Report showing changes in Personnel group/subgroup
Hi,
We need a report that lists employees who have had changes in ther personnel group and/or personnel subgroup. Is there a standard report we can use, or do we need to write our own?
Thanks in advance
Kirsten
Hi Kirsten,
I haven't come across any such report that gives only data related to Employee Group / Employee Subgroup changes......
You will have to write Custom Report to achieve this functionality.
Check this,
There is a program RPUAUD00 (Trailing two characters are zeroes) provided by SAP which allows us to see any changes that happens to data in an infotype through add / modify / delete. When you execute this this program and specify the employee code and infotype in the selection screen, it gives us details of when the data was changed, who changed the data and what data was changed in a particular infotype.
Good Luck !!!!
Kumarpal Jain.
Similar Messages
-
WBS Report Showing Change logs - ex: system status
Hi,
I would like to know if there is any report that would show the change log for AVAC for WBS Elements (i.e. change data of system status). I tried running CN60 but it does not give any results.
Thanks!
VivianHi Sarang,
Thanks for your reply.
Would you know if there is any specific report for this instead of having to look up individually?
Also, in order to view the change document for both Project Definition and WBS Element, I understand there is some config that need to be done. Could you confirm if below are complete / correct?
- project profile - tick on change document (OPSA)
- Project Definition and WBS Element status profile (user status profile) - set business transaction to allow "create change document"
Thanks!
Vivian -
Business View change does not show in existing Parameter Group
I have an existing report that includes a dynamic, cascading LOV and associated parameter group. The LOV is based on a Business View.
I modified the Business View to limit the available values. (Actually, I modified the Data Foundation and then updated the Business Elements, Business View, and LOV.) I cleared the LOV using the Business View Manager, rescheduled the LOV, and received a message indicating that the refresh was Successful. If I open the report, the old list of values are still displayed.
To test, I created a new report. I used the Enterprise as the data source and selected the Business View used by the LOV and parameter group. If I query the Business View, I only see the rows I expect to see after the change made to the Data Foundation, Business Elements, Business View, .....
How do I force the existing report to use the current LOV?
thanksPlease check whether the following SAP helps:
Business Objects Notes Get Help | Close
1196364 - Need to refresh List of values (LOV) in the prompt, to be able to see list with all values in InfoView
Language English Version 21 Validity: 11.07.2008 - active
Edit Print View Show change log Show Internal Memos Compare Versions
Content: Summary | Header Data | Other Properties
Symptom
Refreshing report with prompts, the list of values (LOV) does not appear.
LOV needs to be refreshed for the values to show/appear
Reproducing the Issue
Environment :
BOXI 3.0
Cause
Keep last selected value option is defined in the prompt property.
Resolution
Clear the option Keep last selected value in prompt property.
Save report
Keywords
WebI WebItelligence show prompt refresh Rich Client
Header Data
Released on 17.07.2008 14:42:32 by James Terry (I817754)
Current Release Status Released to Customer
Target Release Status Released to Customer
Responsible Stephanie Adam ( I049611 )
Category Problem
Application Area BOJ-BIP
Product Version BOBJ ENTERPRISE XI 3.0
BOBJ ENTERPRISE XI
Other Properties
Business Objects Article ID 2060972
Business Objects BugID ADAPT00898429
Business Objects BugSystem ADAPT
Business Objects ProductFamilyMajorVersion BusinessObjects Enterprise XI
Web Intelligence XI
Business Objects ProductName BusinessObjects
Web Intelligence
Business Objects ProductMajorVersion Web Intelligence XI
Business Objects BuildVersion 11.5.0.0
Business Objects SupportQueue Design
Business Objects ProductLanguage English -
Generate report to show all users and groups in Shared Services in EPM 11x
Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~AdeebaYes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba -
Report only showing items from one group
Post Author: webdevguy
CA Forum: General
I have two tables in a Btrieve database: Customer and CustomerType. Customer contains a field called CustType that is mapped to the ID field of the CustomerType table. In my report, I have the results grouped by CustomerType.ID with the group name pulled from CustomerType.Description.This mostly works. However, only results from the last CustomerType in the database are displayed. There are a number of other customers who belong to other groups, but only those with the CustomerType "Residential" are shown. There is no formula or anything in the Select Expert that would cause this.Any ideas?(By the way, I'm a Crystal Reports newbie. Sorry if this is a stupid question.)Post Author: webdevguy
CA Forum: General
Thank you! Changing the link to Left Outer Join caused the other records to display. However, the "Residential" customer type is the only one with grouped records. All other records are placed under a group with no name, even though those records have different CustType values. Also, there is nothing in the group footer, so I assume it isn't that. -
Using SubReport to show Details of field grouped in Main Report
Hi Experts
I am creating a Crystal Report from BEx Query . In Report i have Created a group on Cost center field.
& some other fields are in detail section. Suppose if i execute report then groups are A, B, C, D ......
Now further requirement is when i click on one group for example 'A' then i should get detail of that group in
different subreport.
Is it possible?
Regards
AjayHi Ajay,
Follow this Steps,
1,Create a Group with 'Cost center'.
2,Delete the 'group name'(A,B,C...) form 'group header'. Now you will get a group with no headings.. which means GH #1 section should be blank for now.
3, Insert the OnDemand subreport in to the Group header.(The same place which we have Group header name before)
4,Set "Subreport link as "Cost center". (Right click on subreport>Change subreport links>double click on 'Cost center' in report feilds-->OK)
5,Now the important thing, Change the "On-Demand Subreport Caption " as group name.
(Right click on subreport>Format subreport>Subreport Tab>Click in 'X-2' button of "On-Demand Subreport Caption ">Formula editor will popup, then right like
GroupName ({Cost center}) // Or double click on the Group #1 Name in the Report Fields tree in Field tree-->Save And Close)
6, Change the font,Font Color an d uncheck the underline.
This will work for you,
Regards,
Salah.
Edited by: salahudheen muhammed on Sep 23, 2009 11:53 AM -
Propose or change automatically, Employee Group and Subgroup.
Dear all, when executing an exit Action, thru transaction PA40, what's the best way to propose by default/change automatically, the employee group/subgroup?
Example: I want to change the employee group from '1' (Active) to '2' (Inactive), but the fields are disabled for input.
Do i have to do this thru the enhancement "PBAS001", or is there any way to do this thru configuration?
Sincerely,
Hugo FerreiraI was searching for something in SDN and got this post.
Though it's a very late reply, whatever Sreenu has told is correct.
In the table T529A, you can define the employment status wehther it has to be active, withdrawn or inactive.
This field is input disabled in the action and the values will be defaulted from the configuration.
But Changing the employee group and employee subgroup , we can't change. If that is what is required, the values might depend on the configuration.
And even through some enhancement also we can't change. because, for IT0000 no enhancement are available. Even though the fields are from IT0001, I doubt it can be changed through enhancemnet.
If you have already achieved it through enhancemnet, please let us know.
Thanks,
RSS. -
Can we show the root qualification group in tx PPPM & Matchup
We have a requirement to show the root qualification group in PPPM and once the match up is done to also show the root object and not the direct parent qualification group.
Is it possible to add another column in tx PPPM or to modify the content in an existing column.
E.G. In the qualification catalog tx OOQA it displays as follows
QK Degrees
-QK BSC's
- Qual1
- Qual2
-QK BA's
- Qual3
If i check on PPPM or on the screen after i have done the Profile match-up It reads as follows
Qualification Group Qualfiication
BSC's Qual1
BSC's Qual2
BA's Qual3
Their requirement is that it should show as follows:
Qualification Group Qualfiication
Degrees Qual1
Degrees Qual2
Degrees Qual3
Please assist if possible.Hi,
You can copy and change the standard screen of the relevant subprofile.
First goto SPRO - Personnel Management - Personnel development - Functions - Define profile view - Subprofiles.
There find the report and screen of the subprofile - qualifications.
Then you need the help of an ABAPer to copy the existing screen along with the function group -RHPP as far as I remember - and make the changes accordingly.
Then you need to map the new screen to this subprofile.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Jun 9, 2010 2:35 PM -
Recovery Point Status Report Shows Only One Day
Hello. Our Recovery Point Status Report showed us the last five days until about a month ago and now it only shows us one day. Just happened over a week-end when there was nothing changed on the server. We appear to have recovery points that go back
a week and the recovery point status is set to a month. We are running System Center 2012 R2 DPM.
Any help is appreciated, thank you for your time.
gHi,
Check your status report granularity settings for each protection group and make sure it's set for 1 day instead of weekly.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Conditional Data show / change values to be shown for months
Dear All,
I am trying to make a report for Employee Compensation History with the following query
SELECT T1.DocEntry, T2.Period, T2.u_payperiod,T0.dept, T3.Name, T0.empID, T0.firstName,
T4.U_note,T0.lastName, T1.U_ebasic, T1.U_ehra, T1.U_etrspt, T1.U_ecola,
(T1.U_ebasic + T1.U_ehra + T1.U_etrspt + T1.U_ecola) 'Sub-Total 1',
T1.U_education,T1.U_grosssal, (T1.U_grosssal + T1.U_education) 'Sub-Total 2',
T1.U_oadd, T1.U_enothour, T1.U_ebonus, (T1.U_oadd + T1.U_enothour + T1.U_ebonus) 'Additions Sub-Total-3',
T1.U_dedhra, T1.U_dedtrans, T1.U_dedsa,
T1.U_oded,T1.U_ducloan,(T1.U_dedhra + T1.U_dedtrans + T1.U_dedsa + T1.U_oded +T1.U_ducloan) 'Deductions Sub-Total-4',
T1.U_netsal, T1.U_bank, T1.U_accno, T1.U_Remarks
FROM dbo.OHEM T0
INNER JOIN [dbo].[OUDP] T3 ON T3.Code = T0.dept
INNER JOIN [dbo].[@PAYROLL_PR_DETAIL] T1 ON t1.U_ecode=t0.empid
INNER JOIN [dbo].[@PAYROLL_PROLL_HEAD] T2 ON t2.docentry=t1.docentry
INNER JOIN [dbo].[@PAYROLE_PP_HEAD] T4 ON T4.u_srlno=t2.u_payperiod
In crystal Report I have made a Group of T0.firstName which is the Employee Name, Second I have made a group of T4.U_Note wherein Each Month is displayed ( E.g Jan, Feb, March, April, May...till December ).
I have bought u_ebasic ( which is the basic salary ) in the second group row. Next T1.u_ehra and so on side by.
Hence the reports looks like
Employee A u_eBasic u_ehra
Jan 09 5000 2000
Feb 09 5000 2000
March 09 6000 3000
April 09 6000 3000
May 09 6000 3000
June 09 6000 3000
July 09 6000 3000
August 09 7000 3500
September 09 7000 3500
October 09 7000 3500
November 09 7000 3500
December 09 7000 3500
Now I want to display in the above only the changes row in the report. Means Jan09 should show as its the starting then March 09 with the value of 6000 for Basic and Hra should show as its revised, then August 09 should show with the corresponding vales and supress or skip all data where there is no change.
How to achieve such conditions through Crystal Report. Please advise.
Best Regards,
DepikaHi deepika
Actually, my input is quite simillar to what Graham has suggested. only difference is the object should be suppressed and the display of data should be handled.
because your core requirement is to conditionally display the data based on some logic.
Let me rephrase the statement
Instaad of putting the database fields directly into the designer, please use formulae variables.
that means, the new formulae which you have created each will hold each database field.
Design the blank report with formuale and use suppress option of the object to conditionally display the data you want.
Int his way, you will have less maintenance in future. My idea is similar to adhoc reporting. -
Hi Experts,
We have two different account groups with different number Ranges. When i try to change the customer account group from one to other through XD07 system given the following warning message.
Customer 600021 not in External Sold-to-Party
- number range 0000100001-0000199999
Message number F2691
We have tried to change this warning message in to Error message through OBMSG and OBA5
after that also system showing warning message.
Where we do mistake? is there any other process to do the changing message?Hi,
If You are trying to change the account group of a customer whose partner function is Sold-to-party.
Changes to the account group and the relevent partner functions only made from lower level to higher level.
Example:
Sold-to-party cannot be assigned the function of a payer(Higher level to lower level) because you are trying to change the higher level partner function.
Your can assign sold-to-party function to a payer (Lower level to higher level) because you are trying to change lower level partner function.
Regards,
Krishna Kishore -
Report on changes to sales orders
Hi Experts,
I am looking for a way to report on changes to sales orders, specifically the row shipping date and quantity.
I can see that the data is apparently in tables ADOC and ADO1 but am having trouble getting useful results. What I need is a report that, for sales orders only and for a date range, shows all changes to row quantities or row shipping dates. The type of output that would be useful is:
Change date - document # - row# - Item code - old shipping date - new shipping date - old qty - new qty
filtered on change date for sales orders only. This seems beyond my preferred option of XL-Reporter and I'm getting lost in the history tables in creating a query.
Best Regards
MatthewHi,
Without doing the query for you, history tables are linked as the "normal" table but with the addition of the LogInstance column. Then the UpdateDate column (from base table ie. ADOC) will tell you when it was changed.
Your query isn't an easy one... SInce you have to link an instance (ie. LogInstance = 1, which will be the original created object) to all the modified ones.
Regards,
Eric -
MC$4 report shows PO value in wrong currency
MC$4 report shows PO value in wrong currency EUR (EURO) eventhough PO
was created with SEK (swiss) currency. Report picks data from info
table S012 that also reflects wrong currency.
Please check attached example....
Currency is getting picked up in table S012 info-structure from company
code table T001 (PO belongs to) not from purchase order.
This is certainly bug in standard SAP LIS report. This is inbuilt LIS feature given by SAP & we cannot do any fixing.
Can you provide solution how we can correct this error. How to display correct currency in report & info-structure S012.hi
in the report the system might be taking the co code currency
what u have to do is go to MC$4 press ctrl+F7
u will get the currency change option change it to what u want
regrads
kunal
awrad if helpful -
EPM 10 NW Report showing error - No Current connection
Hi Team,
We are using EPM NW 10 Version SP 15 Patch 1.NET 4
When we Open the report from offline , The report is showing Error : " Error - No Current Connection"
And also some reports showing Value error , While opening the report in the offline . In this report we used EPM retrieve formula
This issue facing for one user machine
Please suggest whether we need to change settings in the user machineHi Andy,
No Offline Mode.
After refresh the EPM report , We saved the report locally in the desktop
The problem is User send this report to another user
So receiving user , When ever he opening that report , Its showing this Value error
He using the Excel 2010 Version
Please suggest -
Changing Availability Checking Group in Sales Order.
Hello Gurus:
We changed the checking group in the material master. The existing sales orders still shows the earlier checking group. So how to change the checking group in existing sales order also (after it is changed in material master). Also, once the checking group in sales order is changed, how to de-commit and re-commit material as per the new checking group. Thanks.
- ChetanChetan,
As you have changed Checking Group in MMR later on all ur availability check etc will be calculated as per previous MMR settings..
Still go to OVZ9...See if your sales order has correct Check rule/Group..
Then Go to sales order Carry out availability check again...See if Avalability Overview has changes as per your new Check Rule..
Also Do Some R & D...
Like test with change in quantity of line items...save and carry out avalability check gain..See if schedule line dates in Sales order Is there any change?
See if any change is there...
If not better create new sales order...it will minimise your efforts and will be quicker way..
REWARD IF U FINDS THIS AS USEFUL...
Regds
MM
Maybe you are looking for
-
I have version 10.6.3.25 of iTunes and I have just bought a new iPod touch, I want to set up my account and download free apps but to do that you need to confirm bank/account details for security or something. I do not have a credit card but I do hav
-
After Update, Whatsapp, App World ando so on only work with Wifi
Hi I updated yesterday from 4.6 to 5.0, everything worked fine, but now I can only connect to Whatsapp and App World with Wifi :/ It's a8520 Thank you for your help
-
11gR2 Error when installing a database and schema
I have install 11gR2 on my laptop with window 7 4gb ram 500gb hard drive I getting this error ORA-01503: CREATE Controlfile / Failed and ORA-01158: Database already mounted i need to set up a database a 3 different schema because i am doing a install
-
Size/Angle Jittering and Scattering with a "brush tip" in full color?
Is there any way to emulate the options available for a custom brush tip created from an image, yet still keep all the color information? I know this can't be done with a regular brush tip, but is there another way to pull it off other than copy/past
-
Finesse Fail over behind a proxy server
As per the following link https://developer.cisco.com/site/collaboration/contact-center/finesse/overview/technical.gsp summary :- The gadget includes JavaScript and references to various web services. Browser can't have connections to servers in mult