWReport.done(RWReport.java:1087)
         at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
         at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
         at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
         at afpdrep.crystal._flip._flip1._jspService(_flip1.java:687)
         [SRC:/afpdrep/crystal/flip/flip1.jsp]
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
         at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
    Thanks for any help in advance.

    Hi Simon,
    Looking at the exception, it seems the machine is so slow that it could not give enough time for the report engines to start up can also result in this exception.
    Please try the following :
    Increase the callbacktimeout parameter for the report server. In server conf file that increase the callbacktimeout parameter for the report server from 1 minute (60000 milliseconds) to 3 minutes(180000 milliseconds)
    Thanks,
    Vinod.

  • Intermitten Errors when running reports in Crystal Report Viewer

    Hi All,
    We get intermittent errors when running the same crystal report over and over again.  Most of the time, it would run perfectly fine.  Once in a while we would see the error message below displayed...
    Failed to open the connection. Failed to open the connection. C:\DOCUME1\USBOAD1\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt
    CrystalReportViewer - CrystalReportViewer1
    Error: Object reference not set to an instance of an object.
    We don't know how to reproduce this error.  We tried looking into the BusinessObjects log files and the error is trapped inside C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Logging\crystalras_2009420_3626_2716_ras.log with the message below:
    ErrorLog 2009  4 21 11:28:28.598 2716 10272 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:756 ErrorMsg:"Failed to open the connection.
    Failed to open the connection.
    C:\DOCUME1\USBOAD1.000\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt" DetailedErrorMsg:"
    Question:
    Does anyone know why this is happening?  Any help will be much appreciated.  It happens maybe 1 out of 10 times the report runs.
    Versions:
    CR XI R2 SP1
    .Net Framework 2.0
    Windows 2000 SP4

    Hi,
    Give it a try by using the close and dispose method for report object and also use the GC.collect.
    Hope it helps!!
    Amit

  • The number of rows per page is greyed out when running in background?

    Hi,
    For a customized transaction the number of rows per page cannot be set when running in background.
    While a background job is created in SM36 after entering the report name and the selection variant name in the properties of Format the rows and columns field is greyed out.It was not editable.
    Is there any settings to be done or in the custom program any code change needs to be done?
    Thanks in advance.
    Regards,
    Sharon.

    Hi Gabriel,
    After double clicking the format only the rows field is not set to edit.It was greyed out.Is it anything related to the printer settings that will be maintained for a user?
    Regards,
    Sharon.

  • Corba error when running rich clients in 3-tier mode.

    Hello
    I am dealing with an Error when running Rich Clients (WebI and DeskI) with 3-tier ODBC connection to the server.
    The client does come up and I'm able to create the query but when the data in refreshed I do get the error:
    A database error occured. The database error text is: (CS) "CORBA Initialization failed". (WIS 10901).
    I have a test server which I'm able to do this kind of connection without a problem but when I try to connect to the Prod server in 3-tier data connection mode throught the server I get this error.
    My setup is:
    BO XI R 3.1 FP. 2.1
    Clients are also updated with FP 2.1
    The data sources are Oracle and Teradata.
    Best regards,
    Hjortur.

    Hi Guys,
    I am facing same error when I run the report from CMC. Error is like u201CThe database error text is: (CORBA) "Error on Executeu201D. (WIS 10901)u201DEven I have re-started the connection server but bad luck.
    I would like to appreciate if someone help me out for the same.
    Thanks in advance..!!
    Thanks & Regards,
    Keyur Modi | Functional Consultant Enterprise Solutions
    TATA Technologies, Pune
    m: +91-9769855899
    website: www.tatatechnologies.com

  • Runtime error when running Authoware session in Vista

    Hi
    One of our users has reported to a error when running an
    authorware session in Vista:
    "I get the message when trying to open the session...
    It says:
    Authorware runtime does not work anymore.."
    Any ideas why this user is getting this problem?
    thanks
    Jon

    I can assure of one thing.. there is no such message anywhere
    in the
    product. You should get the actual message from your user and
    let us know
    what it is.
    Mike
    ====================
    Mike Baker
    Adobe Community Expert
    mike-baker at cox dot net
    "webacity" <[email protected]> wrote in
    message
    news:gfuorj$ebe$[email protected]..
    > Hi
    >
    > One of our users has reported to a error when running an
    authorware
    > session in
    > Vista:
    >
    > "I get the message when trying to open the session...
    >
    > It says:
    >
    > Authorware runtime does not work anymore.."
    >
    > Any ideas why this user is getting this problem?
    >
    > thanks
    > Jon
    >

Maybe you are looking for