Unloding point it's not maintain r/3 side but in report it display

Hi Friends,
While in companycode 5000 for customer DOHH0006 unloading point is not maintained
in r/3 side but in report it display unloading point
customer unloding point
DOHH0006 Haldiram House 051 051
why plz give me solution.
Edited by: prasana devi on Jul 23, 2009 12:54 PM
Edited by: prasana devi on Jul 23, 2009 12:59 PM

Hi
check the text table for unloading point infoobject and you will know how this is displayed in report.
see how companycode 5000 for customer DOHH0006 are related to unloading point infoobject.
for which charecteris are related and how this is displayed.
Best Regards.

Similar Messages

Missing points, transaction was not recorded on my account but another.

My father recently went in to buy a new HDTV and was assured by the represenative at the store that the points for the tv would be added to my account, the account we both do our shopping on. I do believe he in fact did purchase the HDTV with the Best Buy credit card. Now I told him before he left that we probably wouldn't get the points since he was using the credit card. We had not received points for the last computer we purchased because it was done on said card and if I'm not mistaken, a representive on this board said that you aren't awarded Reward Points when you do transactions that way.
He said he would ask when buying the TV and he was definitely told we would still get the points for the HDTV regardless of whether or not we would used the credit card.
I checked our account and nothing has shown up on the transaction log. I tried Reporting Missing Points and it said it was logged on another account. The Member ID on the receipt for the HDTV is not the one we use and I don't know how I would access said account.
I really hate to be bother if the policy is in fact that you cannot get points from Best Buy Credit Card purchases but this is the second time an in-store represenative has told my father otherwise. If the points were awarded and put on another account, I'd like to figure out a way to be able to get access some way. Thank you.

Good evening ReuleHL,
Before we get into the matter at hand, I do want to point out that a My Best Buy™ account is intended to be used by a single member and that program benefits cannot be transferred to other members. With that being said, I would strongly suggest that you and your father use separate accounts for your own purchases. That should help prevent any potential problems with either of your accounts.
A program member can earn points when using their Best Buy credit card or My Best Buy™ MasterCard; however, a purchase that is applied to a promotional financing offer would not qualify for points. So, if your father selected a promotional financing offer when purchasing his TV, then he would not receive points (base and bonus). This is a change to the My Best Buy™ Program Term that went into effect back in July 2013.
I am going to send you a private message so that I can go over your My Best Buy™ account with you and see if I can help answer any additional questions you may have. To check your private messages, you would want to login to the forum and click on the yellow envelope icon located at the top of the page.
My Best Buy™ program points and promotional financing - FAQ
Thank you for connecting with us on the forum!
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Business service is not working in sender side but business system is working soap to idoc but why like that

i have scenario SOAP to IDOC
when i'm using business service in sender side it is getting an error as follows
sender message can not convert to ALE Logical system
in this i'm using altova spy as testing tool
my sender interface is asynchronous
but when i'm using business system everything is working fine
In sender side i'm using soap adapter,i checked the logical system everything is fine
mainly the problem is why it is working when i'm using business system rather than business service
my pi version is pi 7.0
thanks in advance
regards
satish

Hi Satish,
You are sending IDOC's to SAP system right. we should create Business system not business service.
so we should create the business system as web AS ABAP in SLD and import the same in ID.
When we create the business system in SLD the logical system name is assigned for the business system. like SAPCLNT100...It plays a key role in IDOC scenarios.
sender message can not convert to ALE Logical system
Reasons for this issue is
1) logical system name is unable to read from SLD for that corresponding business system.
Goto business system click on Adapter specific identifiers from the menu --> read from SLD.
it will automatically fetch the logical system name from the SLD.
2) Sometimes the logical system name will be deleted from the business system in SLD.
Delete the business system and re-create it, and follow the above procedure.it will resolve your issue.
Regards
Bhargava Krishna

Printer suddenly "not connected" according to computer, but configuration report says "connected"

Our computer has always worked fine on our wireless network. Suddenly, though, we are unable to print. The status of the computer shows as Idle, with a green light, in System Preferences (Mac OSX). However, when I try to print something, I get the status "The Printer is Not Connected". We printed a HP Network Configuration Page from the printer; it states that it is connected to our Wi-fi network. We have tried unplugging it and then plugging it back in and restarting.
Any other ideas?

Hi @W1984,
Welcome to the HP Forums!
For further assistance, I will need to know some further information:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
The version of Mac OS X you are using. To find the exact version, visit this link. Whatsmyos.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Internet not working on Mac side, but works with Parallel Desktop

I recently uninstalled Parallel desktop and noticed my internet on my mac stopped working, the diag said internet and server failed with red lights
I then reinstalled Parallel, and the internet works, but only with windows
I have a macbook pro '13 10.6.8
Any suggestions?? This is driving my crazy !!
Thanx

Yeah... good post & kinda unApplelike in it's obscurity!

Drill down is not working for Pivot tables,but working for chart

I have two reports and trying to navigate betwen summary report to detail report. But details report is displaying all the records .The filter condition is not working and displaying all the filters .I have Case statement in my filter.But the summary report column where the filter condition is applied is aggregated in the RPD level. Does this might be the reason ?. Is it passing different type of data type to details report ?. The filter condition is not working for Pivot table .But Chart is working fine and displaying the only selected records based on the filter condition.
Please help me with the below issue.

Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

OVL2 Is showing not maintained shipping point determination even i have maintained

Dear SD Experts ,
It seems Basic question but i have maintained all settings properly but still issue is same please let me know
Issue is while creating sales order in VA01
And i have properly maintained In OVL2
But when i have checked in OVL2 That information is not Populating, but when trying to Maintain New one again but system is showing all ready Maintained
Here showing Like not maintained even i have maintained
CMR, And VOV8 Also same Maintained
MMR
Finally assigning plant to shipping point
So tell me why OVL2 Is showing not maintained shipping point determination even i have maintained
Even Not Maintained OVL2 Shipping point details combination for plant system is showing
Any entry is maintained all ready ,,
Side Note : Recently Installed Ides and Doing testing on this so some time First time this problem is coming ?

Dear Venu Gopal,
Here while creating configuration in you IDES system , you taken existing 1000 as company code and under that you created your plant and shipping point . sometimes while creating or assignment of plant, sales origination ,distribution channel, shipping point you taken reference and created your own plant, sales origination, shipping point at that time shipping point determination also taken as a copy and created . so you got this type of error . these type of errors will occur usually while copying .
so kindly select the particular line item and delete then save ,after saving then you create your own then only system will accept other wise it will show this error .
see the below screen shot .
Regards,
C.B Reddy.

HP Officejet 6500A Plus will not maintain wireless connection reliably

For the HP EXPERTS on Expert Day, April 18, 2012:
B.L.A.T. (Bottom Line At Top): We have an HP Officejet 6500A Plus purchased about 5 months ago. We wanted to use it as a wireless-connected printer in another room besides our home office. It is useless to us because it will not maintain its wireless connection, even sitting just a few feet from the router in the same room. Except for numerous hours of troubleshooting, we have left it sitting powered up, but unused and idle, for almost the entire 5 months in our home office. DURING ALL THAT IDLE TIME, IT HAS LOGGED OVER 3,200 DISCONNECTS, at a consistent rate of 24 disconnects every 24 hours, even though it ALWAYS reports that the wireless signal quality is “EXCELLENT” (all this is according to the Wireless Network Test Reports we’ve printed throughout the last 5 months). So our question is, what is it that this printer is trying to do once an hour over a wireless connection that is causing these thousands of disconnects? And how can we stop it?
NOTE! Before you round up the usual suspects (namely our router and our PC firewalls) please note that we also bought an HP Officejet Pro 8600 Plus ON THE SAME DAY as the Officejet 6500A Plus. The 8600 was also installed with a wireless connection, and has worked without a single network issue for the entire 5 months.
NOW, FOR THE REST OF THE STORY…
WHO WE ARE: My wife and I have worked on HP equipment for 33 years, starting in 1979 as corporate customers of HP when we worked for Exxon; then we both worked for HP directly for 17 years; and we’ve now used dozens of pieces of HP equipment in our home during the last 12 years in retirement. We’re primarily software folks, so we’re not exactly experts in hardware and networking, but on the other hand, this ain’t our first rodeo either.
OUR CONFIGURATION:
PC’s – All running Windows 7 x64 with all important patches applied and Norton Internet Security 2012: HPE-270f and HP AIO 200-Quad, each with full 6500A and 8600A drivers installed on wireless connection. These 2 PC’s themselves can connect either wirelessly or via Ethernet to our home network. The 270f has a dual-band wireless board. Both bands work. We also have a new dv7t laptop with only the full 6500A driver installed via wireless connection. The laptop is now upstairs and it’s connected to our home network wirelessly without any issues. (This is where we had hoped to also put the 6500A, but it needs to work reliably via wireless connection.)
ROUTER: Netgear N600 WNDR3700 providing Ethernet and wireless networking. Router provides a very strong wireless signal throughout the house. No wireless problems with any other equipment including an iPod, two Kindle Fires besides all the HP equipment.
PRINTERS: Besides the two HP printers, the HPE-270f PC has a Canon MP960 installed on it. And if we can’t get the 6500A working right or replaced with something that does work right, we may be buying our second Canon printer. By the way, on the 6500A, ePrint and App’s are set to ON, but of course they’re not being used, just like everything else on this AIO.
OTHER: We also have a Sonos music system that connects to our network via Ethernet and has its own proprietary mesh network (on another frequency) for transmitting ripped music wirelessly to speaker units throughout our house. (If you aren’t familiar with this totally cool system, check out sonos.com). We’ve never seen any evidence of interference between these two wireless networks, or our wireless phone sets either.
HP TOOLS AVAILABLE ON ALL 3 PC’s: HPU
UPDATE 5.003.001.001 (reporting everything up-to-date); HPHDU 3.1.0.17; HPPDU 5.0.0.015 and HPNDU 4.3.0.002.
SYMPTOMS: The 6500A Plus installs quickly and easliy, and connects wirelessly just fine during installation. But sometime over the next hour (usually less), it disconnects and won’t print from PC applications. Sometimes the application puts up an “Unable to communicate with printer” screen, even though the PC usually thinks the printer is “ready”. Other times, the PC thinks the printer is offline (but printers don’t have “offline” buttons anymore!). Often, if you just leave everything alone, the 6500A will somehow reconnect and print out the spooled file 5-30 MINUTES later. So it does usually seem to be able to recover given some time, but that doesn’t always fit our schedule! Occasionally, turning the wireless radio on the printer off and back on will fix it right away. But usually, you have to power the printer completely off, and then back on. As far as we know, that always fixes it…..until the next disconnect a few minutes later!
PREVIOUSLY TRIED: After reading some of HP’s wireless network support websites, I manually assigned a fixed IP address to this printer. It didn’t seem to matter; according to the wireless network test report, it still logs disconnects at the rate of one per hour, and all the failure symptoms were the same.
We also dabbled a bit with setting this printer as “trusted” to the Firewall, but that didn’t seem to matter either.
Next, we connected the printer via Ethernet. The printer immediately started to work, even though it had just been in its “failed” state over the wireless connection. As far as we know, it never failed while connected via Ethernet. This seems to point to a purely wireless hardware/firmware problem on the printer itself.
Late last year, I tried two different chat sessions about this with the inter-continental AIO support teams, each one lasting several hours. Unfortunately, none of their optimistic solution scripts seemed to fit our problem. They both seemed determined to reconfigure the 6500A as a TCP/IP printer, which of course worked fine initially, just like everything else. At this point, they would understandably want to close the chat. But 20-30 minutes later, we could no longer print to it. During the second chat, they got into one of our PC’s remotely and effectively turned off the spooler (by selecting “Print Directly” or something like that). After that, all was well again (as usual) UNTIL the printer disconnected, at which time attempting to print from that PC would HANG the application (since the spooler was no longer buffering) and eventually hang the whole PC. One giant leap backwards. That’s when I gave up on the multi-hour chat sessions.
The three diagnostic utilities (HDU, PDU, NDU) have been tried over and over. When the printer is in its disconnected state, the DU’s usually don’t detect the 6500A at all, or if they do detect it, they are unable to fix anything. Frankly, it’s easier to just power the printer off (which takes about a minute) and power the printer back on (which takes more than a minute) and then wait for the spooler to kick in (usually about 30 seconds). BUT WE DON’T CONSIDER THAT A SOLUTION!!
B.L.A.B. (Bottom Line At Bottom): We have used up nearly the entire black ink cartridge and at least a ream of paper troubleshooting this brand new printer, to no avail. This printer is useless to us unless it can maintain a wireless connection reliably. Please help!
Thanks –
Bob and Jane
(Note: we have an appointment from about 11:20 am EDT – 1 pm EDT, 8:20 am PDT till about 10 am PDT)

I bought the Officejet 6500A Plus about one month and have experienced the very same problem. I tried to remedy this problem following suggestions in a number of different posts (static IP, router, firewalls etc), all to no avail. Last week I called support. The support I received by the tech over several hours and different days for a week was very good. However none of his suggestions corrected the connection issue. After today's recommended fix failed, he advised HP is aware of this issue with the 6500 and other affected printers. He claimed HP was working on a firmware upgrade. He did not know when the update would be provided. The tech also claimed HP acknowledged this problem in a written announcement. He agreed to email the announcement to me. I haven't received it. This has been the only problem I've had with the 6500

Is there a way to avoid having a content library on a site server when the Distribution Point role is not installed on that server (disk cost issue)?

Hello,
I don't think it is possible, but my goal is to start a discussion about content libraries and maybe suggest something for a future release or version of Configuration Manager.
Actually, based on Configuration Manager Technet documentation, Configuration Manager creates a content library on each site server and on each distribution point.
Often, when designing the architecture, people will offload the distribution point role from the site server to an external server (and add the role to other servers too for redundancy). They could also do the same for the Management Point role, but this
is not related to content library. The idea is to save the site server from having to deal with clients for software distribution (applications, software updates, OS, etc.), this is especially true for organizations having a large number of clients and/or
primary site servers involved in a hierarchy. Doing so will allow more resources on the site server to deal with the database and also replication in the case of a hierarchy.
When doing that, you still have to maintain a content library on the site server and the thing is this library will usually become huge, especially for organizations having more than 1000 applications (add also OS images to this). Will the content library
on the site server become as huge as the one for a distribution point having a copy of all content? I guess the answer is yes.
I know that Pull distribution points will help offloading the task from the site server to distribute content to distribution points, but, correct me if I'm wrong, you still have to maintain a content library on the site server when using them, and they
will not make the content library smaller on the site server. Also, I don't like the fact that you lose the rate limits feature with Pull DPs, but this is another story.
Storage cost is high and in this scenario, it hurts to have to pay this cost for a content library not used by the clients, but only to distribute content to DPs.
Correct me if I'm wrong, but the key component here is Distribution Manager on the site server; this is the one which has to maintain a content library to do its job.
It would be nice if we could have a way to elect a specific distribution point (not on the site server) as the Distribution Manager for a site, that main DP would hold a copy of all content by default, but would be used to distribute content to other DPs
and avoid the content library on the site server. Said differently, the Distribution Manager component would become a site system role that could be transferred outside the site server.
Tnx for comments, answers or suggestions.
Patrick

There is no way to avoid that the contentlib will be placed on the site server.
I don‘t agree that storage cost is high. It might be true for fast storage, but that‘s not needed for it.
Torsten Meringer | http://www.mssccmfaq.de

Item category determination customizing not maintained error in CRM_IC

Hello Solution Manager Gurus
I have configured IC Web Client.. But in service ticket tab i am getting Item category customizing not maintained error. Similarly i dont know where to create SLA information for service ticket in solman system.
Please help me
regards
Naveen

Sure Naveen
I think you have my email id with you
And for the customization guide of Webclient, it is available on http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
C78: CRM Interaction Center (WebClient)
Hope this will help
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

Assessable value not maintained for the material X

Dear all,
i have maintained material chapter ID,Plant and materialchapter id combination ,assessable value , cenvat determination, and vendor excise details in the transaction J1ID .
Even after maintaining all these conditions , i am not able to save the po,while saving the po i got a error message that assessable value not maintained for the material X..
Points will be rewarded for useful suggestions.
Thanks in Advance.
velu+91-9789991357

Hi,
Search using approriate keywords in SDN, u get most of the details, i have now done the same searched and have pasted below .
Try ME2N.
Click on the "dynamic selections" icon and add the release indicator as an additional selection. Enter the release indicators that you class as "awaiting approval" and you will then have your list.
The ME2* series of transactions are not that much use prior to 4.7, the layout is poor. But if you have 4.7 or later you can get the screen to use the ALV format and this transforms the ME2* (i.e. ME2L, ME2M, ME2N etc.) transactions into VERY useful reports.

Re: credit limit has not maintained

Dear Experts,
I have a problem when i am creating sales order i gave all the inputs order type, s.ord,d.chan,div and entered later it came to create cons fill-up screen i gave sold-to-party,ship-to-party & material qty later i saved the document then the system is saying creation of xx is prohibited due to credit limit has been not maintained. So if anybody face the same problem give me ur value inputs to sort of this issue.
awaiting for your golden replies & points will be assign for the useful answers.
thanks in advance,
kk.

Hi,
Go to VOV8 and give "No Credit Check" in the check credit limit box.
Also check whether you have maintained credit management
Regards
Ashis.

SAP BW DTP error: Fiscal year variant is not maintained for calendar year

Hi experts,
Running DTP for loading 2LIS_12_VCITM results in following error "Fiscal year variant A2 is not maintained for calendar year 2012".
I have already done following checks:
- the fiscal variant A2 exists for the fiscal year 2012 in the BW system (T009 tables)
- the DTP does only give this error for 2 company codes, and works fine for other company codes
- in our R3 system, the fiscal year variant A2 is assigned to all the company codes, how or where can I check this assignment in the BW system ?
Kind regards, Guy Verschueren

Hi
Please check the following threads
"Fiscal year variant V3 is not maintained for calendar year 2011" (OAOB)
Error FGV002: Fiscal year variant & is not maintained for calendar year &
Hope it helps.
Thanks,
Rajesh.
Please assign points to answers if you find them heplful

G/L Account not maintained.

hai, Can any one tell me how to handle the error G/L account not maintained when Sale order is rised in va01.
with regards
Anuradha

Hi,
I feel that this material and order is make to order scenario.
Kindly check that first?
If yes then check the requirement type which is determined? Assign correct requirement type.
Secondly also check whether you have maintained profit center in your new material.
Hope this solves your problem.
Reward points if it is helpful.
Rgds
VIVEK.

Measuring point/document is not updating

Dear all,
I am new in PM. I have one issue over here.Measuring point/document is not updating automatically after production order confirmation via co11n . I tried with following steps
1) Created the equipment as (P)Production resources/tools -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
2) Then i have assigned this equipment as a PRT in the routing of material .
3) Production order confirmation via co11n Each unit
Which steps i am missing. if u give me steps by steps procedure to me for counter based maintenance, its helpful for me.
STILL not answered and no reply.
I am waiting for reply.
Thanks
tarun
Edited by: tarun on Oct 5, 2010 5:06 PM

Hello,
Have look this thread [Re: Auto Update of measuring point/document;
Regards,
Rakesh

Unloding point it's not maintain r/3 side but in report it display

Similar Messages

Maybe you are looking for