Resolutions not detected...

I have two Samsung HD (1920 x 1080) monitors connected to my MacBook Pro running 10.7.5 via a Zotac HDMI dual adapter to the computers Mini display port.
My computer had been detecting these monitors as a single 3840 x 1080 resolution monitor (ie. the combined resolution of two HD screens) ever since I first connected them, but now suddenly it won't detect this resolution and will only see them as the same 1920 x 1080 input, so they are basically operating as mirrored displays of each other. this obviously makes one of them superfluous and I would like to be able to detect them as before, as a 3840 x 1080 resolution spanning the two monitors.
Any ideas how I can restore this? Thanks...

bjackman wrote:I don't know what 773 means, but it looks like an octal permissions setting. That seems improbable though. I'd be very interested if anyone knew.
Every resolution in the vbios has a number. Maybe it's an index or something. But basically, that's it. See the list in the first post, the numbers in []? Add 512 to those and there you have it.
For standard resolutions (320x200-1280x1024), the numbers are the same in every vbios. For non-standard ones that may or may not be there, the numbers differ. An example: In my specific vbios, 865 means 1280x800-32. Bananabrain's vbios doesn't even have 1280x800.

Similar Messages

[SOLVED] IPS Monitor Resolution Not Detected

I just got one of the new Catleap 27" IPS monitors. It works fine in Windows at its native 2560x1440 but arch doesn't seem to be detecting it properly
Screen 0: minimum 8 x 8, current 2720 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
800x600 60.3*+
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DVI-I-3 connected 1920x1080+800+0 (normal left inverted right x axis y axis) 531mm x 298mm
1920x1080 60.0*+ 60.0
1440x900 59.9
1280x1024 60.0
1280x800 59.8
1152x864 75.0
1024x768 70.1 60.0
800x600 60.3 56.2
640x480 59.9
DP-1 disconnected (normal left inverted right x axis y axis)
DVI-I-3 is my second monitor (a regular LCD) which works fine. I think DVI-I-2 is the Catleap. Oddly, the manual says it supports 800x600 but it won't even turn on when X is started. Also it works fine when X isn't started. Whenever I switch to a different TTY my second monitor turns off and the Catleap turns on (albeit at a low resolution).
I've tried adding a new resolution mode with xrandr, but that gives me an error
# xrandr --newmode "2560x1440_60.00" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync
# xrandr --addmode DVI-I-2 2560x1440_60.00
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 153 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 37
Current serial number in output stream: 38
I've tried various xorg.conf settings and using nvidia-settings, but nothing I do can get it to use a higher resolution or even turn on for that matter. I'm not sure if my dual monitor setup could be screwing with it. I've tried disconnecting my second monitor but that doesn't seem to help.
I found this article, which says that the Catleap's EDID isn't in Linux by default so you can specify it manually. So I set up my xorg.conf.d directory as follows
# 90-serverlayout.conf
Section "ServerLayout"
Identifier "Main"
Screen 0 "Acer V243"
Screen 1 "Catleap Q270" LeftOf "Acer V243"
Option "Xinerama" "1"
EndSection
# 30-screen-acerv243.conf
Section "Monitor"
Identifier "Acer V243H"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Acer V243"
Device "GTX 570 DVI 2"
Monitor "Acer V243H"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
# 30-screen-qhd270.conf
Section "Monitor"
Identifier "QHD270"
VendorName "ACB"
ModelName "QHD270"
VertRefresh 60
Mode "2560x1440"
DotClock 241.500000
HTimings 2560 2608 2640 2720
VTimings 1440 1443 1448 1481
Flags "-HSync" "+VSync"
EndMode
EndSection
Section "Screen"
Identifier "Catleap Q270"
Device "GTX 570 DVI 1"
Monitor "QHD270"
DefaultDepth 24
Option "UseEdid" "FALSE"
SubSection "Display"
Depth 24
Modes "2560x1440"
ViewPort 0 0
Virtual 2560 1440
EndSubSection
EndSection
# 20-nvidia.conf
Section "Device"
Identifier "GTX 570 DVI 1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 570"
Screen 1
Option "UseDisplayDevice" "DFP-0"
Option "DynamicTwinView" "FALSE"
EndSection
Section "Device"
Identifier "GTX 570 DVI 2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 570"
Screen 0
Option "UseDisplayDevice" "DFP-3"
Option "DynamicTwinView" "FALSE"
EndSection
Which doesn't work. The Catleap still won't turn on and the mouse position is all screwed up on my Acer. If I comment out the screen 1 line in the ServerLayout, the Acer works fine on its own.
Last edited by silverhammermba (2012-11-14 02:00:51)

Switching to the open source driver fixed my problem.

Viewsonic VG2030wm not detected on DVI

Hello,
I got a MacBook Pro 13' and purchased at the same time a Mini DisplayPort to DVI Adapter to use with my ViewSonic VG2030wm. To my surprise, when I connected the monitor absolutely nothing happened, it goes completely undetected. The monitor works perfectly fine with a PC using an Nvidia 8600 through the DVI connector. I tried with both a single and dual link cable. I seem to be not the only one with this problem since I've found a few posts around but with no answers.
Later I exchanged the DVI adapter for a VGA one and the monitor worked fine but I would like to be able to use the DVI quality. I've asked twice at the Apple store and nobody has heard of such a problem. The monitor specs say it has a DVI-D (with HDCP) port.
Any ideas?
Thanks!
Hector

I had/have the same problem with a MacMini (with an Intel GMA 950), VG2030wm monitor and DVI cable. It worked fine with a VGA cable (but I had to use SwitchResX to pick the native 1680x1050 resolution).
I partially solved the problem (in Mac OS X 10.6) by unplugging both the MacMini and VG2030wm from the wall for 1-2 minutes (to reset the VG2030wm's settings?), and then resetting the MacMini's PRAM (by pressing and holding Command + Option + P + R while booting).
Unfortunately, I still have problems (black screen or native resolution not detected) when I restart o wake up the MacMini. The workaround I have found is to turn off the monitor (with the button on the front panel), wait a few seconds, and then turn it on again (and repeat) until the Mac Mini's picks up the monitor at 1680x1050 resolution.
I think there should be a way to force (instead of detecting) the EDID display information of the VG2030wm in Mac OS X by editing the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist, but I don't know how to do it (or if it's possible at all).
Hope it helps a little.
Regards,

MacBook Pro not detecting display resolution properly on Leopard 10.5.2

I have a 15" 2.2ghz MacBook Pro that I recently upgraded to Leopard. When I am home, I connect the MBP to a USB keyboard and mouse, and a Samsung 226BW 22" display using a DVI cable. Prior to the Leopard upgrade, I could connect the components, close the MBP, hit the spacebar on the USB KB and the MBP would wake up using the Samsung in its native resolution of 1680x1050.
Since the upgrade there are two major problems. I can no longer wake the MBP up with the KB. It sounds like it is waking up, the Apple logo illuminates for a moment, then it immediately goes back to sleep. Secondly, the MBP is not detecting the correct resolution of the monitor. It shows both as being 1440x900 no matter what. Under the system profiler, it has exactly the same description for both the MBP display as well as the Samsung 22". I have already read other posts and performed the following:
Reset the SMC
Reset the VRAM
Trashed the windowserver.plist and rebooted
Any ideas on why this may be happening? Thanks in advance.

You are not alone. Spent over an hour with AppleCare support. The engineer was fantastic, but when he got out of his area of expertise and tried to take me to level 2 support, the level 2 folks said 'contact samsung' That's obviously a delay tatic. This is very clearly a 10.5.2 upgrade issue. My external 24 inch samsung display was working fine prior to the upgrade and now it's stuck on 1440X900. They took me through PRAM resets, cache clearing, plist removal etc.
Very disappointed to see Apple take a very microsoft like stance to a problem that is obviously a bug in the graphics drivers for 10.5.2. The engineer also indicated that this was a known issue, but the docs on it are 'eyes only'. I question that culture as well.

Cinema Display not detected

I got my 20" Cinema Display back from repair today (backlight problem) and now I can't get my MacBook Pro to detect that it's attached. While it was at the repair center, I used a CRT as a second monitor. So today, I just closed the MBP (didn't shut it off, which I think is what cause the problem), disconnected the CRT, connected the ACD and opened the MPB back up. Completely black screen, with the little LED on all the time.
So, troubleshooting:
- The MBP still detects the CRT
- ACD is detected by both a G4 and G5
- A different 20" ACD is ALSO not detected by my MBP
- Reset NVRAM and SMC
- Booted MBP in safe mode
- Booted MBP from startup CD
- Tried various resolutions while the CRT was connected, thinking maybe it was stuck on one that's not compatible with the ACD
- Moved and recreated the com.apple.windowserver.* files
I'm running 10.4.9 and here's what the graphics/displays info says, WITH the Cinema Display connected:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-086
EFI Driver Version: 01.00.086
Displays:
Color LCD:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Built-In: Yes
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
Been messing with this for four hours, and I still have a blank display. Any other ideas? From one thread someone mentioned replacing the logic board fixed a similar problem.
MacBook Pro Mac OS X (10.4.9)

UPDATE:
I just got back from my visit to a mac genius. Of course Murphy's law was in full effect! With my MBP connected to the cinema display in the Mac store, everything worked as it is supposed to.
Well, I rush home thinking that maybe mine would now work - - no luck! He did suggest that I try connecting analog with the provided dvi-to-vga adapter. This suggestion DID work! BUT, I want my video digital! That is why even though I was happy with the iBook G4 that I bought last year, I wanted digital video + expanded desktop!
I think I will make another reservation with the Mac Genius, but this time, bring my monitor. Will keep you posted...

MSI x48c platinum - does not detect SATA HDDs

I am having some problems with a pc build with motherboard not detecting SATA HDDs (MIS x48c Platinum).
I believe I have exhausted all other avenues, and I would appreciate some help if I have missed something obvious.
(details of other components are listed at end of mail).
When I built pc using these components, and went into BIOS settings, the SATA HDD's were not detected. I tried changing BIOS settings, but no difference if SATA, AHCI, or IDE settings.
I removed the HDDs and successfully tested them in another machine (also formatted them while had them istalled in other pc).
IDE optial drives are detected. I have tried to boot with these disconnected to ensure no isues with both IDE and SATA drives connected, but this did not resolve issues.
I have also tried connecting HDD to different onboard SATA ports, and connecting just one drive with no success.
Resetting BIOS defaults, and using clear CMOS reset did not resolve issues either.
Sometimes on boot, it takes a few attempts to boot correctly, and on these occassions I receive an error message "Warning !!! The previous performance of overclocking is failed, and the system is restored to the default settings, Press any key except "DEL" to enter setup ......." I haven't tried to set any over clocking.
I read about a number of issues on MSI forum related to SATA drives which were resolved by BIOS upgrade (mobo was shipped with v.7.0 released 20 March 08). I managed to install an old IDE HDD and flash BIOS, but still no resolution of issues detecting SATA drives (BIOS V.7.2 released 29 July 08).
I've tried everything I can think of at this stage. Is there anything else I should try, or is there something wrong with this motherboard?
Spec:
Motherboard:
343949 MSI X48C Platinum, X48, Socket-775,
DDR2/DDR3, ATX, GbLAN, 2xPCI-Ex(2.0)x1
Other components in build:
CPU Intel Core 2 Quad Q9550
Graphics Sapphire Radeon HD 4870 512MB
HDD 2 x Samsung SpinPoint T166 500GB
RAM 4GB (2x2GB) GeIL DDR3 1333MHz Value Dual Channel (7-7-7-24) PC3-10660
PSU 700W X-Power ATX SLI PSU
ODD DVD & CDR drives from an old pc - IDE connections.

i just remember i had once similar problem with a sata driver. the issue is this you can not adjust everything in bios in one go and expect mobo to know about it. what i mean is this for instance you disable the raid then you save it and exit and then when it reboot you go back to bios and reset another another parameter, you save and exit and on reboot you go back to bios and reset another parameter. i got round the prob that way and it worked and mobo saw the sata HDD. give this a shoot good luck and finally make sure raid is disabled
this is what i would do
1- make sure the jumper setting on your IDE Hdd is correct (Y may have to try this twice as there are two different setting on jumper setting for Master)
2- connect the sata HDD
3-click on power
4-go to bios and disable raid save exit
5-on reboot go back to bios
6--on first option click on it then you should see all devices that can be seen by mobo if you do not see sata HDD you have to click on enable for the auto to see the device once it sees the device save and exit. REMEMBER THE JUMPER SETTING ON IDE HDD CAN CAUSE PROB . SO try the other jumper setting for master, repeat this procedure once more hopefully you get it right

Internal display not detected. "Detect displays" option now gone...

Hello!
My MacBook Pro will not detect any displays. After going to sleep a couple of nights ago, and bringing the computer out of sleep, the display would not turn on; even though I could hear the computer wake up and the fans turn on.
I hard-reset the computer and the display still would not turn on after the power down. Was able to connect to my computer through my wife's MacBook through "Share Screen", and everything is working except the display. I immediately backed up my data realizing the system was working fine (not a hard drive issue, hooray!) other than the display. I tried connecting my computer to an external display and did a restart with the lid closed and the computer would not detect the external either.
Through share screen, I then went into the Display Properties and to my surprise noticed that the "Detect Displays" button has disappeared! Furthermore, when I go into
"About This Mac > More Info... > Graphics / Displays"
Nothing is listed for the screen! On my wife's MacBook it lists the LCD's resolution and other information, but not on mine. Also, under "Display Connector", hers says "Status: No Display Connected"; where as mine says nothing at all, its blank underneath the words "Display Connector".
I reset the P-RAM and that did not help either. If I could I would do a fresh install of OSX, but I can not see the screen so I can do that either.
Is there any way I can reset the computer by any other means?
I also don't have an issue with taking this computer apart, as apple care is expired, and I've done my fair share of take aparts before.
Once again, the computer is starting up and working, but the screen is not being detected or turning on. Everything else works. I called apple and they wanted me to pay $50 for an over the phone troubleshoot, or to take it in to the apple store (an hour away from here) and possibly pay $300 for it to be fixed. AHHHH!
Thanks.

OK, I am confused...can you see an image on an external display or not?
The torch/flashlight trick will tell you if the backlight is out and you are still getting an image and it is a display problem. Although dead backlights are less of a problem with the LED backlit displays.
In your last post you say "If I could at least detect an external...", this leads me to believe that you are not able to detect an external display. With this assumption, it looks like the video card, which if memory serves me correctly is on the MLB and would require replacing the MLB.
If you are able to get an image on an external display, then we are back to the display as the problem.

Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party

Setup could not detect any Sound Blaster Audigy 2 on your Sys

Here's the deal. I have used my Soundblaster Audigy 2 Platinum without incedent for a long time with the following box:
Asus A7V333
XP 800
.5 GB DDR 2700
I changed cases, but all of the components remained the same. Everything else went like clockwork, but no Audigy.
So I did a clean and replace of the drivers, however, I had no Audigy CD. I ordered the CD from Creative, but it looks to be a CD for the Audigy 2 XS...will this work for the Audigy 2 Platinum?
So when I go to run the CD, I get the following error:
Setup could not detect any Sound Blaster Audigy on your system.
Please ensure that your Sound Blaster Hardware is properly installed before running this Setup program
Setup will now exit.
I didn't change slots and the IRQ is still the same.
I can provide any additional documentation, i.e. screen shots of device manager, et al. to anyone interested in helping.
Also, if you li've in Chicago, I will get you drunk.
I am so irritated with this thing... I remember it being a pain in the @$$ to install the first time, but not like this.
Cheers,
-rob

Okay I ended up fixing this problem myself seeing as a lot of these forum topics just come to a dead end with no real resolution.
Let's get 'Creative' ...
I removed the reg entry hkey_local_machine/software/creative tech, removed all drivers, programs, and anything that even smelt faintly of creative.
Just to make sure I ran the CTZAPXX.exe on the cd and removed drivers again there also.
Then upon a swift reboot I used CTZAPXX.exe to install the drivers, ran the cd, unchecking the option at the bottom of the 'custom' install list to install windows drivers (as it had already been done)
Now I'm back in business
Though, all through the ages I've never had a creative soundcard, which hasn't given me trouble at some stage, man I even have shameful memories of my AWE64... Lift your game creative, you've got a great product line, just a pity the shoddy drivers sometimes let them down.
This post may be a little outdated, but it's really intended for all you googlers out there I really hope this fixes your problem!

Change of modes not detected

I have a yoga 2 13.My laptop does not detect any change of modes i.e it does not activate tent/theatre/tablet.Is there any solution for it or is it a manufacture defect since i was facing the problem from the beginning.Please suggest.

Try pressing the rotation lock buttons.
Also, install my yoga patch. If it detects slate/laptop mode, it is a software problem, not a hardware problem.
indest wrote:
RC8: http://alltechtalk.net/Yoga_Patch.exe
Just an FYI, this is a RC, not the final product.
As always, use at your own risk.
Please report any/all bugs
Change log:
RC8.1 Fixed the notification bug, when the screen was resized; ALT + L hotkey activates the Lock.
RC8: Fixed Lock Password bug, Fixed Lock Siren Bug, Auto max audio upon Lock start, Blocked Muting/Volume down on trigger) when Lock is activated; Added BT Toggle Hotkey Alt+B (thank miru)
RC7: Added "Yoga Lock" to the program (via tray menu).*****
RC6: Removed Battery info to eliminate redundancy with windows app; Refined System Up-time code; Added Estimate Usage Cost (Eco-Friendly initiative)
RC5: Added Power Plan changer to the trey menu; Added Battery Info, Bug Fixes
RC4: Update detector/downloader; Fixed "Disable Touchscreen on Boot" bug, cleaned up the Settings app; added quick resolution buttons to the tray menu.
RC3: Added a Disable Touchscreen on Boot option; Fixed spelling errors.
RC2: Hopefully fixed the Slate Mode Notification Bug; Auto-Disable Touchscreen, if Touchscreen was disabled before slate mode
RC1: Notification bug fix; changed the path of the trigger file to AppData; made an installer
V. 0.5.1 Added DPI support
V. 0.5: Added a "Close" button disabler (the button next to the volume up button.... this addition prevents accidental program closer); Modified the settings apps; Improved Notification Bar; Removed Tooltips (replaced with Notification Bar)
V. 0.4: Added Notification handler for Slate Mode/Laptop Mode; Modified the settings apps; Added tray menu; Removed the Alt + X close hotkey, since try menu was added; Fixed minor bugs
V. 0.3: Added Power Plan Toggle on Power State change; Added a Settings App; Added switches to the Patch
V. 0.2: Added Trackpad Fix****
V. 0.1: Touchscreen Toggle
****The trackpad fix only works with generic synaptic drivers. To install the latest driver (17.0.19), please do the following:
1. Disable signature enforcement: https://www.youtube.com/watch?v=NM1MN8QZhnk
2. Install the synaptic driver: 17.0.19
3. Install the aforementioned patch
Yoga Lock Description:
Ever wanted to go to the bathroom at Starbuck or in the Library? Afraid to leave your laptop behind? If so, this Lock was made for you.
Disclaimer: I shall not be held liable for any stolen property!!! As always use at your own risk and please use your brain!
Once activated the lock has the following potential:
Covers your entire screen.
Blocks perpetrators from accessing your desktop.
Prevents USB drives from being stolen, via Siren Deterrent.
Helps deter thieves from taking your laptop.
What can trigger the Lock:
The slightest mouse movement.
Removal of a USB drive.
Attempted power down of the computer (future goal is to suspend all attempts of powering down).
Change in AC status (i.e. unplugging the computer).
When triggered, the lock has the following potential:
Take a picture of the person who triggered the lock and email the picture to you (passwords are encrypted).
Loud siren is played.
Activation of any script you write. This essentially opens this feature to endless possibilities. Currently, I utilize this feature to report my computer as stolen to the prey-project's control panel (this script is not fully functional and will not be packaged with this application).

TS1363 iTunes does not detect my iPhone, sends error message, please help

iTunes does not detect my iPhone when I plug into ligthening cable- error message 0xE8000084 appears, please help

Hello Brian,
Here is an article that should point you in the direction of a resolution. It has a section about the OXE errors.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
All the best,
Sterling

MOVED: Nvidia graphics card was not detected in your system

This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=178616.0

^^Gecko, I'm not bustin' on you, but you're wrong. Or, you are, but I doubt it, one of the lucky ones.
I've gotten 3.1 installed by running the setup .exe file from the DVD via Windows Explorer. Everything seems OK except the graphics/resolution. My NVIDIA card isn't recognized and my resolution options only go up to 1280 x 800.
The Window 7 Performance Information and Tools shows this:
"Graphics
Total available graphics memory Not detected
Dedicated graphics memory 0 MB
Dedicated system memory 0 MB
Shared system memory 0 MB
Display adapter driver version 6.1.7600.16385
Primary monitor resolution 1280x800
DirectX version DirectX 8 or earlier"
Apple, please, help us!
Message was edited by: K Dubb
Message was edited by: K Dubb

Airdrop not detecting iphone 6 after updating Yosemite yesterday. Everything is on in mac and iPhone but not able to detecting each other. continuity works fine though.

Does anyone has same problem? i tried everything and also turn of firewall but no luck. Trying to transfer photo from iPhone 6 to mac using airdrop but can not detect device. both wifi and bluetooth are on as well.

Not sure if this will help but I had a similar issue with iTunes not locating my iPhone 5 IOS 8.0.2. The resolution for me (so it seems right now) was to 'forget' my network on both phone and macbook pro. I rejoined the networks, rebooted each and so far so good.
peter

Iphone is not detecting wifi

i have tried restoring many times but still when i switch on wifi it works fine for sometime and immediatly it starts to connect and disconnect and later i see the wheel spinning continously near wifi toggle and doesnt not detect any network and sometimes when i do hard reset wifi toggle greys out so if there is any fix please help !!!!!!!!!!

I also have the same issue. 4S. No respite since the time I upgarded to 6.1.1 and even after 6.1.2 no change in wifi status. Support article http://support.apple.com/kb/TS1559 does not help at all. Hoping and waiting for a resolution by apple. This has to be a software glitch in th ios.
Anand

Fingerprint sensor not detected

Good Day: I am unable to use my finger print sensor as I have lost all my data and had to purchase a new Windows 8 OS. Can you please assist? I attempted to use the validity Fingerprint manager and was prompted with the message "Fingerprint sensor not detected...." N.B (Computer has an I3 Processor)

Hello ikasif,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the fingerprint sensor on your notebook computer is not working as it should, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Resolutions not detected...

Similar Messages

Maybe you are looking for