Report Writer Reports

Hello Experts,
Our Business Analysts want to include some of the 'Report Writer Reports' into the 'Reporting Tree' of SAP Standard Menu.
For eg into the following path: Accounting->Controlling->Product Cost Controlling->Cost Object Controlling->Product Cost by Order->Information System->Reports for Product Cost by Order.
I have no clue of how to do that. Can anybody please help me. We are using 46c.
Thanks a lot.

Thanks Much Janardhan for your response. The only thing which is different is: It is: KKSM.
Thanks again.

Similar Messages

How to write text on the selection screen of a report

Hi all,
I need to write some user defined text on the selection screen of an ALV GRID Report.
Please suggest me how can i do this
Thanks
Ajay.

SELECTION-SCREEN BEGIN OF LINE .
SELECTION-SCREEN COMMENT 12(31) text-024.<-----Goto text elements and add text.
PARAMETERS:P_FILEN LIKE RLGRAP-FILENAME .
SELECTION-SCREEN END OF LINE

Report painter/writer for actual cost component split

Hello Gurus,
Any of you guys ever explored possibility of creating a report using report painter or writer that can give both Standard and Actual cost component splits in one report? Is it even possible without custom ABAP involvement?
Thanks
RG

Hi Raghu,
After your reply, I am getting a doubt..
Have you Activated Material Ledger? When you say Actual Cost Component Split, are you talking about it what you get in Actual Costing/Material Ledger?
If yes, then you can map your cost compnents for Actual Costing in the path SPROControllingProfitability AnalysisMaster Data Valuation--Setup Valuation using Material Cost Estimate -- Define Access to Actual Costing / Material Ledger
Further, there are no standard reports available in COPA. Try to build a report comprising two columns, 1st column with the value fields which are mapped for Standard Cost Components and 2nd column with the Value Fields which you have assined for Actual Costing under the above path.
You will be able to get the comparison...
Pls don't hesitate to call me for further assistance....
Srikanth Munnaluri

Stock Write-off Report

Dear Friends,
Is there a transaction or Report available to see the write-off stock by plant or through any movement types ? Please suggest
the requirement is as fallows:
Report needs to be selectable by IPC or ICC. Or plant
The report will need to show the stock that has been written off in Quantity of the item, the cost of this stock. And where the stock was written off.
The report should provide a total cost per plant and a total cost per item. At that plant. Where multiple locations are viewed the total cost sum for the plants should be provided.
Regards
Prakash

Hi Prakash
Could you please clarify the following
1. Is this write-off stock means stock posted to scrapping (551 mvmt)?
2. What do you mean by IPC and ICC?
If you can able to bifurcate the write-off through mvmt 551 (or any other) you may get all your requirements in MB51 report itself.
Thanks/ GVRR

Error generating report in Report writer (GR214, short dump)

Hello
We are making a report in GGR2. When generating the report group, we have dump with error:
Short text of error message:
Internal error.: SAPMGRW2, Include: MGRW2F20, FORM: GEN_DATAFI
ELD.
Long text of error message:
Technical information about the message:
Message class....... "GR"
Number.............. 214
Variable 1.......... "SAPMGRW2"
Variable 2.......... "MGRW2F20"
Variable 3.......... "GEN_DATAFIELD"
Variable 4.......... " "
I have generated as well via GR52 with the same result.
The report i try to generate has about 500 lines, uses a number of existing sets and has simple formulas in it. When i restrict the number of rows to say 400 I donu2019t have the issue. Is there a restriction to rows in report writer?
Thanks for your help
Kai

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

Report Painter / Writer Help

Hello experts,
Could you please help me with some documentation on report painter and report writer ...
I didn't found detailed wiki to follow for my first report painter sample.
As mentioned in some other threads there's documentation on http://help.sap.com/ but I'm searching for beginners docs to follow step by step.
Thank you in advance for your help.
Regards,
Moez.

Hi Moezz,
Please check below link.
[http://www.virtuosollc.com/PDF/Get_Reporter.pdf]
This document is with Screen shots & step by step one.
This could be of great help for you.
Kindly set to resolved if it helps you.
Regards
Abhii.....

How to create the Set ID for report writer

Hi
I am suppose to create the Set id . Please suggest me the t-code etc for creating set id.
Thanks
Shiv

transaction for creating the set ID GS01
further, the menu path in the application menu is
information system->Ad Hoc Reports ->Report Painter ->Report Writer ->Set
if helpful, plz assign point as way of thanks

Report generation write to file at interval

Hi,
I am using the report generation toolkit to write data to an excel sheet. I am recieving a lot of data but only want to save the data to the excel sheet every minute. I have found threads about doing this with the Write to Measurement Express VI but I am not using that and am unsure how to translate that code to something I could use. Any ideas? I have tried using a case selector around all of the report generation VIs but that doesn't seem to work...
Any help is appreciated!

Nice, can you help kmarcella work that into his code?
Well, the example that I post shows the Big Picture for doing what KMarcella wants to do, namely collect data periodically (like once a minute) and write all of the data, presumably one Excel row at a time, to an Excel Workbook.
The Original Poster has the best understanding of the details of the task, but here are some suggestions that should help him (or her!).
Divide the task into phases.
Initialization Phase -- set up DAQmx channels, define timing parameters, open Excel Workbook.
Loop (repetitive) Phase -- take a single reading, write a single row (or rows) into Excel, and wait for the next point.
Finalization Phase -- close DAQmx, save the Excel Workbook and Dispose Report.
Note that these phases are illustrated in the example -- there's stuff before the loop, the loop, and stuff after the loop.
Strive for compactness and simplicity. Try to fit it on a single screen (1280 by 1024) -- use sub-VIs where necessary to "encapsulate" (or "hide") the Messy Details.
Try to not use Express VIs. For example, a simple Wait to Next ms Multiple is much simpler, more compact, and intuitive than Elapsed Time. You are to be commended for using DAQmx calls directly.
I am completely befuddled by your use of the Dynamic Data Type. It looks very complicated, lots of extra wires, bloating the Block Diagram. It might be necessary (only you know the requirements of the task), but I suspect there is a simpler solution that works with the arrays of data directly.
However, that raises another question as to the nature of the data being collecting and the data being saved. I notice that you are sampling M channels, N samples (I don't know what M and N are), Am I correct that you are sampling way more points than you are writing to Excel? If you are only doing one write a minute, are you sampling faster than 1/minute? What are you doing with the other points?
The reason for the previous question is that my model of your task might be wrong! I'm assuming (and my code does this) that you sample periodically (one sample at a time) and write each sample to Excel. On the other hand, if you are sampling frequently and writing infrequently (say, sampling at 100Hz, maybe displaying the data, and writing a "representative point" every minute), then my model, with the writing in the same loop as the sampling, should probably be replaced with a Producer/Consumer pattern, where you "export" a point once a minute to a parallel "Write-to-Excel" loop.
Another possibly-helpful example is one I posted here about a year ago. If you go to the Search box and type the word Revised, the first entry that pops up should be my earlier post. I think it's a snippet -- try it out and adapt it to your problem (as far as formatting and structuring the page).
Bob Schor

Report Writer Excel integration

I have a serious issue here that I am unable to resolve in report writer or painter.
I want the report to export to excel with some formatting.
The formatting that I want is that.
My report has 1 row of profit center which is variablized for user selection, when a user wants to see a report for a certain range of profit centers, he will enter that in the selection criteria, the report comes out looking fine how I want it but when I turn the excel integration on , I want all the profit centers that were selected in the selection screen to appear in a seperate tab in excel..
So one tab per profit center chosen , How do i do that?
please help, urgent.
thanks.

Hi,
Use section option,
Edit--- sections-New section (with profit center range).
Thanks
Jagannadh

The Microsoft Access database engine cannot open or write to the file in Report Builder 3.0

I am trying to build a report in Report Builder 3.0. I created the Data Source to point to my Excel file and the Data Set. I drag a couple of fields on to the canvas and then choose Run. I get the error: "The Microsoft Access
database engine cannot open or write to the file. It is already opened exclusively by another user". I am using the Excel driver. Why am I getting this message? How can I fix this?

No, now I am getting the error message again. It is quite long:
ERROR [HY000] [Microsoft][ODBC Excel Driver] The Microsoft Access database engine cannot open or write to the file '(unknown)'. It is already opened exclusively by another user, or you need permission to view and write its data.
ERROR [01S00] [Microsoft][ODBC Excel Driver]Invalid connection string attribute Trusted_Connection
Please help

Unable to write an image to excel with report generation toolkit

I am unable to write an image to excel with the report generation toolkit. The VI works fine for word, but when I select Excel the speadsheet pens but remains blank.

Ranjeet
I am using Labview 2013 or 8.0, but here is an image of the very simple test VI.
Regards
Steve

Excel data write using report generation vi's

I can read data from an excel sheet but can not figure a way to write data to specific cells using the LabView report generation vi's.

In the "Excel Easy Table" VI you can specify where you want a table to be placed by wiring a value to the 'Start (0,0)' input. If you want more control than that you will have to open the "Excel_Insert_Table" vi and modify it. It is located in the _exclsub.llb library. I highly recommend making a backup copy of this llb before modifying any VI's in it.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

Modifications in Transaction S_ALR_87013611( Report Writer )

Hi Gurus,
I have a Standard transaction S_ALR_87013611 which in turn calls the transaction KSB1.This former transaction is developed using report writer. The Issue is that when I give Cost Center Values twice in the selection screen with multiple values , I get two cost centre values with same number and the corresponding values are added.So I need to restrict the Cost Centre values in the selection screen to unique values.And for that I need to modify the report . So if anyone have ever worked with report writer or report painter, please tell how to modify the report and add our own coding as in the case of ABAP Query.
Thanks in advance.

Thanks for not replying...I have found the solution myself

Error message in report writer when add new selection filed?

Dear All,
I wanna add a new selection field cost element group and cost element to a report in report writer. I key in GR52 and click the general data selection. I select the set variable &1KSTAR to enter into the set ID. But it shows me the following message:
Set cannot be used in Selection:
Message no. GR807
Diagnosis
You are trying to use a set in report maintenance.
The set cannot be entered in the report definition for any of the dimensions for which the set could be used.
The following error message describes why the set cannot be used for all the dimensions for which the set can be used.
System Response
The set will not be entered in report maintenance.
Procedure
Choose an appropriate set.
What does it mean? I have tried other set variables but sitll gave the same message.
Thank you and good day.
Emma.

At the same time, it gave me a green light message saying:
Characteristic Cost Element is already used in a row
Message no. GR465
Diagnosis
The characteristic Cost Element is already being used in a report row block and therefore cannot be used in a different part of the report.
Technical note: The field name for characteristic Cost Element is KSTAR.
Does it mean I have used the cost element in the report and blocked the cost element so that I can't use it in the selection screen? How can I solve this by not changing the report or should I change the report?
Thank you and good day
Emma

Report Writer Issue

Hi Gurus,
I have created report ZTEPCA12 with report writer .When i check the syntex i am getting the error.
The key figure cell ZTEPCA12 has not yet been defined
Message no. GR687
Can any one please tell me where do i need to define this.
Thank in advance

Hi,
Go into GR32, select the report you have created in change mode. Go to the columns, and view the key figure set. In there you would have defined a set of key figures, which are basically value fields.
The reason for the error could be that you have entered a key figure set there but not defined the set with the key figure fields or you would not have entered a key figure set in the report itself.
Go into GS02 and enter the set name and include the key figures in the column From value from the table defined in the set.
If the set does not exist then create a key figure set with key figures.
Cheers.

R12 - Accounts Payable & PO Accrual Reconciliation Report - write offs

Hi,
As a relative novice to Oracle I need some help.................
My question regards the above which is essentially a "goods received not invoiced" report.
I have a number of items on the report which I would like to write off for two reasons:
(1) I have a small balance left which is basically the difference between the PO and the accounts payable column - in the region of 1p to 5p (therfore a housekeeping exercise)
(2) Items that we've never received an invoice for (we've received the stock for free!). ie there is only an entry in the PO column of the report.
For the above I would like a method of writing off these balances from the report.* This should therefore create a credit in my P&L account.
Your thoughts please.
Thanks in advance.
Jon

This is the forum for the SQL Developer tool. You need to ask your question in an eBusiness suite forum.

Report Writer Reports

Similar Messages

Maybe you are looking for