Report to Display Release Notes

How do we extract data that is displayed as long text in the Release notes scetion under each module or in other words where (table ) is it stored ??

ok but now in SE61 Document class is Release Notes
RELN and I know the Text keys as well ..I want to write a program to display the corresponding text provided in the release notes ... how do I go about it..

Similar Messages

Where are release notes for Crystal Reports 2011 SP10?

We've recently moved from Windows XP with an older release of Crystal to Windows 7 (64 bit) with Crystal Reports 2011. Where can you find what issues have been fixed? Despite finding a link with the text "Support and Feature Pack Release Notes" on the web page SAP Crystal Reports 2011 – SAP Help Portal Page, the document is for SP5. Where can you find issues known and fixed in each of the service packs (and known and not fixed)? I also looked at Analytics Knowledge Center and picked Crystal Reports and 2011 and the only release notes other than the initial release is for a FP3, which as near as I can tell is nowhere to be downloaded so I assume the SP1 replaced that...

Hi Eddie,
Release notes for SP10 are only available on the Service Market Place.
If you have an S-user ID, you may have a look at the document here.
-Abhilash

SQL Report Viewer Web Part Not displaying Report

I have just completed updating an old report using report builder 3.0. I have added it to SharePoint Designer but have not replaced the old report file.
Any help is greatly appreciated!!
All I did was export the old report from sharepoint designer to my desktop. Then opened it with Report Builder 3.0- made changes to the report and saved it with a different name (for safety in case i break things) and then upload it back to the same place where
the old report was located using SP Designer. I then went back to the site in sharepoint that is displaying the old report, and changed the URL path in the SQL report viewer to the new report.
Now the SQL Report Viewer web part isn't showing anything (blank)

Dear Form Moderator,
This question is already asked in sharepoint forum so please don't move this sharepoint forum. Here is link of thread:
https://social.technet.microsoft.com/Forums/en-US/3796da85-fbb4-4722-a5d0-724859f7d4ae/sql-report-viewer-web-part-not-displaying-report?forum=sharepointgeneralprevious
Here is the one more duplicate thread link in same forum. So either you can merge both OR delete one.
https://social.technet.microsoft.com/Forums/en-US/259d2586-ed4a-4f47-a808-877d4621d9f2/report-builder-30-sql-report-viewer-web-part-not-displaying-report-in-sharepoint?forum=sqlreportingservices
[SharePoint Forum Moderator]
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Unloding point it's not maintain r/3 side but in report it display

Hi Friends,
While in companycode 5000 for customer DOHH0006 unloading point is not maintained
in r/3 side but in report it display unloading point
customer unloding point
DOHH0006 Haldiram House 051 051
why plz give me solution.
Edited by: prasana devi on Jul 23, 2009 12:54 PM
Edited by: prasana devi on Jul 23, 2009 12:59 PM

Hi
check the text table for unloading point infoobject and you will know how this is displayed in report.
see how companycode 5000 for customer DOHH0006 are related to unloading point infoobject.
for which charecteris are related and how this is displayed.
Best Regards.

Crystal Report in InfoView is not displaying the parameter

Cheers All,
We have a Crystal Report which is connected to the BEx query. We also have parameters based on variables in BEx.
When we run the report directly from Crystal, everything is fine.
However, when we run the report from InfoView, when I click on the "..." button beside the parameter to make the selection, everything hangs up.
This (static) parameter is based on a variable which is based on a compounded characteristic 0ASSET_AFAB.
The compunding keys are :1) Company code 2) Asset 3) Sub-asset.
The user is providing the Company code in another parameter, but the user is not providing the Asset, nor the asset sub-number... so all the iterations of asset/sub-asset/depreciation area are displayed - and this works at BEx level, and it works when the report is run directly from the Crystal Reports, however this does not work when the report is run from the InfoView.
What would be the best course of action?
Regards,
Dmitriy

Hi Rajiv,
In OIM 9.1 we are using the stored procedure to get the values for all the fields.In the stored procedure we are using the cursor to store the list of values but in the BI Publisher we are using the SQL queries to retrieve the values for the fields in the report. In sql queries we are unable to handle the list of values for the fileds like User Groups and Resources provisioned/deprovisioned.
Please let me know the process even if we can get list of values for the fields using the SQL queries.

Crystal reports 2008 Fix Pack 2.4 Release Notes

It seems to be impossible to find any release notes for any of the fix packs. Can anyone point me to them?
Also if it's anyone from SAP reading this why are release notes not distributed in the downloads section or a link to them. It's a ridiculous situation not being able to find them, how are we meant to know if issues are fixed we raise or about fixes we should be installing and are not even aware of.

Filtering by Crystal Reports | Crystal Reports 2008, I see the items listed below. I cannot find any release notes.
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.4 - Click Once
ZIP
50.372
Windows
English
22.01.2010
Crystal Reports 2008
Hot Fix
Crystal Reports 2008 SP2 - Fix Pack 2.4
ZIP
254.688
Windows
English
22.01.2010
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.4 - Redist Install
ZIP
84.228
Windows
English
22.01.2010
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.4 - Merge Modules
ZIP
117.236
Windows
English
22.01.2010
Crystal Reports 2008
Other
Crystal Reports 2008 SP1 - Hungarian Language Pack
ZIP
13.008
Windows
English
04.01.2010
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.3 - Redist Install
ZIP
84.136
Windows
English
30.12.2009
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.3 - Click Once
ZIP
50.292
Windows
English
21.12.2009
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.3 - Merge Modules
ZIP
117.024
Windows
English
21.12.2009
Crystal Reports 2008
Hot Fix
Crystal Reports 2008 SP2 - Fix Pack 2.3
EXE
175.176
Windows
English
18.12.2009
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.2 - Merge Modules
ZIP
114.168
Windows
English
03.12.2009

2.1 firmware update listed signal strength display fix in its release notes

Summary to those who haven't read Apple's latest letter to iPhone 4 owners:
Apple is saying 'death grip' only affects the graphics of the signal strength not signal itself. Who accepts that? And will therefore fix this in the next firmware update.
But wait! This seems to be fixed in the 2.1 firmware update already!
See 2.1 firmware update changelogs.
Google it, I don't want to post direct link as Apple may start pulling that information down.
Message was edited by: Venomrush

Letter from Apple Regarding iPhone 4
(emphasis mine)
{quote}the formula we use to calculate how many bars of signal strength to display *is totally wrong.*{quote}
{quote}We will issue a free software update within a few weeks that incorporates the corrected formula. *Since this mistake has been present since the original iPhone*, this software update will also be available for the iPhone 3GS and iPhone 3G.{quote}
But the 2.1 firmware had in it's release notes as one of the improvements:
{quote}improved accuracy of the 3G signal strength display{quote}
So in 2.1 they improved the accuracy of a totally wrong formula?
Something is rotten in Denmark.

Trend micro rubotted reports malicious dns query when accessing and reading release note page for 3.6.7 update

Trend Micro RUBotted.exe reports the above. The recommended scan, Trend Micro House Call, completes in 2:40 minutes and does not find a bot on my system. I have done the above action twice, (reading and opening release note fixes) and both times the same identical warnings appeared. My system appears to be clean. However, the RUBotted.exe program is designed to flag bot-like behavior, and I think this finding is correct, and not a false-positive.
This only happens when this page is opened, and I therefore think there is an embedded link that cannot be seen, and is run when this page is opened.
I did update to version 3.6.7, but scanned the system before and after I updated to 3.6.7. Results are identical.
== This happened ==
Just once or twice
== I was looking at the latest fixes for Firefox 3.6.7

Trend Micro has a record of "false positives". Report the problem to them and let them investigate. Please post your results back in this thread for information for other users.

RELEASE NOTES R180 - scheduled for September 25th 2012

We are announcing a new Business Catalyst release, scheduled to go live on Tuesday, September 25th.
This release includes some great improvements to our module templates, new features for our email marketing system, admin interface improvements, a few infrastructure updates and lots of bug corrections.
Read through the following sections to get detailed information about this release:
Features and enhancements
Issues fixed by this release
You can jump to the corresponding section by clicking the above links.
Features and enhancements
Modules improvement
Starting with our September release, we have enabled users to use a html page or a static template as a module list template (layout) for all modules that are using templates today. The new addition allows partners to create different views for the same data for a personalize experience. To use this new functionality, just create a new module template and update your module properties by specifying the template to use.
Ex: {module_blogsitepost,2 template="/ModuleTemplates/Custom/MyTemplate.tpl"}
Note: although you can use any extension you feel comfortable with, we recommend using a .tpl extension for two reasons: help locate the template better and avoid having these templates being displayed in Page list.
Email marketing application improvements
This is release is packed with new features and enhancements to our email marketing system.
Dynamic modules in email campaign - you can include modules (a subset of 19 modules) in the Email Campaigns content; the system will render these modules right before the campaign is sent, making sure your customers always receive the latest content;
Fresh, new email templates - the release includes a set of new of new email templates that look much better; along with these new templates, the template selection page was re-done to show better thumbnails;
Improved recipients selection - we have improved the recipients wizard step, replacing the checkbox list with a smart search and select control; additionally, with this release you will be able to select multiple lists (including Customer Reports) to exclude from your campaign.
Improved campaign status screen - before sending the campaign, you will now be able to view the exact number of recipients before sending the campaign (Note: reports and list requiring a long time to compute will be approximated); additionally, while the campaign is sending, we are displaying a meaningful status, that indicates that the campaign is being sent.
Email clients reporting - the campaign report screen has also been improved to include a report showing you the email clients used to read your campaigns.
Admin console improvements
We have updated our new admin user interface and replaced the insert module and insert tag panels with the new Business Catalyst toolbox almost everywhere. With the new toolbox we'll make it easier for partners and business owners to insert and customize module or tags into pages, templates or system emails. The toolbox user interface will opened by default for partners for faster access to tags and modules.
Other changes
Some FTP improvements (better error codes, performance, etc) and SFTP support
DNS improvements (support for setting up Google Apps email out of the box, several bug fixes)
When you change your email address on adobe.com, it syncs automatically with BC
Various improvements of the caching engine for static assets
Issues fixed by May release
Issue 2869695 - Fixed an issue that broke the comments submitted by visitors by placing <br> tags after a random number of characters;
Issue 3317538 -     Fixed an issue preventing the social media modules from being reinitialized after pressing "Add to cart"
Issue 3317105 -     Files with spaces in the name do not get invalidated properly on FTP/API delete
Issue 3317478 -     Fixed an issue causing hardcoded http paths to generate security alerts when on https
Issue 2567045 -     Fixed an issue with Product Purchased with Details data field
Issue 2567131 -     Fixed an issue causing web app creation forms to generate [No Name] duplicates
Issue 3319245 -     Fixed the search function on Help & Support
Issue 3320623 -     Fixed an issue causing decimal prices to be incorrectly saved when editing/creating an order in admin and having the site admin language set to a country language that uses "," as decimal separator instead of "."
Issue 3325526 -     Fixed an issue causing the CRM Session verification to fail for session IDs that contain +
Issue 3162093 - Fixed a problem [AdminV4] HTML files for campaigns can't be edited
Issue 3009528 -     Updated multiline fields to allow line breaks
Issue 3010606 -     Changed FTP blog layouts listing to properly handle cases of invalid layout group names
Issue 3315646 -     Fixed an issue causing {tag_blogcategorylist}to not limit the number of results as set
Issue 3316323 -     Small bug/improvement at offline payments on copy/pasting the PDF password
Issue 2900590 -     Fixed an issue causing a correct web app item address to change to another one on some sites
Issue 3319299 -     Fixed some performance problems causing Edit Web Apps Settings -> Autoresponder interface to freeze
Issue 3320422 -     "Free shipping" not validated when enforcing shipping validation
Issue 2918069 -     Cannot save values properly for webapp items when the custom field uses comma separated checkbox list, and it has more then 265 characters for the list of values
Issue 2925458 -     Web App edit form is adding "X_" to the existing classes inside the description field. Every edit will add another x_ ending up in something like class="x_x_x_classname"
Issue 2567035 -     Can not list files in FTP when there are invalid characters or similar in the directory
Issue 3313655 -     Import fails if the username column values are already in the CRM
Issue 3315485 -     Varnish cache is not invalidated when overwriting files with %20 in the path
Issue 3315372 -     When adding a new item in the admin the address fields is pre-populated
Known issues and limitations
Product list layout outputs the products using an unordered list, requiring CSS for better formatting
Favorites module does not support multiple templates (layouts)
Module detail views do not support multiple templates (layouts)
Recursive modules are not supported in email campaign preview
Dreamweaver design view, ignores the custom template and always renders the tags from the default template (layout)
For more information about this, follow the release announcement on the Business Catalyst blog: Introducing our feature packed September release!

Thanks Mario, what is missing from the post and this notification is a fundamental pieces of information "TIMES". This is not just your info but also the release by Jackson Palmer on the blog - totally missed there also
We need to be notified of the sceduled timing of this release not just a vague date which is not specific globally
25th but we are global - what time specifically 0100am PST is very different to 1030pm PST , the latter being 26th in AU
Why - because campaigns scheduled for around this time can be impacted, and also if the sites go offile during the maintenance window campaigns can be a wasted exercise.
Previously mid week schedules have been a matter of heated discussion, yet the support guys say that schedule ahas not been decided upon
Not planning is planning to fail, and we have witnessed that all to ofetn in the past. BC unfortunately has a history of failing to plan and inform, and this does little to activate confidence in the community.
I have discussed with Dragos on numerous occassion how the missing ingridents at BC like communication, UX, planning and most importantly understanding from the customer perspective (rather than backroom coders).
eg at 645am 26th of Sept 2012 we have a email campaign scheduled ( and can be rescheduled ), the issue I see is without your maintenance window timings being published in a timely manner how can we tell if we move to a sooner or later timing. You have to agree it is disasterious marketing to blast out a campaign and find systems down when customers open newsletter offers and want to shop then.
If the time schedule is listed somewhere else even more shame that it is overlooked as an inclusion here plus that Chat team are not informed and kept up to date and the blog is just fluff sales and chest beating. That is not support of partners regargless of paid or free status.
To much time is wasted with this sort of unthinking about unpublished / incomplete notifications, Live chat guy wasted > 15 min of his and my time becuase they don't know either, how many others are being inconvenienced by fialing to plan and notify information to act upon, this communication in the blog is good info but by itself useless and creates more doubt and lack or faith. Just look at the "hope in the comments"

Report is displaying but without record

hi all
i am using 10g Release 2.Report is displaying in PDF but
without records.is there anything incorrect in web.show_document?
declare
     rep report_object;
     vcJobid varchar2(100);
     vcURL varchar2(100);
     pl_id paramlist;
ipaddress      report_server_name.V_IP%TYPE;
     vc_server    report_server_name.server_name%type;
     report_path_name report_server_name.report_path%type;
     PORT_NO           report_server_name.port%type;
begin
select server_name,report_path,v_ip,port into vc_server,report_path_name,ipaddress,port_no from report_server_name;
     pl_id := get_parameter_list('temp');
     if not id_null(pl_id) then
          destroy_parameter_list(pl_id);
     end if;
     pl_id := create_parameter_list('temp');
     Add_parameter(pl_id,'p_num',text_parameter,to_char(:block.num));
Add_parameter(pl_id, 'PARAMFORM', TEXT_parameter, 'NO');
rep := Find_Report_object('REPORT6');
SET_REPORT_OBJECT_PROPERTY(REP,REPORT_FILENAME,report_path_name);
    SET_REPORT_OBJECT_PROPERTY(rep,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(REP,REPORT_SERVER,vc_server);
SET_REPORT_OBJECT_PROPERTY(rep,REPORT_DESFORMAT,'PDF');
--SET_REPORT_OBJECT_PROPERTY(REP,REPORT_OTHER,
VCJOBID := RUN_REPORT_OBJECT(REP);
VCJOBID := SUBSTR(VCJOBID,LENGTH(VC_SERVER) +2,LENGTH(VCJOBID));
VCURL := 'http://'||ipaddress||':'||port_no||'/reports/rwservlet/getjobid' || VCJOBID || '?server='||VC_SERVER;
WEB.SHOW_DOCUMENT(VCURL,'_blank');
END;

hi
now try.....
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
ipaddress      report_server_name.V_IP%TYPE;
     PORT_NO           report_server_name.port%type;
     vc_server    report_server_name.server_name%type;
     report_path_name report_server_name.report_path%type;
BEGIN
     select v_ip,port,server_name,report_path into ipaddress,port_no,vc_server,report_path_name from report_server_name;
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
Add_parameter(plid,'p_num',text_parameter,to_char(:Block.num));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT6');
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_FILENAME,report_path_name);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_DESNAME,'report_name');--enter your report name.
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'NORMAL');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
--SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_OTHER,'P_NUM='||TO_CHAR(:Block.NUM));
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://'||ipaddress||':'||port_no||'/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||vc_server||'&paramform=no','_BLANK');
END;hope this helps you..
sarah

Crystal Reports 2008 - dynamic parameters not returing all data

I am having the same issue with Crystal Reports 2008. Only returning 135 customers in a dynamic paramaters when the list should be 3288.
When I re-create the parameter by using a command instead of relying on Crystal to return the data from the db table Crystal returns only 5"pages" of customers to select from.
I have tried to run the report with this reduced selection & it then crashes.
Any ideas??

This article may help you to increase the number of values in the parameter
KBase Article ID:c2017238
Article refers to: Crystal Reports XI BusinessObjects Enterprise XI
Symptom
For performance reasons, in Crystal Reports XI Release 1 and Release 2 the maximum number of values that are returned for a list of values is set to 1000. If you have a cascading List of Values (for example Country > Region > City), the lowest level (in this case City) will only display a maximum of 1000 values. This means that the higher-level prompts may display far fewer values than you expect. The list of values provides the data for the dynamic parameter list.
How can you modify the maximum number of values available in a dynamic parameter list?
Resolution
To increase the maximum number of values available in a dynamic parameter list, you must add a registry key.
CAUTION     The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe).
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
Crystal Reports XI Release 1
1.     Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV.
NOTE     Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV key.
2.     Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter. NOTE: The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
NOTE     The higher the number of values is, the longer it will take the Enter Values dialog box to populate with values.
3.      After making changes to the registry, restart the affected service or application as required.
Crystal Reports XI Release 2
1.     Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV.
NOTE     Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV key.
2.     Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter.
NOTE     The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
3.     After making changes to the registry, restart the affected service or application as required.
Regards,
Raghavendra

Release notes for Smartforms 4.7

Dear Friends,
If anybody can provide release notes on Smartforms for SAP 4.7
Thanks in Advance.........
Message was edited by:
Ashish Kansara

Hi
Refer this link for ECC 5.0 & 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
<b>You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm</b>
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
check this linkls------>
https://www.sdn.sap.com/irj/sdn/collaboration
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Reward points for useful Answers
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Release Notes: July 15, 2015

We found a few bugs in some code that were causing areas of the community to be slow at updating themselves; hopefully today's release should fix that!
https://community.spiceworks.com/field-guide/release-notes

After purchasing the rights to use the Commodore logo and branding, two Italian entrepreneurs are preparing to release a new Commodore PET. But where the iconic Commodore PET of the late 1970s was a personal computer, the new Commodore PET is catching up with the times and features "a customized version of Android 5.0 Lollipop, a 5.5-inch 1080p IPS display, and a pair of emulators for running old Commodore software." In other words, the new Commodore PET is a smartphone.According to Ars Technica, the PET is "powered by some respectable hardware, [which includes] ... a sturdy slab of Gorilla Glass 3, a 1.7GHz Mediatek 64-bit octa-core processor with ARM Mali T760 GPU, 3GB of RAM, and a large 3000mAh battery." There's also a 13-megapixel Sony camera, a front-facing 8-megapixel camera, and dual-SIM 4G connectivity. Ars Technica reports...

Purchase Requisition Item release not in the change log of the item

Hello Experts,
I have developed a report that displays when purchase requistions have been relesased. To do that, I have used the change table to track the time and date.
However, a lot of the requistions do not have the release as a change. I am not able to recreate it, and I am not able to point at anything special with the ones that does not have a change log.
Have anybody else experienced this? I am a bit stuck
rgds
GAR

has there been a change in the release strategy cusotmizing. maybe the PR was not subject to a release as it was created, but new PRs of the same kind are subject because of this change in customizing?
There are not many possibilities:
a) PR was not subject to release strategy
b) release indicator got cleared by own program or table maintenance
c) program bug (never saw one for change history of PRs)
do you use workflow for releasing? if yes then you can check the log of the workflow item and proof the evidence for a program bug.

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Report to Display Release Notes

Similar Messages

Maybe you are looking for