Required BAPI's for creating travel request

Hi ,
Can you please help on below issue.
I need to know what are the BAPI'S are supporting for creating travel request.
Thanks,
Kumar.V

http://scn.sap.com/thread/1738366

Similar Messages

  • Error in Create Travel Request

    Good Morning.
    I am implementing Travel for ESS. But in the moment of give clic in the service for Create Travel Request the system display the following error:
    [Error Travel ESS|http://www.freeimagehosting.net/uploads/46ed778b99.jpg]
    What is cause of this error?
    Kind Regards

    Hi Sergio
    I check and the User is not expired.
    I found the following suggestion.
    I asume that you are using a "Basic Authentication" method, if this is your case, you should configure the SICF service with the following parametters:
    1) Go to SICF, /yourservice / double click
    2) On the "Logon Data" tab, in the "Procedure" option choose "Alternative Logon Procedure".
    3) On the same tab, at the "Logon procedure option", delete the SSO option, and change the Number of the another methods, raised the "Basic Authentication" to the first place.
    4) Go to Error pages tab, flag "System logon", and after that click over Configuration, here check "Do no display warnings"
    The question is:
    This is necessary?
    Kind Regards

  • Remote-Enabled BAPI/RFC for creating "Request Special Payment (SPSP)"

    Is there any Remote-Enabled BAPI/RFC for creating "Request Special Payment (SPSP)" which is one of the Personnel Change Requests under MSS ?
    Thanks.

    closing to post another question.

  • Portal runtime error on creating Travel Request

    I have copied the standard ESS Role and created my own ESS Role. I then assigned this to my portal user.
    Then when I log into the portal as the user and click on "Create Travel Request" or "Create Expense Report" URLs, I get the following error:
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 04:53_02/02/10_0021_23623650
    Refer to the log file for details about this exception.
    Is there any portal/IMG setup that is missing? Or any authorization missing?

    Thanks I made changes to Resources node in IMG.
    Before making these changes I was getting the following error:
    Portal Runtime error. An exception occured while processing your request... Exception ID:.... Refer to log for details....
    I just changed the URL of PCD page in the Resources node.
    Note:
    (1) In Portal I have made my own folder structure:
    -> Portant Content
    -->My Travel Setup
    --->Employee Self-Service
    >Roles
    >MyTravelESS (role copy of the original Portal ESS role, Delta link. i.e. ESS role under End User Content-->Employee Self-Service)
    (2) I have not copied the iviews, pages worksets etc. under my new folder structure.
    But Now I am getting another error:
    500 Internal Server Error...
    Root Cause
    The initial exception that caused the request to fail, was:
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name base

  • Displying wrong data after entering estimated cost while creating travel request.

    Hi Team,
    We are facing an issue while creating travel request from portal.
    When we are entering estimated cost and after clicking on save and send button we are getting data is saved as correct.But after clicking on display form button the data is showing as different.
    But after clicking on display form it is showing as 298900(adding two zeros at end for every cost).
    Please help on this.
    Thanks & Regards,
    Kumar.

    Hi Shankar,
    Thanks For the reply. Can you please let me know what settings need to be there in SU3. This issue is effecting for all the users belongs to that country. Can you please suggest me!!
    Thanks in advance.
    BR,
    Kumar.

  • Creating Travel request with TRIP Getting Error 'Infotype P0017 could not be read'

    Getting this error while creating travel request with TRIP transaction code. Please help for an alternate way to create Travel request or help to resolve this issue.
    If this error is due to 0017 maintenance, please help me to maintain infotype 0017.

    Hi
    This is done by functional Guy
    As work around
    Go to transaction PA30 to open master record of employee for whose trip need to be created type 17 at infotype ->  enter F5  and Save.
    With regards,
    Gopala Krishna

  • Creating Travel Request Error( structure field City_Districtadr not found )

    Hi All
    While creating travel request from EP, we are encountering the following "error:com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcTreGeneralData.GeneralDataCheck.GeneralDataCheck_Output.GeneralDataCheck_E_General_Data): structure field City_Districtadr not found "
    I believe the issue is related to SP levels. Can anyone help resolve this.
    Thanks
    R Kumar

    Hi,
    As other said you may need to update software components SAP-HR , EA-HR for this check this
    SAP Note 761266 - Self Services Patches
    Regards
    Vijay
    Edited by: Vijay Mohan on Jun 27, 2008 3:11 PM

  • Error while Creating Travel Request ..thru TRIP

    Dear all,
    As I am suppose to creat a travel request thru TRIP but i am geting the below error and the msg no..............
    Error: Trip country IN / trip region do not exist in the system (T702O)
    Message no. PTRA_WEB_INTERFACE031
    As Mr. Paulo Vitoriano suggested me to Define Trip Areas, etc......... but my Trip Areas has already been defined and i have checked it also .... but still the error is same ....... so frnds pls tell me wat else may be the problem....
    I read thred Error while Creating Travel Request ..thru TRIP which is posted by prasanth but what they suggested i maitained already but still i am facing same problem could you pls suggest me where i missed.
    Waiting for Reply.
    Regards,
    Nagaraju

    Hi,
    Please check the following:
    1. Just check have you assigned country India to the trip provision variant you have created.
    2. Just check whether you have assigned the trip provision variant correctly to the respective country.
    Regards,
    S.Srikanth

  • Creating Travel Request

    Dear.
    I need know the name of the method that allow Create the Number of Travel in the service Create Travel Request  for ESS.
    Thanks in advance.
    Regards

    do a trace using transaction ST05 when you create a travel request using the portal. Than check the trace to see with RFC's were used

  • Error while creating Travel request

    Dear All,
    ESS 2005/SP6
        While creating travel request in I am getting following error
    "Errors have been discovered when checking the Expense Report. Please correct them in order to proceed."
    Regards,
    Kamal Rawal

    Hello Kamal
    Did you manage to resolve the issue in relation to "Errors have been discovered when checking the Expense Report."?
    Best Regards
    Roger Earle
    [email protected]

  • Bapi's for creating Maintenance order in IW31 with notification

    Hi All,
       Is there any bapi's for creating Maintenance order with Notification number in the transaction iw31.
      Also is there any bapi's for creating measurement document.
    Points will be awarded.
    Regards,
    vinoth

    RFC MeasDocument: Individual Processing, Create
    MEASUREM_DOCUM_RFC_SINGLE_001
    RFC MeasDocument: Individual Processing, Change/Display or Read
    MEASUREM_DOCUM_RFC_SINGLE_002

  • Function Module BAPI_ABSENCE_CREATE for creating leave request.

    Hi Experts,
    I am using FM BAPI_ABSENCE_CREATE for creating leave request. I am passing all the data into this as import parameter. When i am executing this return table gives statement  EPG184Employee/applicant is not locked yet
    Please let me know what i have to follow.
    Thanks And Regards
    Ranjeet Singh

    Use the below function modules in sequence
    1) HR_EMPLOYEE_ENQUEUE'
    2) BAPI_ABSENCE_CREATE
    3) HR_EMPLOYEE_DEQUEUE
    Functionality
    Using this method, an Absences infotype record (2001) can be created.
    Notes
    Messages are returned in the RETURN parameter. The parameter documentation contains the return codes and their meanings.
    The key fields used by this method are described under the parameters.
    This method can only be used if the ENQUEUE method has already been called up for the business object EMPLOYEE. For more information on the ENQUEUE method, please see the documentation on the function module BAPI_EMPLOYEE_ENQUEUE.
    Note: Create absence
    Caution! This API method only writes the Absences infotype (2001). It should no longer be used as it can lead to inconsistent time data. Instead, please use the corresponding 'ManageCreation' API method for business object BUS7007.
    Regards,
    SaiRam

  • Finding FM/BAPI/RFC for Create Inbound Delivery(vl31n).

    Hi all,
    i need for a FM/BAPI/RFC for Create Inbound Delivery(vl31n) or ASN
    where in import Parameter i have to pass -
    *vendor no*
    *PO no*
    *External ID no*
    *Delivery date*
    *TransPlanngDate*
    *BillOfLad*
    *GR/GI Slip*
    in Export i need ASN no and in tables we can use ITEM details.
    Regards,
    Sunil sahoo.

    Hi,
    Check the below link
    [https://forums.sdn.sap.com/click.jspa?searchID=16938983&messageID=5780492]
    Regards,
    Surinder

  • What are required feilds values for creating a sales order using va01?

    What are required feilds values for creating a sales order using va01?
    Please give examples if possible.

    Hi,
    go through this URL:
    <a href="http://web.mit.edu/cao/www/SB2002/CR/VA01.htm">http://web.mit.edu/cao/www/SB2002/CR/VA01.htm</a>
    Hope this will help you.
    Thanks
    Shiva

  • TRIP END DATE greyed out while creating Travel Request IN SAP ESS Portal

    Dear Friends,
                               I am trying to create a Travel Request from my ESS Portal,when I am entering the trip details as follows:
    General Trip Data  (header)
    Start: *    (Have to enter trip date)
    End:        (greyed out)   **** problem with this field
    First Destination:  Country/Region:     open field
    Reason for Trip:    open field
    Activity:     open field
    Estimated Cost:
    Previous Step  Review     Exit  (these are all tabs)
    The problem is that the END DATE is greyed out ,how do we enable it,is it a configuration setting or some code change in the function module
    PTRA_UTIL_GENERAL_DATA_FIELDS
    My portal consultant said that this FM is called in the backround R/3....please let me know ure views on this...
    Thanks,
    Best Regards,
    Karthik

    Hi Kartik,
    We are getting the same problem. Can you please share how did you solve this.  It is urgently required.
    Thanks,
    Vishal Patel

Maybe you are looking for

  • Convert varchar in db to boolean

    The dba's have modelled a field as a varchar(1), with valid values being 'Y' and 'N'. Can i map this as boolean within the Java class? thanks, craig

  • How.do.i.get.OS10.7.to.then.download.from.cloud.C.S?i.cant.get.C.S.at.the.moment.as.on.O.S 10.6.8

    How.do.i.get.os10.7.or.above?

  • Missing format

    We meet following problem.after we load data, find the following missing information. We can find it correct existing in infoobject, e.g. 0person, we can see the format is correct within this infoobject. However this format is incorrect in the relate

  • How to sort on Multiple columns in WebI report

    Hi          I am working in BO XI R2. I have a report containing two columns in a section. Section is on Fiscal Year- Fiscal year includes calendar year 2010 and 2011. data for fiscal year 2010 is from october onwards. The two columns in the section

  • 32-Bit Windows 7 IE8/9 Flash Player Size issue.

    I have a 24inch 1920x1080 monitor. I want to read the text on the screen but at the IE defualt of 100% it gets very tideous trying to read the wrighting and its the same with Adobe Flash player it becomes ridiculously small. I like to have my browser