Reprovision AMT Computers in Detected Status

I am new to AMT ,trying to re-provision computers sitting in SCCM2012 R2 . AMT has been setup by someone earlier.
Tried to check on Certificate authority settings appear right as per our domain admin
We have AMT collection and detection query set up for Provisioned, Detected 
I verified security groups for AMT and permissions
Is their a simple way to re-provision computer from Detected status.
I tried run Discover AMT status on client in Manage Out of band.
Could you please advise steps to provision computers in AMT and any logs I can check
Requesting assistance..
RJ
RJ09

Thanks Peter for replying quickly..
I have followed this and verified all security settings and permissions.
I can access Manage Out of Band>Power Control and Power On/Off and restart pc
But Out of Band Manager Console doesn't work. 
Under Tools> Serial over LAN connection is greyed out.
Status at botom shows: System: Disconnected, IDE-Re-direct and Serial Connection: Inactive
I have tried Tools>Options> connecting using PC ANSI and VT-100
I checked oobmgmt.log on various client machines and got following error
CAMTProvisionEndpoint::GetProvisionSettings: GetObject() failed: 80041002
!! AutoProvision policy disabled.
END
ON SCHEDULE
BEGIN
CAMTProvisionEndpoint::GetProvisionSettings: GetObject() failed: 80041002
For Device Collection I have Provisioning for AMT-based computers checked on Out of band management
Advise please..
RJ09

Similar Messages

  • AMT - device in 'detected' status

    Hello everyone,
    I'm trying to get Out of Band working, and the one machine that I'm testing for this purpose seems to be stuck at 'detected' status. I gone over the configuration steps twice, but I can't seem to pinpoint what I've missed.
    Here's the log from amtopmgr.log file (this portion of the log is when I perform a "Discover AMT Status" task.
    Being my first time trying to get Out of Band working, I really don't know where to start my troubleshooting efforts here.
    ==============
    AMT Discovery Worker: Wakes up to process instruction files
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Wait 3600 seconds...
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Wakes up to process instruction files
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Reading Discovery Instruction C:\Program Files\Microsoft Configuration Manager\inboxes\amtopmgr.box\disc\{7D90B636-860E-4509-9101-748A98871927}.RDC...
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Execute query exec AMT_GetThisSitesNetBiosNames NULL, '16777231', 'LAB'
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: CSMSAMTDiscoveryWorker::RetrieveInfoFromResource - Found machine X1212 (X1212.GLLAB2.COM), ID: 16777231 IP: 172.16.16.69 from Resource 16777231.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Execute query exec AMT_GetAMTMachineProperties 16777231
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    Discovery will use ip resolved from netbios:
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    172.16.16.69 SMS_AMT_OPERATION_MANAGER
    12/13/2011 1:53:47 PM 4528 (0x11B0)
    AMT Discovery Worker: Execute query exec AMT_GetProvAccounts
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Finish reading discovery instruction C:\Program Files\Microsoft Configuration Manager\inboxes\amtopmgr.box\disc\{7D90B636-860E-4509-9101-748A98871927}.RDC
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Parsed 1 instruction files
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Send task X1212.GLLAB2.COM to completion port
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    General Worker Thread Pool: Current size of the thread pool is 1
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: 1 task(s) are sent to the task pool successfully.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    STATMSG: ID=7203 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=SCCM2012-RC1.GLLAB2.COM SITE=LAB PID=2256 TID=4528 GMTDATE=Tue Dec 13 18:53:47.749 2011 ISTR0="1" ISTR1="0" ISTR2="0" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
    ISTR9="" NUMATTRS=0 SMS_AMT_OPERATION_MANAGER
    12/13/2011 1:53:47 PM 4528 (0x11B0)
    AMT Discovery Worker: There are 1 tasks in pending list
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Wait 20 seconds...
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Wakes up to process instruction files
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: There are 1 tasks in pending list
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    AMT Discovery Worker: Wait 20 seconds...
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    4528 (0x11B0)
    General Worker Thread Pool: Work thread 3188 started
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    3188 (0x0C74)
    Discover X1212 using IP address 172.16.16.69
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    3188 (0x0C74)
    DoPingDiscoveryForAMTDevice succeeded. SMS_AMT_OPERATION_MANAGER
    12/13/2011 1:53:47 PM 3188 (0x0C74)
    Error 0x80090325 returned by InitializeSecurityContext during follow up TLS handshaking with server.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    3188 (0x0C74)
    **** Error 0x2040b350 returned by ApplyControlToken
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    3188 (0x0C74)
    DoSoapDiscovery failed with user name: admin.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:47 PM
    3188 (0x0C74)
    Error 0x80090325 returned by InitializeSecurityContext during follow up TLS handshaking with server.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    **** Error 0x2040b350 returned by ApplyControlToken
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    DoSoapDiscovery failed with user name: admin.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Flag iWSManFlagSkipRevocationCheck is not set.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    session params : https://X1212.GLLAB2.COM:16993   ,  11001
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    ERROR: Invoke(get) failed: 80020009argNum = 0
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Description: The I/O operation has been aborted because of either a thread exit or an application request.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Error: Failed to get AMT_SetupAndConfigurationService instance.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    DoWSManDiscovery failed with user name: admin.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Flag iWSManFlagSkipRevocationCheck is not set.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    session params : https://X1212.GLLAB2.COM:16993   ,  11001
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    ERROR: Invoke(get) failed: 80020009argNum = 0
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Description: The I/O operation has been aborted because of either a thread exit or an application request.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Error: Failed to get AMT_SetupAndConfigurationService instance.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    DoWSManDiscovery failed with user name: admin.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Start Kerberos Discovery SMS_AMT_OPERATION_MANAGER
    12/13/2011 1:53:48 PM 3188 (0x0C74)
    Flag iWSManFlagSkipRevocationCheck is not set.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    session params : https://X1212.GLLAB2.COM:16993   ,  484001
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    ERROR: Invoke(get) failed: 80020009argNum = 0
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Description: The I/O operation has been aborted because of either a thread exit or an application request.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Error: Failed to get AMT_SetupAndConfigurationService instance.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    DoKerberosWSManDiscovery failed. SMS_AMT_OPERATION_MANAGER
    12/13/2011 1:53:48 PM 3188 (0x0C74)
    Flag iWSManFlagSkipRevocationCheck is not set.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    session params : https://172.16.16.69:16993   ,  15001
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    ERROR: Invoke(get) failed: 80020009argNum = 0
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Description: The I/O operation has been aborted because of either a thread exit or an application request.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Error: Failed to get AMT_SetupAndConfigurationService instance.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    DoWSManDiscovery failed with user name: admin.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Flag iWSManFlagSkipRevocationCheck is not set.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    session params : https://172.16.16.69:16993   ,  15001
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    ERROR: Invoke(get) failed: 80020009argNum = 0
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Description: The I/O operation has been aborted because of either a thread exit or an application request.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Error: Failed to get AMT_SetupAndConfigurationService instance.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    DoWSManDiscovery failed with user name: admin.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    Discovery to IP address 172.16.16.69 succeed. AMT status is 1.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    CSMSAMTDiscoveryTask::Execute, discovery to X1212 succeed. AMT status is 1.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    CSMSAMTDiscoveryTask::Execute - DDR written to C:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=10 MUF=0 PCNT=1, P1='X1212.GLLAB2.COM' P2='' P3='' P4='' P5=''
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    CStateMsgReporter::DeliverMessages - Created state message file: C:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\r6k9m27y.SMX
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    General Worker Thread Pool: Succeed to run the task X1212.GLLAB2.COM. Remove it from task list.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    General Worker Thread Pool: Work thread 3188 has been requested to shut down.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    General Worker Thread Pool: Work thread 3188 exiting.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    3188 (0x0C74)
    General Worker Thread Pool: Current size of the thread pool is 0
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:53:48 PM
    2864 (0x0B30)
    AMT Discovery Worker: Wakes up to process instruction files
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:54:07 PM
    4528 (0x11B0)
    AMT Discovery Worker: Wait 3600 seconds...
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:54:07 PM
    4528 (0x11B0)
    AMT Maintenance Worker: Wakes up to process instruction files
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:59:50 PM
    2808 (0x0AF8)
    AMT Maintenance Worker: Wait 3600 seconds...
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:59:50 PM
    2808 (0x0AF8)
    AMT Operation Worker: Wakes up to process instruction files
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:59:50 PM
    1396 (0x0574)
    AMT Operation Worker: Wait 3600 seconds...
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:59:50 PM
    1396 (0x0574)
    AMT WOL Worker: Wakes up to process instruction files
    SMS_AMT_OPERATION_MANAGER 12/13/2011 1:59:50 PM
    3848 (0x0F08)
    AMT WOL Worker: Wait 3600 seconds... SMS_AMT_OPERATION_MANAGER
    12/13/2011 1:59:50 PM 3848 (0x0F08)
    Succeed to add new health check task to pending list.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    6128 (0x17F0)
    AMT Provision Worker: Wakes up to process instruction files
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    6128 (0x17F0)
    AMT Provision Worker: Send task  to completion port
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    6128 (0x17F0)
    General Worker Thread Pool: Current size of the thread pool is 1
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    6128 (0x17F0)
    AMT Provision Worker: 1 task(s) are sent to the task pool successfully.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    6128 (0x17F0)
    General Worker Thread Pool: Work thread 4952 started
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    4952 (0x1358)
    Test https://SCCM2012-RC1.GLLAB2.COM:443/EnrollmentService/AmtEnrollmentService.svc
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    4952 (0x1358)
    [EnrollmentWrapper]: SCCMCertCredentials - finding self signed sms cert by thumbprint
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    4952 (0x1358)
    [EnrollmentWrapper]: FindCertificate - finding in LocalMachine, store Sms, find type FindByThumbprint, validOnly = False
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    4952 (0x1358)
    [EnrollmentWrapper]: FindCertificate - there are 6 certs in the specified store
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    4952 (0x1358)
    [EnrollmentWrapper]: FindCertificate - Found certs via FindByThumbprint, count = 1
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    4952 (0x1358)
    [EnrollmentWrapper]: FindCertificate - cert[0].FriendlyName = Site System Identification Certificate
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    4952 (0x1358)
    [EnrollmentWrapper]: FindCertificate - cert[0].Subject = CN=Site System Identification
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    4952 (0x1358)
    [EnrollmentWrapper]: FindCertificate - cert[0].Issuer = CN=Site System Identification
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    4952 (0x1358)
    STATMSG: ID=7203 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=SCCM2012-RC1.GLLAB2.COM SITE=LAB PID=2256 TID=6128 GMTDATE=Tue Dec 13 19:07:12.175 2011 ISTR0="1" ISTR1="0" ISTR2="0" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
    ISTR9="" NUMATTRS=0 SMS_AMT_OPERATION_MANAGER
    12/13/2011 2:07:12 PM 6128 (0x17F0)
    AMT Provision Worker: There are 1 tasks in pending list
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    6128 (0x17F0)
    AMT Provision Worker: Wait 20 seconds...
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:12 PM
    6128 (0x17F0)
    TestEnrollmentService succeed. SMS_AMT_OPERATION_MANAGER
    12/13/2011 2:07:27 PM 4952 (0x1358)
    STATMSG: ID=7220 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=SCCM2012-RC1.GLLAB2.COM SITE=LAB PID=2256 TID=4952 GMTDATE=Tue Dec 13 19:07:27.783 2011 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
    ISTR9="" NUMATTRS=0 SMS_AMT_OPERATION_MANAGER
    12/13/2011 2:07:27 PM 4952 (0x1358)
    General Worker Thread Pool: Succeed to run the task . Remove it from task list.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:27 PM
    4952 (0x1358)
    General Worker Thread Pool: Work thread 4952 has been requested to shut down.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:27 PM
    4952 (0x1358)
    General Worker Thread Pool: Work thread 4952 exiting.
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:27 PM
    4952 (0x1358)
    General Worker Thread Pool: Current size of the thread pool is 0
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:27 PM
    2864 (0x0B30)
    AMT Provision Worker: Wakes up to process instruction files
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:32 PM
    6128 (0x17F0)
    AMT Provision Worker: Wait 3600 seconds...
    SMS_AMT_OPERATION_MANAGER 12/13/2011 2:07:32 PM
    6128 (0x17F0)
    =============
    Here's a portion of the client's oobmgmt.log file:
    BEGIN oobmgmt
    12/13/2011 12:16:33 PM 1076 (0x0434)
    Retrying to activate the device. oobmgmt
    12/13/2011 12:16:33 PM 1076 (0x0434)
    Get CoreVersion: 7.1.20 oobmgmt
    12/13/2011 12:16:33 PM 1076 (0x0434)
    New OTP generated oobmgmt
    12/13/2011 12:16:33 PM 1076 (0x0434)
    This version supports wireless. oobmgmt
    12/13/2011 12:16:33 PM 1076 (0x0434)
    Get wired ip: 172.16.16.69 oobmgmt
    12/13/2011 12:16:33 PM 1076 (0x0434)
    Raising event:
    [SMS_CodePage(437), SMS_LocaleID(1033)]
    instance of SMS_OOBMgmt_StartConfig_Success
    ClientID = "GUID:00189f1a-de20-4ca4-b2d1-42a5d370e423";
    ConfigurationStartTime = "2011-12-13 12:16:34";
    DateTime = "20111213171634.066000+000";
    MachineName = "X1212";
    ProcessID = 2312;
    SiteCode = "LAB";
    ThreadID = 1076;
    oobmgmt
    12/13/2011 12:16:34 PM 1076 (0x0434)
    Successfully activated the device. oobmgmt
    12/13/2011 12:16:34 PM 1076 (0x0434)
    END oobmgmt
    12/13/2011 12:16:34 PM 1076 (0x0434)
    ON SCHEDULE OOBMgmt
    12/13/2011 1:16:33 PM 1300 (0x0514)
    BEGIN oobmgmt
    12/13/2011 1:16:33 PM 1300 (0x0514)
    Retrying to activate the device. oobmgmt
    12/13/2011 1:16:33 PM 1300 (0x0514)
    Get CoreVersion: 7.1.20 oobmgmt
    12/13/2011 1:16:33 PM 1300 (0x0514)
    Resending last OTP oobmgmt
    12/13/2011 1:16:33 PM 1300 (0x0514)
    This version supports wireless. oobmgmt
    12/13/2011 1:16:33 PM 1300 (0x0514)
    Get wired ip: 172.16.16.69 oobmgmt
    12/13/2011 1:16:33 PM 1300 (0x0514)
    Successfully activated the device. oobmgmt
    12/13/2011 1:16:33 PM 1300 (0x0514)
    END oobmgmt
    12/13/2011 1:16:33 PM 1300 (0x0514)

    I made some changes on the desktop end - changed the MBEx password from 'admin' (which it was giving me errors as well), to my own password. I added this new user/password to SCCM, MEBx account configuration. I ran another 'Discover AMT Status' on the device;
    I review the logs (got the same errors as mentioned above), but this time I went to check the MBEx settings and I actually found some information in it that must have been setup by SCCM (see screenshot).
    That was my only change to the desktop (just a password change).

  • All computers showing no status, not yet reported!.

    I have reinstalled WSUS role on Server 2008 R2 , but it shows all computers with no status, ip address unknown, operating system Windows 0.0 , and not yet reported. I have installed it 7 days ago. I also installed kb2720211.   At download status it
    is downloading 9319 mb of 63256 mb (at this moment) . Do i have to wait till it finish downloading all updates and than thay will start replying or is any problem with WSUS ?
    1122

    A few questions here...
    Why did you destroy the content store when you uninstalled WSUS?
    Why are you downloading ==63GB== of files????? (How many updates did you approve???)
    Are any of the client systems Windows 8 or Windows Server 2012?
    Did you install KB2720211 before launching the synchronization or after? before approving the multitude of updates, or after?
    If it's showing NoStatus/NotYetReported for the clients, and the server has been online seven days (and still only downloaded =9GB=?), then you need to start by looking in a WindowsUpdate.log and see why the client(s) are failing to communicate with the
    WSUS server.
    My guess would be that the installation of KB2720211 did not complete successfully.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • How to void Life Events in Detected status

    Hi,
    There are lots of old Life Events in Detected status in the system. And recently the team terminated some employees who were not supposed to be in the system and that created around 3000 potential life events. Is there was way I can void all these Life Events that are there in Detected status?
    Thansk and Regards,
    Archana

    Hi,
    There are lots of old Life Events in Detected status in the system. And recently the team terminated some employees who were not supposed to be in the system and that created around 3000 potential life events. Is there was way I can void all these Life Events that are there in Detected status?
    Thansk and Regards,
    Archana

  • Reg: CLP Auto-Detect Status in customized Toolarea

    hi all,
    i've config'd clp, rtc and using the chat facility without any problems, i mean i can see online whn i set to auto-detect status. but i've problems whn i'm doing the same in customized toolarea(par). it takes me to offline whn i do auto-detect status in customized toolarea, so i can't use chatting now..
    wt cud be the problem & how i solve it?
    thanks,
    JB

    Hi
    Browse through following path System Administration--> System Configuration-> Knowledge Management -> Content Management-> Global Services--> Availability Status Service
    tick Active and
    In Default Availability Status setting: [select]Auto-Detect Status.
    Regards,
    Akshit Patel

  • Life Events Created for Dependents in Detected Status

    Hi! Please help me understand this.... When a life event (Ex: Ineligible Dependent) is processed for an employee to end the ineligible dependent coverage, a New Hire Life event is assigned in detected for the dependent. What is causing this and what should be changed to stop this. Thanks and Appreciate your help.
    Vamsee

    I made some changes on the desktop end - changed the MBEx password from 'admin' (which it was giving me errors as well), to my own password. I added this new user/password to SCCM, MEBx account configuration. I ran another 'Discover AMT Status' on the device;
    I review the logs (got the same errors as mentioned above), but this time I went to check the MBEx settings and I actually found some information in it that must have been setup by SCCM (see screenshot).
    That was my only change to the desktop (just a password change).

  • WRTS4G, computers not detecting wireless router

    On my main desktop I can connect to the internet (obviously), but when I try to detect the wireless router it doesn't detect it and my laptop won't connect either.  Up until yesterday I've been connected with no problems at all.
    I've reset the system, I've changed my pass phrase, I've unplugged, made sure cables are in, the only thing I haven't done is beat my wireless router with a hammer and I'm close.
    It picks up a signal when I am looking for wireless and I connect with "limited connectivity".
    Any insight would be appreciated!
    Thanks!
    Message Edited by AprilMayRD on 08-08-2008 07:05 AM

    It supposedly works and has no updates.  I bought a new wireless router today, a Linksys WRT31ON, still the same exact problem. 
    The main desktop has internet somehow, but the other computers can only have a limited connectivity.  I'm shelling out money for Geek Squad to come on Monday.  Does Linksys not have 1-800 numbers????????

  • WSUS (3.0 sp2 or 3.2.7600.226) computers not reporting status - on W2k8R2sp1 with error 8007efe

    Standard defaul WSUS install using all setup defaults.  (port 80)  no errors on server side app, sec or sys logs.  no iis logs.
    pasting the links below from the client into IE and they all get "internet explorer cannot display the web page"
    but the client windows update logs show:
    2014-01-08 13:20:34:835 1012 10b8 PT WARNING: Cached cookie has expired or new PID is available
    2014-01-08 13:20:34:835 1012 10b8 PT Initializing simple targeting cookie, clientId = fbca9f1e-f2ae-478a-a8a2-26ae0143d786, target group = , DNS name = workstation.domain.name
    2014-01-08 13:20:34:835 1012 10b8 PT   Server URL = http://
    server/SimpleAuthWebService/SimpleAuth.asmx
    2014-01-08 13:20:53:186 1012 10b8 Misc WARNING: Send failed with hr = 80072efe.
    2014-01-08 13:20:53:186 1012 10b8 Misc WARNING: SendRequest failed with hr = 80072efe. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2014-01-08 13:20:53:186 1012 10b8 PT   + Last proxy send request failed with hr = 0x80072EFE, HTTP status code = 0
    2014-01-08 13:20:53:186 1012 10b8 PT   + Caller provided credentials = No
    2014-01-08 13:20:53:186 1012 10b8 PT   + Impersonate flags = 0
    2014-01-08 13:20:53:186 1012 10b8 PT   + Possible authorization schemes used =
    2014-01-08 13:20:53:186 1012 10b8 PT WARNING: GetAuthorizationCookie failure, error = 0x80072EFE, soap client error = 5, soap error code = 0, HTTP status code = 200
    2014-01-08 13:20:53:186 1012 10b8 PT WARNING: Failed to initialize Simple Targeting Cookie: 0x80072efe
    2014-01-08 13:20:53:186 1012 10b8 PT WARNING: PopulateAuthCookies failed: 0x80072efe
    2014-01-08 13:20:53:186 1012 10b8 PT WARNING: RefreshCookie failed: 0x80072efe
    2014-01-08 13:20:53:186 1012 10b8 PT WARNING: RefreshPTState failed: 0x80072efe
    2014-01-08 13:20:53:186 1012 10b8 PT WARNING: PTError: 0x80072efe
    2014-01-08 13:20:53:186 1012 10b8 Report WARNING: Reporter failed to upload events with hr = 80072efe.
    2014-01-08 13:20:53:186 1012 10b8 Report WARNING: Discarding a batch of 1 events because they have expired.
    2014-01-08 13:20:53:217 1012 10b8 PT WARNING: Cached cookie has expired or new PID is available
    2014-01-08 13:20:53:217 1012 10b8 PT Initializing simple targeting cookie, clientId = fbca9f1e-f2ae-478a-a8a2-26ae0143d786, target group = , DNS name = workstation.domain.name
    2014-01-08 13:20:53:217 1012 10b8 PT   Server URL = http://
    server/SimpleAuthWebService/SimpleAuth.asmx
    2014-01-08 13:20:55:510 1012 10b8 Misc WARNING: Send failed with hr = 80072efe.
    2014-01-08 13:20:55:510 1012 10b8 Misc WARNING: SendRequest failed with hr = 80072efe. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2014-01-08 13:20:55:510 1012 10b8 PT   + Last proxy send request failed with hr = 0x80072EFE, HTTP status code = 0
    2014-01-08 13:20:55:510 1012 10b8 PT   + Caller provided credentials = No
    2014-01-08 13:20:55:510 1012 10b8 PT   + Impersonate flags = 0
    2014-01-08 13:20:55:510 1012 10b8 PT   + Possible authorization schemes used =
    2014-01-08 13:20:55:510 1012 10b8 PT WARNING: GetAuthorizationCookie failure, error = 0x80072EFE, soap client error = 5, soap error code = 0, HTTP status code = 200
    2014-01-08 13:20:55:510 1012 10b8 PT WARNING: Failed to initialize Simple Targeting Cookie: 0x80072efe
    2014-01-08 13:20:55:510 1012 10b8 PT WARNING: PopulateAuthCookies failed: 0x80072efe
    2014-01-08 13:20:55:510 1012 10b8 PT WARNING: RefreshCookie failed: 0x80072efe
    2014-01-08 13:20:55:510 1012 10b8 PT WARNING: RefreshPTState failed: 0x80072efe
    2014-01-08 13:20:55:510 1012 10b8 PT WARNING: PTError: 0x80072efe
    2014-01-08 13:20:55:510 1012 10b8 Report WARNING: Reporter failed to upload events with hr = 80072efe.
    Client diagnostic output show all pass except at:
    useWuserver is enabled .... pass the error message:
    VerifyWUServerURL() failed with hr=0x80072efe
    the connection with the server was terminated abnormally
    end
    any input is appreciated.  Many Thanks

    First, per the subject line, if your WSUS server really is still Build 226, then you need to patch it, and that would likely account for client connectivity issues.
    VerifyWUServerURL() failed with hr=0x80072efe
    Second, the 0x80072EFE error, specifically, is a connection aborted error.
    Something is breaking the connection between the client and the server. The client is not using a proxy server. Does it need to use a proxy server? Are there any other devices (routers, web filters, etc.) between this client and the WSUS server? Are they
    on the same IP Subnet?
    0x80072EFE
    -2147012866
    ERROR_INTERNET_CONNECTION_ABORTED
    The connection with the server has been terminated.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • OOB - AMT status is Detected

    Hello,
    I'm trying to configure Out of Band on System Center 2012 R2 Configuration Manager, after following what Microsoft publish on TechNet I couldn't provision any computers, the status was detected and not supported for some machines.
    I test on computers Lenovo T400 and Lenovo T430 and both giving me the same status : Detected.
    according to Microsoft Detected means: AMT capability is detected on this computer, but the out of band service point is unable to provision it for AMT. This scenario can occur when the computer has been previously provisioned for AMT outside the Configuration
    Manager site and the password for the AMT Remote Admin Account or the MEBx Account has been changed and is unknown.
    I don't think that those computers previously provisioned. Any one had this issue before ?
    Abduljalil Abolzahab

    Hi,
    Here is a lenovo document about Intel AMT OOB  for your reference.
    http://www.lenovo.com/images/products/server/pdfs/tech_resources/thinkserver_ts440_with_amt_tr.pdf
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Check Status of Bit Locker Encryption on all Computers on My Network

    I have encrypted all computers on my network with bit locker encryption.  However, for various reasons I know that there a few that are not encrypted.  Is there a tool I can use to check the encryption status of all the computers on my network?

    Hi,
    You can use MBAM to manage and monitor your computers bitlocer encryption status, please refer to the link below for more details:
    http://technet.microsoft.com/en-us/windows/hh826072.aspx
    Roger Lu
    TechNet Community Support

  • Update status is incorrect

    When I run update status reports, some computers show "not needed" for an update that is clearly needed. For instance, if I run a compliance report and look for the status of KB2775511, I get a lot of computers showing "Update is not required"
    - however, these computers don't have KB2775511 installed, and clearly need it.
    In fact, each client believes it needs the update because it's listed as "Missing" when I check the CCM_UpdateStatus WMI class at "root/ccm/SoftwareUpdates/UpdatesStore". Furthermore, if I deploy the update via SCCM to one of these computers,
    the computer recognizes it needs the update and installs it. So it seems that the report (or wherever the reports gets its information) is what's at fault here.
    The other odd thing I notice about the report is that the computers with incorrect statuses have very recent dates for "Last State Received", and no date for "Last State Change". This is different from computers that are correctly
    reporting their status, which have values for both, typically with older dates.
    Any idea why my reports are incorrect?
    Eric Hodges

    Hi,
    Have you checked the following log files:
    StateMessage.log(Client)
    It records details about software updates state messages that are created and sent to the management point.
    MP_Relay.log(Site system server)
    It records the transfer of files that are collected from the client.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Availability Status

    HI,
    I'm facing a problem with my Availability Status functionality in the member List Iview...it doesn’t work properly...meaning, when I choose ‘Auto Detect Status’ it shows that I’m offline while I’m online...how to make this functionality work..please advise

    Hi,
    but this wasn´t the solution of the problem, was it?:
    problem: when I choose ‘Auto Detect Status’ it shows that I’m offline while I’m online...
    Because we have the same problem and it seems to me like a bug. The answer for this problem from SAP is everytime patching (to Patch 33 then to Patch 35).
    Now we have Patch 35 and the problem is still there. So it is interesting to hear that anyone has the same problem.
    Bye Sybille
    Message was edited by: Sybille Schleifer

  • Why isn't my status bar showing for the home sharing? Neither the settings or 'show items not in my library' button are not coming up.

    I just want to share music with other computers but the status bar is not popping up. The other libraries are but I can't do anything with their media and vice versa.

    Hello there, aslasi.
    The following Knowledge Base article offers up some great steps for troubleshooting your issue:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Add new User Awareness Status Messages(Collboration)... :)

    Hello All,
    I want to add new user availability status messages (which are related to Awareness Status Selector in Collaboration).
    When an user enables the Collaboration Launch Pad, the user can enable on:
    i> Auto Detect Status
    ii> Not Available
    I would like to add essages like "Be Right Back", "In Meeting", etc....just like we have in Yahoo Messenger.
    I found the par file which is respensible for such  Collboration feaures & its:
    "com.sap.netweaver.coll.shared.ui.par"
    but when I opened the par file to check the details...noticed that all is in the portalapp.xml file.
    Cannot understand where can i add new messages....
    Please help...
    Awaiting Reply.
    Thanks and Warm Regards,
    Ritu R Hunjan
    <i>Note: Please excuse me for posting this in EP Development Content and not KMC Forum section.</i>
    Message was edited by: Ritu  Hunjan

    Reinstalling isn't a drastic measure w/Snow Leopard. It just replaces all OS components with new and uncorrupted ones and Apple's basic apps, such as TextEdit, Mail, Safari, and Terminal. That eliminates any mucked up ones. Once you assure yourself that the problem's solved, make a bootable backup/clone or Time Machine backup and update via Software Update. Let us know how it turns out.

  • Detection Types FCS

    Hello,
    Could anyone tell me what the Detection Status means or is there a list of them with discriptions? I have a Detection type of Concrete and others which say Defintion File and I want to know what means what...
    Can anyone assist?
    Many thanks
    James

    That would be helpful information to have. 
    Detection Type: Heuristics, Generic, Concrete, Dynamic Signature
    I found the above types in the explanation of event ID: 1116, but very little as to what they mean.

Maybe you are looking for

  • Why not Deprecate java.util.Date and java.util.Calendar

    With the introduction of java.time, why did you not flag java.util.Date and java.util.Calendar. These classes have been a bane to every Java developer and should never be used again with the introduction of Java 1.8.

  • IM client in a jsp

    Dear all, Can anyone suggest a IM client that can be called within a jsp (and then inserted within a portlet in the IBM Websphere framework)? All the IMs I have seen seem to standalone client/server apps, not intended for use within a jsp. Thanks a l

  • Production order & purchase order

    Hi What is the difference b/w production order and purchase order can u briefly explain me about. Thanks in advance

  • Mixing public and private networks on the same switch

    Hello Everyone, I know this may get some security engineers in frenzy but wanted to know if there is a safe way to mix public and private networks on the same switch.  We have many remote offices that we want to add public wifi and a couple of other

  • Reg: HU2 System

    Hi All, Can i use HU2 system as a sand box to learn ABAP and functional like fico...? I think the system is for navigation, testing....etc Regards, Venu V