Resources / locations

anyone an idea hot to access resources and locations
so we could see and overview?
the only thing i found is a sqlite file..
sayonara
zeke

well, with the ical server utility you cant really view anything, you can see what is there and you can add.
no i mean like a normal calender view were i can see when my meeting room is used and when not. i know i can do that with check avaibility but sometimes it's just nice to see an overview. so i can see who is useing my meeting room when.
thx

Similar Messages

Proxy Error ( The ISA Server denied the specified Uniform Resource Locator

Dear All,
   I am getting one error in ABAP proxy configuration,
following is the error.
~response_line     HTTP/1.1 502 Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL). )
~server_protocol     HTTP/1.1
~status_code     502
~status_reason     Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL). )
via     1.1 BLRSPRX10001
connection     close
proxy-connection     close
pragma     no-cache
cache-control     no-cache
content-type     text/html
content-length     4070
    suddenly one day this error occured. proxy configuration was working earlier fine. SLDCHECK also working without any problem now also. but in SPROXY it is saying no connection to ESR. only local objects.
Please help me.
Regards
Pradeep P N

Hi Pradeep,
What is this BLRSPRX10001?
IF it is rfc destination, then check the user.
This problem is related to user rights. The user used there might not have sufficient authorizations to invoke the proxy. (may be the authorization is expired)
Regards
Suraj

Exchange 2010 OWA : TMG Error 12302 The server denied the specified Uniform Resource Locator (URL).

Hello All,
We are using TMG2010 (SP2, rollup4) for publishing Exchange 2010 OWA sites. The issue is that after every 10-24 hrs , the TMG server stops logging in OWA sites and start giving below error. Then we have to restart the server one two times or the problem
solves by itself.
I have also install a new server and it is also giving same behavior. On TMG server the exchange edge server and Forefront Protection for exchange is also installed.
Please help to solve this issue.
Denied Connection
-TMG05 5/21/2014 11:44:39 PM
Log type:
Web Proxy (Reverse)
Status: 12302 The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
Rule:
PRC-OWA
Source:
119.157.175.238:56971
Destination:
111.68.105.121:443
Request:
GET http://mail.parc.gov.pk/owa
Filter information:
Req ID: 0e947d98; Compression: client=Yes, server=No, compress rate=0% decompress rate=0% ; FBA cookie: exists=yes, valid=yes, updated=no, logged off=no, client type=public, user activity=yes
Protocol:
https
User:
anonymous
Additional information
Client agent: Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.2; WOW64; Trident/6.0)
Object source: (No source information is available.)
Cache info: 0x0
Processing time: 125 MIME type:

Hi,
A similar thread:
http://social.technet.microsoft.com/Forums/forefront/en-US/e8fdc1bd-f023-4804-ad02-67899d8c7347/the-server-denied-the-specified-uniform-resource-locator-errors12302-ashttp-error-code-of-500?forum=Forefrontedgegeneral
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error : Severity and Description Path Resource Location Creation Time Id

i have this error :
Severity and Description Path Resource Location Creation Time Id
invalid character or markup found in script block. Try surrounding your code with a CDATA block. essai/src essai.mxml Unknown 1236103965593 182
my source is attach code
Many thanks for your help ,
Lionceau,

look my source :
<![CDATA[
import mx.controls.Alert;
import com.adobe.rtc.events.SessionEvent; //utilisé
pour les trois blocs
import com.adobe.rtc.messaging.UserRoles; //utilisé
pour les trois blocs
import com.adobe.rtc.collaboration.AudioPublisher; //
AudioPublisher me sert pour la gestion du microphone
import com.adobe.rtc.collaboration.AudioSubscriber; // me
sert pour choisr l' aboné écouté
//import com.adobe.rtc.collaboration; // me sert pour la
gestion du microphone
//import com.adobe.rtc.clientManagers;// me sert pour la
gestion du microphone
import com.adobe.rtc.events.StreamEvent;// pour le son
(audio xml)
import mx.events.ItemClickEvent; //pour le son ( audio xml)
import mx.controls.Label;
import mx.core.UIComponent; // me sert pour la gestion du
microphone
import flash.events.EventDispatcher;// me sert pour la
gestion du microphone
// import com.adobe.rtc.components:ResizableCanvas; amettre?
//debut bloc share
import
com.adobe.rtc.sharedManagers.descriptors.FileDescriptor;
import mx.utils.UIDUtil;
import mx.collections.ArrayCollection;
import com.adobe.rtc.collaboration.FileSubscriber;
import com.adobe.rtc.sharedManagers.UserManager;
import com.adobe.rtc.messaging.NodeConfiguration;
import com.adobe.rtc.events.CollectionNodeEvent;
import com.adobe.rtc.collaboration.FilePublisher;
import com.adobe.rtc.sharedManagers.FileManager;
[Bindable]
private var applicationTitle:String = "File Publisher
Example";
// list of managers
private var _fileManager:FileManager;
private var _filePublisher:FilePublisher;
private var _fileSubscriber:FileSubscriber;
private var _userManager:UserManager;
// our datagrid dataprovider will use this collection
[Bindable]
private var _fileDescriptors:ArrayCollection = new
ArrayCollection();
// file sharing group id, it is similiar to that of folder
concept
private var _groupid:String = "_filePublisherExample";
//fin bloc share
//debut bloc camera
import com.adobe.rtc.events.UserEvent;
import com.adobe.rtc.events.SharedPropertyEvent;
import com.adobe.rtc.events.ConnectSessionEvent;
import mx.controls.Button;
import com.adobe.coreUI.controls.CameraUserBar;
import mx.core.UITextField;
import com.adobe.rtc.events.SharedPropertyEvent;
import com.adobe.rtc.sharedModel.SharedProperty;
import com.adobe.rtc.collaboration.WebcamSubscriber;
import mx.containers.VBox;
import com.adobe.rtc.events.UserEvent;
import com.adobe.rtc.sharedManagers.StreamManager ;
import
com.adobe.rtc.sharedManagers.descriptors.StreamDescriptor ;
private var currentSubscriber:WebcamSubscriber ;
private var sharedProperty:SharedProperty ;
* This example shows how the camera component can be used
with a publisher and a
* number of subscribers. The publisher has a big view while
subscribers have a small view.
* A shared property is used to pass the stream to the
publisher's user interface.
* Every user is provided with play and pause handlers.
private function onCreationComplete():void
sessionManager.roomManager.autoPromote = true ;
sessionManager.roomManager.guestsHaveToKnock = false ;
sharedProperty = new SharedProperty();
sharedProperty.isSessionDependent = true ;
sharedProperty.sharedID = "webcamShare2" ;
sharedProperty.connectSession = sessionManager ;
sharedProperty.subscribe();
sharedProperty.addEventListener(SharedPropertyEvent.CHANGE,onChange);
sessionManager.userManager.addEventListener(UserEvent.USER_REMOVE,onUserRemove)
* @private
protected function onUserRemove(p_event:UserEvent):void
if ( sharedProperty.value &&
p_event.userDescriptor.userID == sharedProperty.value[0]) {
sharedProperty.value = [] ;
* When the main big stream changes, all users can view it
via the sharedProperty.
private function onChange(p_evt:SharedPropertyEvent):void
if ( currentSubscriber != null ) {
clickedContainer.removeChild(currentSubscriber);
currentSubscriber.close();
currentSubscriber = null ;
if ( sharedProperty.value == null ||
sharedProperty.value.length == 0 ) {
return ;
currentSubscriber = new WebcamSubscriber();
currentSubscriber.connectSession = sessionManager ;
currentSubscriber.subscribe();
currentSubscriber.webcamPublisher = webCamPub ;
currentSubscriber.publisherIDs = sharedProperty.value ;
currentSubscriber.addEventListener(UserEvent.USER_BOOTED,onCleared);
currentSubscriber.addEventListener(UserEvent.STREAM_CHANGE,onCameraPause);
clickedContainer.addChild(currentSubscriber);
invalidateDisplayList();
* If the big image is stopped, clear it.
private function onCleared(p_evt:UserEvent):void
if ( sessionManager.userManager.myUserRole ==
UserRoles.OWNER ) {
sharedProperty.value = [] ;
* Clicking on the small image below makes it large.
private function onClick(p_evt:MouseEvent):void
if ( (p_evt.currentTarget is WebcamSubscriber) &&
!(p_evt.target.parent is CameraUserBar)) {
sharedProperty.value = (p_evt.currentTarget as
WebcamSubscriber).publisherIDs;
* Handler for a user pausing the camera.
protected function onCameraPause(p_evt:UserEvent):void
var userStreams:Array =
sessionManager.streamManager.getStreamsForPublisher(p_evt.userDescriptor.userID,StreamMan ager.CAMERA_STREAM);
if (userStreams.length == 0) {
trace("onCameraPause: no userStreams");
return;
for (var i:int = 0; i< userStreams.length ; i++ ) {
if (userStreams
.type == StreamManager.CAMERA_STREAM ) {
break;
var streamDescriptor:StreamDescriptor = userStreams;
if ( streamDescriptor.streamPublisherID ==
sessionManager.userManager.myUserID ) {
sessionManager.streamManager.pauseStream(StreamManager.CAMERA_STREAM,!streamDescriptor.pa use,streamDescriptor.streamPublisherID);
* Handler for a user stopping the camera.
private function onBooted(p_evt:UserEvent):void
if ( (p_evt.currentTarget is WebcamSubscriber) &&
(p_evt.userDescriptor.userID == sessionManager.userManager.myUserID
|| sessionManager.userManager.myUserRole == UserRoles.OWNER)) {
webCamPub.stop();
if ( (p_evt.currentTarget.parent as VBox).getChildAt(1) is
Button ){
((p_evt.currentTarget.parent as VBox).getChildAt(1) as
Button).label = "Start" ;
if ( sharedProperty.value && (sharedProperty.value
as Array)[0] == p_evt.userDescriptor.userID ) {
sharedProperty.value = [] ;
]]>
</mx:Script>

Cannot read resource located in repository

Hello,
I'm trying to read a resource located in the repository. I have a directory NAMED dir1 located under the root. Within that directory(dir1) I created a file NAMED file1. Within file1 I have a key/value TEMP-DIR=c:/lctemp.
Within a process I use the RepositoryService ReadResourceContent operations:
the input is <> /dir1/file1
the output is <> doc1 (a document variable). I'm getting null on the return.
Thank you for any insight.
Jesse
P.S.
Looking at the server log during startup, I did see this fragment which may or may not have a bearing: ("I'M using JBoss Turnkey on Windows XP)
(it has an ERROR--unable to find config file and it has a WARN
WARN [org.jboss.deployment.DeploymentInfo] Only the root deployment can set the loader repository, ignoring config=LoaderRepositoryConfig(repositoryName: com.adobe.edc.startupservice:loader=edc-startup.sar, repositoryClassName: org.jboss.mx.loading.HeirarchicalLoaderRepository3, configParserClassName: null, repositoryConfig: null)
2008-09-15 14:45:53,289 INFO [STDOUT] [INFO ]Booting [com.celequest.system.boot.generic.RestartManager]...
2008-09-15 14:45:57,255 ERROR [org.apache.axis.configuration.EngineConfigurationFactoryServlet] Unable to find config file. Creating new servlet engine config file: /WEB-INF/server-config.wsdd
2008-09-15 14:45:57,636 INFO [org.jboss.deployment.EARDeployer] Started J2EE application: file:/C:/Adobe/LiveCycle8/jboss/server/all/deploy/CAS_Adobe.ear
2008-09-15 14:47:55,473 INFO [org.jboss.deployment.EARDeployer] Init J2EE application: file:/C:/Adobe/LiveCycle8/jboss/server/all/deploy/adobe-livecycle-jboss.ear
2008-09-15 14:49:29,005 WARN [org.jboss.deployment.DeploymentInfo] Only the root deployment can set the loader repository, ignoring config=LoaderRepositoryConfig(repositoryName: com.adobe.edc.startupservice:loader=edc-startup.sar, repositoryClassName: org.jboss.mx.loading.HeirarchicalLoaderRepository3, configParserClassName: null, repositoryConfig: null)
2008-09-15 14:49:30,948 WARN [org.jboss.deployment.MainDeployer] Found non-jar deployer for adobe-dscf.jar: MBeanProxyExt[jboss

Hello Jasmin,
I'm using an older release of LiveCycle--dont have record/playback.
I created a process-getTempdir and a .net client. The client is supposed to return the document at the repository location
(/dir1/file1).
The process call the ReadResource of RepositoryService passing in
/dir1/file1.
The process returns the results (a document) to the client:
Like:
try{
Document doc = svc.invoke();
catch(Exception e) {
Console.WriteLine(e};
A null pointer exception is being caught.
Jesse

Resource/Locations in web calendar

Hi,
I have a problem with my resources/locations not showing up in the web calendars. I've managed to add them in Directory utility and delegated them to my group, but nothing is showing up in the web calendar and when I check the iCal properties in server admin there are no resources or locations listed, although the users and groups are.
Is there something obvious I'm doing wrong? It should be possible to schedule resources & locations through the web calendar, right?
Cheers,
Erik

That depends on the server that you are using. For example in tomcat you would establish the datasource connection parameters in the context xml file for the web app.
http://tomcat.apache.org/tomcat-5.0-doc/jndi-datasource-examples-howto.html
You'll need to consult the documentation for your server.

Resource location change

Hi Experts,
I need to change the location of a resource for the planing version '000' through program. Any BAPI or FM? Some one please help me in this.
Thanks in advance.

Hi Mytri,
Try the below BAPI
Object type: BUS10004
Function Module: BAPI_RSSRVAPS_CHANGEMULTI
Please confirm
Regards
R. Senthil Mareeswaran.

Resource & Location Setup

I have been having a frustrating time trying to get iCal set up for Location and Resource assignment to events and can find virtually no documentation. Does anyone know of any?
I have set up locations and resources in Directory using our Leopard server and then delegated them to myself as administrator. When I go into iCal and use preferences to show those calendars I get the strange menu on the left that shows DELEGATES and the name of the resource and then a submenu "calendar". I can create events for each resource calendar, but cannot assign the resource for events from other calendars (that's the whole point, isn't it?). Plus the window that pops up to show availability has extra lines that say "resourceA (organizer)" and "resourceA".
All-in-all a very counter-intuitive process. Has anyone had success setting this up?

+Sorry about the cross-post from http://discussions.apple.com/message.jspa?messageID=7096676#7096676 ; this should be the correct place to respond.+
I'm having trouble isolating the exact error(s) related to this, but here are some seemingly relevant lines from the logs. 'brainstimulationadministration' is the group that should have access to the location and that owns the calendar I'm adding the event to. 'magstimlab5100b' is the location I'm trying to assign for the event.
2008-04-24 16:29:08-0400 [-] caldav-8009 AMP,client PROPFIND /calendars/locations/magstimlab5100b/ HTTP/1.1
2008-04-24 16:29:08-0400 [-] caldav-8010 AMP,client PROPFIND /calendars/groups/brainstimulationadministration/inbox/ HTTP/1.1
2008-04-24 16:29:08-0400 [-] caldav-8009 AMP,client PROPFIND /calendars/locations/magstimlab5100b/calendar/ HTTP/1.1
2008-04-24 16:29:08-0400 [-] caldav-8009 AMP,client PROPFIND /calendars/locations/magstimlab5100b/inbox/ HTTP/1.1
2008-04-24 16:31:24-0400 [-] caldav-8009 AMP,client PUT /calendars/groups/brainstimulationadministration/calendar/C5CDDCF3-4519-4A3F-96 D3-8C3A1748D58A.ics HTTP/1.1
2008-04-24 16:31:24-0400 [-] caldav-8009 [-] Writing to file /Library/CalendarServer/Documents/calendars/groups/brainstimulationadministrati on/calendar/C5CDDCF3-4519-4A3F-96D3-8C3A1748D58A.ics
Greg

Where Do You Associate MRLs (Media Resource Locations)?

I have just installed vlc, a DVD and media player, after reading glowing reviews of it in Linux Format magazine. It can make use of MRL based filenames, such as
dvd://filename
However, on my Arch 0.7.1, this doesn't seem to work. I am guessing that there is a configuration file somewhere that associates MRLs with the devices that they represent. Can anyone point me at where this configuration is done? Thanks!

Play wrote:
...which may cause me to just redo my entire site... (Maybe this time without iWeb, to be safe.)
Matt ~ See one alternative to iWeb in this post:
What cheap hosting sites are compatible with Mac?

VPN connects but unable to access resources on remote network

HI,
I'm able to ping the ASA interface once the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network.
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http outside
http outside
http inside
http outside
http inside
http outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
no dns-guard
no protocol-enforcement
no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
set connection random-sequence-number disable
set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: end

You need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App

Hibernate Mapping Exception Error reading resource: Help Please

I've downloaded Hibernate this weekend and have been working at getting this up and running in my spare time. I've run into a problem and can't seem to find the solution. I'm hoping some one here can help me out.
I'm running MyEclipse
MySQL
and Hibernate 2 in a struts application
I've only got one form and table that I'm trying to map right now, but I get the above error when I run this line of code.
Configuration cfg = new Configuration().addClass(AddCustomerForm.class);
Does anyone have any ideas. Here are the important sections from the two configuration files

<hibernate-configuration>
    <session-factory>
        
        <property name="connection.username">PaintTracker</property>
        <property name="connection.url">jdbc:mysql://127.0.0.1:3306/PaintTracker</property>
        <property name="dialect">net.sf.hibernate.dialect.MySQLDialect</property>
        <property name="connection.password">PaintTracker</property>
        <property name="connection.driver_class">com.mysql.jdbc.Driver</property>
        <property name="show_sql">true</property>
        <mapping resource="com/PaintTracker/struts/form/AddCustomerForm.hbm.xml"/>
    </session-factory>

<hibernate-mapping>
     <class name="com.PaintTracker.struts.form.AddCustomerForm" table="customer">
          <id name="customerID" column="CustomerID" type="java.lang.Long" unsaved-value="0">
               <generator class="identity"/>
          </id>
          <property name="firstName" column="FirstName" type="java.lang.String"/>
          <property name="lastName" column="LastName" type="java.lang.String"/>
          <property name="streetAddress" column="StreetAddress" type="java.lang.String"/>
          <property name="middleInitial" column="MiddleInitial" type="java.lang.String"/>
          <property name="city" column="City" type="java.lang.String"/>
          <property name="state" column="State" type="java.lang.String"/>
          <property name="zipCode" column="ZipCode" type="java.lang.String"/>
          <property name="phoneNumber" column="PhoneNumber" type="java.lang.Long"/>
          <property name="emailAddressLeft" column="EmailAddressLeft" type="java.lang.String"/>
          <property name="emailAddressRight" column="EmailAddressRight" type="java.lang.String"/>
          <property name="company" column="Company" type="java.lang.String"/>
     </class>
</hibernate-mapping>

ok finally gotten back to this and rewrote a bunch of the code. I'm getting almost the same error, but not quite.
I'm still getting org.hibernate.MappingException: Error reading resource: but it is pointing to the first mapping resource located inside the hibernate.cfg.xml.. so I know it is finding and making it inside the hibernate.cfg.xml.
this is the code that the exception occurs in.
the actual line is the configuration.configure(); in the else statement.
public HibernateUtil(URL url2) {
          Configuration configuration = new Configuration();
          log.info("configuration_static is null");
          log.debug("configuring configuration_static from " + url2);
          try {
               if (url2 != null)
                    configuration.configure(url2);
               else
                    configuration.configure();
               this.sessionFactory = configuration.buildSessionFactory();
               log.info("Configuration complete");
          } catch (HibernateException e) {
               log.error(e);
               System.out.println(e);
               configuration = null;
               log.info("Configuration failed. Setting config to null!");
     }The resource I am trying to read is located correctly (eclipse lets you navigate to and choose the xml file to use.. it then builds the hibernate.cfg.xml file for you.)
here is a copy of the resource that is giving me a problem... whichever resource I have listed first is the one the exception is thrown for... so I'm hoping I just have something mixed up in the way I'm writing my xml files.
<hibernate-mapping package="com.WorkoutTracker.db.model">
     <class name="com.WorkoutTracker.db.model.User" table="user">
          <id name="userID" column="userId" type="java.lang.Long" unsaved-value="0">
               <generator class="increment"/>
          </id>
          <property name="userFName" column="userFName" type="java.lang.String"/>
          <property name="userLName" column="userLName" type="java.lang.String"/>
     </class>
</hibernate-mapping>

Res Id and Location not showing up in MSP_EpmResource_UserView

Hi
If I use below Query it shows me Res Id and Resource Location fields.
SELECT *FROM dbo.MSP_EpmResource_UserView
but When I add above fields to below Query, it gives me an error saying Invalid coloumn.
SELECT MSP_EpmResource_UserView.ResourceName as [ResourceName], MSP_EpmResource_UserView.ResourceStandardRate
as [ResourceStandardRate], MSP_EpmResource_UserView.ResourceOvertimeRate as [ResourceOvertimeRate], MSP_EpmResource_UserView.ResourceStatusUID as
[ResourceStatusUID], MSP_EpmResource_UserView.ResourceCode as [ResourceCode], MSP_EpmResource_UserView.ResourceCostPerUse as [ResourceCostPerUse],
MSP_EpmResource_UserView.ResourceEmailAddress as [ResourceEmailAddress], MSP_EpmResource_UserView.ResourceInitials as [ResourceInitials],
MSP_EpmResource_UserView.ResourceMaterialLabel as [ResourceMaterialLabel], MSP_EpmResource_UserView.ResourceType as [ResourceType],
MSP_EpmResource_UserView.ResourceGroup as [ResourceGroup], MSP_EpmResource_UserView.ResourceMaxUnits as [ResourceMaxUnits], MSP_EpmResource_UserView.ResourceBookingType
as [ResourceBookingType], MSP_EpmResource_UserView.ResourceTimesheetManagerUID as [ResourceTimesheetManagerUID], MSP_EpmResource_UserView.ResourceEarliestAvailableFrom
as [ResourceEarliestAvailableFrom], MSP_EpmResource_UserView.ResourceLatestAvailableTo as [ResourceLatestAvailableTo], MSP_EpmResource_UserView.ResourceCanLevel
as [ResourceCanLevel], MSP_EpmResource_UserView.ResourceHyperlink as [ResourceHyperlink], MSP_EpmResource_UserView.ResourceHyperlinkHref as [ResourceHyperlinkHref],
MSP_EpmResource_UserView.ResourceNTAccount as [ResourceNTAccount], MSP_EpmResource_UserView.ResourceIsActive as [ResourceIsActive],
MSP_EpmResource_UserView.ResourceIsGeneric as [ResourceIsGeneric], MSP_EpmResource_UserView.ResourceIsTeam as [ResourceIsTeam],
MSP_EpmResource_UserView.ResourceBaseCalendar as [ResourceBaseCalendar], MSP_EpmResource_UserView.ResourceWorkgroup as [ResourceWorkgroup],
MSP_EpmResource_UserView.ResourceClientUniqueId as [ResourceClientUniqueId], MSP_EpmResource_UserView.ResourceCostCenter as [ResourceCostCenter],
MSP_EpmResource_UserView.ResourceCreatedRevisionCounter as [ResourceCreatedRevisionCounter], MSP_EpmResource_UserView.ResourceModifiedRevisionCounter as [ResourceModifiedRevisionCounter],
MSP_EpmResource_UserView.ResourceCreatedDate as [ResourceCreatedDate], MSP_EpmResource_UserView.ResourceModifiedDate as [ResourceModifiedDate],
MSP_EpmResource_UserView.ResourceCount as [ResourceCount], MSP_EpmResource_UserView.[RBS] as [RBS],
MSP_EpmResource_UserView.[Cost Type] as [Cost Type] FROM dbo.MSP_EpmResource_UserView ORDER BY
dbo.MSP_EpmResource_UserView.ResourceName

What happens if you right click on the SQL view in SQL Management Studio and click "Select top 1000 rows", are these columns included and does that work? Can you screen shot the SQL columns as they are in the view and send the updated query that
fails?
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Support for JSP's located in WEB-INF directory

Several application servers support the use of placing JSP pages underneath the WEB-INF directory, to insure that only server side workflow forwards requests to those pages and not direct URL access. IN addition the JSTL specification supports the use of
<c:import url="/WEBINF/published/campaign_Arts.jsp" />
Does OC4J 9.0.3 support this syntax? I cannot get it to work. Is there an application configuration file I need to update to support this?
Thanks

          thank you for your reply...
          but...
          My problem is that i want to serve jsp pages that include various other jsp pages.
          But i don't want those other pages to be served directly. The approach of putting
          the jsp files in the WEB-INF, or in a sub directory of it, worked fine on Tomcat.
          The way i look at it is that the server has direct access to them when putting
          togetter the main jsp, but they can't be accessed from the outside. But this seems
          not to be the case.
          Any ideas?
          "ilya Devers" <[email protected]> wrote:
          >The WEB-INF is not perceived as a directory to the engine. Resources
          >in it
          >are not exposed and should not. It can hold sensitive resources such
          >as
          >application deployment descriptors that can contain database log in
          >information to name something. The engine should never serve resources
          >located here.
          >
          >This directory should only contain the normal directories: lib and classes,
          >and the web.xml files (and weblogic.xml).
          >
          >Hope this helps.
          >
          >ilya
          >

Cannot select last delegated resource in Firefox in webcal

Note: I've already solved this issue, but figured other people might benefit as well.
Scope
This problem deals exclusively with WebCal, a service of Apple Lion Server. It is a component of iCal, a service of the Lion Server. When iCal is enabled, it creates a website application in Apache under the location: /webcal.
Problem
This problem appears to only exist in Firefox (only tested on version 7.0.1), users cannot select the last resource/location principal in the drop down at the top of the webcal (/webcal). Chrome and Safari did not exhibit this issue. In Firefox, the last element appended to the select tag is automatically selected, thus, the javascript code selecting the correct entry, which appears before the last append, is rendered useless.
No only that, but the last entry is never selectable, as the DOM already indicates that that element is selected and thus the "change" event never triggers.
This does NOT refer to calendar selection once you're in a resource. This is about resource selection. This is at the top of the web page, centered and always prefaced with "Calendar for " followed by the delegated principal Full Name
Solution
Update the javascript to select the current calendar after the last element is appended to the select element, but before the change event is listened to. The javascript file affected/udpated is located at:
/usr/share/collabd/coreclient/public/javascripts/calendar/calaccess.js
on your Lion Server. Changes start around line 1285.
Here's my updated file
starting at line 1279:
if ($('calendar_title')) {
        $('calendar_title').down('span').appendChild(Builder.node('span', {className:'popuphandle'}, "\u25BC"));
        $('calendar_title').down('span').appendChild(Builder.node('select', [
                Builder.node('option', {value:'__'}, '_Calendar.Title.MyCalendar'.loc())
        inAccountsToDelegate.each(function(account) {
                var optionElm = Builder.node('option', {value:account.principalURL}, account.displayname);
                if (account.principalURL == principalService().mUserPrincipalURL) {
                        optionElm.selected = true;
                $('calendar_title').down('select').appendChild(optionElm);
        $('calendar_title').down('select').selectedIndex = 0;
        selectElm = $('calendar_title').down('select');
        $(selectElm).childElements().each(function(optionElm) {
                if( optionElm.value == principalService().mUserPrincipalURL ) {
                        optionElm.selected = true;
        $('calendar_title').down('select').observe('change', function(inEvent) {
                if ($F(inEvent.findElement('select')) == '__') {
                        window.location.search = '';
                else {
                        window.location.search = 'principal='+encodeURIComponent($F(inEvent.findElement('select')));
        }.bindAsEventListener(this));
Replace the if statement up to, but not including the comment:
// select the first calendar
It's the vanilla (as it came with the server) javascript install file with modifications to get Firefox to work with it. Tested in Chrome 15, Firefox 7.0.1, Safari 5.1.2 (OSX 10.7). No warrantees or guarantees are made about this file. Use at your own risk.

Glad it worked for you. It took me about a day to figure out.
I've not had issues with delegates. But I've had to use the command-line instead of the GUI as I've needed multiple people as delegates for certain resources (like public calendars with single writers).
We've had issues with time zones reverting to Pacific, though.

Query Statement Properties Criteria -- Server "Location"

When I generally create queries to populate collections [Membership Rules] in SCCM 2012, I use:
System Resource.System OU Name is like "[OU location]%"
However, I recently received a request to create a query collection based on an
attribute location, instead of OU container. I am having trouble composing the criteria for this new query. Does anyone know how to create a query based on attribute location? For example,
the server site is "[xxxx]CS" and the attribute location name is
"A"

Thank you so much for your response and blog!
I never knew of the AD attribute discovery feature. I was confused since my servers were showing up in Assets and Compliance > Devices because I did an adsysdis for the proper domain and OU.
I made created my query using System Resource.location is like "%A%"
(after adding location as an AD attribute) all of my collections finally populated. Thanks again!!

Resources / locations

Similar Messages

Maybe you are looking for