Report router rules and drop off library in Sharepoint

Hi,
I am running the report from the Report Setting link in Duet Enterprise. I get the message saying, 'The report has been submitted for processing and will be delivered to your Reports page".
But i am not getting any reports in the reports page. After googling, i got to know that i will have to confiure the Report Routing rules for the same. Also a Drop off library needs to be maintained.
Could anyone please explain the detailed steps for doing both these activities? Being a SAP expert, i dont know much about SharePoint sites.
~ Ramanath

Hi,
lets perform some checks to see where we are actually failing.
The error
User may not be a Duet user.
SAP system not configured or changed on add-on.
SAPID passed was not present in the master system.
means that somewhere on the server where the report is running the information that is retrieved from the SCL server is not correct. In your case these two systems (the server that is running the report and the SCL) are the same, but technically the flow is similar to the case that both would be on seperate system.
So the first thing I would check is if the RFC destination and the logical port that was configured is correct.
(all the following steps are done on the SCL in your case):
At first go to LPCONFIG and search for the Proxy Class: /OSP/CO_REP_ADAPTER_WSVI_DOCUM with Default Port checked.
Make sure that this logical port is active, then go to the Call Parameters tab. Here you should see in the HTTP Destination an entry IWCNT_REPT_ACT_HTTP_DEST.
Double click on that (don't save any changes if you get a prompt) and you will end up in SM59. Here you should see in the target host field the hostname of the SCL server. Under Service No. the HTTPS Port of your SCL system and finally in Path Prefix you should see something like this:
/sap/bc/srt/pm/iwcnt/repadapterwsvi_document/001/duet_enterprise_assertion/1/binding_t_https_a_http__-iwcnt_-repadapterwsvi_document_duet_enterprise_assertion
Before performing a connection test, go to the "Logon & Security" tab. Here you should see in the "Logon with Ticket" secion "Send Assertion Ticket for Dedicated Target System" checked and also SSL Active in the Status of Secure Protocol. The SSL Certificate is set to "ANONYM SSL Client (Anonymous)".
If that is all the case, then click on "Connection Test". The result should be a HTTP 415.
Let me know if that helps.
Regards,
Holger.

Similar Messages

Drop Off Library and Content Organizer Rules allow bypassing of destination permissions

I had a test scenario where
User Betty didn’t have permissions to a destination library (only I had permissions to it)
Via the Content Organizer rule and the Drop Off library, Betty could send a document to a library where she didn’t have access.
Anyone addressing this issue and how? We just don't want people to be able to send things to a destination where they don't have access, but looks like the Content Organizer Rules impersonate some part of the move.
What's odd is you can see the "CreatedBy" as Betty, but she can't go to the library and even see the moved document...permission is denied.

Hi Bubberz1,
This is the known and documented behavior of the content organizer. To prevent someone from using the content organizer in this way, you'd need to prevent them from having access to add documents in the drop off library in the first place, or else
use some other process, such as workflows, to move the documents using the creator's permissions.

Routing from Drop Off library - How to maintain same folder structure in target library after routing

Hello,
After routing from drop off library to other target library, how can I maintain folder structure dynamically.
For example
Inside Drop off library user creates folder on monthly basis
1. Drop Off > Feb > Document 1
2. Drop Off > March > Document 1
Now after routing i want to have same folder structure created inside target library. So target should library look like
Target Lib > Feb > Document 1
Target Lib > March > Document 1
Please Note - folder creation in drop off library happens every month, and user can choose any Name for these folders, so here I can not consider Static Routing rules.
Kindly help me out.
Thanks!!!
Mayank Nigam

The content organizer can't do that. If you really need this functionality, you'll need a workflow to do it. But you also need to consider if the use of folders per month is really what you want here. Maybe you'd prefer to use metadata instead of folders
for grouping.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Drop off library can't route garophic file to gallery

Hello
I have some problem with drop off library, my rule worked correct for document library but when I wrote rule for image gallery can't rout these file, if I create rule just on title of image gallery , That works correct but the other rule can't route file
to destination. What must I do for this problem?

Have you got matching content types? The routing works on a combination of content type and metadata, not just the title column.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Not moving the .pdf files from Drop Off Library to my custom document library in sharepoint 2013

Hi Team,
I am trying to move the .pdf files from drop-off library to custom library.
For the above requirement i am writing content organizer rule condition like (On Group: Document content types & Type: Document)
Property: Name
Operator: Ends with
value: .pdf
and Setting value in target location like
/sites/MS/ProductGuides
How to solve the issue
If help appriciated
Regards,
Dhaya

Hi Dhaya,
I created a Content Organizer rule like this:
When uploading a .pdf file to the Drop Off library, it is moved to the destination library immediately:
I suggest you create a similar rule as above for another test to see if the issue still persists.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Want Content Organizer to overwrite files from Drop Off library not add new.

If I put a file into the Drop Off library that already exists in the target library it appends a set of random characters to the filename and uploads as a new file. I want to overwrite the existing file (maintaining the Document ID) so that we can preserve
links to the file and a quick check of the library shows if all files have been updated from a data call.
Is this possible?
There is no overwrite checkbox in the Drop Off library upload dialog.
Thanks,
William Meisheid
Serco-NA

Within the library settings of the recipient/receiver library e.g. Site Assets, make sure that there is at least minor versioning set. In addition, within the Content Rule Organizer Settings panel, make sure that in the Duplicate Submissions section, the
'Use SharePoint versioning' is selected.

Retention Processing does not move Document Set to the Drop Off Library

Hi Everyone.
Had Retention Processing working fine. Moving files between Document Librarys and the Record Centre using Information Management Policies to move to the Drop-Off Library where the Content Organizer Rules moved them to the relevent Library.
It has all come to a grinding halt with the following line in the '14 hive' logs.
Skipping retention processing for item /doc/Housing/1 RET TEST SET on web http://moraysrv052/doc because there is an unprocessed schedule update. 1b1dfe42-28f9-440a-b84a-17c20aa9c7d6
I have searched the Internet and these forums but can find no reference to this error, Can anyone help as automatic retention policies are crucial to our Sharepoint Implementation.
Cheers
Ross Urquhart

Vinit
Thanks for the advise but not the answer unfortunately.
I have the Content Organizer & Expiration Policy Timer Jobs running every 15 mins, Information Management Policy runs Weekly as this only effects changes to Policy. I have changed the times so all jobs run every 15 mins. Still get the same error message.
Expiration worked perfectly before when it was triggered by Closure Date, A column we created which the user populates to indicate the Document can be closed. Retention then moves the Document to the Record Centre. I changed the trigger on one of the Document
Sets to be Created Date and this generates the error, Change this back to Closure Date, no error, Document moves to Record Centre Drop Off Library.
Another observation. If Retention is against a any other Content Type it is called Created if it is against a Document Set Content Type it is called Created Date, however when you review the Compliance Details of the Set it is called Created.
Does this trigger any ideas.
Cheers
Ross Urquhart

Document corrupted when sending file to drop off library using records repository submit file method (official file web service is used)

I am trying to submit files to drop off library through a simple web application. I could see the documents submitted to drop off library but the contents in it have got corrupted.
string recordRouting = "Test Original Document";
using (Officialfilewebservice.RecordsRepository f = new officialfilewebservice.RecordsRepository())
                string myFileName = @"D:\FileDrop\Testfile.txt";
                string filename = Path.GetFileName(myFileName);
                Byte[] inputbytearray = System.Text.Encoding.ASCII.GetBytes(myFileName);
string x = f.SubmitFile(inputbytearray, newArray, recordRouting, filename, Environment.UserDomainName + "\\" + Environment.UserName);
the code for the "newArray" used as part of the SubmitFile method is below:
string itemname = "abcdef";
  string serviceURL = "http://..........";
  string result = GetTaxonomyTerm(itemname, serviceURL)
  Dictionary<string, string> metadata = new Dictionary<string, String>();
  metadata.Add("TestDocumentType", "-1;#" + itemname + "|" + result);
         metadata.Add("ContentType", "Test Original Document");
         metadata.Add("TestRequestId", "9999");
        metadata.Add("TestProjectId", "8888");
                f.Url = "http://../../../../OfficialFile.asmx";
                f.UseDefaultCredentials = true;
                foreach (var item in metadata)
                    Officialfilewebservice.RecordsRepositoryProperty prop = new Officialfilewebservice.RecordsRepositoryProperty();
                    prop.Name = item.Key;
                    prop.Value = item.Value;
                    prop.Type = "Text";
                    propertydetails.Add(prop);
                Officialfilewebservice.RecordsRepositoryProperty[] newArray = propertydetails.ToArray();

Hi,
According to your post, my understanding is that you want to upload files to drop off library.
Here is a blog with the code sample for your reference:
Uploading Documents Programmatically to a Content Organizer Enabled Site
http://www.codeproject.com/Articles/497729/UploadingplusDocumentsplusProgramaticallyplustoplu
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

I am getting a "Internal error occurred" message when I try to drag and drop common library items on to my canvas.

Hi,
I am getting a "Internal error occurred" message when I try to drag and drop common library items on to my canvas.
I have noticed that there are a number of these error messages and tried one solution of renaming a couple of files, I tried this and no joy.
Has any one go a solution for this before I purchase Fireworks please?
Kind regards,
Dave G

I can no longer get Firework CS6 to run - The program loads but without any toolbars/properties etc. It just has an 'AN INTERNAL ERROR OCCURRED' message that cannot be dismissed. The only way to close the program is via Task Manager (this is on a Window 8 PC). I have uninstalled the program, rebooted the PC and re-installed (several times) but it has not resolved the problem.
Fireworks is part of my Creative Cloud subscription and when reporting this via the live chat I was given the telephone number for Seagate Drives ??
Anybody got a solution?
Or, does anybody know how to open native Fireworks CS6 png files in Photoshop *but* with all the Fireworks layers preserved.
Think I'll also post this as a new topic as the problem is slightly different to SirBasher's issue.

Records center drop off library column validation

In the drop off library of records center, I created a column as a required field. When users send their documents to the records center, I want the user to be able to select the value from the dropdown box of this column in order to complete the "send
to" process. Is there a way to implement this? I tried to use column validation function by adding formula, but it doesn't work. I only got "Sorry, something went wrong" message. If anyone has similar implementation before, please guide me to
the right direction. Thank you very much for your help.

Hi Bob ,
Every time the Content Organizer Processing job runs, it sends an email message for any item that fails to match a rule. When a submission doesn't match a rule, the rule manager must be alerted immediately
so that the appropriate action can be taken. This is the expected behavior.
So for quitting sending email to the content owners, the only way is disabling the Content Organizer Processing job.
By default the Content Organizer Processing job runs once per day, with compromise you can balance the timer job frequency against the need for the content owners to be notified.
Reference:
How to disable Content Organizer Processing job from sending email?
Best Regards,
Eric
Eric Tao
TechNet Community Support

Predict Trip time duration from Pick up and Drop off Latitude and Longitude using Azure ML Studio

I'm using Microsoft
Azure Machine Learning Studio to create an experiment for predicting
time duration of a trip by using
a data set containing previous records of the trip time along with latitude and longitude of the pick up and drop off location.
Can anyone help me out with whatregression model (or
R-Script optional) should I use to train my model?

Hi,
Are you training with raw latitude/longitude? If so, you should try clustering the start/end points into groups. An easy way to do this is to take a decimal or two off the values. Otherwise, the algorithm is seeing
many, many, unique pairs which may degrade the model performance.
You will probably also want to use the
Learning with Counts modules to summarize that lat/lon data because even with clustering, the features will still have high dimensionality. Here's some info on learning with counts:
http://blogs.technet.com/b/machinelearning/archive/2015/02/17/big-learning-made-easy-with-counts.aspx
Also, we did some experiments on similar data so if you want to read more about that see:
http://blogs.technet.com/b/machinelearning/archive/2015/04/02/building-azure-ml-models-on-the-nyc-taxi-dataset.aspx
Hope this helps!
Margaret

Configure Drop off library with no permission for users on target document libraries

I have configured content organizer feature and created 3 rules with 3 target document libraries.
Users have only permission on drop off document library.
When they upload, document is moved to target doc lib, but pop-ups message saying you do not have access to view.
Is there a way to stop that message from showing?
We do not want to give permission for users on target libraries.
Thanks,
Abhilash

As per my knowledge, you cannot supress this message
However, you can create a redirection script on Upload.aspx page which will redirect users to home page once document uploaded.
Here is an example of same:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/1c22db84-b652-43bb-b85b-f1757e65e531/redirect-to-a-custom-confirmation-page-after-upload-the-document?forum=sharepointgeneralprevious

IPhoto 09 picture drag and drop form library to an album results in incorrect picture dragged dropped

Hi,
I think that my problem started when I installed ML...
When I import a picture in my library and then drag and drop the picture in an album (for example an empty one)... when I open the album, the only picture there is not the one I draged and dropped, but another one from my library... it's ths same when I repeat that for any other picture...
Any idea how to sort this

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How to Track Clicks on Buttons, Triggers and Drop-Offs

In my presentation, I want to be able to keep track of every time someone clicks a button and what button they click. I also want to be able to keep track of when people drop off from the presentation. Is this possible with Captivate?
Thanks,
Vince

add a stage covering rectangle to the lowest layer of your external swf and make sure the stage sizes of the loading and loaded swf are the same. convert that shape to a movieclip and assign an instance name (eg, bg_mc). in the actions panel, you can use:
bg_mc._alpha=0;
bg_mc.onRelease=function(){
bg_mc.useHandCursor=false;

Limitations on Using Human Task advance routing rules and stages

In one of our requirement we have used human task with different number of stages (14 stages ) and for all this we are using only one human task component and to route the task through different stages I am using advance routing rules (30 rules),we have exposed this through bpel .My code is working fine .
My question is:-
1- Do this kind of design contain flaws, is there is any restriction on using of number of stages and number of routing rules. Is there is any best practise which suggests that we cannot have more than certain number of stages or routing rules..??
2-Is it feasible to use different human task component for each of the human task stages and route the data using business rule, but that will be very exhausted and unnecessarily making bpel heavier, also the front end people will be having more number of bpm urls which will make their work tedious.
Please suggest .
Thank you

This doesn't sound good. That's an EJB internal to BPEL if I'm not mistaken. Did the install go ok? Has this ever worked before?
I'd check the logs on startup for any sign of an exception. This may be the symptom of a problem which will be logged on startup.
Also, search metalink and open an SR -- this EJB isn't something you need to configure in a normal install -- at least not that I'm familiar with.

Report router rules and drop off library in Sharepoint

Similar Messages

Maybe you are looking for