Reporting Services Preview Failure
I am migrating RS reports from SQL 2008 to SQL 2012. As a first step I created a new solution in Visual Studio 2012 (Install includes VS 2012 Premium 32 bit, VS 2012 Update 2, SSDT-BI for VS 2012, SSDT-BI for VS 2012 Update and BIDS).
After creating the new solution I added existing rds and rdl files from my TFS production branch. When I open a report in the VS designer it opens without a problem. When I click on the preview tab the initial rendering of the report works
fine. After I enter the parameters (a beginning and ending date) and click the view report button I get the following error message:
"An error occurred during local report processing. An error has occurred during report processing."
Consequently I'm unable to preview the report. If I build the report and deploy the report I get no error messages. If I run the report on the reporting services server it runs and renders the results without a problem. I'm just unable
to render the results within the VS Preview panel.
Given how uninformative the error message is does anyone have an idea what I should investigate next to track down the problem?
Hi Daeule,
Since the report runs properly after being deployed to the report server, there are no problems with the report definitions. To check whether the issue is caused by the SSDT which may not be upgraded properly, please try the following suggestions:
1. Click Start -> Visual Studio 2012 -> Visual Studio tools -> Visual Studio Command Prompt to start the command line tool.
2. Run the command to see whether the issue occurs in Visual Studio Safe Mode:
devenv /safemode
3. If it can run properly, please run the following command lines and run the Visual studio again:
devenv /resetSettings
If the issue persists, you can uninstall the SSDT installed by SQL Server (not Visual Studio), and then install the SSDT from the SQL Server 2012 installation media, and Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2012.
If there are any error details displayed in the SSDT, please post them for further analysis.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support
Similar Messages
-
SQL Server Reporting Services Subscriptions - Failure sending mail
Hello All,
I am having a problem with using subscriptions to send my reporting services report by email.
Getting the following error:
Failure sending mail: The message could not be sent to the SMTP server. The transport error code was 0x800ccc6d. The server response was 552 Error: message too large
While browsing for other reports in the report manager(reports created by others staffs), i could find that these reports were sent by email successfully.
So not understanding why mine has a problem. logically it could be that the report is too big?
Anybody has a solution or suggestion?
Thanking you in advanceHi LenitaS,
For first question, we can check the item "IncludeLink" to embed the link in the mail. Or, embed the link the manually by putting a link in the "Comment" field. The URL should be a standard URL Access:
http://<reportserver>/reprotserver?/reportpath&rc:format=<format>
For the second question, you are right. We can follow these setps to work around the issue:
1.Create a file shared subscription, save the export to a shared folder.
2.Create a E-Mail delivery subscription, embed the file's path in the mail. We can set the file's path in "Comment" field of the E-Mail delivery. The path should be someone like this:
\\<sharedfolder>\<export report>
In this case, the exported report's name cannot be dynamic.
If there is anything unclear, please feel free to ask.
Thanks,
Jin ChenJin Chen - MSFT -
Reporting Services Schedules failure
Hi,
We are facing certain issue in reporting services. We were trying to change the timing of shared schedule and when hit the save button, it did not saved new timings but shown below error. Before changing the timings, schedule was working fine.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Get Online Help
There are two or more jobs named 'F9756B18-FEF6-4197-B790-172D908ABAAE'. Specify @job_id instead of @job_name to uniquely identify the job.
Now clicking on Manage shared schedule is also showing same error. We had faced same issue earlier once. ReportServer Database table Schedule is
showing single schedule. Please help me to figure out the problemHi ANREV107,
According to your description, you created a shared schedule and it works fine, when you tried to change time of it and click save button, the error message occurred.
I tried to reproduce the issue in my local machine, but it works fine for me to change time of shared schedule. To solve the problem, we need to go the SQL Server hosting the ReportServer database and delete one of the duplicate jobs with the id: 'F9756B18-FEF6-4197-B790-172D908ABAAE',
then delete the other from the report server UI.
If the problem remain unresolved, i would appreciate it if you could give us detailed error log(default location: %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles). It is helpful if you could provide more information
about how the situation occurred, the version of SQL Server. Does it happen often, or only when the report server is under load. It will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
Windows Error Reporting service connection failure
For some reason unknown to me, the Windows Error Reporting service has now decided that it cannot send crash reports to Microsoft.
I get the above error when I try to "Check for a solution" from Review Problem Reports Dialog. "Trying again later"
does not work. I've tried several recommended "fixes" including scanning for corrupted system files, making sure the WER service is running, and, checking firewall issues. Sending crash reports used to work, so, I'm at a loss as to why this is happening.
Can anyone shed some light on a possible cause?
Gort, Klaatu, Barada NiktoRelating to the WER-Diagnostics, Vaseem posted some useful steps to resolve that issue here: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/possible-heap-corruption-detected-exception-code/0657809a-a78b-48c7-9e6e-ac8ca97522c2
Here are the steps suggested:
Method 1:
Run System File Checker tool and check for missing or corrupted files follow the steps in the link:
http://support.microsoft.com/kb/929833
Method 2:
Open performance troubleshooter. Follow the steps in the link:
http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter
Method 3:
If the above step fails follow these steps:
Step a:
Restart computer in safe mode. Follow the steps from the link:
http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
Step b:
If safe mode works then try in clean boot. Follow the steps from the link:
http://support.microsoft.com/kb/929135
Follow the step 7 from the article to “Reset the computer to start as usual”, after performing the clean boot troubleshooting.
Also follow the steps in the link:
http://support.microsoft.com/kb/937093
Note: This above article is applicable for Windows 7 as well.
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional -
DPM 2010 installation failure (SQL-server Reporting Services Problem)
Hi everyone,
The last 2 days I have been trying to get DPM 2010 installed on a DC. I know this is not recommended, but for our company with the current setup it's the only way to do it.
I have been reading some Microsoft articles (http://technet.microsoft.com/en-us/library/ff399416.aspx) about doing this but I fail to do so.
I have made all of the right service accounts (I guess) and am doing everything in the guide but still get the same error message over and over again:
Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to DPM2010 of SQL Server
I just can't get my head around it. This is the error message when I try to install DPM 2010 using an existing SQL-database which I have configured in the SQL 2008-server sp1 installation.
I have enclosed some screenshots so you could maybe check some things that are not correct? Hopefully we can get this issue resolved, because it's driving me crazy to be honest!
Physical server which is ADC and where I need to install SQL-server and DPM: VMBACKUP
The service account for DPM is: DPMSQLSvcsAcct
Also have another service account: DPMR$VMBACKUP
I have also enclosed the error log located in C:\DPMLogs\This is the DOM error log:
MSI (s) (D0:4C) [14:59:59:626]: Windows Installer reconfigured the product. Product Name: Microsoft Application Error Reporting. Product Version: 12.0.6015.5000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (D0:4C) [14:59:59:627]: Deferring clean up of packages/files, if any exist
MSI (s) (D0:4C) [14:59:59:628]: MainEngineThread is returning 0
MSI (s) (D0:D8) [14:59:59:631]: RESTART MANAGER: Session closed.
MSI (s) (D0:D8) [14:59:59:631]: No System Restore sequence number for this installation.
=== Logging stopped: 27/03/2012 14:59:59 ===
MSI (s) (D0:D8) [14:59:59:632]: User policy value 'DisableRollback' is 0
MSI (s) (D0:D8) [14:59:59:632]: Machine policy value 'DisableRollback' is 0
MSI (s) (D0:D8) [14:59:59:632]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D0:D8) [14:59:59:632]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D0:D8) [14:59:59:633]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D0:D8) [14:59:59:633]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (D0:D8) [14:59:59:634]: Restoring environment variables
MSI (s) (D0:D8) [14:59:59:634]: Destroying RemoteAPI object.
MSI (s) (D0:90) [14:59:59:635]: Custom Action Manager thread ending.
MSI (c) (9C:04) [14:59:59:636]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (9C:04) [14:59:59:637]: MainEngineThread is returning 0
=== Verbose logging stopped: 27/03/2012 14:59:59 ===
[27/03/2012 14:59:59] Information : MsiInstallProduct returned 0.
[27/03/2012 14:59:59] Information : End install.
[27/03/2012 14:59:59] Information : **************************************************************************************
[27/03/2012 14:59:59] Information : **************************************************************************************
[27/03/2012 14:59:59] Information : Start Inspect.
[27/03/2012 14:59:59] Information : Check processor configuration.
[27/03/2012 14:59:59] Information : Query WMI provider for configuration of processor. (Namespace : \\localhost\root\cimv2).
[27/03/2012 14:59:59] Information : Query for WMI class. (Query : SELECT * FROM Win32_Processor).
[27/03/2012 15:00:00] Data : Clock speed of processor = 2500
[27/03/2012 15:00:00] Data : Manufacturer of processor = GenuineIntel
[27/03/2012 15:00:00] Information : Check the amount of RAM.
[27/03/2012 15:00:00] Information : Query WMI provider for configuration of memory. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_OperatingSystem).
[27/03/2012 15:00:00] Data : Found memory = 14677964
[27/03/2012 15:00:00] Data : Total amount of memory = 14677964
[27/03/2012 15:00:00] Information : Check the version of Microsoft Management Console on the machine.
[27/03/2012 15:00:00] Data : Version of Microsoft Management Console on the machine = 6.1.7600.16385
[27/03/2012 15:00:00] Data : Required version of Microsoft Management Console = 5.2.3790.2560
[27/03/2012 15:00:00] Information : MMC correct version is detected.
[27/03/2012 15:00:00] Information : Check if this machine is part of active directory.
[27/03/2012 15:00:00] Data : Looking for Active Directory node = LDAP://RootDSE
[27/03/2012 15:00:00] Information : Active Directory is detected on this machine.
[27/03/2012 15:00:00] Information : Check if the machine role is Domain Controller.
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_ComputerSystem).
[27/03/2012 15:00:00] Data : Localhost in Computer role = 4
[27/03/2012 15:00:00] * Warning : DPM Setup has detected that this computer is a domain controller.Make sure that you have followed the steps given in the link below before proceeding with the DPM Setup.
[27/03/2012 15:00:00] Information : The machine role is a Domain Controller.
[27/03/2012 15:00:00] Information : Check if Volsnap QFE is applied.
[27/03/2012 15:00:00] Information : Volsnap QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if Logical Disk Manager (LDM) QFE is applied.
[27/03/2012 15:00:00] Information : LDM QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB962975 QFE is applied.
[27/03/2012 15:00:00] Information : KB962975 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB975759 QFE is applied.
[27/03/2012 15:00:00] Information : KB975759 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB955543 QFE is applied.
[27/03/2012 15:00:00] Information : KB955543 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Detect if Powershell is installed.
[27/03/2012 15:00:00] Data : Installed Version of Windows Powershell. = 6.1.7600.16385
[27/03/2012 15:00:00] Data : Minimum Required version of Windows Powershell. = 6.0.6002.18111
[27/03/2012 15:00:00] Information : Required version of Powershell software is installed on this system.
[27/03/2012 15:00:00] Information : Check if reboot is required because of Dot Net installation.
[27/03/2012 15:00:00] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot.
[27/03/2012 15:00:00] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot is absent.
[27/03/2012 15:00:00] Information : Reboot is not required.
[27/03/2012 15:00:00] Information : Detect if SIS Service is running.
[27/03/2012 15:00:00] Information : Detect if SIS Filter service SIS is running.
[27/03/2012 15:00:00] Information : SIS Service SIS is running on this system.
[27/03/2012 15:00:00] Information : Check the version of Windows Installer on the machine.
[27/03/2012 15:00:00] Data : Version of Windows Installer on the machine = 5.0.7601.17514
[27/03/2012 15:00:00] Data : Required version of Windows Installer = 4.5.6001.18000
[27/03/2012 15:00:00] Information : Windows Installer correct version is detected.
[27/03/2012 15:00:00] Information : Check if Removable Storage Service (Rsm) is disabled or not.
[27/03/2012 15:00:00] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='NtmsSvc').
[27/03/2012 15:00:01] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: NtmsSvc : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckRsmServiceConfig(InspectContext context)
[27/03/2012 15:00:01] Information : Check if reboot is required.
[27/03/2012 15:00:01] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired.
[27/03/2012 15:00:01] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired is absent.
[27/03/2012 15:00:01] Information : Reboot is not required.
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 is installed.
[27/03/2012 15:00:01] Information : Query WMI provider for SQL Server 2008. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:01] Information : Query for WMI class. (Query : Select * from SqlServiceAdvancedProperty where ServiceName='{0}' and PropertyName='Version').
[27/03/2012 15:00:01] Information : SQL Server 2008 MSDPM2010 instance is not present on this system.
[27/03/2012 15:00:01] *** Error : Setup has detected that the instance provided is not a SQL Server 2008 instance. Please provide a SQL Server 2008 instance having Service Pack 1 installed.
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 Tools is installed.
[27/03/2012 15:00:01] Information : SQL Server 2008 Tools is installed
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 SP1 is applied.
[27/03/2012 15:00:01] Information : Query WMI provider for SQL Server 2008 SP1. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:01] Information : Query for WMI class. (Query : Select * From SqlServiceAdvancedProperty Where ServiceName='MSSQL$MSDPM2010' AND PropertyName = 'SPLEVEL').
[27/03/2012 15:00:02] Information : Sql Server 2008 Service Pack Level is 0
[27/03/2012 15:00:02] Information : SQL Server 2008 SP1 is not present on MSDPM2010 instance of this system.
[27/03/2012 15:00:02] *** Error : Setup has detected that SQL Server 2008 Service Pack 1 has not been installed on the VMBACKUP\MSDPM2010 instance.Install SQL Server 2008 Service Pack 1 or higher and try again.
[27/03/2012 15:00:02] Information : Check SQL Server Agent service configuration.
[27/03/2012 15:00:02] Data : SQL Server instance name = MSDPM2010
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='SQLAgent$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: SQLAgent$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckSqlAgentServiceConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service SQLAgent$MSDPM2010 is not installed. The SQL Server 2008 installation is not valid.Uninstall SQL Server 2008 and then run DPM Setup again.
[27/03/2012 15:00:02] Information : SQL Server Agent service configuration is not correct.
[27/03/2012 15:00:02] Information : Check SQL Server service configuration.
[27/03/2012 15:00:02] Data : SQL Server instance name = MSDPM2010
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: MSSQL$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckSqlServerServiceConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service MSSQL$MSDPM2010 is not installed. The SQL Server 2008 installation is not valid.Uninstall SQL Server 2008 and then run DPM Setup again.
[27/03/2012 15:00:02] Information : SQL Server service configuration is not correct.
[27/03/2012 15:00:02] Information : Detect if SQL Server is evaluation edition
[27/03/2012 15:00:02] Information : Check for existing database.
[27/03/2012 15:00:02] Information : Starting service
[27/03/2012 15:00:02] Data : Service name = MSSQL$MSDPM2010
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: MSSQL$MSDPM2010 ---> System.InvalidOperationException: Service MSSQL$MSDPM2010 was not found on computer 'VMBACKUP'. ---> System.ComponentModel.Win32Exception: The specified service does not exist as an installed service
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.GenerateNames()
at System.ServiceProcess.ServiceController.get_ServiceName()
at System.ServiceProcess.ServiceController.GenerateStatus()
at System.ServiceProcess.ServiceController.get_Status()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartService(String serviceName, String machineName, Boolean restart)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.CheckServiceStartError(String serviceName, InvalidOperationException invalidOperationException)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartService(String serviceName, String machineName, Boolean restart)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartSqlService(String instanceName, String sqlServerMachineName)
[27/03/2012 15:00:02] Information : Dpmdb does not exist on this system.
[27/03/2012 15:00:02] Information : Check if SQL Server 2008 Reporting Services is installed.
[27/03/2012 15:00:02] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2010\v10\admin).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2010').
[27/03/2012 15:00:02] * Exception : => System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportServerNotInstalledException: Report server is not installed ---> System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectReportingPrerequisites.CheckSqlServerReportingServices(InspectContext context)
[27/03/2012 15:00:02] Information : SQL Server 2008 Reporting Services MSDPM2010 instance is not installed.
[27/03/2012 15:00:02] *** Error : Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to MSDPM2010 of SQL Server.1)To use the local dedicated MSDPM2010 instance with DPM, uninstall SQL Server and run setup again.
2)To use the option of installing DPM with an existing instance of SQL Server, make sure that the Reporting Services instance is also installed and linked correctly. For details, refer to DPM Setup Help.
[27/03/2012 15:00:02] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='ReportServer$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: ReportServer$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectReportingPrerequisites.CheckRosettaServicesConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service ReportServer$MSDPM2010 is not installed. The SQL Server 2008 Reporting Services installation is not valid.Uninstall SQL Server 2008 Reporting Services and then run DPM Setup again.
[27/03/2012 15:00:02] Information : Report Server service configuration is not correct.
[27/03/2012 15:00:02] Information : End Inspect.
[27/03/2012 15:00:02] Information : **************************************************************************************
[27/03/2012 15:00:02] Information : Instantiating inspect component.
[27/03/2012 15:00:02] Data : Path of output xml = \PostInstallInspect.xml
[27/03/2012 15:00:03] Information : <<< Dialog >>> Inspect Page : Leaving
[27/03/2012 15:00:03] Information : <<< Dialog >>> User Information Page : Entering
[27/03/2012 15:00:03] Data : Purchased Client Agent Licenses = 0
[27/03/2012 15:00:03] Data : Purchased Standard Agent Licenses = 0
[27/03/2012 15:00:03] Data : Purchased Enterprise Agent Licenses = 0
[27/03/2012 15:00:09] Information : <<< Dialog >>> User Information Page : Leaving
[27/03/2012 15:00:09] Data : Purchased Client Agent Licenses = 0
[27/03/2012 15:00:09] Data : Purchased Standard Agent Licenses = 0
[27/03/2012 15:00:09] Data : Purchased Enterprise Agent Licenses = 0
[27/03/2012 15:00:09] Information : <<< Dialog >>> Install location Page : Entered
[27/03/2012 15:00:09] Information : Check if the media is removable
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] Data : Drive Name = C:\
[27/03/2012 15:00:09] Data : Drive Type = 3
[27/03/2012 15:00:09] Information : Check attributes of the directory
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft DPM'.
File name: 'C:\Program Files\Microsoft DPM'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:09] Information : Check if the media is removable
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] Data : Drive Name = C:\
[27/03/2012 15:00:09] Data : Drive Type = 3
[27/03/2012 15:00:09] Information : Check attributes of the directory
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:11] Information : Check if the media is removable
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] Data : Drive Name = C:\
[27/03/2012 15:00:11] Data : Drive Type = 3
[27/03/2012 15:00:11] Information : Check attributes of the directory
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft DPM'.
File name: 'C:\Program Files\Microsoft DPM'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:11] Information : Query free disk space
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] Data : Free Space = 2373
[27/03/2012 15:00:11] Information : Query free disk space
[27/03/2012 15:00:11] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:11] Data : Free Space = 2373
[27/03/2012 15:00:17] Information : Check if the media is removable
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : Drive Name = D:\
[27/03/2012 15:00:17] Data : Drive Type = 3
[27/03/2012 15:00:17] Information : Check attributes of the directory
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : File Attributes = Directory
[27/03/2012 15:00:17] Information : Query free disk space
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : Free Space = 786513
[27/03/2012 15:00:17] Information : Query free disk space
[27/03/2012 15:00:17] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:17] Data : Free Space = 2373
[27/03/2012 15:00:18] Information : Check if the media is removable
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Drive Name = D:\
[27/03/2012 15:00:18] Data : Drive Type = 3
[27/03/2012 15:00:18] Information : Check attributes of the directory
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : File Attributes = Directory
[27/03/2012 15:00:18] Information : Check if the media is removable
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Data : Drive Name = C:\
[27/03/2012 15:00:18] Data : Drive Type = 3
[27/03/2012 15:00:18] Information : Check attributes of the directory
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:18] Information : Check the filesystem on which DPM and prerequisites are installed
[27/03/2012 15:00:18] Information : D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Information : C:\Windows\system32
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Free Space = 786513
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Data : Free Space = 2373
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:18] Data : Free Space = 2373
[27/03/2012 15:00:18] Data : Location of program files = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Location of database files = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Information : <<< Dialog >>> Install location Page : Leaving
[27/03/2012 15:00:27] Data : Path of inspection output xml = C:\\DPMLogs\RemoteDbInspectReport.xml
[27/03/2012 15:00:27] Information : Instantiating inspect component.
[27/03/2012 15:00:27] Data : Path of output xml = C:\\DPMLogs\RemoteDbInspectReport.xml
[27/03/2012 15:00:27] Information : **************************************************************************************
[27/03/2012 15:00:27] Information : Start Inspect.
[27/03/2012 15:00:27] Information : Check if SQL Server 2008 is installed.
[27/03/2012 15:00:27] Information : Query WMI provider for SQL Server 2008. (Namespace : \\localhost\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:27] Information : Query for WMI class. (Query : Select * from SqlServiceAdvancedProperty where ServiceName='{0}' and PropertyName='Version').
[27/03/2012 15:00:28] Information : SQL Server 2008 DPM2010 instance is present on this system.
[27/03/2012 15:00:28] Information : Check if SQL Server 2008 SP1 is applied.
[27/03/2012 15:00:28] Information : Query WMI provider for SQL Server 2008 SP1. (Namespace : \\localhost\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:28] Information : Query for WMI class. (Query : Select * From SqlServiceAdvancedProperty Where ServiceName='MSSQL$DPM2010' AND PropertyName = 'SPLEVEL').
[27/03/2012 15:00:28] Information : Sql Server 2008 Service Pack Level is 3
[27/03/2012 15:00:28] Information : SQL Server 2008 SP1 is present on DPM2010 instance of this system.
[27/03/2012 15:00:28] Information : Check SQL Server Agent service configuration.
[27/03/2012 15:00:28] Data : SQL Server instance name = DPM2010
[27/03/2012 15:00:28] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:28] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='SQLAgent$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : SQL Server Agent service configuration is correct.
[27/03/2012 15:00:29] Information : Check SQL Server service configuration.
[27/03/2012 15:00:29] Data : SQL Server instance name = DPM2010
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : SQL Server service configuration is correct.
[27/03/2012 15:00:29] Information : Detect if SQL Server is evaluation edition
[27/03/2012 15:00:29] Information : Check the disk space for remote database.
[27/03/2012 15:00:29] Information : Remote Db disk space required : 900 MB disk space available = 786513 MB
[27/03/2012 15:00:29] Information : Check the Named Pipes protocol for remote database.
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM2010').
[27/03/2012 15:00:29] Information : Check for existing database.
[27/03/2012 15:00:29] Information : Starting service
[27/03/2012 15:00:29] Data : Service name = MSSQL$DPM2010
[27/03/2012 15:00:29] Data : Current status of service = Running
[27/03/2012 15:00:29] Information : Service is already running
[27/03/2012 15:00:29] Data : Database connection string = Pooling = false;Integrated Security=SSPI;database=master;server=np:localhost\DPM2010
[27/03/2012 15:00:29] Information : Dpmdb does not exist on this system.
[27/03/2012 15:00:29] Information : DPM database DPMDB is missing or corrupt.If you are performing a clean installation of DPM, you must delete the DPM database before you run Setup. If you are upgrading or repairing an existing installation of DPM, you must restore a valid DPM database, and then proceed with Setup.
[27/03/2012 15:00:29] Information : Check whether the remote db msi has been installed.
[27/03/2012 15:00:29] Information : Check DPM Database Version.
[27/03/2012 15:00:29] Data : Database connection string = Pooling = false;Integrated Security=SSPI;database=DPMDB;server=localhost\DPM2010
[27/03/2012 15:00:29] * Exception : Expecting the following exception. Ignoring intentionally. => System.Data.SqlClient.SqlException: Cannot open database "DPMDB" requested by the login. The login failed.
Login failed for user 'MANAGEMENT\DPMSQLSvcsAcct'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlContext.Open()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectDls.CheckDBVersion(InspectContext context)
[27/03/2012 15:00:29] Information : detectResult = DPMDBAbsent
[27/03/2012 15:00:29] *** Error : DPM Setup has detected that the DPM database files are missing from the selected instance of SQL Server 2008.Make sure that the correct database files are attached to the selected instance of SQL Server and then install DPM 2010 again.
[27/03/2012 15:00:29] Information : Checking if DPM db backup is needed.
[27/03/2012 15:00:29] Information : This is not upgrade path, so no DB Backup needed
[27/03/2012 15:00:29] Information : DPM DB Backup is not needed.
[27/03/2012 15:00:29] Information : Check if SQL Server 2008 Reporting Services is installed.
[27/03/2012 15:00:29] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services. (Namespace : \\localhost\root\Microsoft\SqlServer\ReportServer\RS_DPM2010\v10\admin).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM2010').
[27/03/2012 15:00:29] Data : Path of configuration file for SQL Server 2008 Reporting Services = D:\Program Files\Microsoft SQL Server\MSRS10.MSRS10\Reporting Services\ReportServer\RSReportServer.config
[27/03/2012 15:00:29] Information : Query WMI provider for instance linked to SQL Server 2008 Reporting Services. (Namespace : \\localhost\root\Microsoft\SqlServer\ReportServer\RS_DPM2010\v10\admin).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM2010').
[27/03/2012 15:00:29] Data : Database server for SQL Server 2008 Reporting Services = VMBACKUP\DPM2010
[27/03/2012 15:00:29] Information : SQL Server 2008 Reporting Services DPM2010 instance is installed and linked to SQL Server VMBACKUP\DPM2010.
[27/03/2012 15:00:29] *** Error : Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to DPM2010 of SQL Server.1)To use the local dedicated DPM2010 instance with DPM, uninstall SQL Server and run setup again.
2)To use the option of installing DPM with an existing instance of SQL Server, make sure that the Reporting Services instance is also installed and linked correctly. For details, refer to DPM Setup Help.
[27/03/2012 15:00:29] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='ReportServer$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : Report Server service configuration is correct.
[27/03/2012 15:00:29] Information : Check Reporting SecureConnectionLevel.
[27/03/2012 15:00:29] Information : Getting the reporting secure connection level for localhost/DPM2010
[27/03/2012 15:00:29] Information : Setup detected that the Reporting SecureConnectionLevel is 0.
[27/03/2012 15:00:29] Information : End Inspect.
[27/03/2012 15:00:29] Information : ************************************************************************************** -
Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
Exemple:
Table1
Cliente name:
John
Client number:
12345
Survay number of negative answers:
3
Table2
Questions and answers that were negative:
Question: How much time where you waiting
Avaluation: 3 (from 1 to 10)
Answer: They only called me 1 mouth later
Can you please help me?Hi,
Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
References:
Subreports (Report Builder and SSRS)
Add a Subreport and Parameters (Report Builder and SSRS)
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
Reporting Services as a generic service in a failover cluster group?
There is some confusion on whether or not Microsoft will support a Reporting Services deployment on a failover cluster using scale-out, and adding the Reporting Services service as a generic service in a cluster group to achieve active-passive high
availability.
A deployment like this is described by Lukasz Pawlowski (Program Manager on the Reporting Services team) in this blog article
http://blogs.msdn.com/b/lukaszp/archive/2009/10/28/high-availability-frequently-asked-questions-about-failover-clustering-and-reporting-services.aspx. There it is stated that it can be done, and what needs to be considered when doing such a deployment.
This article (http://technet.microsoft.com/en-us/library/bb630402.aspx) on the other hand states: "Failover clustering is supported only for the report server database; you
cannot run the Report Server service as part of a failover cluster."
This is somewhat confusing to me. Can I expect to receive support from Microsoft for a setup like this?
Best Regards,
Peter WretmoHi Peter,
Thanks for your posting.
As Lukasz said in the
blog, failover clustering with SSRS is possible. However, during the failover there is some time during which users will receive errors when accessing SSRS since the network names will resolve to a computer where the SSRS service is in the process of starting.
Besides, there are several considerations and manual steps involved on your part before configuring the failover clustering with SSRS service:
Impact on other applications that share the SQL Server. One common idea is to put SSRS in the same cluster group as SQL Server. If SQL Server is hosting multiple application databases, other than just the SSRS databases, a failure in SSRS may cause
a significant failover impact to the entire environment.
SSRS fails over independently of SQL Server.
If SSRS is running, it is going to do work on behalf of the overall deployment so it will be Active. To make SSRS Passive is to stop the SSRS service on all passive cluster nodes.
So, SSRS is designed to achieve High Availability through the Scale-Out deployment. Though a failover clustered SSRS deployment is achievable, it is not the best option for achieving High Availability with Reporting Services.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Reporting Services username and password prompting
We have several branch office locations and one reporting services server. All of the branch office locations can access the reporting services server, but we have one location for the passed week, each time they make a connection to this server, it prompts
them for a username and password and will not allow them to connect even if the correct username and password is correct.
I have tried adding the server to the IE intranet/trusted site list. Set IE security on all zones to automatically logon with current username and password.
What is strange is that this is the only branch office site that is having this issue. It is almost like kerberos is broken for this site location only.
DOes anyone has any suggestions what could be causing this problem for all computers in this one location. Nothing has changed on their local servers nor have we pushed any updates to the machines.Hi bubba1984,
As per my understanding, I think this issue is caused by Kerberos authentication. Kerberos is an authentication protocol that allows clients that create authentication tokens to associate a specific destination to that token. In the failure case, there is
a mismatch between the destination specified in the token and the report server process configuration. Due to this mismatch, the underlying Kerberos authentication scheme supported by Windows prevents report server from authenticating the user.
To fix this issue, please try to remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file. For more details, please take the following article as reference:
http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to Convert MM/DD/YYYY to YYYY/MM/DD in SQL Reporting Services
i am having difficulty of converting a parameter field, called @startdate, on sql reporting services report to YYYY/MM/DD format. the parameter @Startdate was set to Data/Time. @Startdate is 6/1/2014 12:00:00 and I want to convert it
to 2014/06/01. I want to compare @Startdate with a column in database called Begindate which is in format of YYYY/MM/DD hh:mm:ss. I tried the followings
select * from Atable where cast(Atable.Begindate as date) >= cast(@Startdate as date)
select * from Atable where cast(Atable.Begindate as date >= cast(convert(datetime, @Startdate) as date)
SQL Reporting Services only gives me Text, Boolean, Date/Time, Integer and Float.
Regards,Hi Elmucho,
Sorry for the delay. I tested with the sample data you provided, however everything works well in-house. Could you please creste a new report and check the result. Here are the steps I performed:
1. Create a table and insert the following data:
Name (varchar(50)) Begindate (datetime, not null)
Lastdate (datetime, not null)
bob
2008-01-01 08:08:08.000 2010-10-10
10:10:10.000
alice
2010-10-10 10:10:10.00 2011-11-11
11:11:11.000
smith
2011-11-11 11:11:11.00 2012-12-12
12:12:12.000
2. Open SQL Server Data Tools, create the data source and add the dataset with the below query:
SELECT Name, Begindate, Lastdate
FROM [tablename ]
WHERE (CAST(Begindate AS date) >= CAST(@Startdate AS date)) AND (CAST(Lastdate AS date) <= CAST(@Enddate AS date))
3. Then, click execute button, it prompts for inputting the parameter value.
@Startdate
6/1/2008
@Enddate
5/1/2014
Enter the date and press OK.
4. Here is the result in the query designer:
Insert a table and fields. Save the report and preview:
Thanks.
Tracy Cai
TechNet Community Support -
Hello,
We are experiencing some issues with SharePoint 2013 which is driving me insane.
We have a deployment with two SQL Servers (HA groups) and four SharePoint servers: 2 Application servers, and 2 Web FrontEnd servers.
We installed SSRS for SharePoint in both application servers. The disc I have used is the MSDN image of SQL Enterprise 2012 w/ SP2.
ISO name: en_sql_server_2012_enterprise_edition_with_service_pack_2_x64_dvd_4685849.iso
MD5: 003e14c55fa648ad15f8be1e2439bd06
The installation completes without any problems. We can start the SSRS SharePoint Service in the first application server without any issues. However when we try to start the second one, we get the following error:
Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the sql reporting services service in the farm. The SQL Server Reporting Services cannot be started on
this server unless it is stopped on all other servers in the farm.
Now I am at a loss here. As I mentioned, we have used an image of SQL Server Enterprise. This is the same image we used on other environment, which worked as expected (we got no such error).
I have included the text related to the correlation error from the SP logs below.
Has anyone ever seen this issue before? Very, very strange!
Regards,
P.
01/29/2015 14:13:26.22 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:http://spap-01:5555/_admin/Server.aspx?ServerId=7f7d5eec-3791-44cf-a992-673eaea90f48) 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.22 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.22 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.22 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostAuthenticateRequestHandler). Execution Time=9.742 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.28 w3wp.exe (0x0B94) 0x294C SharePoint Foundation General 6t8h High [Forced due to logging gap, cached @ 01/29/2015 14:13:26.23, Original Level: Verbose] {0} 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.28 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Web Controls 88wu High [Forced due to logging gap, Original Level: Verbose] SPGridView.OnRowCreated() - Row.RowType={0}, .RowState={1}, .RowIndex={2}, .DataItemIndex={3} 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.37 w3wp.exe (0x0B94) 0x294C SharePoint Foundation General af4yd High [Forced due to logging gap, cached @ 01/29/2015 14:13:26.28, Original Level: Verbose] TenantAppEtag record requested but there is no sitesubscription or tenantId for site {0} so we will use the WebApp Id for the cache. 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.37 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Asp Runtime aj1kp High [Forced due to logging gap, Original Level: Verbose] SPRequestModule.PreSendRequestHeaders 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.43 OWSTIMER.EXE (0x1F10) 0x0B40 SharePoint Foundation Health abire Medium Failed to Sql Query data XEvent collector on sql-01. The error is Object reference not set to an instance of an object.
01/29/2015 14:13:26.51 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Topology 7034 Critical An attempt to start/stop instance of service Microsoft SQL Server Reporting Services Shared Service on server SPAP-01 did not succeed. Re-run the action via UI or command line on the specified server. Additional information is below. Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the SQL Server Reporting Services Service in the farm. The SQL Server Reporting Services service cannot be started on this server unless it is stopped on all other servers in the farm. 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.53 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Database ahjqp High [Forced due to logging gap, cached @ 01/29/2015 14:13:26.40, Original Level: Verbose] SQL connection time: 0.0821 for Data Source=sql-01;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][SharePoint_Config] 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.53 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Topology 88b9 High [Forced due to logging gap, Original Level: Verbose] Determining if the current user is a SharePoint Farm Administrator 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.53 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Topology 8xqz Medium Updating SPPersistedObject ReportingWebServiceInstance. Version: 1118292 Ensure: False, HashCode: 52212853, Id: 5a4058b9-2ecd-421e-b9ae-818bbc57c8c6, Stack: at Microsoft.SharePoint.ApplicationPages.ServerPage.OnObjectModelAction(Object sender, ObjectModelActionEventArgs e) at Microsoft.SharePoint.WebControls.ActionLinkDataSourceControl.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.79 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Database ahjqp High [Forced due to logging gap, cached @ 01/29/2015 14:13:26.57, Original Level: Verbose] SQL connection time: 0.0965 for Data Source=sql-01;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][SharePoint_Config] 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.79 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.86 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Topology 88ch High [Forced due to logging gap, cached @ 01/29/2015 14:13:26.84, Original Level: Verbose] {0} 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.86 w3wp.exe (0x0B94) 0x294C SharePoint Foundation General 8nca Medium Application error when access /_admin/Server.aspx, Error=Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the SQL Server Reporting Services Service in the farm. The SQL Server Reporting Services service cannot be started on this server unless it is stopped on all other servers in the farm. at Microsoft.ReportingServices.SharePoint.SharedService.Service.ReportingWebServiceInstance.Provision() at Microsoft.SharePoint.ApplicationPages.ServerPage.OnObjectModelAction(Object sender, ObjectModelActionEventArgs e) at Microsoft.SharePoint.WebControls.ActionLinkDataSourceControl.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.87 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Runtime tkau Unexpected System.InvalidOperationException: Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the SQL Server Reporting Services Service in the farm. The SQL Server Reporting Services service cannot be started on this server unless it is stopped on all other servers in the farm. at Microsoft.ReportingServices.SharePoint.SharedService.Service.ReportingWebServiceInstance.Provision() at Microsoft.SharePoint.ApplicationPages.ServerPage.OnObjectModelAction(Object sender, ObjectModelActionEventArgs e) at Microsoft.SharePoint.WebControls.ActionLinkDataSourceControl.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.89 w3wp.exe (0x0B94) 0x294C SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.InvalidOperationException: Reporting Services scale-out deployment is not supported in this edition of Reporting Services. This edition only supports one instance of the SQL Server Reporting Services Service in the farm. The SQL Server Reporting Services service cannot be started on this server unless it is stopped on all other servers in the farm. at Microsoft.ReportingServices.SharePoint.SharedService.Service.ReportingWebServiceInstance.Provision() at Microsoft.SharePoint.ApplicationPages.ServerPage.OnObjectModelAction(Object sender, ObjectModelActionEventArgs e) at Microsoft.SharePoint.WebControls.ActionLinkDataSourceControl.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.92 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq,2 agb9s,9 b4ly,309 8xqz,331 8nca,15 tkau,8 ajlz0 6f83e49c-cc03-d049-90f4-81439b542cf8
01/29/2015 14:13:26.92 w3wp.exe (0x0B94) 0x294C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://spap-01:5555/_admin/Server.aspx?ServerId=7f7d5eec-3791-44cf-a992-673eaea90f48)). Execution Time=712.2145 6f83e49c-cc03-d049-90f4-81439b542cf8Hi Wynn,
I appreciate your attempt to address my concerns, but even your reply seems to ignore the fact that I have not only provided the name of the ISO, but the MD5 checksum of the ISO as well. Also this is the first time I am being asked to double-check the version
of SSRS. The first reply I got to my query simply disregarded the version mismatch.
As per your request, I have checked under the folder you have specified (C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\WebServices\LogFiles), but unfortunately there are no files under this folder in neither of my two application
servers.
We only have logfiles under C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS
Is there a way I can turn those logs on?
In the meantime, we run the SQL Server Discovery tool and I have attached the summary for you to see that it finds the Enterprise Edition of SQL Server:
Final result: Passed
Exit code (Decimal): 0
Start time: 2015-01-29 15:17:44
End time: 2015-01-29 15:17:56
Requested action: RunDiscovery
Machine Properties:
Machine name: SP-AP-02
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered Configured
SQL Server 2012 Management Tools - Basic 1033 Enterprise Edition 11.2.5058.0 No Yes
SQL Server 2012 Reporting Services - SharePoint 11.2.5058.0 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation edition:
User Input Settings:
ACTION: RunDiscovery
CONFIGURATIONFILE:
ENU: true
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
QUIET: false
QUIETSIMPLE: false
UIMODE: Normal
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150129_151743\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
The \Setup Bootstrap\Log folder also has several log files that indicates the version of SQL Server that has been installed. For instance here is an entry of the Detail.txt file:
(01) 2015-01-28 19:10:27 Slp: -- SkuPublicConfigObject : CreateSKUCookie succeeded, new checksum is 195 bytes.
(01) 2015-01-28 19:10:27 Slp: -- SkuPublicConfigObject : Updated skuCheckSumInfo -> daysLeft=0 sqlEdition='ENTERPRISE' (0x6B9471A8) fileTimeInstalled=0 timeBombValue=0 editionType='Enterprise Edition' edition='Enterprise Edition' writeEditionStrings='True' checkSum=195bytes
(01) 2015-01-28 19:10:27 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
I hope this help while we don't have any logfiles in the folder you asked me to look into. Please advise me as in how to proceed if logfiles must be generated.
Regards,
P. -
Hi fellas,
I'm facing some serious issues with SSRS. I've tried to create a map report in SQL server reporting service 2008R2. I've insert a map using ESRI shapefile and connected it to my Dataset. Everything seemed to be fine up until I've tried to preview the results
and I got this:
I've tried to resolve the problem by increasing the "MaximumTotalPc", but then I got this:
Ever since this happened my SSRS is acting like it has gotten a virus. I've tried to delete the report, but it doesn't let me and the window I've posted above keeps on popping up every few seconds while the program is open.
Any idea why do I get it and how can I deal with it?
P.S. I'm not any kind of developer and I'm not really familiar with the technical language. I need an explanation written in user friendly language, please :-)Hi Ellie55,
According to your description that you are experiencing the issue when you are creating the ESRI shapefile map on the SSRS 2008 R2, you got some error “the number of map point elements for “Map1” exceeds the maximum limits for map” when you click to
preview the map, you trying to set the properties of “MaximumTotalPointCount” to fix this issue but cause another error about the “insufficient memory”, right?
By default, a map can have 20,000 map elements or 1,000,000 points. If your map exceeds these limits, you can increase the MaximumTotalPointCount and the MaximumSpatialElementCount, but it may cause the insufficient memory because of the too much points
and elements. So I recommend you that you can use one of the following approaches for you have got problem increase the limitations:
Remove a layer.
Decrease the map resolution.
Decrease the map viewport coordinates to view a smaller area.
If the spatial data comes from a report dataset, set a filter to limit the data from the dataset. The filter must be set on a field that is not a spatial data type.
If the spatial data comes from a SQL Server database, change the query to use spatial functions to limit the data to a smaller area.
Details information for your reference :
http://prashantmishrasblog.blogspot.com/2012/10/using-map-in-ssrs-reports-part1.html
http://msdn.microsoft.com/en-us/library/ee240843.aspx
As you this error also caused you can’t delete the report, please try to close the program in the task manager and find the path of project in your computer to delete the .rdl file in your workspace and redesign the map again.
Any problem, please feel free to ask
Regards
Vicky Liu -
Unable to login to Report Service on Windows 2008 R2 server
I have reporting services installed on a Windows 2008 R2 server, When I make and RDP connection to the server and go to http://servername/Reports everything works fine. When I try to connect from another client to the web service, it asks for username and
password. it fails 3 times and the shows a blank page.
When I see the Event Viewer in the server (Windows Logs --> Security, I can see an Audit Failure:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 9/4/2014 11:46:25 AM
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: MI-SWACO-DB.houston.livequest.net
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: Administrator
Account Domain: HOUSTONLQ
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000035b
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: MI-SWACO3
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>4625</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>12544</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2014-09-04T16:46:25.247229500Z" />
<EventRecordID>8917</EventRecordID>
<Correlation />
<Execution ProcessID="504" ThreadID="1344" />
<Channel>Security</Channel>
<Computer>MI-SWACO-DB.houston.livequest.net</Computer>
<Security />
</System>
<EventData>
<Data Name="SubjectUserSid">S-1-0-0</Data>
<Data Name="SubjectUserName">-</Data>
<Data Name="SubjectDomainName">-</Data>
<Data Name="SubjectLogonId">0x0</Data>
<Data Name="TargetUserSid">S-1-0-0</Data>
<Data Name="TargetUserName">Administrator</Data>
<Data Name="TargetDomainName">HOUSTONLQ</Data>
<Data Name="Status">0xc000035b</Data>
<Data Name="FailureReason">%%2304</Data>
<Data Name="SubStatus">0x0</Data>
<Data Name="LogonType">3</Data>
<Data Name="LogonProcessName">
</Data>
<Data Name="AuthenticationPackageName">NTLM</Data>
<Data Name="WorkstationName">MI-SWACO3</Data>
<Data Name="TransmittedServices">-</Data>
<Data Name="LmPackageName">-</Data>
<Data Name="KeyLength">0</Data>
<Data Name="ProcessId">0x0</Data>
<Data Name="ProcessName">-</Data>
<Data Name="IpAddress">-</Data>
<Data Name="IpPort">-</Data>
</EventData>
</Event>
The firewall is OFF in both client and server.
I saw a similar question and the answer is related to firewall which is not may case.Hi Mario,
According to your description, when you try to access the Report Manager in another client, a login dialog prompt. After typing a valid username and password 3 times, a blank page displays.
Generally, the issue is always caused by the Report Server is configured to use Kerberos authentication, while the Service Principal Name(SPN) is not configured correctly. To fix this issue, please refer to the following methods:
Register an SPN for the Report Server service under the domain user account.
Change the service account to run under a built-in account such as Network Service.
Remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file.
Besides, the issue can also be caused by the Internet Explorer (IE) didn't pass the user's credential to the Report Server automatically or the IE is not Windows Integrated enabled. For more detail steps about how to address this issue, please refer to the
following steps:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/184c4f6c-b292-4f9a-beca-80b70f4392fe/report-manager-prompts-3-or-4-times-for-usernamepassword-before-letting-users-in?forum=sqlreportingservices
Reference:
Resolving Kerberos Authentication Errors When Connecting to a Report Server
Solving the Reporting Services Login issue in the February CTP of SQL Server 2008
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Hi Team,
We have reporting services and sharepoint 2010 installed on one server and DB(Sql server2008 R2 )server installed on another machine. But we are unable to configure reporting(SSRS) on the web(sharepoint)server. Is there any similar configuration
done on any of your environments and can you please suggest us the workround/resolution.
Regards,
Sobha MuyidaHi ,
Iam unable to insert the image/error screenshot here as I have created the account yesterday which throws me email verification error. Though , I have given the error details above. Please suggest accordingly. PFB the details again :
while building OLAP cube, we are facing below errors with build failure. And DB server is running fine.
===== Initiating OLAP database build process =====
[6/10/2014 12:03 PM] Cube build request message has been added to the Project Server queue
===== Verifying and running pre-build server event handler =====
[6/10/2014 12:04 PM] Verifying and running pre-build server event handler
===== Determining database and OLAP database structure =====
[6/10/2014 12:04 PM] Cube build initialization started
[6/10/2014 12:04 PM] OLAP database and cube structure was determined successfully
===== Building database and cubes =====
[6/10/2014 12:04 PM] Cube build session started
===== Process Completed =====
[6/10/2014 12:04 PM] Failed to build the OLAP cubes. Error: Failed to connect to the Analysis Services server ServerName. Error: A connection cannot be made. Ensure that the server is running.
Regards,
Sobha -
Reporting Services Service acting strangely
Whenever I start the SQL Reporting Services Service, the service starts successfully, but immediately logs three failed login attempts in the security event log. The audit failure reports this:
An account failed to log on.
Subject:
Security ID: [domain]\[authorized service account]
Account Name: [authorized service account]
Account Domain: [domain]
Logon ID: 0x19a662b7
Logon Type: 2
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: [owner of reporting services database; different from service account above]
Account Domain: [domain]
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc000006a
Process Information:
Caller Process ID: 0x508
Caller Process Name: D:\MSRS10_50.ORCHESTRATE_PROD\Reporting Services\ReportServer\bin\ReportingServicesService.exe
Network Information:
Workstation Name: [SQL Server]
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process: Advapi
Authentication Package: Negotiate
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
The SQL Server log reports this:
Date 1/24/2014 10:40:05 AM
Log SQL Server (Current - 1/24/2014 10:00:00 AM)
Source Logon
Message
Login failed for user '[domain]\[authorized service account]'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>]
I don't even know where to start on this. Reporting services and replication were working fine before the vendor started poking around. I don't know what (if anything) they changed. The logs show that the ReportService database and the
ReportServicesTempDB had indices restored just before the error started showing up.
Help?Hi goodros_nemesis,
If you’re getting a login failed for your Windows user which you’re sure you put in the sysadmins role. And based on the error message “Login failed for user '[domain]\[authorized service account]'. Reason: Token-based server access validation failed with
an infrastructure error. Check for previous errors. [CLIENT: <local machine>]”, it’s probably because UAC isn’t passing all your group memberships to SSMS when you run it, and therefore giving you access denied.
To fix this issue, please try right clicking and running as administrator and seeing if it goes away. Of course if we added our user explicitly we’re probably fine, but just to get a cluster up and running. We can add domain admins user to the DB, and of
course that’s a membership that UAC will mask.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Migrating SQL Reporting Services error
Hi I followed this
technet documentation for migrating the reporting services database and temp database to a new server.
I got the error here below ... what i was trying to do is create a new folder however it's throwing out an error and not letting me do this .... any idea how i can fix this ? not sure why it's trying to access our "smam_apps" database since it's
pretty much is an LOB database that has nothing to do with SQL Server Reporting services
System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException:
An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. ---> System.Data.SqlClient.SqlException: Could not find server 'smam_apps' in sys.servers. Verify that
the correct server name was specified. If necessary, execute the stored procedure sp_addlinkedserver to add the server to sys.servers.
at Microsoft.ReportingServices.Library.ReportingService2010Impl.CreateFolder(String Folder, String Parent, Property[] Properties, CatalogItem& ItemInfo)
at Microsoft.ReportingServices.WebServer.ReportingService2010.CreateFolder(String Folder, String Parent, Property[] Properties, CatalogItem& ItemInfo) at Microsoft.ReportingServices.UI.BaseProperties.ApplyChanges() at
Microsoft.ReportingServices.UI.BaseApplyPage.ApplyBtn_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-3!2af8!03/24/2014-11:37:36:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!1bc8!03/24/2014-11:37:36:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
eddy.aHi
the issue here is that one of the developers altered the procedure dbo.CreateObject proc which prevented the report manager from uploading (creating ) new reports to
SQL Server .
I restored the proc from another SSRS SQL Reporting Server and it fixed the issue.
thanks
ed
eddy.a
Maybe you are looking for
-
I have a new computer, with some new music on it in my Itunes Library. How do I put that new music from here onto my existing ipod (which has a ~1500 song library from an old computer which is no longer accesible, and which music I do not want to er
-
How assign ABAP programs & T codes to auth groups R3 4.71, oracle 9.2.0.7
Hi Experts, How to assign ABAP programs and customized transactions to authorization groups. R3 4.71, oracle 9.2.0.7, Sun Solaris. Can some one help me... Thanks in advance. . .
-
Publishing portal service as Web Service !!
Environment : EP 6.0 Sp2 on J2EE 6.20. Is there a way to publish web service for existing portal services ??
-
Failed to send batch after max errors - Snapshot
I have been replicating happily between 2008 R2 SQL Servers for some time using Transactional replication. Replication stopped yesterday with the following messages on the source server: MSSQL_ENG 10054 Communication link failure MSSQL_ENG 10054 TCP
-
How do i know if my macbook pro hard drive is working properly
hello guys yes im just curious my mac is working fine but im wondering does installing and removing bootcamp can damage the hard drive or turn it off pressing the power bottom? how to take care of the hard drive or what are the signal of a failing