Requirement for surcharge if order value under a specified amount
I am trying to create a surcharge that will only apply if the overall value of the order is under a specified amount.
The objective is to add a surcharge of $50.00 if the total order value is less than $500.
Any insights are appreciated.
Thanks
TC
Thanks Sai.
I followed your suggestion and it is working, thank you.
Now one more twist.
We have a pricing condition for pallets and other container items included in our Net Value sum. It is located above the actual price conditions in the price procedure. I would like to exclude the value of these from the document total in order to determine whether or not to apply the surchage.
For example:
Pallet charge is $50.00
Sales order value: $475.00
Threshold value for apoplication of surcharge = $500.00
In the example above the surcharge would need to apply. Even though the net value of the order would be $$525.00, over the threshold amount.
This is an example of our pricing procedure.
Step Counter Cond. Type Description
106 0 ZPAL Pallet Charge
114 0 PR00 Price-Cust Specific
116 0 ZPR8 Zone Pricing
118 0 ZPR9 Price List
120 0 Net Value for Item
125 0 ZMDC Min. Value Charge
I need to exclude the ZPAL conditon value from the amount in which to base my surcharge on. One issue is all of the standard subtotals are in use and unavailable in this instance.
I hope I am clear.
Thanks
Similar Messages
-
View requirements for delivered sales orders in MD4C.
MD4C shows requirements for open sales orders and other related data but if a delivery has been created for the order which covers complete sales order item quantity it is excluded in the report.
I want to view such requirements too. Is there a possibility of the same and how?
Or any other transaction where this can be seen?
Regards,
Sonal MurbadeHi,
When a delivery is completed (e.g. bu PGI). the requirement is not needed any more and it's deleterd in table VBBE or VBBS, so, you can not see it in requirement list any more.
You sill can see the order in table VBAP(sales order) or table LIPS (delivery).
BR -
How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
Check Content:
Verify all accounts require passwords.
Run the DUMPSEC utility.
Select "Dump Users as Table" from the "Report" menu.
Select the following fields, and click "Add" for each entry:
UserName
SID
PswdRequired
AcctDisabled
Groups
If any accounts have "No" in the "PswdRequired" column, this is a finding.
Some built-in or application-generated accounts (e.g., Guest, IWAM_, IUSR, etc.) may not have this flag set, even though there are passwords present. It can be set by entering the following on a command line: "Net user <account_name> /passwordreq:yes".Hi Malik,
How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
Please contact SystemTools Technical support to get more efficient support regarding this matter:
http://www.systemtools.com/support.htm
http://www.systemtools.com/toolboard/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
QC51:No certificate is required for the purchase order item
Dear all.
I want to create an certificate Receipt In the T-CODE QC51.After input the purchase order and item and press return,the SAP show an error message:
No certificate is required for the purchase order item.
Message no. QC508
My question was where to control the purchase order item to require certificate or not?
Regard
YodaHi
For this you have to maintain Certificate req in Material master.
MM01>Enter your material->Quality view-->Tick on QM procurement->Certificate require-Mension kind of certificate req.
like
E21 Cert. of conformity "2.1" EN 10204
E22 Test certif. "2.2" EN 10204
E23 Works test certif. "2.3" EN 10204
E31A Insp. certificate "3.1.A" EN 10204
E31B Insp. certificate "3.1.B" EN 10204
E31C Insp. certificate "3.1.C" EN 10204
E32 Inspection report "3.2" EN 10204
Q001 Conformance Report
Q002 Plating Certificate
Q003 Test Report
Q004 Certificate through Web
Q005 Chemical / Physical Test report + QC
etc.....
Customizing for this can be done in
SPRO->Quality Management->QM in Logistics--->Define Keys for Certificate Processing.
This will ask you during MIGO or during UD/confirmation possible thro' QC21
Regards
Sujit S Gujar -
BADI-User exit required for updating Purchase order header field -IHREZ
Hello All,
We have requirement in our business to update the purchase order header field "our reference" EKKO-IHREZ with some text field. We need a BADI/user exit that can be used for updating this field . We have checked the BADI ME_PROCESS_PO_CUST and unfortunately we are not able to use this BADI as it getting triggered in enjoy SAP transactions ME21N , ME22N etc. We are not creating the purchase order manually and we are using ME59N for creating Purchase order . Hence we are looking for some user exit/BADI that can be used in ME59N for updating the purchase order header field IHREZ.
Thanks in advance for your immediate response .
With regards,
Joseph Anand BTRY using the exist u2022 EXIT_SAPLME59_001
You can also later on add this field by BAPI_PO_CHANGE -
Analysis ABC for material's ordered value
Hi all!
I would like to have an ABC analysis (for each Vendor) of the value of materials ordered in a certain period.
If I utilise the report ME2L o ME81N, ok , i have the possibility to have the analysis ABC, but this analysis lists for each vendor the different Purchase Orders and repeats each material more than one time.
Can i have the possibility that this analysis add together the values of the same material.????
Now Sap give me this (for example)
ABC Mat group Material Vendor Purch order Value
A GM-HAL M2510008193 2101060 20000674 0,22
A GM-HAL M2510008193 2101060 20000683 0,22
A GM-HAL M2510008180 2101060 20001485 0,28
A GM-HAL M2510008180 2101060 20001257 0,28
BUT I DON'T WANT THIS!!!!!!
I would like to have:
ABC Mat group Material Vendor Purch order Value
A GM-HAL M2510008193 2101060 20000674 0,44
A GM-HAL M2510008180 2101060 20001485 0,56
Each material has to appear once only!!!!
Is it possible?
Have I to use other reports?
Thanks in advance!!
Best regards
AlbaTry these reports
MC$4 , MC$6 -
BEx calculation for 'average sales order value'
Hi all,
Can someone tell me how to use BEx query function to compute the <b>'average sales order values' by month</b>? Thank you.
J.Hi John,
You've two characteristics in the rows, right? Calendar Month and Order Type.
Try the option Calculate Result as Average of All Values and
Calculate Single Value as Nothing Defined? See if this works.
Or else in Modelling,
In the Info Object Create/Change screen, you can specify an Exception Aggregation based on
<b>Aggregate Reference Characteristic</b> Calendar Month.
I think there's an option for Average Values in the <b>Exception Aggregation</b> tab.
For more Information,
http://help.sap.com/saphelp_nw04/helpdata/en/75/21054da1392649948e5b94e4fc4bce/content.htm
Hope this helps.
Regards
Hari
Message was edited by: Hari Krishnan K -
Process order required for each sales order without mrp run
Hi, it is mto scenario. wants system to create a process order for each sales order without running mrp. please advise is it possible? if possible please guide what settings need to be done. Thabk you.
HI
You can create production order with reference to sales order using t code CO08.
Check and revert
Regards
Anupam Sharma -
Settlemnt Required For Bulk Work Orders
Hi All,
How to create settlement rule for Bulk Work Orders?
Is there Any T-code is there
or using LsmwSettlement rule can be created during Order release or TECO. By defining Settlement Profile, Allocation Structure with Default Object, appropriate details in Equipment / Functional Location Master data, will do the trick.
Order release or TECO can be done in mass in IW38.
If you have any other settlement rule different than these settings, then you should use LSMW. -
Two deliveries required for one sales order
Hello Friends,
I have a quirey , I have two types of goods in one sales order, one is dangerous goods and other one is normal. How ever we are thinking to make two seperate deliveries even they are in one sales order. How can two diff deliveries gets created.
We are planning to create new shipping point with new loading group for the dangerous goods .
Will the above decision works or is there any simplest way to create two auto deliverys for one sales order.
Reg.Hi all,
I have yet another proposal - using copy control and adding there dangerous goods profile LIPS-PROFL as split criterial. This field is populated originally from material master MARA-PROFL field. You can check for example routine FV50C201. Split criteria are defined in likp-zukrl field.
I think that is better solution then introducing new shipping point. Because there are some determinations and dependencies related to shipping points. So the more shipping points you have, the more additional config you have. If it is needed by business to have separate shipping points - then fine. But if the goods are shipped from the same place, then I would rather modify copy control instead of multiplying config and master data. I say duplicated effort in master data - because with 2 shippiong points you would need to maintain DG profile field and additionally loading group.
Kind regards
Witek Prawecki. -
Function module for reteriving Purchase order values
hi,
I there any function module for reteriving the Purchase order Valuesbetter to put ur logic /requirement on table EKKOEKPOEKBE.
Regards
Prabhu -
Variant settlement required for selected Production Orders
Hi Experts
I am using KO88 for individual settlement of Production order
Using CO88 for collective settlement
Now I need to reverse selected orders. Is there perhaps a settlement like K08G (int order/PM)
It must be able to take a variant that I will download these Production orders?
Please help ASAP
Many thanks
DawnDawn-
I know that there is no transaction code that you can use to reverse multiple production orders settlement. But, look at this program "RKO7CO88". This is the settlement program where you can plug in individual order numbers and it also has an option to select reverse settlement. I would test once in your test system before doing it in live system.
Hope this helps.
Shail
Edited by: shailender dhanasree on Nov 3, 2011 4:04 PM -
Help Required for populating proift center values in FS10N
Hi SAPientz ,
I am working on dynamic selection to populate screen fields of transaction FS10N from my program. I am developing a custom program where by when user enters G/L account number, Company code and fiscal year it submits the value to fields in std SAP transaction FS10N.
In Fs10n transaction in the application tool bar there is an icon called(free selections). when i click i find a profit center field .
How do i populate that profit center field with values from my custom z table. is there any badi or uer exit that can solve this
thanks in advance,Hi Karthi ,
I am able to get following fields in this
G/L account
Company code
Fiscal year
Business area
No , icon free selections.
These all are with parameter ID , so if execution is in some particular order (after Z program) , the try to set the parameter id and check.
Regarding , user exit/badi/enhancement , debug and reach the part of code which is executed after this icon free selections is pressed and try to find one before this execution and code and in this , fetch the desired record from Z table.
Hope this helps you. -
Fields required for linking production order with sales order
I need to link production order and sales order to get the part no#. need to see in md04.
The link between production order and sales order can be made by using the KDAUF KDPOS fields of AUFK or AFPO and linking them to VBELN and POSNR of VBAP.
Regards,
Rich Heilman -
Requirement for add a journal entry of unbalnce FC amount
Hi,expert !
I want to add a journal entry of unbalnce FC amount.
for example: assume the exchage rate is 1.5
AccountNo Debit(FC) Credit(FC) Debit Credit
1001 usd 100 150
1002 150
How can I make it ? Any help is appreicated . Thank you in advance.Hi,
There is a master setting inorder to allow unbalanced transaction in the journal entry.
Administration->System Initialization->Document setting->Per document tab->Select Document-Journal Entry
Uncheck the option 'Block &Unbalanced FC Journal Entry' and update.
This will allow you to add unbalanced transaction.
If you need to make a single manual journal entry,Open Journal entry window->Go to form setting->Document tab->General tab-'Allow Unbalanced Transaction in FC',select this option.
Hope this is helpful!
Maybe you are looking for
-
My ipod is sync'd to my son's pc, which he no longer has. How do I now sync my ipod to my pc so I can download music from my itunes?
-
BIEE Pivot Table Pie Chart Error
When we use pivot table and views in BIEE (Measure labels in the Rows), the label of the pie chart will only display the first measure name. There are only color box no text from the second measure name. Does any one know how to fix this issue?
-
Smartform Table Line types duplicate entries problem
Hi , I am getting one strange problem in Smartforms. i tried for information in SDN but i did not get any usefull ones. I have created my main window with particular width. I created two different Line types. On particular condition i need use these
-
PC broken - how do I get songs from iPhone 3G to iTunes in new PC?
The laptop I had installed iTunes for my iPhone 3G on has gone to PC heaven so I have purchased a new laptop PC. Can I install iTunes on the new PC and connect my iPhone to it without deleting all the songs in my iPhone?? The old laptop won't even sw
-
Azure Batch - What is the enumeration of OSFamily?
Hi there, I am looking through the Azure Batch example code: http://azure.microsoft.com/en-us/documentation/articles/batch-dotnet-get-started/ And I see: ICloudPool newPool = pm.CreatePool( PoolName, osFamily: "3", vmSize: "small", targetDedicated: N