Reporting -Blank columns
Experts,
Can you please tell me how to remove blank columns in BW report.I tried to surpress in the properties of query ,but still displaying blank columns for periods.
Any suggestions greatly appreciated .
Regards
Mano
Bhanu,
My query got structure and periods.My query have completly empty columns AND some zero values and I tried to right click on Structure properties and check Zero surpress values ...
It is removing all blank columns as well as zero values .
I want to remove only blank columns.
Any suggestions ?
Thanks a lot
Regards
Mano
Similar Messages
-
Layout in sql report gets disturbed in case of blank columns
Hi All,
I have an SQL report which runs from a concurrent program.
Problem is, if there are blank columns in the report then the data shifts to the left.
As shown in the below table, if column Attribute 4 is null then the data for Error column has shifted to the left. The words Incorrect Data should come under heading Error whereas it comes under Attribute4.
ASSET_NUMBER_REC ATTRIBUTE_CATEGORY_CODE ATTRIBUTE4 ERROR
316604 ABCD Incorrect Data
Can someone help me in correcting the report layout.
Regards,
ShrutiASSET_NUMBER_REC ATTRIBUTE_CATEGORY_CODE ATTRIBUTE4 ERROR
316604 ABCD Incorrect Data
Can someone help me in correcting the report layout.
Hi
SQL Report --- Do you mean SQL Query in such case,
Please use NVL function on all column, which will give you proper place result. -
BIP report output in PDF and RTF generating some blank columns or � symbols
Hi Experts,
I am new to BIP. I have developed some BIP reports in 10.1.3.4.1 version which are working fine in Dev and UAT environment.
But it's generating some blank columns and some columns with proper data and some columns with"cellphone" kind of symbol in PDF and " �"
symbols in RTF in Prod environment.
In all the environments the version of BIP is same.
So any help in resolving this issue is appreciated.
Thanks in advance..
Regards,
Suresh.AAll of the complex report logic is handled in your Oracle Report (rdf) file.
If your Oracle report is working OK, then this report should be generating XML.
After running your report, go to the View Requests window. Highlight your request, and click the Diagnostics button. Then click the 'View XML' button. If you see XML data, then you should be OK.
When I faced a similar issue, it was because the '1 step' process didnt work for the particular report I was using. The '1 step' process doesn't work for every report. Which report are you using?
If the report is submitted via a form (not the concurrent manager request form), then you probably need to use 2 steps to produce the desired output.
For more information, see the following thread:
Enhancment to avoid 2 step check printing
HTH,
Mark K -
How can i delete One Blank Column in my report
Hi guru's,
can any one tell me .........
i'm getting one Blank column in Query output.How can i delete that Blank Column ?
in the same way Row Also....
Thanking u advancely
ChandraHere is a site with some nice sample code on deleting rows / columns : [http://www.java2s.com/Code/JavaScript/HTML/ModifyingTableColumns.htm|http://www.java2s.com/Code/JavaScript/HTML/ModifyingTableColumns.htm]
As to where to put the code, edit your web template, then put the code in there. There are script web items that you can use, but be aware that editing javascript in the script item is not too pleasant. I have found the best approach is to rather create the javascript file on my machine, then upload it to the MIME repository, then reference that in the web template.
Here is how I have referenced the javascript file sitting in our MIME repository:
< script src="bwmimerep:///sap/bw/mime/Customer/javascript/CustomCalculations.js" />
I hope this helps you out.
Cheers,
Andrew
Edited by: Andrew Lewis on Jul 18, 2008 9:26 AM -
Adding blank column in Oracel Answers OBIEE
Good morning.
I am attempting to add a 3 blank columns in OBIEE and then adding a formula to one of the blank columns to do a simple math calculation between 3 other columns. I used "CAST(Null as double)" in my column formula to make it a blank column and not pulll data from the field column that I added.
This is what I have so far:
Column1 formula = "Cast (Null as double)"
Column2 formula = "Cast (Null as double)"
Column3 formula = "Cast (Null as double)"
Column4 formula = data already included from the column that I added.
This is what i'm trying to do:
Column3 = (Column4 - Column1 + Column2) <----- In excel I would do something like "=D4-E4+F4" (example)
When I do my SUM function in OBIEE and try to add the columns, it pulls in "Cast(Null as double)" and not the actual column name that I custom edited.
Any help would be appreciate on how to add a blank column and add a simple calculation formula to calculate data from the blank columns once I export my report to excel.
Thank you,
Edited by: 970040 on Nov 7, 2012 8:24 AMThats correct. When I export the report I want to see blank values in the columns. so when I enter data into those blank fields on my excel spreadsheet, I want the totals column to calculate according to my formula specified. My issue is when I specify a null value in my columns in OBIEE, im unable to put a formula to calculate the values in my other columns.
This is what I have so far in OBIEE:
Column1 formula = "Cast (Null as double)"
Column2 formula = "Cast (Null as double)"
Column3 formula = "Cast (Null as double)"
Column4 formula = data already included from the column that I added with values.
This is what I’m trying to do:
Column3 = (Column4 - Column1 + Column2) <----- In excel I would do something like "=D4-E4+F4" (example)
How can I add a value to my column so that when I export it to excel, the column fields will have the formula already included such as "=D4-E4+F4" and also each row formula corresponding to the correct Row Number. -
Display Blank Column in Bex Analyzer without Error
Hi Experts,
i have created a report with several columns.
To display the coorect descrition i use a new selecion and insert the required infoobject or Key Figure" it is ok.
Whe want to display two blank columns.
The problem i have is that there are some errors saying i should define thoses columns.
How to define a blank cloumn which is displaying the description but empty?
Thank you for your Input.
GiloInside the query designer there should be a "columns" section. Formulas can be configured either by:
- creating a structure (dragging a structure from the left or creating a new structure)...or....
- dragging a key figure from the left window pane over to the "columns" section.
- you could create a new calculated key figure or restricted key figure, but this is not necessary in our example.
Right click on the structure or Key Figures. There should be 2 options: New Selection or New Formula. We chose new formula, add appropriate text/heading/description and put a =0 in the formula box, prior to clicking OK. The wider the heading text, the wider the new blank column will look.
Then right click on the column you just created to change it's properties to = suppress result for both the "calculate result as" and the "calculate single values as".... -
Hi All,
How do I create a blank column with the column name in the report?
I tried with "structure-new selection" with the report name(Structure being Key Figures)- the system pops out an error message stating that it needs unique value for each cell.
Thanking in advance.Thanks Bhanu. It did work.
I did try query properties suppression zeroes for both rows and columns with Active =0 but it is not suppressing the zeroes.
Thanks again. -
Blank column in spread sheet when i am downloading?
hai fnds...any one help for the below issue
i have developed ALV report used ( layout also in that ).displaying 19 fields in the output. but when i am downloading spread sheet iam getting one blank column in spread sheet.(but all 19 fields are comming ). i dont know why i am getting second column is blank? but otherthan spreadsheet format is not getting any blank column.
here for the purpose of change layout and save layout i am using
DATA: gv_boxnam TYPE slis_fieldname value 'VENUM'.
VENUM field which is in internal table but not displaying the output. is this any problem?
Suppose if i take DATA: gv_boxnam TYPE slis_fieldname value 'VBELN'. which is in internal table and displaying the output..in this case i m not getting the VBELN in the output..i am getting only 18 fields in the output.
Thanks,
Raghu.the download is a copy of the table behind the ALV display. It sounds like the table for the ALV display contains a column that is flagged as no output?
-
Having Excel blank column issues since switching from 8.5 to XI.
Please help!!! My company updated from Crystal 8.5 to XI over the weekend and the reports are now coming through with blank columns. What can be done to fix that?
Thanks,
WesI am having the same problem (XI) and going nuts.
Visually, all the fields appear to be flush with each other.
I even went as far as to look at the Size / Position of each header and data field to make sure they all are correct.
Example.
All fields and headers are of size .7.
I have made sure that each subsequent field starts at position x + .7.
So column 1 begins at X =3.
Column 2, is X = 3.7
Column 3 is X = 4.4
Column 4 is X = 5.1
Column 5 = 5.8
etc.
No matter what I do, I can't get rid of the blank column that appears between columns 3 and 4.
I have noticed that column 4 keeps getting reset to 5.09 rather than the 5.1 that I enter. Could that be doing it? And if so WHY is it not allowing me to change it?
Any ideas? -
Is there a way to add blank columns to a report?
ThanksInsert any column where you want the blanck column and replace the formula on that column with two single quotes.
Mike L -
On my financial reports I am trying to add a blank column between my Monthly and YTD Budget, but can't get it to work. The Budget continues to populate in the blank column. Any suggestions on what I could try or where I could get additional help on setting my theme up would be appreciated.
Thanks,
Stephanie HafermannOn my financial reports I am trying to add a blank column between my Monthly and YTD Budget, but can't get it to work. The Budget continues to populate in the blank column. Any suggestions on what I could try or where I could get additional help on setting my theme up would be appreciated.
Thanks,
Stephanie Hafermann -
Getting blank column when downloading spreadsheet?
hai fnds...any one help for the below issue
i have developed ALV report used ( layout also in that ).displaying 19 fields in the output. but when i am downloading spread sheet iam getting one blank column in spread sheet.(but all 19 fields are comming ). i dont know why i am getting second column is blank? but otherthan spreadsheet format is not getting any blank column.
here for the purpose of change layout and save layout i am using
DATA: gv_boxnam TYPE slis_fieldname value 'VENUM'.
VENUM field which is in internal table but not displaying the output. is this any problem?
Suppose if i take DATA: gv_boxnam TYPE slis_fieldname value 'VBELN'. which is in internal table and displaying the output..in this case i m not getting the VBELN in the output..i am getting only 18 fields in the output.
Thanks,
Raghu.try this:
concatenate all the data in a string type table seperated by commas.
move this new table to the excel.
i hope it will work fine then -
Need help to develop report with column chart
Hi
I am new to SAP BO world.Could anyone please help me to design report with column chart.Please guide me how to develop report for the following requirement.I am not aware of variance columns and variance labels.Please provide some guidance or some tutorials(for column Chart) so that I can complete the task. Please reply me as soon as possible.Waiting for reply.Thanks in advance.
Type: Column Chart
u2022 Rows: Banking Asset Margin (%)
u2022 Start / End Columns: PY YTD Act(Prior year year to date); CY YTD Act(Current year Year to date)
u2022 Variance Columns: # Var (CY-PY Act) for GOLM; Volume; Rate; Non Banking NII; Banking Volatility in NII; Banking Volatility in OOI; Fees/One Offs/Other; Volatile Items; Sophie
u2022 Sub-total columns: PY YTD Underlying; CY YTD Underlying.
u2022 Variance Labels: % Var (CY-PY Act) for Total Income and Underlying Income
u2022 Sub-Total Labels: # Var (CY-PY Act) for Net Insurance Income; Banking Volatility; Other Operating Income
Additional information
u2022 Variance columns (bar) colours: Red = Adverse to Prior Year; Green = Favourable to Prior Year
u2022 Columns to show values. Adverse values to be shown in red text in brackets. Favourable results in black text.
u2022 All values in Black, but adverse to be shown below the bar.Hi,
This type of question is almost impossible to answer over a forum .
You need to work with your business to understand what these requirements mean in terms of data modelling and relationships between object entities.
- Some of these metrics should be delegated to source, and calculated in the update routines to your datatargets (aka Cubes/Tables)
- Others could be resolved in the semantic layer (Universe)
- Other will be calculated in the presentation layer as local formulae or variables.
whilst BusinessObjects is a fairly intuitive tool, it may be unreasonble to expect a new learner to deliver an advanced report with conditional formatting.
Regards,
H -
Hints on Interactive Report's column headers
Hi,
I've used +"< spa.n title = "Hint" > Header < / span>"+ (the first 'spa.n' is so it doesn't interpret as code) to put hints on my report columns headers but found that, when using interactive report's tools, the column names that appear obviously include the "code".
Is there any way to put hints on interactive report columns and still maintain the proper title(in this case Header) when using the tools?
Thank you,
MarcHi,
Thank you for the tip Ghoulies. The spaces I put trying to make it read as text. The code works fine, it actually shows the Header in the report's column and the hint appears on mouse-over.
What I mean is, when using interactive report's tools, such as "Select Columns", The <span title="hint">header</span> {code} appears as the column name in the +display / not display+ boxes.
Is there any other way to put hints on Interactive reports so that this doesn't happen?
Marc -
Report Template, Column Template, Column Template Condition
I have a template, Standard Revenue from Standard, I have cloned for a Classic report.
Application ###>Shared Componets>Templates>Edit Report Template
Column Template 1 looks like:
<td#ALIGNMENT# headers="#COLUMN_HEADER_NAME#" class="t1data_revenue">#COLUMN_VALUE#</td>
I have set Column Template 1 Condition to:
"Use based on PL/SQL expresiion"
I have tried several expression in "Column Template 1 Expression" - last one is:
case
when #COLNUM# <= 2 then false
when #COLUMN_VALUE# < 0 then true
else false
end case;
I am trying to use the value in "Column Template 2" when to value of the #COLUMN_VALUE# < 0
where "Column Template 2" is :
<td#ALIGNMENT# headers="#COLUMN_HEADER_NAME#" class="t1data_revenue_negative">#COLUMN_VALUE#</td>
I get the following error when I run the page:
ORA-01403: no data found
and
ERR-1025 Error processing PLSQL expression. case when #COLNUM# <= 2 then false when #COLUMN_VALUE# < 0 then true else false end case;
Any help will be appreciated.
thank you,
jwmHi,
That's actually easier. See: [http://apex.oracle.com/pls/otn/f?p=267:60]
The SQL for both reports is:
SELECT EMPNO, ENAME, NVL(SAL,0) SAL, NVL(COMM,0) COMM
FROM EMP
ORDER BY EMPNOThe SAL and COMM columns have been formatted using:
999G999G999G999G990D00For the Row Template, the Row Template 1 setting contains an empty space (you have to have something in there otherwise Apex adds back in a default row containing five cells!). The condition for this is:
TO_NUMBER('#COMM#','999G999G999G999G990D00') < 100The template will see the data as a string, so we use the same number format to convert that string back into a number and compare this to 100. If we didn't use formatting on the numbers and we are sure that every row contained a number (hence the use of NVL()), then you could use:
#COMM# < 100Row Template 2 contains the format for the rows that need displaying:
<tr>
<td class="t18Data">#1#</td>
<td class="t18Data">#2#</td>
<td class="t18Data" style="text-align:right">#3#</td>
<td class="t18Data" style="text-align:right">#4#</td>
</tr>and is unconditional.
The only other settings on the Row Template are the Before Rows:
<table class="t18Standard" style="border-collapse:collapse; border:1px solid black;">
<tr>
<th class="t18ReportHeader">Empno</th>
<th class="t18ReportHeader">Ename</th>
<th class="t18ReportHeader" style="text-align:right">Sal</th>
<th class="t18ReportHeader" style="text-align:right">Comm</th>
</tr>and After Rows:
</table>Of course, you will note that the record counters at the bottom still show the number of records in both reports - as the SQL still outputs the same data, this doesn't change.
Andy
Maybe you are looking for
-
Automatic PO generation while doing MIGO
Hi, Please guide me the details configuration and data maintain steps to enable automatic po generation at the time of doing MIGO with the movement type . Thanks in Advance, Regards, Soumen
-
When I attempt to print or print preview I get the following message "An unknown error occurred while printing."
-
Error, in Getting started with Labview. Chapter 3, part 4.
Hi. Still struggling on, trying to find the time to work through the "Getting Started with LabVIEW" document. Only 19 days left to go, and I'm still only in chapter 3!... Right. In the "Saving Data When Prompted by a User" exersise, part 4... 4. R
-
ZEN MICRO: How to save files (to my harddi
Hi everyone! I would like to install most recent firmware for my ZEN MICRO. Creative strongly recommends, to save all data (here: music files) beforehand. But how? I should let you know, that most of the music (around 350 files) has been filed under"
-
How I can upgrade my iPad (iOS 3.2.2) to iOS 4.0.0 or later ? I'm from Indonesia. I have my iPad (the first version) from 2 years ago. Now I have a trouble to download some apps in App Store just because of the requirements doesn't support for my iPa