Request by web url works but fails by IP Address

I am in a fix . I am trying to develop and HTTPSClient in java which will run and get html from this URL
https://webqa.mpnr.com/servlet/Test
Since this website is served by 4 separate boxes with a load balancer in between . I want to creat a utility which can basically request HTML from each server .
I put my script (firewall no issue) in each box and trying to access by https://19.44.14.172:8079/servlet/Test . The IP address changes for each box which I get accordingly .
I get Unrecognized ssl handshake What does that mean .I know JSSE is installed properly as I could get document with this request https://webqa.mpnr.com/servlet/Test
why am I not able to get by IP and Port number :
The reason for using IP is that I am inside a firewall so I need to do that ..
ANy Security and JSSE gurus ..help

Just a thougth: could it be that you are using a server-certificate that is made for the webaddress and not for the IP address? For a server-certificate the DN field should be the server name...
Andy

Similar Messages

Iphone email works but generates wrong return address

I'm using iphone 5 ios7
I can receive and generate email from my iphone to my pop server account. However, any email I send out has the wrong return addess -- it's missing a digit.
In settings, when I go to that account, it has the wrong address with a check mark. But all efforts to add another email, the right one, and put a check next to that to make it the default, have failed. Correct address simply does not remain on that line once I leave that screen.

What part of settings are you going to where you see the email address with a checkmark? The return address for your email is set at the beginning and when you create the account. Your best bet is to delete the account and recreate it making sure all settings are correct.
I think I found where you were. When you first go into Settings and then select the account, then look under POP account information and select the email. You need to fix the default, which is the one when you create the account. That is where the error is at. You cannot change the default by adding a new address in that area.
Message was edited by: ChrisJ4203

War file created in Eclipse works, but fails when created by Ant

Hi,
I am having trouble getting my flex war file to work when I create it using Ant, even though the same war works fine when I create it from my Eclipse Export War function. This is a critical problem and any ideas or suggestions would be greatly appreciated.
I have a working installation of LCDS running under JBoss 4.0.5 (in a CENTOS (Red Hat) environment). I have implemented a datatier in Java to interact with my PostgreSQL 8.x database. The Java code, plus the necessary flex jars and xml files and some mxml test programs, are all in an Eclipse J2EE project that I created from the flex samples.war file. It all works fine when I use Eclipse to create a WAR from the project and deploy it in JBoss. My problem is this: When I create a WAR piece by piece using Ant, then deploy it to JBoss, that WAR does not work. The error I get is this:
javax.servlet.ServletException: Invalid Configuration: see previous failures. flex.webtier.util.ServiceUtil.setupFlexService(ServiceUtil.java:55) flex.webtier.server.j2ee.MxmlServlet.init(MxmlServlet.java:57), etc.
When I look at the log I see this problem:
"You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.",
but that error is in the server log even when I use the good WAR file.
I have compared the two wars but cannot find any substantial difference between them.
Thanks in advance!

Have you tried enabling debug level logging and removing the category filters in services-config.xml? It should show all the destinations being created, and if any are failing. To get the maximum level of log detail, something like this should work:
><logging>
>
> <target class="flex.messaging.log.ConsoleTarget" level="Debug">
>
> <properties>
>
> <prefix>[Flex] </prefix>
>
> <includeDate>false</includeDate>
>
> <includeTime>false</includeTime>
>
> <includeLevel>false</includeLevel>
>
> <includeCategory>false</includeCategory>
>
> </properties>
>
> </target>
>
> </logging>
Have a check that your remoting destinations are shown starting correctly for both WAR files, and see if there are any messages in the log that might be relevant.

JDBC:Count Array. SQL query works but fails in JDBC

Hi,
I'm using the following SQL query
"SELECT red.id, name, count(green.id) FROM red, green WHERE area = 'northeast' AND red.id = zid GROUP BY name"
It executes perfectly from the DB command line giving me the results.
However when I call it from within JDBC i am getting null values.
My JDBC call ia as follows( Where lst is the above query)
rs = st.executeQuery(lst);
while(rs.next()){
nidV.addElement(rs.getString("red.id"));
nnmV.addElement(rs.getString("name"));
nnumV.addElement(rs.getString("count(green.id)"));
I do realize that many folks use Integer for count queries but I pull them with as Strings all the time so that's not it.
The one diffrence between this and my other count queries is that this one returns an array (Vector) of counts.
Any ideas?

the problem is probably:
SELECT red.id, name, count(green.id) ...
nnumV.addElement(rs.getString("count(green.id)"));you can either use an alias for the column;
SELECT red.id, name, count(green.id) COUNT_VAR
nnumV.addElement(rs.getObject("COUNT_VAR"));or use getObject(3) as suggested by drclap.

Externarl Hardd Drive and IMG 1.9...looks like it should work but fails.

Got 1.9 yesterday and tried to conecet two different esata hard drives. Both appeared to go through the recognition step but after reboot the drives do not show up. Anyone else had trouble with this? Getting various opinions from different fios people whether the external hard drive is even supported in 1.9.

What errors or messages do you get, if any?
nealb2 wrote:
Got 1.9 yesterday and tried to conecet two different esata hard drives. Both appeared to go through the recognition step but after reboot the drives do not show up. Anyone else had trouble with this? Getting various opinions from different fios people whether the external hard drive is even supported in 1.9.

Oracle ODBC as user works but fails as 'SYS'

Windows 7
Oracle XE 11gR2
From Windows, I can successfully create and connect with a system data source using an user Oracle account.
But when doing then same configuration process I can not create or connect using the 'SYS' account.
Understandably, I get the error 'ORA-2009: connection as SYS should be as SYSDBA or SYSOPER'.
What is the solution to creating an ODBC DSN for the user 'SYS'?
Thanks

I am writing an automated installation script that requres DBA access in order to create user accounts (schemas), tablespaces, etc. I need to log into Oracle as 'SYS' and the application uses ODBC to connect to the database.

The keyboard functions work but fails to display in Windows 7

I have the recent 15 inch, i7 Macbook Pro (2.2 GHz version). I had no problem installing Windows 7 using Bootcamp and have updated the Bootcamp after the installation via Apple Update.
To clarify, what I mean by that is all the functions such as volume control, eject, and brightness control from the keyboard works. However, at the beginning of the bootcamp install, I was able to see the icons pop up on the display. Now, there are no icons anymore. I now have Windows 7 Professional SP1, and have my suspicion on the Windows update. Any ideas?

Well... this is what I found out and what I did to "fix" my problem. First my situation was that I had 2 drives, a lite-on blu-ray rom drive that was supposed to basically read anything, and a pioneer blu-ray burner. I was going to use the rom drive to do my reading and reserve the burner for just that, burning. What I found out, because Encore would freeze when loading, was that Adobe uses a Roxio routine to go out and get the information about all the drive in the environment to know how to use said drive(s) for this session. The Roxio routines hang in an endless loop, for me, on the rom drive. When I go into device manager and disable the rom drive, Encore loads just fine and I can master... whatever, and burn or create ISO images and go on my merry way. When done, I can re-enable the drive and use it as intended except for trying to use it in Encore.
This happens in CS3, CS4, CS5, and I think I tried it in CS5.5. Roxio never has "fixed" the problem.
My fix to fix the problem.. I replaced the blu-ray rom drive with another pioneer burner. Turns out the new drive was a newer version. So I moved the older version pioneer to the lower drive letter and use it as the reader drive for anything and setup the newer pioneer drive as my burner drive. Encore loads with both drives enabled, I can master anything, and eveything works fine. I've given up trying to have a rom drive for "just reading".
Also, given up testing to see if Roxio has ever "fixed" thier init routines for Encore. It always works this way with 2 burners on my system. One I use as a "reader" all the time which is also my backup burner and one as my "production" burner. And BTW, I usually build on ISO image with Encore and use Image Burn to burn my multiple copies output.
This is my "fix"!!

HP deskjet F2480 printer : Scan and photocopy is working but fail to print for word and excel, etc.

HP deskjet F2400 series installation successful. No error detected.
Scan function and copy function perfrom as per normal. However, printing from word and excel file not functioning.
No error display when print out from word or excel.
Please advise?
Thank you
Donald

Hi,
Does it print from anywhere else?
And as a test go to www.hp.com/go/tools and download the "print diagnostic utility" and run it.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Getting error while creating Customer Invoice Request via Web Service

Hello,
I am trying to create customer invoice request via web service.
But I am getting the error message "No scheme configuration found for scheme '&CIRHP&' " continuously.
It is working fine in reference tenant. But using the same payload its giving error in another tenant.
Can you please tell me what is the root cause for this error?
I have included the payload used in the prototype tenant(Payload.txt) and screen shot of the error.
Thanks and Regards,
Sriram

Hi,
Check the WSDL file is wellformed or not..You can test it using tools like XML Spy.
Might be the attribute tag is missing something..If WSDL file is correct then, create proxy by selecting the WSDL file from local machine..
Regards,
Sunitha

Messaging working in BlazeDS deployed on Windows Tomcat but failing in Tomcat deployed on Ubuntu

I have been going round and round on this for days. I have no idea how to solve it. Everything works fine in windows but now I have to move to Ubuntu. I set up a streaming server with BlazeDS which is messaging to my clients great when my war is in tomcat 7 on windows but is failing in tomcat 7 on Ubuntu.
I see my client connect to BlazeDS on Ubuntu. The DEBUG messages print out that I have a client subscribed. It says that I have one FlexSession for an id and one client subscribed to streaming-amf. Then, a few seconds later, it says that the client sent a duplicate request "streaming-amf recieved a duplicate sreaming connection request from, FlexClient with id ... Faulting request."
Next the log files print out that there are no streaming clients for the FlexSession and no streaming clients for the endpoint streaming-amf.
This is the same software that works fine in the Windows Tomcat container but is not in Ubuntu Tomcat even though the WAR is exactly the same. In case it helps, my config files and calls are below:
messaging-config.xml
    <destination id="sp-streamingchannel">
                       <properties>
            <network>
                <session-timeout>0</session-timeout>
                <throttle-inbound policy="ERROR" max-frequency="50"/>
                <throttle-outbound policy="REPLACE" max-frequency="500"/>
            </network>
            <server>
                <allow-subtopics>true</allow-subtopics>
                <subtopic-separator>.</subtopic-separator>
                <max-cache-size>1000</max-cache-size>
                <message-time-to-live>0</message-time-to-live>
                <durable>true</durable>
            </server>
        </properties>
            <channels>
             <channel ref="streaming-amf"/>
            </channels>
           <adapter ref="SPStreamingAdapter"/>
           </destination>
services-conf.xml
    <channel-definition id="streaming-amf" class="mx.messaging.channels.StreamingAMFChannel">
              <endpoint url="http://localhost:8080/SP-Web-1.0/messagebroker/spamf" class="flex.messaging.endpoints.StreamingAMFEndpoint"/>
                    <properties>
                        <idle-timeout-minutes>0</idle-timeout-minutes>
                        <max-streaming-clients>150</max-streaming-clients>
                        <server-to-client-heartbeat-millis>5000</server-to-client-heartbeat-millis>
                              <user-agent-settings>
                      <user-agent match-on="MSIE" kickstart-bytes= "2048" max-streaming-connections-per-session="2"/>
                      <user-agent match-on="Firefox" kickstart-bytes="0" max-streaming-connections-per-session="4"/>
                      <user-agent match-on="AdobeAIR" kickstart-bytes="2048" max-streaming-connections-per-session="2" />
            </user-agent-settings>
                    </properties>
          </channel-definition>
The calls in Flex:
public var channelDest:String = "http://98.193.212.138:8080/SP-Web-1.0/messagebroker/spamf";
private var channelName:String = "streaming-amf";
channelSet = new ChannelSet();
channel = new StreamingAMFChannel(channelName, channelDest);
var c:StreamingAMFChannel = new StreamingAMFChannel();
channelSet.addChannel(channel);
channel.connect(channelSet);
consumer = new Consumer();
consumer.destination = "sp-streamingchannel";
consumer.channelSet = channelSet;
consumer.subtopic = "table." + tableID;
consumer.subscribe();
Why would this work fine on one server but fail on the other? Thanks so much for any help you can offer.
While it may not be releavnt to this question, I do have remoting working fine with BlazeDS on both systems. When my app starts, the user has to log in. All of that is done with BlazeDS and is working fine on both Win and Ubuntu. I only have a problem when it comes to streaming with BlazeDS as is shown above.

I have been going round and round on this for days. I have no idea how to solve it. Everything works fine in windows but now I have to move to Ubuntu. I set up a streaming server with BlazeDS which is messaging to my clients great when my war is in tomcat 7 on windows but is failing in tomcat 7 on Ubuntu.
I see my client connect to BlazeDS on Ubuntu. The DEBUG messages print out that I have a client subscribed. It says that I have one FlexSession for an id and one client subscribed to streaming-amf. Then, a few seconds later, it says that the client sent a duplicate request "streaming-amf recieved a duplicate sreaming connection request from, FlexClient with id ... Faulting request."
Next the log files print out that there are no streaming clients for the FlexSession and no streaming clients for the endpoint streaming-amf.
This is the same software that works fine in the Windows Tomcat container but is not in Ubuntu Tomcat even though the WAR is exactly the same. In case it helps, my config files and calls are below:
messaging-config.xml
    <destination id="sp-streamingchannel">
                       <properties>
            <network>
                <session-timeout>0</session-timeout>
                <throttle-inbound policy="ERROR" max-frequency="50"/>
                <throttle-outbound policy="REPLACE" max-frequency="500"/>
            </network>
            <server>
                <allow-subtopics>true</allow-subtopics>
                <subtopic-separator>.</subtopic-separator>
                <max-cache-size>1000</max-cache-size>
                <message-time-to-live>0</message-time-to-live>
                <durable>true</durable>
            </server>
        </properties>
            <channels>
             <channel ref="streaming-amf"/>
            </channels>
           <adapter ref="SPStreamingAdapter"/>
           </destination>
services-conf.xml
    <channel-definition id="streaming-amf" class="mx.messaging.channels.StreamingAMFChannel">
              <endpoint url="http://localhost:8080/SP-Web-1.0/messagebroker/spamf" class="flex.messaging.endpoints.StreamingAMFEndpoint"/>
                    <properties>
                        <idle-timeout-minutes>0</idle-timeout-minutes>
                        <max-streaming-clients>150</max-streaming-clients>
                        <server-to-client-heartbeat-millis>5000</server-to-client-heartbeat-millis>
                              <user-agent-settings>
                      <user-agent match-on="MSIE" kickstart-bytes= "2048" max-streaming-connections-per-session="2"/>
                      <user-agent match-on="Firefox" kickstart-bytes="0" max-streaming-connections-per-session="4"/>
                      <user-agent match-on="AdobeAIR" kickstart-bytes="2048" max-streaming-connections-per-session="2" />
            </user-agent-settings>
                    </properties>
          </channel-definition>
The calls in Flex:
public var channelDest:String = "http://98.193.212.138:8080/SP-Web-1.0/messagebroker/spamf";
private var channelName:String = "streaming-amf";
channelSet = new ChannelSet();
channel = new StreamingAMFChannel(channelName, channelDest);
var c:StreamingAMFChannel = new StreamingAMFChannel();
channelSet.addChannel(channel);
channel.connect(channelSet);
consumer = new Consumer();
consumer.destination = "sp-streamingchannel";
consumer.channelSet = channelSet;
consumer.subtopic = "table." + tableID;
consumer.subscribe();
Why would this work fine on one server but fail on the other? Thanks so much for any help you can offer.
While it may not be releavnt to this question, I do have remoting working fine with BlazeDS on both systems. When my app starts, the user has to log in. All of that is done with BlazeDS and is working fine on both Win and Ubuntu. I only have a problem when it comes to streaming with BlazeDS as is shown above.

Cfhttp post to AWS S3 works in CF9 but fails in CF10

I'm using the Instructure Canvas API for uploading files. After the initial API call, Canvas returns information that is used to make a POST request to Amazon Web Services's S3 service to upload a file.
Here is the request I'm using to post the file to AWS S3, populated with the data returned by the Canvas API:
<cfhttp url="#aws.upload_url#" result="result" method="post" multipart="yes">
          <cfhttpparam type="formfield" name="key" value="#aws.upload_params.key#" />
          <cfhttpparam type="formfield" name="acl" value="#aws.upload_params.acl#" />
          <cfhttpparam type="formfield" name="Filename" value="#photoName#" />
          <cfhttpparam type="formfield" name="AWSAccessKeyId" value="#aws.upload_params.AWSAccessKeyId#" />
          <cfhttpparam type="formfield" name="Policy" value="#aws.upload_params.Policy#" />
          <cfhttpparam type="formfield" name="Signature" value="#aws.upload_params.Signature#" />
          <cfhttpparam type="formfield" name="Content-Type" value="#aws.upload_params['content-type']#" />
          <cfhttpparam type="formfield" name="success_action_redirect" value="#aws.upload_params['success_action_redirect']#" />
          <cfhttpparam type="file" name="file" file="#fullPath#" />
</cfhttp>
This request works on a ColdFusion 9 server (the response returns "200 OK"), but fails on a ColdFusion 10 server (the response returns "500 Internal Server Error"). The Canvas API call works in both cases.
Any ideas or suggestions appreciated.

Thanks for the replies. I used cfdump to examine the results, but other than a custom 500 error page, I didn't see anything out of the ordinary.
Using CF's built-in S3 capabilities may work. I haven't used it before and so I was just following the steps provided in Canvas's documentation. I am not positive how to use the data returned from the initial Canvas API call to form the S3 request. I tried the following:
<cffile
    action="write"
    output="S3 Specifications"     file="s3://#jsonData.upload_params.AWSAccessKeyId#:#jsonData.upload_params.policy#@#Repla ce(jsonData.upload_url,'https://','','ALL')##jsonData.upload_params.key#"/>
Assuming that the returned policy value (a 545-character random string) is the secrect key and that the upload_params_key should be appended to the bucket location (it looks approximately like this: account_XXXXX/attachments/XXXXXXXX/XXXXXXXXXX.jpg). I was getting a SignatureDoesNotMatch error from that request.
Additionally, I tried sending the requests to a basic web server that should capture the request data and write them to a file. It doesn't look like it worked like I expected it to--I'm not sure why neither instance includes all the data--but here are the results in case they are relevant:
CF9:
POST / HTTP/1.1
Host: osric.com:50000
Connection: close, TE
TE: trailers, deflate, gzip, compress
User-Agent: ColdFusion
Accept-Encoding: deflate, gzip, x-gzip, compress, x-compress
Content-type: multipart/form-data; boundary=-----------------------------7d0d117230764
Content-length: 6289
CF10:
POST / HTTP/1.1
User-Agent: ColdFusion
Content-Type: multipart/form-data; boundary=-----------------------------7d0d117230764
Connection: close
Content-Length: 6289
Host: osric.com:50000
-------------------------------7d0d117230764
Content-Disposition: form-data; name="key"
Content-Type: text/plain; charset=UTF-8
account_XXXXX/attachments/XXXXXXXX/XXXXXXXXX.jpg
-------------------------------7d0d117230764
Content-Disposition: form-data; name="acl"
Content-Type: text/plain; charset=UTF-8
private
-------------------------------7d0d117230764
Content-Disposition: form-data; name="Filename"
Content-Type: text/plain; charset=UTF-8
XXXXXXXXX.jpg
-------------------------------7d0d117230764
Content-Disposition: form-data; name="AWSAccessKeyId"
Content-Type: text/plain; charset=UTF-8
XXXXXXXXXXXXXXXXXXXXXX
-------------------------------7d0d117230764
Content-Disposition: form-data; name="Policy"
Content-Type: text/plain; charset=UTF-8
XXXXXXXXXXXXXXXXXXXXX[...lots of characters...]XXXXX
-------------------------------7d0d117230764
Content-Disposition: form-data; name="Signature"
Content-Type: text/plain; charset=UTF-

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

Java mapping in ccBPM works in PI 7.0 but fails in PI 7.1

Hi guys,
at the moment we are upgrading form SAP PI 7.0 to SAP PI 7.11.
In a scenario for processing of incoming orders we use an ccBPM.
In this ccBPM there is an mapping where the original xml document of the order are combined with some
additional information form an web service (multi mapping 2 => 1)
The result of this mapping is processed further to create an sales order in the backend.
The multi mapping an java mapping is used.
Now we are testing the scenario with PI 7.11 and it fails at this mapping step.
in the workflow log following error occurs.
An exception with the type CX_ST_MATCH_ELEMENT occ urred, but was neither handled locally, nor de
Message no. W8899
I tested the same message on out SAP PI 7.0 system and the whole ccBPM works well.
When I extract the 2 messages from workflow log and paste them into the test tab of the operation mapping of Enterprise Service Builder of SAP PI 7.11, surrounding by the envelope used by multi mappings
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
               XML MESSAGE 1
   </ns0:Message1>
   <ns0:Message2>
               XML MESSAGE 2
   </ns0:Message2>
</ns0:Messages>
the mapping works without error, but at runtime it fails, throwing the error mentioned above.
What could be the reason for this error?
Does the multi mapping change in PI 7.11 at runtime?
Could it be a problem parsing the multi message?
Any help appreciated.
Kind regards
Jochen

Hi Raja,
thanks for your suggest.
I know this issue, the java class files are compiled using jdk 1.5.
We made some more tests.
e.g. created an dummy ccBPM with two mappings, one two spilt the incoming message in two messages (graphical message mapping) and one to merge this two messages to one message again (java mapping)
the mapping works at design time on test tab, but fails with the same error at rumtime.
Also we tested one single operation mapping with this two mappings (split via graphical mapping and merge via java mapping)
This works also at design time but fails at runtime with a similar error shown in smq2
The error message is Error ST_MATCH_FAIL occured. P1=element-start P2=M
we tried to add the whole incoming message to the trace by
getTrace().addWarning()
but an trace object is never created in for this step in the workflow log.
it seem whether you can not add trace messages using the command or that the error occures before this command will be used.
Kind regards
Jochen

Android kitkat issue in loading swf file from device. URL found but not working

Hi,
I am facing one issue from a very long time regarding file access in Android Kitkat version 4.4.*. I have developed Adobe Air player application for android and it is working as expected below kitkat version but not on kitkat.
I am following this methods -
NativeApplication.nativeApplication.addEventListener(InvokeEvent.INVOKE, onInvoke);
public function onInvoke(event:InvokeEvent):void
                                    var newFile:String = String(event.arguments[0]);
                                    trace("Received new file from Android: "+newFile)
Received URL form device in Android Kitkat -
/storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Animation/27 031_1_Welcome screen.swf
file:////storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Anim ation/27031_1_Welcome screen.swf
                - Loading this URL using loader class in AS3 AIR but not working.
file%3A///storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Ani mation/27031_1_Welcome%20screen.swf
       - Have used also by doing escape character but still it is not working showing file not found both SWF and mp4 case. (Mp4 case NetStream.Play.FileNotFound)
By using the above methods I can have swf or mp4 video url but when I am loading it, It is not working giving error message "File not found/ IO Error". I have read that if use escape character then it will work but I have used escape character also but it is not working.
Humble request you to please advise how can I solve this issue.
Best regards,
Sunil Kumar

Starting in KitKat, Google requires that applications have permission to access files on the system. You must specifically add either the READ_EXTERNAL_STORAGE or WRITE_EXTERNAL_STORAGE permissions in order to access files. Adding either one of those permissions should let you read/access files on the device. Prior to KitKat, you didnt have to have these permissions listed in the manifest to access files.

IFolder windows client works first but fails on 2nd connect

Hello,
this is a strange phenomenon. I installed iFolder server 3.8 on Ubuntu 10.04 as described in
http://www.x2b4.com/howto/how-to-install-ifolder-on-ubuntu-server (install from RPM).
Web access works fine from Linux and Windows. The windows client works totally fine initially, it connects, creates folders, synchronizes. But if I hit disconnect in the iFolder window and then try to connect again, the application crashes. On starting it again connection takes forever, asks for a password, and then crashes before the iFolder window appears. Next time I start, the iFolder window appears but at the next (automatic) synchronization connecting fails again.
What went wrong in between the initial configuration of the client and the next connection to the server????
Thanks for any ideas
Jan

hello
ia have the same problem.
have you solved it ?
regards
lukasz
Originally Posted by resap
Hello,
this is a strange phenomenon. I installed iFolder server 3.8 on Ubuntu 10.04 as described in
How to install iFolder on Ubuntu server (install from RPM).
Web access works fine from Linux and Windows. The windows client works totally fine initially, it connects, creates folders, synchronizes. But if I hit disconnect in the iFolder window and then try to connect again, the application crashes. On starting it again connection takes forever, asks for a password, and then crashes before the iFolder window appears. Next time I start, the iFolder window appears but at the next (automatic) synchronization connecting fails again.
What went wrong in between the initial configuration of the client and the next connection to the server????
Thanks for any ideas
Jan

Request by web url works but fails by IP Address

Similar Messages

Maybe you are looking for