Resize the number of rejected record in sqlldr

Hi,
I am using sqlldr to load my data. However, it is known that the data has lots of error. So when I load my data, after 50 rejected records, the sqlldr stops. It wouldn' load anymore.
Question: is there a way to specify the number of rejected record in sqlldr?
For sure the file that I need to load has max 200 bad records.
Thank you very much.

Set the ERRORS parameter to a high value.

Similar Messages

How to limit the number of seleted records?

Hi,
I have a performance issue in the context of SQL .
I used JDBC to excute a select statement. The number of found records might be too large (e.g. 10000). To display them, I set a marge (e.g. 50 ) It is fine for display purpose.
However, the execution of select statement took long time although I only needed 50 of them.
Is it possible to make the execution of SQL select statement only work until it found 50 records?
it seems that i dreamed. But maybe there is a walk around.
Regards,
PY

You could also try calling the Statement (or
PreparedStatement etc.)'s setMaxRows() method.when using Oracle, does it use the "ROWNUM < maxRows" to limit the number of entries or does it actually retrieve all the data from the database and only then limit the result to the requested amount?
THX

Counting the number of detail records at target side...

Hi
I have a requirement where i need to caluclate the number of detail records formed and add it in trailer section...both at target side...
The output will look like this :
<Detail>
    <Field></Field>
</Detail>
<Detail>
    <Field></Field>
</Detail>
<Detail>
    <Field></Field>
</Detail>
<Trailer>
   <Count> 3 </Count>
</Trailer>
Basically, In trailer the Count field will contain the number of Detail records.
Can this be achived by a UDF?? Please help!!!

Actually teh detail node formation at target depends on a lot of nodes of source side...using Count I have already done it but due to lot of nodes @ source side it becomes kind of a mesh...
Hence I was trying to figure out a way in which if I can count the number of detail nodes at target side I can remove the present mapping...
Corect me if I am wrong but can't we declare this target detail node as global variable and then use 'Count' function to capture its occurence???
P.S : In XI 3.0 we used to have a tab to declare global variables but here in 7.1 we have Functions tab...could anybody tell me how to declare the variable in 7.1?

Is there any control on the number of child records returned

Hi,
I am using web services 1.0 to return child records for an account. Is there any control over the number of child records that are returned. From what I can see it is above the default for 10 for parent record query and i would guess it returns up to 100 records?

In DSP 2.5, the 'streaming' api (which can be used only from a client in the ALDSP server instance) does not have a limit to the size of the results. The standard DSP 2.5 api causes the results to be materialized in memory - so you are limited to what memory you have available. (also, WLS server has a default limit of 10M for a request/response - can be increased in the WLS console - I think it's under 'Protocols').
The JDBC api has no limit on the result size - you might be better off using this for a reporting tool.
In DSP 3.2, there is no limit on the result size.
Mike Reiche
Oracle Data Services Integrator (formerly ALDSP)

How to find the number of transactions recorded in R/3

Hi guys,
I wanted to know the number of all the transactions recorded in R/3 in a time period.
Points for helping.
Thanks

Hi Prasun,
You can use tcode: STAT
Regards,
Ankit

How can I get the number of distinct records that each field of a DB table has?

Hi everyone,
I would like to know how to get he number of distinct records that each field of a DB table has. When tracing a SQL statement either in ST12 or ST05, in the plan execution, if the sentence made useage of an index, then I can click in the index name and see this kind of information (no. of distinct values for each field of that index).
Can I do something like this but with the whole fields of a table?
What I have found until now is in Tx ST10; I search for whatever kind of table statistics and then use the function of "Analyze table" (which takes me to Tx DB05). In here, I can enter a table and up to 5 fields in order to get the information that I want.
Is there any other way to do this?
Regards,
David Reza

Hi David,
You can export the same to excel and sort as per requirement.
Sorry is that what you are looking for ?
Regards,
Deepanshu Sharma

Is it possible to limit the number of returned Records by SQL ?

Hello all together,
i want to limit the number of records fetched by a sql-query
to a fixed maximum for example 200.
is there a way to do this like
SELECT * FROM CUSTOMERS FETCH FIRST 200
under 8.1.6 EE ?
thx for any idea
Lutz

Use ROWNUM ...
WHERE ROWNUM < 201
There are a few "gotchas" with rownum, such as "rownum >
20 and < 201" not working. Search the forum or see the
documentation for more detail.

How to change the number of records displayed on personnel profile?

Hi Experts！
1.The thing which I would like to do is as a title.
2.And There is a part it is considered that is a change part.
However, the method of changing that is not known.
I need your help also with the direction and right or wrong which the modification method of the number of display records understands.
Best Regards！

Hi jyothi.
thank you for your reply!
>Change the visible row count as 1 and check.
I changed.
but change was not shown in the display of the number of the line.
when 「rendering style 」was changed, change was shown in the display of the number of th lines.
but we need 「row repeat」 style.
regards.

How to restrict number of Data Records from Source system?

Hi,
How can I restrict the number of Data records from R3 source system that are being loaded into BI. For example I have 1000 source data records, but only wish to transfer the first 100. How can I achieve this? Is there some option in the DataSource definition or InfoPackage definition?
Pls help,
SD

Hi SD,
You can surely restrict the number of records, best and simplest way is, check which characteristics are present in selection screen of InfoPackage and check in R3, which characteristics if given a secection could fetch you the desired number of records. Use it as selection in InfoPackage.
Regards,
Pankaj

Unable to see all rejected records in SAP BPC 10

Folks,
I am trying to validate and process transformation file in BPC 10 NW.
The status shows rejected records as 1877.
Able to see 200 rejected records only.
Even when I save it as a txt file or in Excel, it displays 200 records only.
Tried with MAXREJECTCOUNT = -1 and then with 2000.
Both didn't work.
Regards,
Shrini

Hi Vadim
Mayby im missing somethin:
If i run the import process, doesnt the data get submitted to the BPCcube?
If i only want to get the list of missing masterdata for manual input in BPC (so i wont get any rejected records), is there a way to do that?
Regards
Björn

How count number of item records in a File: Idoc to File scenario

Hi All,
I am configuring an IDOC to File scenario.
Once all the IDOC data is dumped on a File, I need to calculate the number of Item records in this file and write this number at the end of the trailer record in the file.
Is theer a way to calculate the item data records(or say number of lines in the file) in the message mapping area. Or any other simple way to do it.
Appreciate your help on same.
Thanks
Shirin

hi,
Use the count function for ITEM node the assign this count value to the receiver field , keep the ITEM context to header!
Thanks,
Vijaya.

Number of available records in Oracle 10g express database

Hi,
I am facing problems in getting the number of available records in Oracle 10g express database with the following query.
string filename = dbObject.FILENAME;
string vendorID = dbObject.VENDOR_ID;
OracleCommand myCommand = _connection.CreateCommand();
myCommand.CommandText = "SELECT COUNT(*) FROM ASSET_PROCESSING_OUTPUT WHERE *FILENAME = :filename AND VENDOR_ID = :vendorID*";
myCommand.CommandType = CommandType.Text;
myCommand.Parameters.AddWithValue("filename", filename);
myCommand.Parameters.AddWithValue("vendorID", vendorID);
OracleDataReader reader = myCommand.ExecuteReader();
Using this command how can I get if the record exists in the database with the given value.
Thanks in advance.
punit

It appears you're only executing the statement. You need to fetch the result to see the value returned by the SELECT statement.

Number of Condition Records in Pur. Info Record

I am trying to get the number of condition records in a purchase info record.
using ME_GET_INFORECORD_CONDITIONS and also ME_GET_INFORECORD_CONDITIONS_1.
ME_GET_INFORECORD_CONDITIONS_1 gives me the correct values when I try to test the FM.
What is the diff between these 2 FMs.
But when I use ME_GET_INFORECORD_CONDITIONS_1 in a report, it is not giving a correct value.
Following is the code:
DATA: IT_KONP TYPE KONP OCCURS 0 WITH HEADER LINE,
      WA_KONP TYPE KONP.
DATA: coun TYPE i VALUE 0.
"Get the number of condition record - should be useful in BDC call.
CALL FUNCTION 'ME_GET_INFORECORD_CONDITIONS_1'
EXPORTING
I_EKORG       = 'U001'
I_ESOKZ       = '0'
I_INFNR       = '5300000320'
I_LIFNR       = '200524'
I_MATKL       = '001'
I_MATNR       = '80141300'
I_WERKS       = 'L001'
*     I_VABME       =
*     I_BSTME       =
TABLES
TKONP         = IT_KONP.
LOOP AT IT_KONP.
ADD 1 to coun.
ENDLOOP.
WRITE: / coun.
The variable coun is always Zero.
Reg

The LIFNR in the input parameters should be L-Padded with zeros. In SE37 it does it by itself.
reg

Number of items/records display

I want to set the number of items/records display base on query. I tried Set_Block_Property and Set_Item_Property, they don't have any option for me to set it dynamically. Any ideas?
Thanks

A couple:
a) Set QUERY ALL RECORDS to YES, and programmaticaly set MAXIMUM RECORDS FETCHED.
b) in a POST-QUERY block-level trigger, check the :system.trigger_record. When it reaches the number you want, issue an ABORT_QUERY built-in.
Hope this helps,
Pedro

Rejected record message from Essbase Studio load (3355)

I receive the following error when deploying an outline via Essbase Studio to an ASO cube (ver 11.1.2):
\\Record #36798 - Member XXX does not exist. Reference member column types require the field to be an existing member (3355)
As I read the error (BTW, can someone help me find the table of rejected record codes?), it is rejecting the assignment of an attribute to a member because the member does not exist.
What could be a reason though that I did not receive an "Error adding member XXX" rejection beforehand or something indicating that there was an error adding the member originally? I am puzzled because I cannot find anything special about the source data when comparing to the many others that loaded successfullly.

Hi All,
Towards this error if we are talking about Hyperion Essbase - Version 11.1.2.1.000 and later.
So mostly we are facing this issue has been verified as unpublished Bug 12967639.
As documented in KM:
Unable to Save ASO Outline After Renaming Members, "Error(1007072) Member [xxx] tagged as <REFER does not have a member to refer to" [ID 1465850.1]
Also towards ASO there is another document having all there as:
Oracle Hyperion Essbase and Aggregate Storage (ASO) [ID 1291202.1]
Thanks,
Shaker

Resize the number of rejected record in sqlldr

Similar Messages

Maybe you are looking for