Requirements class is not defined

Hi,
if I try to add a new item to a contract, I receive the message "Requirements class y1 is not defined".
I double checked the whole requirement customizing and y1 is there and also assigned to the item category determined.
Does anyone know what's the problem?
Best Regards,
Florian

Well, mysterious but I deleted and recreated the whole requirement class and it works.

Similar Messages

  • Class type not defined for this object type

    Hi Friends,
    Could u please guide me ?..We have a requirement to extract some data from classification system.
    This is related with class type 023 - Batch
    I want to use the following parameters in CTBW.
    basis datasource :Z_BATCH_ATTR
    class type : 023
    object table :MCHA
    Datasource type : ATTR
    I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
    The only way I'm being able to make this work is changing object table from MCHA to MCH1.
    This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
    Do you know what should I do to solve this?
    Thanks in advance

    Hi,
    I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
    As I'm trying to extract Batch attributes from "AUSP" Table.
    I have given class type= 023
    Obj Table= AUSP
    But not sure which "basis datasource" I need to select.
    Thanks,
    Satish

  • Error in conversion-applet class is not defined!

    Hello everybody.I have created my own applet and I try to test it in a simulation world ,using the Java Card Toolkit 2.1.1.
    I have declared AID of my applet in the jcwde.app file as following:
    ///The code in the jcwde.app file
    com.sun.javacard.samples.wallet.Wallet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x6:0x1
    //Declare my applet
    com.sun.javacard.samples.myapplet.myapplet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x7:0x1
    /////End of the code
    In the first line of this file there is the AID of the installer also.
    As you can see from the above file, the only difference between th wallet and myapplet is the second byte from the end.
    Then I tried to compile(was successful) myapplet and then converted.When I try to convert(I also create an .opt file which has the above address of myapplet), I received the message:
    error: com.sun.javacard.samples.wallet.myapplet class is not defined in package com.
    sun.javacard.samples.wallet.myapplet.
    conversion completed with 1 errors and 0 warnings.
    I will give the .opt file also:
    /////code of the opt file
    -out EXP JCA CAP
    -exportpath ..\api21
    -applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x7:0x1 com.sun.javacard.samples.myapplet.myapplet
    com.sun.javacard.samples.myapplet
    0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x7 1.0
    /////End of opt file
    What do you think I am doing wrong?Is any other file(like the jcwde.app file) that I have to declare the AID of myapplet?
    I will apreciate any help.
    Thank you.

    The converter informs, that it can not find your applet in >the specified package. Have you really specified a >package in a java-file?
    myapplet.java:
    package com.sun.javacard.samples.myapplet
    your applet code.
    Try to specify parameter -classdir in the .opt file:
    -classdir <the root directory of the class hierarchy>Hello and thank you for replying me.
    Yes,I define the package as you wrote me.I try also to use the -classdir option.But I have this similar problem again.The DOS commmand line appears the message(After the execution of the command->jcwde -p 9025 jcwde.app):
    java.lang.ClassNotFoundException: com.sun.javacard.samples.IMSIapp.IMSIapplet
    jcwde terminating on receipt of SimulationException. See previous messages fo
    cause.
    Exception in thread "main" com.sun.javacard.jcwde.SimulationException
    at com.sun.javacard.jcwde.MaskedApplets.getInstallInstance(MaskedApple
    .java:233)
    at com.sun.javacard.jcwde.SimPrivAccess.getROMApplet(SimPrivAccess.jav
    146)
    at com.sun.javacard.impl.NativeMethods.getInstallMethod(NativeMethods.
    va:314)
    at com.sun.javacard.impl.PrivAccess.initialize(PrivAccess.java:281)
    at javacard.framework.Dispatcher.cardInit(Dispatcher.java:226)
    at javacard.framework.Dispatcher.main(Dispatcher.java:63)
    at javacard.framework.JCWDEDispatcher.main(JCWDEDispatcher.java:28)
    at com.sun.javacard.jcwde.Main.run(Main.java:85)
    at com.sun.javacard.jcwde.Main.main(Main.java:148)
    It did not recognize the directory(IMSIapp is the directory of my clas,java,opt file) and IMSIappplet is the java card applet code.
    What did you think is the wrong?
    I am waiting for your(or any reply).
    Thank you.

  • Consumption indicator PIR Requirement class

    In OMP6 and in md61 user parameters settings, i see these following options for consumption indicator for requirement class
    Consume only with customer requirements
    Only consume reservations, dependent requirements
    Consume customer reqmts, reserv., dependent reqmts
    Flexible Consumption for Different MRP Elements (BAdI)
    No Allocation
    but in "define strategy" configuration node, I see different options for consumption indicator for the same requirement class
    No consumption with customer requirements
    Consume planning with assembly
    Consume planning w/o assembly
    Consume planning material (w/o assembly)
    what is the difference?

    Hi Swathi,
    I hope my explanation can help you.
    consumption which you set in planning strategy and per requirement class has different function.
    as we know, consumption in planning strategy has option:
    No consumption with customer requirements
    Consume planning with assembly
    Consume planning w/o assembly
    Consume planning material (w/o assembly)
    This option has function if your planning will be consumed by sales order or not.
    No consumption with customer requirements -> this consumption make your planning will not cosume by customer requirement, such as using strategy planning make to stock (strategy 10)
    Consume planning with assembly                  -> This consumption make your planning will be consumed by customer requirement
    Consume planning w/o assembly                   -> This consumption make your planning will be consumed by customer requirement, but only use for planning without assembly (strategy planning 50)
    Consume planning material (w/o assembly)   -> This consumption use for planning with planning material (Strategy 60)
    Consumption in requirement class, is to define what kind of requirement will be consume PIR. (This indicator will be usefull if you set consumption in planning strategy) :
    1. Consume planning with assembly
    2. Consume planning w/o assembly
    Actually, for planning strategy planning with final assembly (strategy 40) and planning t/o final assembly (strategy 50) consumption indicator will be set to 1 (consume only with customer requirement).
    for strategy planning, planning at assembly level with final final assembly (strategy 70) and planning at assembly level w/0 final final assembly (strategy 74) consumption indicator will be set to 2 or 3 . why strategy 70 and 74 is set to 2 or 3, where will be consume by dependent requirement and reservation?
    because with strategy 70 and 74, we plan not the finish good, but in semi finish good level.
    so if we already plan in semi finish good, and there is requirement for semi finish to produce finish good, PIR that already create before (in semi finish level) must be consume with dependent req/reservation of finish good (to prevent duplicate production order in semifinish good).
    Cheers,
    Subandi Widjaya

  • Costing Sheet in requirement class for Sales Order costing

    Hi Experts,
    Could you please explain me the necessity of costing sheet in requirement class configuration.
    There is a field for costing variant in requirement class. I hope costing sheet can be taken from that costing variant.
    So what is the purpose of costing sheet in requirement class and could someone explain me the use of that field in requirement class.
    What happens if the costing sheet in requirement class and costing sheet in costing variant mentioned in requirement class does not match.
    Thanks.
    Edited by: DSK on Dec 18, 2011 3:21 PM

    Costing Variant is assigned to Requirement class
    Requirement class is assigned to Requirement type
    Requirement type is assigned to Planning Strategy
    Planning strategy is assigned to strategy groups
    Strategy group is assigned to MRP3 tab in Material Master
    System picks the costing sheet in requirement class
    In this way product will be costed for Make to Order sale order costing.
    Srinivas

  • Requirment class in ECC and APO

    Hello,
    I need to know how requirment class in ECC is t/f to APO.
    For instance if we create a new requirment class ZE. Do we need to create similar ZE check mode in APO.
    Or
    the requirment class will be CIF'd. If yes how. requiremnt class becmes check mode in APO.
    regards
    Pamela

    Hello Brahmankar
    But there are many ways a requirement class gets determined in SD module in ECC. One is the way you have told in T code OPPS.
    but sometimes the requirment class is determined based on  requirment type . requirment type is based on  item category + MRP type .  ( req type=item cat + MRP type ) and then  requirment type is assigned to requirment class. This is how  requirement class gets determined in sales order in ECC.
    So  what if requirment type and requirment class is not in material master and is determined thrugh item cat + MRP type ?
    regards
    Pamela

  • Using library defined classes or not

    I've an existing class in my program named Document.
    and I am using a Dom4j library which so happens have the class Document as well...
    Now, my program runs into a conflict such that within this class, let's call it "processfiles.java" it requires both Document class to be used.
    I knew to call the library's class, all I need to do is to use org.dom4j.document... etc...
    but my user-defined Document class also points to the org.dom4j class implicitly hence it couldnt finds the method that i want to execute..
    how can i change my code such that I am refering to MY Document class and not org.Dom4j.Document class??
    Greatly appreciate any help.

    so can i assume as long as these classes does not import org.Dom4j.Document, i wouldn't need to refer to these Document class using my package name?correct
    currently all my java files reside in a root folder called test...may i know how should i name my package as?you wouldn't specify a package then in that case. This is generally discouraged tho. but in that case, if you need to use both kinds of Documents, don't import either, just specify
    org.jdom.Document
    and
    Document
    in the code

  • Shared library extended class Error #1065: Variable is not defined

    Right, bit of a complicated set-up  here. I've got a class structure which includes the View class:
    com.website.buttons.MyButton
    Then i've got a shared library swc called sharedassets.swc  that contains a MovieClip in the library that uses  'com.website.buttons.MyButton' as its 'Linkage Properties' base class,  extending with the following empty class:
    com.website.timeline.sharedassets.BackButton
    Then i've got a second  swc that  imports the BackButton mc into its own library as a shared library asset, and uses an instance of  it on the stage in a MovieClip of it's own called LinearNavBar.  LinearNavBar's Linkage Properties are thus:
    Class: com.website.timeline.sequence.LinearNavBar
    Base class: com.website.navigation.LinearNavbar
    Again, 'com.website.navigation.LinearNavbar' is an actual class in the code base, whilst 'com.website.timeline.sequence.LinearNavBar' does not exits (ie: its dynamically created by the swc at compile time). 'Automatically declare stage instances' is unchecked
    Over in the class structure in my  Flash Builder project, I've got another class
    com.website.navigation.Sequence
    Which instantiates a new version of  LinearNavBar and adds it to the stage:
    var navBar:Navbar = new LinearNavBar();
    addChild(navBar);
    At which point the following error is  shown:
    ReferenceError: Error #1065: Variable BackButton is not defined.
    It seems Flash Builder cannot find 'com.website.timeline.sharedassets.BackButton', even though BOTH compiled swcs are included as part of the projects.
    What gives, my friends? I am most heartily perplexed.

    I have on the permit debugging option but it says nothing but these errors
    ReferenceError: Error #1065: Variable Button is not defined.
    ReferenceError: Error #1065: Variable ComponentShim is not defined.
    ReferenceError: Error #1065: Variable LoaderProV3AS3 is not defined.

  • [svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

    Revision: 16929
    Revision: 16929
    Author:   [email protected]
    Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
    Log Message:
    Add a class that will register the required class aliases in the event the mxml compiler generation  [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
    Add a reference to this class in the RPCClasses file so it always gets loaded.
    QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
    Bugs: Watson bug 2638788
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
    Added Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

    Great exercise to document the problem like this.  It got me thinking about how an app with modules would be different from an app that does not use modules.  Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked.  I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

  • Message no. B1402- Table KONP for object class COND_A is not defined.

    Hi
    I m using BD52 transaction for message type COND_A and am getting this error for table KONP saying it is not defined for COND_A.
    Can you please let me know which transaction is used to update this information.
    Thanks in advance
    Sana

    In note 309342, for error message no.B1402, following solution is given.
    Solution
    The system issues warning message B1402 " Table KONP for object class COND_A does not exist" for each entry with table KONP and you can ignore this by pressing Enter respectively. Then you can maintain the entries or navigate.
    If the KONP entries bother you since you use Transaction BD52 frequently, you can remove them manually. To do this, you can also use Transaction BD52. The functions are not changed by this deletion. However, the issue of the bothering warning message is suppressed. Table TBD62 is client-dependent that is, you have to make the correction on each active client.
    A related problem exists with table TBD22. During the setup of reductions (that is, new output types which only send a subset of the data of output type COND_A), the corresponding entries in table TBD62 (Transaction BD52) are generated from table TBD22. To avoid the same problem as described above with the new output types, remove the entries of TBD22 with MESTYP COND_Y and CDTABNAME KONP. You can do this with the help of view V_TBD. Transaction SM30, as an output type, select COND_A. Here, remove all entries with segment type EKONP and table name KONP.
    Table TBD22 is client-independent.
    A correction of tables TBD22 and TBD62 by means of an R/3 Support Package is not possible since the tables have delivery classe 'G'. SAP cannot delete entries in the tables.
    thanks
    G. Lakshmipathi

  • Class type 022 is not defined for object for BATMAS

    Hi Experts,
    while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
    Business Object      BUS1001002
    Method               SAVEREPLICA
    Message Type         BATMAS
    Basic Type           BATMAS03
    Pleas guide how to resolve the error.
    Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
    Please guide on this also.
    Regards.

    Hello Jass,
    Symptom
    The BATMAS03 basis type (message type BATMAS) /FB BAPI_BATCH_REPLICATE  cannot transfer any classification information. Please review note 1070634.
    First Option :
    You should first transfer the batmas and then the clfmas idoc.
    Second Option :
    You could create the batch together with classification. Normally the problem is the missing CUOBJ_BM in table MCH1. It is not necessary in all situations that the field have to be filled, but it can be in some cases (And it is better to store the right  information in the corresponding fields). Especially when you transfer batch/classification information in other system the field have to be filled.
    The way to create the batch TOGETHER with classification by using BATMAS IDOC is to set the following parameters correctly :-
    set E1BPBATCHCTRL-DOCLASSIFY to X and fill the segments with relevant classification information
    E1BP3060_ALLOCATION
    E1BP3060_VALUATION_CHAR
    E1BP3060_VALUATION_CURR
    E1BP3060_VALUATION_NUM
    In this case the field mch1-cuobj_bm should be filled with correct CUOBJ. You can also use function module BAPI_BATCH_SAVE_REPLICA to create batches together with classification.
    Hope this information helps
    Regards
    Amber

  • Class type 022 is not defined for object for batmas in LSMW idoc

    Hi Experts,
    while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
    Business Object BUS1001002
    Method SAVEREPLICA
    Message Type BATMAS
    Basic Type BATMAS03
    Pleas guide how to resolve the error.
    Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
    Please guide on this also.
    Regards.

    Hi,
    Go to TCode OMCE and check the batch level.
    If batch is activated at material/client level then use class type 023, if it is at plant level the class type 022.

  • JDev 10.1.3 / Ant / element classes not defined in parent war

    I tried to build a WAR file with Ant in JDeveloper 10.1.3 (Preview). The source of the build.xml:
    <?xml version="1.0" encoding="windows-1252" ?>
    <project name="MyApp" default="war" basedir=".">
    <target name="init">
    <tstamp/>
    </target>
    <!-- ... -->
    <target name="war" depends="init">
    <war destfile="../deploy/myApp.war" encoding="Cp1252" webxml="../public_html/WEB-INF/web.xml">
    <classes dir="../classes"/>
    <lib dir="../public_html/WEB-INF/lib"/>
    <webinf dir="../public_html/WEB-INF"/>
    <metainf dir="public_html/META-INF"/>
    </war>
    </target>
    </project>
    I got 3 error messages, which do not correspond to the Ant documentation:
    - element classes not defined in parent war
    - element lib not defined in parent war
    - element webinf not defined in parent war
    That's why I'm not able to build a war file for deployment.
    Is there any chance to bypass/correct the errors?

    This bug has been fixed for the Production Release. There is no workaround in the Preview Release. However, these errors should only appear while editing the Ant buildfile. They should not prevent you from running the buildfile.
    -Matt Hawkins
    Oracle JDeveloper

  • Why would I get ReferenceError #1065: "Variable title is not defined."

    Well of course it's not defined.  It's a dynamic class, and strict mode compilation is turned off so that I don't have to declare the property to compile it.
    I've created a library item named "Page" with a single TextField instance named "title".
    Page's class is defined in an ActionScript file, and it's assigned to the library item in export for ActionScript.
    Page's ActionScript file defines the class as a "dynamic" class, so I should not be getting this runtime error.  I turned off strict mode compiling, since it seems to be designed to check the presense of property definitions at compile time for dynamic classes like MovieClip.
    public dynamic class Page extends MovieClip
        public function Page()
            super();
            var text:String = title.text; //title can be moused over in the debugger here and shows the correct value, but the flash player throws a runtime error when it tries to access it, but it shouldn't because this is a dynamic class.
    So why am I getting a runtime error for the field "title".  It makes no sense, because if I step to that line in the FlashDevelop debugger and hold the mouse over "title", it shows that it is in fact the instance of the TextField that I'm trying to access.  Yet the player throws an error when I actually try to access it.
    Is it a problem or limitation with the access style (i.e. would it work fine if I accessed it as "this.title" or "this["title"]"?

    Nevermind.  This was apparently a browser caching issue.   The Page base class is defined in the main interface swf, and is externally referenced through its swc in an external "lesson" file that declare a subclass of Page.  It was this custom subclass of Page which was throwing the error (basically the same as the simplified example I wrote for my post, where it simply tried to access "title" as a dynamic property of the Page).  What happened is the browser was caching an old version of the lesson file with the old definition of the class that was not declared as dynamic.  I had received the error before, then updated the class, then I was surprised to see the error persist.  It suddenly dawned on me that the browser was probably caching the old version, so I cleared the cache and it seems to work fine now.
    Actually, it is a problem after all.  I forgot I had updated it to use "this.title" syntax on the page I tested after clearing the cache, but the other pages that try to access title directly as "title" still throw the error.  So it seems to be some sort of quirk in how flash accesses properties of a dynamic class.  If you try to access them direclty, it must do so in a way that requires the property to be defined, but if you access it via "this.title" or this["title"], the it seems to resolve the property value without throwing the error.
    This sucks.  I was really trying to not have to write "this." for every property.  The entire display list is dynamically generated from some custom XML that allows me to call constructors and set complex type-safe properties, and during construction it was copying each item into a Dictionary by name.  This Dictionary was then assigned to the page class as "items", so I was accessing each display object as "item.name".  Then I got the brilliant idea of just making Page and its subclasses "dynamic" so that I could just add the DIctionary values on the Page instance itself.  I thought I would be able to access the dyamic properties just by their name such as "title", but lo and behold, Flash strikes again, and I have to use dot notation anyway.  What do you all think?  Any solutions?

  • ReferenceError: Error #1065: Variable flash.media::VideoCodec is not defined

    Hi
    I seem to get thisexception fired when launching my flex project from debug optoon.
    ReferenceError: Error #1065: Variable flash.media::VideoCodec is not defined.
    I have created a version of flex 4.5.1 with folder 11.0 in player folder. This has the latest flash player global swc renamed as playerglobal.swc. All is well when compiling, but when running i seem to that exception.
    Also my compiler settinsg are set to 11.0.1
    What is going wrong ??

    Hi,
    SoundCodec class is defined in Player 10. Are you using the
    player 10 afcs swc ? If so, you need to change Require Flash Player
    Version unser Project->Properties->Flex Compiler in Flex
    Builder and put that to 10.0.0 and also make sure that your browser
    has player 10 and you Flex SDK also supports player 10.
    And if you are using afcs 9 swc , then put 9.0.124 or
    something in the Require Flash Player Version and that should fix
    the problem
    Thanks
    Hironmay Basu

Maybe you are looking for