Rescuing shots from a graded Color seq with shots on both V1 and V2

Hi guys
I could have sworn I watched a Lynda tutorial that showed it was okay to use both V1 and V2 before sending to Color 2.0.2. On forums since I have now realised that only V1 is really the only way.
Anyway, since sending back to FCP I have some shots which have flashed, ungraded, weird-looking frames of the beginning of each of the faulty shots. i tried 'send to FCP' a few times but still get the wonky-weird frames at the beginning of each of the shots.
I brought the original shots into a new FCP seq, sent to Color, graded them, then rendered (no signs of weirdness) and sent back to FCP. However, when I tried to incorporate the same shots into the main previously graded sequence the weird fault appears again on the freshly, individually-all-graded-using-only-V1 shots.
What can I do please to get rid of the weird flash?
Thanks in advance!
Peter

That could be it JP - a bug in the handles.
Could you reread my previous post - I had edited it to include an extra paragraph at the end and reposted just as you did your most recent post please.
The extra bit I did is a description of how the problem appears to remain regardless of handles, but I'm hoping it will go away if I rerender all the shots without handles?
I'm rerendering all my shots with handles set to 0 right now. Fingers crossed!
Just to update:
I have changed my handles to 0 and am all set to re-render. However, I notice the weird flash remains at the beginning of some shots...let me describe...
In the COLOR timeline if I use the down arrow to move to a shot. Once on this shot, if I press the left arrow once I move back one frame and I see the weird warped image (either too high contrast or some other funkiness). Weird thing is, despite the contents of this frame belonging entirely to the shot I originally 'down-arrowed' to...the previous shot becomes selected?!

Similar Messages

TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
 Cheers, Tom

Color discrepancy with imported PSD between Motion and FCP

I've got a Motion project with an imported PSD file as a background element (the PSD was created in Photoshop CS2 for Windows, running under Parallels).
The PSD file consists of two overlapping curved shapes, one blue, one green (part of our corporate look). The colors (RGB) match our official guidelines.
I imported the Motion project to FCP and placed it on the timeline, on V1. In FCP, I then used a color generator to create a small blue rectangle which would serve as a border for a slightly smaller thumbnail image that would get overlaid later on. The rectangle is on V2. I used the exact same RGB values for it as I did in Photoshop for the curved shape.
Trouble is, the blue color in the shape that got imported into FCP inside the Motion project doesn't match the generated color.
See this screenshot, in FCP:
http://elamaton.no-ip.com/~jarkko/colordiscrepancymotion.png
Three blues: leftmost, the color generator resized to a small rectangle; on the center, the shape that I created in Photoshop and imported into a Motion project, dropped into FCP; rightmost, an instance of Photoshop CS2 running in a virtual WinXP in Parallels Desktop. You'll notice that the blues of the generator and Photoshop match, but the middle shape that travelled the CS2->Motion->FCP route is a different shade.
Narrowing it down further, I decided to import the PSD file directly into FCP (just to see if it'd match - it needs to go through Motion for the final product). Here's a screengrab of Canvas this time:
http://elamaton.no-ip.com/~jarkko/colordiscrepancy_motion2.png
Again, from left to right: the generated rectangle, the directly imported PSD, the PSD in the imported Motion project. The first two match, but something in Motion or the Photoshop->Motion route screws up the colors of the blue-green shape (as well as the Työterveyslaitos logo on the top left, also a PSD, in the same Motion project). The blue shade is also incorrect in the Motion canvas, pre-import to FCP.
What's going on here, and how can I fix things?
The project settings are PAL DV in both FCP and Motion. No rendering has been done, I'm importing the .motn into FCP as-is.
Any help is greatly appreciated, deadlines loom...

First, double-check that your PSD is in RGB, but I suspect it it or it wouldn't even work in FCP. I suspect a gamma issue moving between the apps:
http://docs.info.apple.com/article.html?artnum=93794
You might try setting the colorspace in FCP to RGB or adding a gamma filter in Motion to adjust.
Mark

HT201272 I am a resident of Ecuador.I used to buy applications from the us apple store with an ecuadorian credit card and my address in Ecuador.

I am a resident of Ecuador with an ecuadorian credit card.I used to buy applications from the us apple store and updated them whenever updates were available with no problem at all. Since approximately a month,I am not able to purchase any new applicaton or update the old ones.Apple send me back to the ecauadorian apple store were there are almost no applications and where I can not even update the ones I have.
How can I solve this problem.? Before I was able too purchase applications anywhere in the world.This is absurd.
Can anybody help me please?
Regards,
Refurioso

You can't, you will need to be in the US with a US billing address (and credit card issued by a US bank) and iTunes account to be able to buy/download from the US store - the terms of use of the US store say (and other country's stores will be similar) :
The App and Book Services are available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the App and Book Services from outside these locations. Apple may use technologies to verify your compliance.
If there are apps that you want that aren't currently in the Ecuadorian store then you can try requesting that they be added, but ultimately it's the app developers that will have to grant Apple a license to sell them there : http://www.apple.com/feedback/itunes.html

Which models of iphone 5c and 6 will work with lte in both Israel and russia

I'D like to know which models iphones 5c and 6 will work correctly in both countries Russia and Israel?

JP Ellery wrote:
The models that will work with brazilian LTE networks are:
A1507 and A1529 (iPhone 5c)
A1457 and A1530 (iPhone 5s)
JP
Have you personally tried those models with Brazilian LTE networks? Do they work? If so, fine. If not, then besides that, there is the problem of the warranty which is not international. The user will have to return the phone back to the country of purchase for both warranty and out of warranty service. So what might seem cheaper at first glance might not be in the end.
Anyways, it your money and the OP's should he want to go ahead with your recommendation.

HT201380 keep having scrolling problems with Maverick on both iMac and Mac Pro despite downloading mail software update

Have scrolling problems with Maverick despite downloading mail update on both IMAC and Mac Pro
Have to reboot and it helps for awhile then stalls again

The Mac OS X 10.4.7 Update introduced connection issues as a result of (according to the documentation) "Mail now supports connecting to mail servers through a SOCKS proxy". This probably has nothing to do with your problem, but it'd be worth going to System Preferences > Network and making sure the SOCKS Proxy is not enabled in the network configuration used to connect to the Internet.
Also, it looks like the crashes you're talking about are actually freezes, i.e. Mail becomes unresponsive rather than quitting unexpectedly. In Mail, open Window > Activity Viewer, and see whether Mail displays there what it's doing when it freezes. Actually, you may be able to avoid having to force quit Mail by canceling whatever it's doing (by clicking on the red stop icon of the activity).
Reinstalling Mail will probably accomplish nothing, but it might be worth reinstalling the Combo Update for the type of machine and the version of Mac OS X you're using (which you would have to do anyway if you wanted to reinstall Mail):
Mac OS X 10.4.7 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, and no applications should be running while installing it.

How do i share the purchases from my old itunes account, with my new itunes account and id?

My wife and i are getting divorced and I, i have had an itunes account for a few years. We recently switched my credit card infor for hers before the divorce decision. Now I have adjusted the account to give her the original account and I have created a new second account with my credit card information. I need to know how to make the purchaces from the original account avaiable to the new account.

Do you have your purchases on a backup drive ? If not then depending upon what country that you are in then you might be able to redownload some/all of your iTunes purchases via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes - what you can redownload will depend upon what country that you are in (music, films, TV programmes can't be redownloaded in all ; audiobooks and ringtones are one-time only downloads), and whether they are still in your country's store (rights-holders occasionally remove things).
If you do redownload an account's past purchases then you may tie that computer to that account for 90 days : http://support.apple.com/kb/HT4627 - so you won't be able to use iTunes Match or automatic downloads or redownload past purchases from another account until the 90 days have completed.

My iP5 will not play any track not purchased from itunes Store, red circle with red square inside appears and skips the track, any ideas?

my iP5 will only play songs purchased formmthe itunes store.
all over songs, uploaded from cd's on my laptop and dragged into itunes will no longer play, a red circle with a red square in the middle appears and skips the track.
anybody know why Itunes / iP5 will no longer play all tracks, has worked for years, only stopped with the latest itunes update.

Hey Kelsieee,
First, I would try to resolve the issue with the ! in a circle that you're seeing in iTunes. There's some steps in the following article that go over what that ! usually means and how to fix it:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Welcome to Apple Support Communities!
Best,
Delgadoh

How to stop Windows iTunes from spontaneously creating new folders with duplicate copies of songs, and renaming existing folders?

I've recently started using iTunes regularly to import CDs. Since then, I've found my Windows 'My Music' folder is behaving in bizarre ways.
I like to organise most of my music in folders by Genre --> Album title, without paying attention to Artist. I also like to rename certain album folders (and the Album name in each track's metadata as well, so that each album/folder remains consistent), and also to create customised 'mix tape' album folders. I just want to use Windows Explorer / My Computer to manage this; I don't want to do it via iTunes. I just want to use iTunes for initially getting the music from CD to computer.
Previously, when I was using Windows Media Player to import CDs, if Windows Media Player placed an imported CD under a folder category I don't use, such as Artist, I would just manually move the Album folder and delete the empty parent Artist folder. However these days iTunes is spontaneously creating an entire series of Artist folders, even for tracks and albums that were already on my computer, and is placing duplicate track files into them. Additionally, it's renaming albums for folders and tracks I've customised, turning album titles back into their original values. This is happening even though the destination for newly imported/downloaded iTunes tracks is not the My Music folder itself, but rather another folder within that one. I've had a look at Preferences --> Advanced and the 'Keep iTunes media folder organised' and 'Copy files to iTunes Media folder when adding to library' boxes are already unchecked, so it's not related to that anyway. How do I get iTunes to leave my folders alone?

First off see this user tip so should any further unwanted changes happen you have a chance to revert to your original layout.
It is not unknown for AV software to interfere with iTunes and corrupt its configuration files. If this happens iTunes can revert to the default settings to "Keep..." & "Copy...". Deselecting those options won't return any files to their original paths.
If you have "Show iTunes in the Cloud Purchases" enabled under Edit > Preferences > Store that can lead iTunes to download the original metadata for any of your purchases and show that instead of any edits you may have made to it. Turing that option off and restarting iTunes may reveal your version of the metadata.
There is another option under Edit > Preferences > Store that reads "Share details about your library with Apple" although I don't think that changes metadata in the way that the similar option in Windows Media Player does. Double-check your settings in Windows Media Player (Options > Library) to make sure it isn't set to "Retrieve additional information from the Internet". This is usually the cause of spontaneous tag resetting. WMP can be called into life in the background when visiting certain websites and it has a lazy cache, meaning it can sometimes write out metadata to your media files long after the data was originally acquired.
It is also work noting that mp3 files may contain multiple tags and iTunes, for one, treats these unpredictably. In some cases it may appear to accept and write out a tag change only to later read back the original unchanged data from another copy of the tag.
tt2

2610 LAN configuration with devices on both internal and external IPs

I am more than a bit rusty and reconfiguring a network due the arrival of a new SBS office server. The new office server (and clients) needs to connect to the Internet via our Cisco 2610 router. The server is say 10.1.1.10 and the FastEthernet0 interface on the router is set to 10.1.1.200. The 2600 has a Serial0 interface that is connected to a leased line with an external IP address. We also have our own class C IP range used for web, mail and dns servers.
So:
OfficeServer (10.1.1.10)<----->FastEthernet0(10.1.1.200)[2600 ROUTER1]Serial0(123.123.123.54)<---leased line--->ISP(Internet)
However, I also have a webserver etc in our office, with an external IP address from our range, that needs to, and can, see the Internet.
So, we also have, on the same router:
WebServer (90.4.123.35)<----->FastEthernet0(90.4.123.254)[2600 ROUTER1]Serial0(123.123.123.1)<---leased line--->ISP(Internet)
interface FastEthernet0/0
ip address 10.1.1.200 255.255.0.0 secondary
ip address 90.4.123.254 255.255.255.0
ip nat inside
speed auto
full-duplex
interface Serial0/0
description Connection to NTL
ip address 123.123.123.54 255.255.255.252
ip broadcast-address 123.123.123.55
ip access-group inboundfilter in
ip access-group outboundfilter2 out
ip nat outside
encapsulation ppp
no fair-queue
The FastEthernet0 interface has both an internet and external IP address mapped to it. Currently the office PCs use the external IP address as their gateway address and this works, however the new server is more secure and won't allow this.
There is NAT and access-lists running on the Cisco and each office PC has an internal IP address that is NATted to a dedicated external IP.
At the moment the webserver can see the Internet, but the office server cannot. Office PCs can see the Internet if they use the external IP address mapped to FastEthernet0/0 direct as their gateway address (although you get a message suggesting that this is not the way to go). So I am trying to resolve this whilst also trying to set it up better/properly.
What is the best way to do this (all assistance appreciated)?
Do I need to NAT the internal office server IP to an external IP address for it to see the internet?
Do I need to NAT the internal gateway address to an external IP address or will the router be able to route this anyhow?
Could it be DNS, so should I set the DNS server on the office server NIC to the ISPs DNS server, or to the Cisco

The best solution is to renumber the webserver to an internal ip address and configure a static nat on the router:
ip nat inside source static
http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/gt_ntsip.html
regards,
Leo

HT2693 after syncronization with my pc both pc and iphone are showing that phone could not be activated, because there is no sim in the slot

Sir, Yesterday night i was syncronized my iphone 3gs with my pc. after that operation my phone will not be activated showing error as cound not be activated because sim was not installed. but already I was inserted my sim in it. The phone is connected to my Pc and with my WiFi also. Plz help me to activate it

Not sure what this has to do with Apple TV.
Also this is a user forum, no one here can help with that. I would contact your carrier.

Colors change in objects in both RGB and CMYK formats

I've recently upgraded to CS6 and also to OS 10.8... Im working in multiple Illustrator docs using a color of 100-87-32-32. When I change objects to that color by keying it in to the color pallete, it changes. If I click off, go away and come back the color shifts to 100-82-36-29 or something similar.
Some objects retain and others shift. What gives?

Are you in the corect color mode?
File >> Document Color Mode >> CMYK when working in print
File >> Document Color Mode >> RGB when working in web or digital
Be careful when you make new document, flip down advanced to change to the desired color mode.

Installing WLS from the CD ( free CD with Bea book)

HI, I have not been able to install the wls from the cd I recd with the bok J2EE
application and BEA Weblogic.
/// MORE THAN THANKS ///

David,
I suspect that you are going to have a lot of problems related to the new book,
because the procedure I found on the BEA website did not work with the software
on the CD-ROM.
What did work was fairly simple:
1) Set up the PATH and CLASSPATH environment variables to point toward an existing
instance of jdk1.3 BEFORE installing WLServer6.0, so it can find the jdk.
2) Install wlserver6.0 from the CD,
3) Download the license.bea file from the BEA website.
4) Copy the downloaded file into the c:\bea over the 'license_new.bea' file in
that directory. The 6.0 server
seemed (in my experience) to be completely disregarding everything I did to 'license.bea',
which made the instructions on the website useless to me.
David Felts <[email protected]> wrote:
UpdateLicense.cmd should be run from your BEA Home. Make sure you have
the JDK 1.3 bin
directory in your path to allow invocation of Java, and you should be
set. Run
UpdateLicense <new_license_file>, which will automatically update your
license.bea file
(make sure you have a license.bea file in your BEA Home before you run
this command so
the <new_license_file> can update the existing license.bea. The license.bea
file is
used by the server.
Donald Stadler wrote:
I got a copy of UpdateLicense.cmd from a colleague who previously downloadedWL6.0,
but invoking the command file throws an exception:
NoClassDefFoundError: com/bea/installer/registry/LicenseMerger
Either the installation program from the book doesn't work at all orit requires
some specific level of WIndows permission which I don't have by default.If the
CD requires admin permission, the CD page of the book (last page) doesn'tmention
it.
What do I do? Uninstall and retry?
Don
"Donald Stadler" <[email protected]> wrote:
According to the Web docs the UpdateLicense.cmd file is supposed to
be
installed
into the base Weblogic directory and available for use. The installation
program
on the CD didn't do that in my case.
Now what?
Don
"Donald Stadler" <[email protected]> wrote:
BTW, It's an honor to be dealing with one of the authors! I'm impressed!
It looks
a good book. BTW, does WL6.0 run under Windoze98. I'm thinking of
trying
it at
home. My work box runs Windows 2000.
"Donald Stadler" <[email protected]> wrote:
"Michael Girdley" <----> wrote:
What was the problem you found? Did you get the license from the
download
site?
Thanks,
Michael GirdleyHi, Mike. I'm having the same problem so I will pick this discussion
up.
I downloaded the 'license.bea' file and copied it into the base
directory
which
the instructions in the 'J2EE Applications and BEA WebLogic Server'book
said
to use, namely 'c:\wlserver6.0'.
Starting the Weblogic server did not work, so I went looking further.
I found
instructions to 'update' the license at:
http://e-docs.bea.com/wls/docs61/install/instlic.html#1036112
and renamed the 'license.bea' file to 'license.foo', then ran the
following commands as specified (I think this is what the instructions
meant to
do):
C:\wlserver6.0> set PATH=.;c:\JBuilder4\jdk1.3;%PATH%
C:\wlserver6.0> UpdateLicense license.foo
The error message was:
'UpdateLicense' is not recognized as an internal or external command,
operable
program, or batch file.
The problem may be in the PATH, as the actual instructions for amending
the PATH
were:
"set PATH=.\jdk1.3;%PATH%"
Unfortunately this would have pointed my path into a nonexistant
instance
of jdk1.3
located in the Weblogic6.0 directory, so I tried to be intelligentand
point it
to the actual instance of jdk1.3.
It seems to me that this either wasn't tested as a 'bare-box' installation
or
that the documentation was not written with the benefit of such
an
installation.
What is UpdateLicense and where is it located? Every day counts
when
you are on
a 30-day evaluation period!.........

Can you purchase an app from the mac app store with an itunes gift card

Can you purchase an app from the mac app store with an itunes gift card and if so how.

Yes.
Click Redeem on the right side of the MAS window under Quick Links.
Carolyn

The way I deal with error message 1417, 1418 and 1428

Firstly, sorry for my poor English, but I would like to share with you my experience, and hope that it may helps you.
Since the release and update of iTunes 7, I have not faced any problem, but I heard a lot of articles from this forum about the errors 1417, 1418, 1428 and 50 etc. I could not make any suggestion and find a solution about it, all I could do is to copy some threads from some successful cases mentioned on this forum.
Until yesterday, I finally received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
1. A window based PC
2. A Mac computer
3. An USB iPod cable
4. A Firewire iPod cable
5. An iPod AC charger
As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
How to reset iPod
http://docs.info.apple.com/article.html?artnum=61705
The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
I changed my mind, and put the iPod into disk mode
Putting iPod into disk mode
http://docs.info.apple.com/article.html?artnum=93651
Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore”, after a few seconds, an Error message pop-up with Error Message 1417, the sign that I have been waiting for quite sometime.
I ejected the iPod and the screen immediately showed a folder exclamation mark (a sign indicating a corrupted or a failure iPod OS). I am forced to put the iPod into disk mode again, connected with the Mac computer and open the Disk Utility
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
It managed to complete the Restore process, and started to sync with the iTunes. However, it got stuck at the song no.238 from the total of 2000. I left it for an hour, but with no process, instead the iPod became “Hot” and the iTunes showed an Error message of 1428. I ejected the iPod from my Mac computer, the iPod’s screen turn to show the famous killer icon;“The Sad iPod“.
This time it was totally dead, even failed to put it into Disk Mode and non of the computer could recognize it. Sigh, I hated to do it but I knew that I must did the following:-
Holding the iPod in my Palm, and hitting it on a surface of a Sofa with 5 attempts.
Did not surprise me, the iPod turned on and it showed the Language Menu on the screen. So, I put it into Disk Mode and connected with my window PC.
The PC showed a sign and indicated that an USB device had been connected with it. I opened the iTunes and did a Restore there.
However, an Error Message 50 showed up, but I were not worried about it, connected it back with my Mac computer with it in Disk Mode. As expected the iTunes opened and allowed me to do a Restore there.
This time it managed to complete the process and a window of register pop up. After the completed the process, the iPod started to sync with the iTunes again, which finally managed to complete the process.
I left it connecting with the AC charger overnight. In the next morning, I switched it on and have a play with it, I am so glad as it is working like a charm.
From the above experience, I would like to share it with the user the following:-
1. It always better to charge with an ac charger instead of the computer, as when an iPod carrying with very low battery, it may not able to get charge from a computer
2. Try to connect the iPod with a computer, switching between USB and Firewire
3. Try to format an iPod with HD problem, with a different kind of computer e.g. Mac or PC, as the formats are totally different, the way it formats may able to solve the bad sectors on the HD
4. It may get better chance to get your iPod recognized, if you put it in Disk Mode
I hope the following works in your case as I did.

a pop up error message says itunes couldnt be configured
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

Rescuing shots from a graded Color seq with shots on both V1 and V2

Similar Messages

Maybe you are looking for