Required or Optional Requirement in Profile Matchup

Hi all,
In PEPM (Profile Matchup) result, I see a tick box (Essential Requirement).
How to I set a particular Q as an Essential Requirement for a certain Job/Position? I tried looking up in HRTMC_PPOM but theres no way to assign that during the Q selection.
Please help.

Bhanu,
For making a field required on selection, you need to attach a SPEL with the bean, and make it true or false based on your requirement.
Refer PPR section of the developer Guide.
Regards,
Gyan
www.gyanoracleapps.blogspot.com

Similar Messages

  • HT5437 When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?

    When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?

    Yes, home sharing requires both to be on the same wifi network. As it stands access to the network requires the login via webpage, which cannot be done on Apple TV.  You will need to speak to IT in order to grant access for the device.

  • Force "Require password" option

    Just curious if there is a way to not allow the user to change the "Require password" option (Security Prefs/General) in Lion (10.7.3). If I make the user managed by the server I could disable the pane, but I'd rather than do that in this case. Any way to do it with a standalone machine? I want to force the Require password option and not allow the user to disable it.
    Thanks.

    My bad, saw the lock and assumed, didn't try it out on a non-admin account. Just did and its as you say.
    You could make the user managed, turn on parental controls and not allow the user to run System Preferences but that seems a bit draconian.
    It is possible by playing around with file permissions on the files that hold the prefs to prevent a user from changing these settings.  I was once able to help a user that wanted to prevent users from changing the Screensaver timeout value without also disabling other preference settings.  See How do I force a screensaver timeout?
    Something similar might work in your case
    regards

  • Require select-option functionality in Module Pool Programming

    Hi Gurus,
    I am doing a development by Module Pool on Warehouse Management. For that development user require select-option on
    screen for entering multiple storage type.
    My first question : Is any thing available for directly implement select-option by module pool ?
    My Second Question : I have use two text boxes for range and one button for multiple selection and arrange on screen like select-option. then on PAI of that button I call COMPLEX_SELECTIONS_DIALOG FM. Now it is working fine. Now I put some value in it. when I save the values and exit , I want the icon of the button must change from icon_enter_more to icon_display_more. I write the below code for that  in PBO of the screen:
           if rtab[] is initial.   "RTAB[] is a table for holding values what inputted in popup of multiple selection.
              write icon_enter_more as icon to button.  " BUTTON is screen field and it taken as a type C length 4 on TOP module as .
          else.                                                               " BUTTON taken on screen as push button.
              write icon_display_more as icon to button.
          endif.
    but the icon is not changing dynamically.
    If I use ICON_CREATE then one short dump happen describing OUTPUTLEN_TOO_SMALL.
    Can anybody please give me the solution.

    IN PBO SECTION.
    module STATUS_0001 output.
      SET PF-STATUS 'ZINVGUI'.
      SET TITLEBAR 'ZIN'.
    if rbtn1 = 'X'.
       loop at screen.
         if screen-group1 = 'GR2'.
         screen-input = 0.
         modify screen.
         endif.
       endloop.
    else.
       loop at screen.
         if screen-group1 = 'GR1'.
         screen-input = 0.
         modify screen.
         endif.
       endloop.
    endif.
    IF RTAB[] IS INITIAL.
       WRITE icon_enter_more AS ICON TO GTTYP.
      else.
       WRITE icon_display_more AS ICON TO GTTYP.
    endif.
    endmodule.
    IN PAI
    form GET_STORAGE_TYPE .
    TAB_FIELD-FIELDNAME = 'LGTYP'.
    TAB_FIELD-TABLENAME = 'LQUA'.
      CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
       EXPORTING
         TITLE                   = ' '
         TEXT                    = 'Storage Types'
        SIGNED                  = 'X'
        LOWER_CASE              = ' '
        NO_INTERVAL_CHECK       = ' '
        JUST_DISPLAY            = ' '
        JUST_INCL               = ' '
        EXCLUDED_OPTIONS        =
        DESCRIPTION             =
        HELP_FIELD              =
        SEARCH_HELP             =
         TAB_AND_FIELD           = TAB_FIELD
        TABLES
          range                   = RTAB
       EXCEPTIONS
         NO_RANGE_TAB            = 1
         CANCELLED               = 2
         INTERNAL_ERROR          = 3
         INVALID_FIELDNAME       = 4
         OTHERS                  = 5
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      DATA:LAST TYPE SY-TABIX.
      DESCRIBE TABLE RTAB LINES LAST.
      IF NOT rTAB[] IS INITIAL.
             Read the very first entry of the range table and pass it to
             dynpro screen field
               READ TABLE rTAB INDEX 1.
               IF sy-subrc = 0.
                  P_LGTYP1 = rTAB-low.
               ENDIF.
               READ TABLE RTAB INDEX LAST.
               IF sy-subrc = 0.
                  P_LGTYP1U = rTAB-LOW.
               ENDIF.
    ELSE.
      rTAB-low = p_lgtyp1.
      append rtab.
      rTAB-low = p_lgtyp1u.
      append rtab.
    ENDIF.
    endform.               
    IN TOP INCLUDE.
    DATA : GTTYP TYPE C length 4.

  • In sales order cross selling pop up screen requires FIND option

    Dear Friends,
    In our company we are using the pop up screen for cross selling items per BOM.
    Our requirement is in the pop up screen we require find option also. we have only copy and cancel options are there in the standard functionality.
    Could any one of you help us how can add the functionality of find option with out changing any standard code, ( i mean any OSS notes or user exits ).
    Thanks in advance,
    NLX

    Hi Joshi,
    By seeing the above link, I think after creating transaction variant we need to create Custom tcode to use that transaction variant.
    But, in this case we should use transaction VA01 only, but not any Custom Tcode..
    This is very urgent ..
    Is there any other option to meet my requirement...
    Thanks,
    Radhika

  • Change shipping condition from required to optional

    Dear friends
    I want to change some fields in customer master how to do it
    Example change shipping condition from required to optional how do I do it
    Ahmed

    Dear Jyothi.
    Pleas find the path and do as per instruction in Define Account Groups with Screen Layout (Customers) chose your account group and do seting as per your requirement ok it will give option gernal data and some other data so do it
    It you have any problem let me know ok
    Path
    SPRO u2013 financial accounting new u2013 account receivable and account payable u2013customer account -master data - Preparations for Creating Customer Master Data- Define Account Groups with Screen Layout (Customers)
    Regards
    Ahmed

  • How to control required and optional data elements

    I am developing a web service using a stateless EJB. By default, when I use servicegen, the WSDL contains nillable="true" for all elements. How can I modify my EJB code so I can specify which elements are required vs optional?
    Thanks.

    Hi,
    Use Function Module READ_TEXT to retrive the long text.
    Pass below values for parameters
    text name - <data element name>
    text id - 'TX'.
    text object - 'DOKU'.
    <b>Reward points for helpful answers</b>
    Satish
    Message was edited by:
            Satish Panakala

  • I received an oline fax, error message "You are not signed up for an appropriate enhanced pdf delivery option required for this request" How do I fix this?

    I received an oline fax, error message "You are not signed up for an appropriate enhanced pdf delivery option required for this request" How do I fix this?

    Hi howardw93055634,
    Please tell me where you are seeing this error message. It's not one that I'm familiar with as being related to Acrobat or Reader. Is it coming from your online fax service, or does it appear when you try to open the PDF file that you received in Acrobat or Reader?
    Best,
    Sara

  • Failed to Sync OneNote 2013 with Sharepoint 2013 - Saying Required Properties option is selected

    Hi All
    I am trying to integrating OneNote 2013 with Sharepoint 2013, but whatever i do it came up as:
    We can't sync because the Required Properties option is selected on the server. Disable the option, or move the notebook to a new location. (Error code: 0xE0000B9B)
    I've followed knowledge based and turn off the Required Properties as i can see off, but error still showing up.
    Has anyone encountered this error before?
    Thanks a lot for any contribution.

    HI G_Virus,
    Please check if any field is set as required, then set it to optional for the OneNote content type from the problem library.
    And also check Jannifer's reply mentioned that compare this content type fields to the OneNote without issue from other site collection or farm per the following post, see if it helps.
    http://office.microsoft.com/en-us/onenote-help/resolve-document-library-errors-when-using-onenote-with-sharepoint-HA102647129.aspx
    http://social.technet.microsoft.com/Forums/office/en-US/a0e8cb4e-6daa-4ef8-a856-337da837c5db/sync-error-to-sharepoint-2010-library-with-revisions-checkinout-not-enabled
    Thanks
    Daniel Yang
    TechNet Community Support

  • Is there a way set the object type defaults in the Profile Matchup (PEPM)?

    Our users would like to have the Profile Matchup (PEPM) default the object type to P (Qualifications profile of Person) and S (Requirements profile of Position).  Currently launching PEPM defaults to U (user) and S (position).  Is there a way to change the default value from U to P using a PID? or some other method?
    Thanks in advance,
    - Lora

    Hi Lora,
    I can't think of a way without changing the program behind it.
    Regards,
    Priya.

  • Skills Profile and Profile Matchup - Manager Notification

    In the Skills Profile and Profile Matchup (service EMPLOYEE_SKILLSENHPROFILE_SERVICE_13) when an employee updates one of their skills there is a message written to the screen that "Your manager will then be notified of the changes.".  I do not see any notification being created or a standard workflow for this.  What needs to be done to 'activate' these notifications?

    Hi Leah
    In order to realise this requirement you need set up workflow                                                                               
    For Skills you should use workflow WS1200124 - I believe this          
    is provided by application componenent CA-GTF-QR                                                                               
    The function module, which creates the event is                        
    HR_EVENT_WF_SUBPROFILE_DEFICIT.                                                                               
    This should be defined in table T779W                                  
    as follows                                                                               
    Q 1001 B032  INS  PDSP  000  BUS7030     HR_EVENT_WF_SUBPROFILE_DEFICIT
    Workflow is activated in transaction PFWS                                                                               
    It should also be mentioned that the standard workflow defaults     
    to the inbox of the employee- additionally           
    the workflow needs to be customized as follows to select manager -->                        
    Copy WS to your namespace                                                                      
    The agent for step 0004 Display HR Development Subprofile would have to
    be changed from Expression 'Employee' to 'Superior of workflow         
    initiator (rule) in the workflow builder for this template.        
    Afterwards it is necessary to activate the event triggering in your     
    workflow template and deactivate it in delivered template WS01200124.   
    The whole steps are                                                                               
    Copy workflow        
    Deactivate even triggering in delivered template                                                                 
    Change Step 004 expression     
    Save and Activate                                                   
    Test in ECC
    Test in Portal
    Alternatively please consider removing text either via Personalization or
    NWDI - if you do not wish workflow
    Best wishes
    Stuart

  • PROFILE MATCHUP

    Dear Friends,
    I am not clear on where and how to do profile match up? Please help me find a solution to this problem. Also, I want to know what is the use of Jobs and Tasks and how are they related?
    Regards,
    AXE

    Hi axe,
    For profile matchup you can use the transaction PEPM, wherin you can match the person qualifications with the requirements against position, jobs and task.
    Each of these contains required qualifications which are needed to be matched against one personnel aggignment's qualification.
    Try looking out in PEPM, with a existing pernr.
    Rgds,
    Swapnil

  • Profile Matchup - Compare Jobs

    Hi Experts,
    My customer has the following requirement: They want to implement something like Profile Matchup but between 2 Jobs. I know we can compare for example a Person (P) with a Position (S) or Job (C), but not Job (C) with Job (C). Is there any stabdard way that this can be applied?
    Thanks in advance

    Hi
    In order to find out Qualification Deficits and/or generating training proposals we perform profile match up b/w object types P, US etc... to S, C etc...
    What is the business requirement to compare JOBS? can you please expalin?
    Best Regards
    Reddy

  • MSS - Profile Matchup Fake TeamViewer Problem

    Hi,
    I have to make some changes to the  Profile Matchup component.  To deploy and run It requires a team views which is part of the Profile Matchup development component.  The component has a Application called TestProfileMatchupApp.  When I run and deploy I get this exception
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No instance id defined for VAC com.sap.xss.hr.tmv.vac.VTeamViewerComp.
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.getPropertyValue(FPMComponent.java:1003)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.getPropertyValue(FPMComponent.java:1141)
         at com.sap.xss.hr.tmv.vac.VTeamViewerComp.onBeforeOutput(VTeamViewerComp.java:234)
         at com.sap.xss.hr.tmv.vac.wdp.InternalVTeamViewerComp.onBeforeOutput(InternalVTeamViewerComp.java:208)
         at com.sap.xss.hr.tmv.vac.VTeamViewerCompInterface.onBeforeOutput(VTeamViewerCompInterface.java:144)
         at com.sap.xss.hr.tmv.vac.wdp.InternalVTeamViewerCompInterface.onBeforeOutput(InternalVTeamViewerCompInterface.java:136)
         at com.sap.xss.hr.tmv.vac.wdp.InternalVTeamViewerCompInterface$External.onBeforeOutput(InternalVTeamViewerCompInterface.java:212)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:602)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:568)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
    and so on
    Any ideas?
    Thanks Preston Sampson

    Hi,
    Faced this problem before and found out that its a authorization issue more than anything else..
    Did u try
    Note 844639 - MSS Authorizations and roles for WD services in ERP 2005
    Before this note ...
    Use the report contained in Note 785345 to copy the authorization-check
    indicator and authorization default values for the services from the SAP
    tables (USOBX, USOBT) to the customer tables (USOBX_C, USOBT_C), so that
    you can use these in Transaction SU24.
    Let me know if it works after this. MSS has all these peculiar auth problems.
    Cheers!!
    Ashutosh

  • Need Expert Advise on  Profile Matchup in HCM

    Dear all, we may be familiar with profile matchup using Employees (P) versus potential Position (S).
    I have 2 requirements;
    1. to do a matchup at the department level (or based on a group of employees instead of single). Is this possible via standard or customising is required ?
    2. Calculating deficiency and output as figures. for example, if i have a score of 2 for language English proficiency and the ideal scale is 5, i want the system to say that my score is 2/5 = 0.4 (40%) in a nice formatted display.
    Are both achievable? For your kind advice.

    Peter whatever you mentioned in your query can be achieved a few pointers on how this sis possible:
    1. your qualifications catalogue and the design of the same determines how you achieve your results.
    2. make sure your config for 'scales' against qualification are correct.
    3. make sure the assignment of the qualifications to different agents --> position/person/jobs et al is done according to the business process requirements.
    4. profile match-up std reports in ecc may not give you a beautiful user-friendly interface to report on however once you got your data and config correctly, I dont see why you cannot go ahead and build a couple of good reports for business critical processes.
    cheers

Maybe you are looking for