Report showing milestones due for billing

a company handles many projects simultaneously. Let's say 100 projects.The overall controller wants to look at the milestones of all the projects due for biiling so as to help him understand cash flow situation.
Where to find or configure such kind of report??

Hi,
In my understanding this is the requirement of Revenue recognition functionality implementation. This is more SD than PS function. Please use T-Code ‘VF44’ , or ‘VF47’.
Please remember that the RR functionality was not enough stable in the ver 4.7 so you must have ECC5 in place.
Enjoy SAP….
Don’t forget to give points if its useful ans.
Namskar,
Ketan Dave

Similar Messages

  • "Invoice History Report "show wrong balance for supplier invoice with USD

    Invoice History Report show wrong balance for supplier invoice with USD Currency
    After I run this report i see in the last of this report there is difference between the supplier total
    USD (Currency ) and the open Balance USD , it is decreased the open balance
    for supplier with 2300 USD with out any reasons
    bellow is some data copy of the report
    ======================================================
    Supplier Site Total: SAR 34,700.00
    Supplier Site Total: USD 39,000.00
    Supplier Total: SAR 34,700.00
    Supplier Total: USD 39,000.00
    Open Balance: SAR 34,700.00
    Open Balance: USD 36,700.00
    *** End of Report ***
    ==============================================
    please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
    or it is bug in this report , becuase i compare this report with other report in account payable like
    -supplier open balance letter
    -invoice register report
    -invoice aging report
    all this report give me the amount for supplier USD =39000
    BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
    thanks

    Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
    Thanks

  • Purchase report on PO due for delivery

    I wanted to get report of list of PO due for delivery/not yet delivered though delivery date is past
    When i go ME2M, give open GR in Selection parameters and give delivery date then execute this gives list of PO's still need to be delivered
    In output we dont have delivery date to review, is there any other way to fetch a report of list of PO's due for deliver and output must have delivery date as a column
    Thanks

    Check this links
    past Due delivery date in PO
    Report: PO with delivery date
    Delivery due in days

  • The fax confirmation report shows all zeros for officejet 6600 printer

    the fax confirmation page shows all zeors for date and time.  How do I set the printer so it prints the correct date and time?

    Hi CJChristian,
    Welcome to the HP Forums!
    I understand that your confirmation date and time fields are all zeroes with your HP Officejet 6600, and I am happy to help you!
    Please take a look through this guide. Setting Up the Printer Hardware for HP Officejet 6600 and 6700 Premium H711n e-All-in-One Printers. Select the Officejet 6600, and look for Step Seven Set the Date and time.
    Also this guide may help too. Setting up the HP All-in-One to Send and Receive Faxes.
    Hope these guides are useful for you, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Need: report showing modification dates for all files in WA

    We're having struggles in our first major product release of BC4J components on OC4j
    using OSCM for version control.
    Mood and release processes are getting more and more extreme as a result of not
    being able to easily manage our release configurations (CM).
    We're desparately in need of a report that shows:
    - what files have been modified VS a configuration name.
    - What files have been modified since I refreshed my WA
    In both we need to be able to print the list.
    Any sql scripts to share or cmd line script would greatly be appreciated!
    Thanks,
    curt

    David,
    Great, I'm making progress! Thanks.
    Yes on the CLI compare of two cfg's, got this working. THANKS
    use of the -fs<myfile> exports this to a printable file too.
    Work in progress:
    - Compare a cfg{N.M} to what's in a pwa or what would be in a pwa if refreshed?
    Experiments here haven't yeilded good results:
    CLI: set workarea myReleaseWA
    CLI: compare -rpmyCfg{1.0} -rpFolderInWA{MAIN;LATEST}
    Some how the directory walking is comparing apples VS oranges and all paths are different.
    - What files have been checked into a branch and I would get if I refreshed my PWA?
    Your SQL above doesn't exactly do this from my experiments.
    The c.spec_entry is null filters on currently checked out files.
    Config. Management may (usually) doesn't care about checked out files, just new checkins that
    a new release would get from a download latest.
    The best I've been able to hack are:
    CLI: set workarea my_release_pwa
    CLI: dir -s-nh-u-pth
    Since dir doesn't support -fs<myfile> or >myfile one needs to cut and past and save to a file
    or use CLI in one shot mode.
    This allows for greping/searching on current month and looking for files newer than the last release date.
    Another SQL based solution that orders the above same info from dir (I'm guessing?) is:
    select w.NAME wa_name
    ,va.changed_by
    ,to_char(va.date_changed,'DDMONYY HH:MI:SS')
    ,va.created_by
    ,to_char(va.date_created,'DDMONYY HH:MI:SS')
    ,jr_name.get_path(c.object_ivid,'VLABEL') obj
    from i$sdd_wa_context c
    ,i$sdd_workareas w
    ,i$sdd_version_associations va
    where w.irid = c.workarea_irid
    and w.name = 'smithc04_commissary_wa'  ---- my pwa
    and va.to_ivid = c.object_ivid
    and c.spec_entry is not null
    and va.date_changed is not null
    order by va.date_changed desc
    /This creates the same report as from dir only sorted conveniently.
    Still the use case question hasn't been precisely answered. I'm still guessing what new files/versions
    would be downloaded vs a release configuration or vs my [release_pwa]?
    I'm alot closer though and thanks,
    curt

  • Fbl5n report showing pritn output for a new customer on a new page

    Hello  All,
    In fbl5n when i execute for all the customers and give print command its printing every new customer on a new page but i want to print the data continously.
    Pls let me knw how to avoid this?
    Sunny

    Hi Sunny,
    you're case is quite common, because SAP displays the customer data in a standard layout, putting a page break after every customer and company code.
    In order to avoid this, you may change the grouping criteria. For that,
    1. be sure that you have not clicked on the header of any column in the list
    2. click on button "sort ascending"
    3. here you'll see that fields "company code" and "account" have an asterisk on column NG (new group). This means that, for every change in these fields, SAP will insert a page break
    4. remove these asterisks
    5. (optional) save this layout for further launchings of the report
    I hope this helps. Best regards,
    Alvaro

  • Report showing independent requirements for several materials

    Hi
    Workiing in SAP 4.7
    Looking for a report where I can see independent requirements over time,  for several materials, based on a time characteristic such as month/week. So for example I want to see the independent requirements for 10 different materials in a list, with the time characteristic on the horizontal axis.
    Is there any such report? I am NOT asking for MD05/MD06/MD61/MD62.
    Thanks in advance,
    Lars
    Edited by: Lars Tornblom on Apr 27, 2011 10:09 AM

    Check in MD73
    if you are using requirement plan then check based on requirement plan else check based on MRP controller by giving period

  • HFM 11.1.1.3 ICP Report showing wrong value for Entity Currency Total

    Here is the situation.
    There are transactions on a ICP account (Entity Currency) 3.305.080
    A journal is posted to the same account with the same POV. 307.205
    When I run my ICP report on Entity currency i get the correct figure. 3.305.080
    When I rum my ICP report on Entity Currency Total I get a wrong figure 307.205 (Equalt Entity Currency Adjustment) where it should have been 3.612.285
    Any clues anybody?

    There is no limit. In reality there has not been a limit to the volume of data in a single subcube since paging was added in the 4.0 release. Certainly since 64 bit HFM was introduced there really is no limit to the amount of data in a subcube, or the database for that matter.
    Now that I've said that, 850,000 records in a single subcube is a lot of data. Prior to 4.0, the development team added an warning message when a subcube exceeded 100,000 records, but this was purely informational. You should still heed the notice. Most applications have a largest-cube size somewhere between 35,000 and 100,000 records (the top entity usually). While I've seen as many as a million records, you may experience performance problems at that point. Make sure you give the database and HFM app servers a lot of memory to handle this.
    Since HFM 11.1.2.2 with its configurable dimensions, data can be spread across many more intersections. In your example you have seven custom dimensions, so I can understand how you might have a normal amount of data in each base entity (a few hundred to maybe a couple thousand), but balloon to hundreds of thousands when you get to the top entity. HFM can process a lot of data very quickly, but be careful if you have rules that cycle through all those intersections, such as allocations or maybe cash flow by product.
    But there is no hard limit in HFM.

  • MAS shows update due for OS X Server 3.1.1 even though it's installed

    I'm getting continual reminders that an update to Server 3.1.1 is needed even though it's already been installed and seems to run just fine on my Mac Mini. What can I do about it?

    MrHoffman wrote:
    Are you getting the notifications for the server, or for a copy of Server.app you're using to manage the server from a client? 
    Is Server.app always in the Applications folder?
    Any other copies of Server.app lurking around your disks?
    No notifications from Server, the app is always in Applications.
    I think it's the last item you mentioned, sir. I found old copies and have now deleted them. They were not on the startup drive. I can safely delete the other copies and have done so. We'll see if Updates recognizes that after a while. Do you think that I need to uninstall the old copies or will simply deleting the app be enough?
    H

  • How to set the filter on a report to show the data for the Current Month

    Hi all,
    I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
    Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
    Any help would be greatly appreciated!
    Thanks,
    AA

    You need to add a session variable to date fir worked assuming that this is a date field.
    To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

  • How to make zero value deliveries not relevant for billing

    Hi,
    I have a requirement to not print invoices that have zero as their net value. Right now there is a sales order line category that can have amount on it sometimes and sometimes not. When the amount is 0, is there a way make it not due for billing?
    In Item Categories Maintenace I set the Billing Relevant to H:
    "H: Delivery-related billing - no zero quantities
    You can use this category to avoid items with a value of zero being included in the billing document."
    Testing it still includes the items with 0 value for this item category in VF04 - billing due list and creates an invoice for it.
    Thanks,
    Sergiy

    Hello
    we will have the copy control routines in the copy control requirements between delivery and billing, check out the transaction VOFM , for example you  can have a new copy control routine no 901 in VOFM.  via which  SAP creates a new program LV60A901 and you can have your code there. Get in touch with your programmer he/she should be knowing how to create this and how to include this in the main program..
    Let me know if you need more information
    Regards

  • List of Sales Orders ready for billing

    Hi
    I was wondering if there is any FM /BAPI which will give me all the sales orders due for billing. Just like the output we get in VF04. I tried an FM..RV_INVOICE*, but it was not working.
    Please help.
    Thanks in anticipation
    Cheers
    /Arun

    i think if the sales order is order-relavant billing, then  it will appear in Vf04 Billing due list.
    if not updated they might be a problem in Billing Index needs to run a program SDVBUK00 note: 301254/128947
    before this check the table: VKDFC table wether SD index billing indiator sales order is upadting or not..  this i have done in one of my  project.
    like points .........please

  • Report generating two rows for the very first record

    Hi ,
    I have designed a simple RTF template using Table Wizard in MS Words.When I am trying to view the report in excel , the report shows two entries for first record.The problem is with first record only and other entries displyed are fine.When I tried deleting the first record , the next record is showing two rows.
    Am I missing something here ?
    Please advice.
    Thanks!!

    Hi ,
    I got this sorted out.The pbm was with my XML as My Rowset and Row had the same name.I changeed the rowset name and it worksfine now.
    Thanks Vetsrini!!

  • Need a report that shows sales shipments and billing by date

    We need a report that will show sales shipment and billing information by date.  Specifically, we need to find orders that were shipped in one month/period, but were not invoiced until the next month/period.  Does a standard report exist?

    I dont think it is possible. You will have to customize.
    For list of deliveries, you can use VL06O.
    For billing due list, you can use VF04.
    Regards,
    GSL.

  • Is there a report showing all the DDL objects for one APP?

    Hi,
    Is there a report showing all the DDL objects for one APP?
    I need to move an app to my workspace. The workspace I need to move it from has approx 20 applications in it, thus all the tables, procedures, etc are too many.
    What way is the easiest?
    I've looked at exporting the DDL and the app. and look to see what the app needs. But it has many pages.
    Thank you, BillC

    Hello Bill,
    You might find the report in the following location to be helpful:
    Home>Application Builder>Application XXX>Application Reports>Shared Components>Application Database Object Dependencies
    Regards,
    Arie.

Maybe you are looking for

  • CS 5.5 Install fails with package created by Adobe Application Manager

    Hi all: I'm trying to install Adobe CS 5.5 on a 10.6.4 machine that already has CS 3 on it. I've created the package several times with the AAM, but when I go to install it on the client machine installer always throws errors (see logs below). I've t

  • Moving lightroom library onto new PC

    Hi there I have an extensive lightroom library on my laptop and have just bought a new PC operating Windows Vista as my laptop was out of hard disk. I have installed Lightroom 1.3 onto the new PC and now want to move my existing library in. I have ba

  • WebDynpro ABAP ALV table not refreshed

    Hi everyone, I've got a master table which displays a list of items. On lead selection a query is executed and the result is displayed in a table below the first table (like a master-detail pattern). This all works all right when the detail view is a

  • Removing items from overhead menu bar.

    i recently downloaded intego security which is a one year subscription. when the subscription expired, it only said renew subscription. there was no option to uninstall. so i used cleanmymac, which that failed, followed by appcleaner, which managed t

  • SQL Encapsulation In variable

    I think i am missing some thing . when i am doing some thing like this its working <cfset QueryA = "Select * from Test"> <cfquery name="ABC" datasource="ABC"> #QueryA# </cfquery> But how to Add where in IT . ?? <cfset QueryA = "Select * from Test whe