Responses not received from forms
Hi there, I have a form which I created in acrobat and which I have been sending out to participants. The form has a submit button which sends responses to acrobat.com however when people press submit the reader says that "your response was submitted successfully" but I receive no responses in my tracker and no data is sent to me! I am losing valued feedback for a product and I have no way of retrieving all that information!?! Can anyone help? Help much appreciated! I can't disclose the full URL of the form due to confidentiality so I have changed a few letters but the URL looks like this (with the first five letters changed after the = sign ):
https://acrobat.com/app.html#d=abcdeRXDLGGXW3w4RDrYng
I have posted elsewhere but don't seem to get any responses - this may be because only I have the problem? Could it be that upgrading my adobe acrobat to version 9 caused the problem? Please help!!
Thanks
You're not the only one. I was working with someone a while back who had the same problem. They couldn't get a straight answer either. An alternative is to collect the form data or forms yourself, either on a web server or email. Have you tried asking in the Acrobat.com forum here?
Similar Messages
-
Itunes could not connect to the ipad because an invalid response was received from the device
Hello
I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
"Itunes could not connect to the ipad because an invalid response was received from the device"
I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
Thank you for your help!
System specs:
asus rampage v extreme motherboard
OCZ vertex 4 SSD
8 Gb DDR3 RAM (1600 mHz)
windows7 x64
Intel i7 3.5Ghz 1155
nvidia GTX295 (x2 running in Sli)I fixed this problem. Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
My iPad 2 would no longer sync with my old PowerPC Mac mini running MacOS. My iPhone 3GS synced fine. IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes. I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
iPad 2 used to sync prior to iOS 7 installation.
Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could. )
all good now. -
How i fix the problem on windows 7 itunes could not connect to the iphone because an invalid response was received from the device
take a look at https://discussions.apple.com/message/24243668#24243668. i had this problem and that solved it for me.
-
I have an Ipod Touch 4G, Although I have tried two connection leads to the computer, it comes up with the message ' Itunes could not connect to "Dads Ipod" because an invalid response was received from the device'. I can access the contents of the device via the connection leads using 'My Computer' but not through Itunes as the message always appears!! Using WinVista Homebasic. Is this a known fault with the Ipod4 and VISTA? It works okay on a laptop, however, I would like an expert to take me through the steps to sort out my home desktop computer? Please help? Thanks in advance
ITry this previous discussion:
https://discussions.apple.com/message/11240674#11240674 -
Hi, I am having problems with itunes and my ipad........
I can use my ipad on my laptop but it will not connect to my main PC, I get the error message:
"itunes could not connect to the ipad because an invalid response was received from the device"
I have done all the Apple support ideas including re-installing itunes twice but no joy.
It used to work a week or so ago and no, I can't think of anything I have done which would have stopped it.
I have run msconfig and disabled everything but still no connection.
Anyone got any ideas?????iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115 -
Aironet 1600 - A response was not received from the router or access point
Hi,
I'm trying to set up a wireless network with multiple SSID's. The new network only has CISCO products (router, switches). For the moment I'm trying to connect to 1 SSID (Windekind.Gast). the SSID is visible but when connecting devices have te folowing error message in the log:
Connection status summary
Connection started at: 2015-02-17 09:55:49-951
Profile match: Success
Pre-Association: Success
Association: Fail
Security and Authentication: Not started
Root cause:
Wireless association to "Windekind.Gast" failed
A response was not received from the router or access point.
Detailed root cause:
Wireless association to this network failed. Windows did not receive any response from the wireless router or accesspoint.
The signal is perfect (I'm only a few feet away from the AP).
To make sure there is no dhcp problem I tested the swich port in access mode for vlan 30 which supplied an IP correctly. I'm really not seeing the problem and searched the web for days now! Any help would be very much appreciated!
Below the config of the access point (done via de web interface).
! Last configuration change at 05:30:28 UTC Mon Mar 1 1993
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname AP002-C
logging rate-limit console 9
enable secret 5 $1$Bxv3$Of8o5..8v6gzIiAe2tXlh/
no aaa new-model
no ip cef
dot11 syslog
dot11 vlan-name Windekind.Directie vlan 50
dot11 vlan-name Windekind.Gast vlan 30
dot11 vlan-name Windekind.Klasnet vlan 40
dot11 ssid Windekind.Directie
vlan 50
band-select
authentication open
mobility network-id 50
dot11 ssid Windekind.Gast
vlan 30
band-select
authentication open
authentication key-management wpa version 2
mbssid guest-mode
mobility network-id 30
wpa-psk ascii 7 14201B05080121222A2C6A6D63
dot11 ssid Windekind.Klasnet
vlan 40
band-select
mobility network-id 40
crypto pki token default removal timeout 0
username Cisco password 7 112A1016141D
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 2
stbc
beamform ofdm
mbssid
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel 2452
no preamble-short
station-role root
payload-encapsulation dot1h
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 4
no dfs band block
stbc
beamform ofdm
mbssid
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel dfs
station-role root
payload-encapsulation dot1h
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio1.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio1.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 spanning-disabled
no bridge-group 30 source-learning
interface GigabitEthernet0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 spanning-disabled
no bridge-group 40 source-learning
interface GigabitEthernet0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 spanning-disabled
no bridge-group 50 source-learning
interface BVI1
ip address 10.0.0.81 255.255.255.0
no ip route-cache
ip default-gateway 10.0.0.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
logging facility user
bridge 1 route ip
line con 0
line vty 0 4
login local
transport input all
endHi Rasika
thanks for the reply! 10.0.0.81 belongs to vlan 1. I changed the config as suggested but no luck.. (same problems are logged in the event viewer). the ap is connected to a switchport in trunk mode and vlan 1 is the native lan (untagged). the port also is joined to vlan 30 (and others).
Below the new config. Hope you can see an error..
! Last configuration change at 22:56:10 UTC Thu Apr 1 1993
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname AP002-C
logging rate-limit console 9
enable secret 5 $1$Bxv3$Of8o5..8v6gzIiAe2tXlh/
no aaa new-model
no ip cef
dot11 syslog
dot11 vlan-name Default vlan 1
dot11 vlan-name Windekind.Directie vlan 50
dot11 vlan-name Windekind.Gast vlan 30
dot11 vlan-name Windekind.Klasnet vlan 40
dot11 ssid Windekind.Directie
vlan 50
band-select
authentication open
mobility network-id 50
dot11 ssid Windekind.Gast
vlan 30
band-select
authentication open
authentication key-management wpa version 2
mbssid guest-mode
mobility network-id 30
wpa-psk ascii 7 14201B05080121222A2C6A6D63
dot11 ssid Windekind.Klasnet
vlan 40
band-select
mobility network-id 40
crypto pki token default removal timeout 0
username Cisco password 7 112A1016141D
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 2
stbc
beamform ofdm
mbssid
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
no preamble-short
channel 2452
station-role root
payload-encapsulation dot1h
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 4
no dfs band block
stbc
beamform ofdm
mbssid
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel dfs
station-role root
payload-encapsulation dot1h
interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio1.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio1.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 spanning-disabled
no bridge-group 30 source-learning
interface GigabitEthernet0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 spanning-disabled
no bridge-group 40 source-learning
interface GigabitEthernet0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 spanning-disabled
no bridge-group 50 source-learning
interface BVI1
ip address 10.0.0.81 255.255.255.0
no ip route-cache
ip default-gateway 10.0.0.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
logging facility user
bridge 1 route ip
line con 0
line vty 0 4
login local
transport input all
end
t -
SMS Server not receiving from SMSC
Using the gateway configuration file that comes with
Colfusion 8, I re-configured the file to read as it is now
(attached). Unfortunately when test is sent to my phone number, it
is not received for processing in Coldfusion. I downloaded nowSMS
and set it up as well. The NowSMS server is receiving alright. So I
am wondering what is up with the Coldfusion SMS Server and Secondly
how would I be able to make Coldfusion work with the nowSMS server?
# SMSGateway configuration file
# Test server config
# This is the IP address of SMSC
ip-address=190.4.64.43
# Port to bind to
port=7710
# Your system id
system-id=test
# Your password
password=testSMS
# The source address for this client
source-ton=1
source-npi=1
# This is a made-up address
source-address=00447700081736
# The address range this smpp client will serve
# Generally the same as your source address
addr-ton=1
addr-npi=1
address-range=00447700081736
# Message sending rate; how many messages per second is the
# gateway allowed to send to your service provider.
# This can be a decimal (i.e. 0.1). 0 is unlimited.
# The default is 100 messages per second.
message-rate=100.0
# The mode of the gateway; Either synchronous or asynchronous
# In synchronous mode the gateway will wait for the response
# from the server when sending a message and the
SendGatewayMessage()
# CFML function will return the SMS messageID of the message
# or an empty string if their is an error. In asynchronous
mode,
# the gateway will not wait for a response and the SMS
messageID
# will NOT be returned from SendGatewayMessage().
# The default is synchronous.
mode=synchronous
# Should the gateway retry delivery on Network Errors?
# If a network error occurs while trying to deliver a
message,
# should the message be queued for delivery when the gateway
# is able to re-bind to the SMSC. This is useful if the
gateway
# is in asynchronous mode, where no error status is returned
from
# the CFML SendGatewayMessage() function.
# The default is no.
network-retry=no
# Should the gateway retry delievery on Transient Errors?
# If an error is returned from the SMSC that indicates
# the message may be able to be delivered in the future,
# should the gateway attemp to resend send the message?
# This is useful if the gateway is in asynchronous mode,
# where no error status is returned from the CFML
# SendGatewayMessage() function.
# The default is no.
transient-retry=no
# Everything below here is usually OK.
# The function in the Gateway CFC which the is called
# when an incoming message arrives.
cfc-method=onIncomingMessage
# The default destination address info
destination-ton=1
destination-npi=1
# You can't have a default destination
# destination-address=
# The service type can be empty or one of
# the following values:
# CMT, CPT, VMN, VMA, WAP or USSD
# service-type=
# From the spec:
# Identifies the type of system requesting the bind.
# This may enable SMSC responses which are
# particular to a given type of ESME.
system-type=SMPP
# The receive timeout is a timeout for trying to receive a
message
# from the SMSC. If you want go to infinite wait until a PDU
# is received, set the receive-timeout to -1.
# The value is in seconds. The default is 30 seconds.
receive-timeout=10
# The ping interval is how often the SMS Gateway will send an
# EnquireLink PDU to the server to verify the health of the
connection.
# The value is in seconds. The default is 60 seconds.
ping-interval=60
# The number of connection attempts the gateway will make
until it gives up.
# Use -1 to retry until connected. The default is -1 (try
forever).
retries=-1
# Connection retry interval; how long to wait between
connection attemps.
# The value is in seconds. The default is 10 seconds.
retry-interval=10Why don't you just use Coldfusion's built-in gateway,
together with the SMS client simulator. The simulator is at
{CF_HOME}/bin/SMSClient.bat -
Item not received from boardwalk buy
I purchased an item on 6/21/15 from boardwalk buy. Had not received the item after three weeks, I contacted them and they replied on back order. I still have not received the item as of today 8/7/15. Have emailed them and have had no response. I received a certification no. from buy/safe. Is there anyway for me to get my money back. Am I protected by pay pal.
File a dispute for non receipt of item via "resolve a problem in the resolution centre" link lower left of your paypal summary page. Give them a few days to get the item to you OR refund you and if not escalate the dispute to a claim for paypal to review. DO NOT close the dispute until you have a CLEARED refund or the item. ********************************** I give up my time to help you so a thank you or kudos would be cool.
Marking one of my replies as a solution would be appreciated if I sorted your problem.
-
SAP HCM P&F - Update an infotype field which is NOT passed from Form
Dear Experts,
I have a requirement to update the Infotype with the entries in the HCM form (input by Employee in ESS) upon Manager's approval in MSS.
We are achieving this functionality using HCM P&F (FPM) with an Workflow associated. In this Workflow Standard Task (TS17900108) is used to Save the form data into the Database.
But there is one field (APPROVED_DATE) in the Infotype whose value is not from the FORM but should be updated in the Infotype.
Please help me with your inputs.
Regards,
ShankarDear Christopher,
I am extremely thankful to you for all the replies. But, unfortunately, we are messed up with this requirement and we couldn't achieve it.
In this regard, could you please give us the step-by-step procedure to achieve this functionality?
Requirement in brief again:
We have designed Overtime HCM form (FPM) using which employee requests for the Overtime. This form is sent for the Manager for approval. We have achieved this functionality. With the Manager Approval, the database is also updated perfectly.
Then we have added one more field in the infotype to track the Approved Date. This field is to be updated along with the other fields (sent from FORM) upon the approval of the manager.
And now though the other fields are updated correctly into the infotype, the approved date is not updated.
Thanks a ton in advance for your guidance as this is very critical and urgent requirement for us.
Regards,
Shankar. -
Report not working from forms.
Hi
we are beginners and please help us.we have installed in LAN database 11g on vista
and application server 10g on os 2003.
we are developing some applications from our developer pc in vista and using developer suite 10g.
we want to generate some reports and call them from forms.
This is the code in when button pressed.
DECLARE
repid REPORT_OBJECT;
repjobid VARCHAR2(200);
repstatus VARCHAR2(200);
repjobno number;
repserver VARCHAR2(100) := 'rep_mbxserver_FRHome1';
BEGIN
repserver := 'rep_mbxserver_FRHome1';
/* Check to see if forms application is WEB deployed */
IF get_application_property(user_interface) = 'WEB' THEN
message('web');
repid:= FIND_REPORT_OBJECT('REP');
message('report found');
/* Set Report parameters given WEB deployment */
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'e:\users\pro\reports\emp.rdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,repserver);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
/* DESFORMAT could be HTML, HTMLCSS or PDF here */
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'HTML');
/* Run the report */
repjobid := RUN_REPORT_OBJECT(repid);
message('run report');
/* Check the report status */
repstatus:=REPORT_OBJECT_STATUS(repjobid);
WHILE repstatus in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
repstatus := report_object_status(repjobid);
message('rep status');
END LOOP;
IF repstatus='FINISHED' THEN
message('REPORT WAS CORRECTLY RUN');
/* Display the report output in the client browser */
repjobno := length(repserver) + 1;
WEB.SHOW_DOCUMENT ('http://printer1.mbxnet.com:8889/reports/rwservlet/showjobs?server='||repserver,'_blank');
copy_report_object_output(repjobid,'\\ansu\mtb-erp\emp.lis');-- (Trying to copy to local folder)
message('File copied to local pc');
/* If report has failed display message to user */
ELSE
message('REPORT FAILED WITH STATUS: '||repstatus);
END IF;
message('222222222222');
ELSE
/* Else if forms application is Client-Server deployed */
/* Set Report parameters given Client-Server deployment */
message('client server');
repid:= FIND_REPORT_OBJECT('rep1');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'e:\users\pro\reports\emp.rdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'\\printer1\mtb-erp\emp.lis');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt.prt');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,repserver);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=NO');
/* Report to be executed via Reports Background Engine, not the 'new' Reports Multi-Tier Server */
/* Destype SCREEN or PREVIEW can be used here */
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,SCREEN);
/* Run the report */
repjobid := RUN_REPORT_OBJECT(repid);
copy_report_object_output(repjobid,'\\printer1\mtb-erp\emp.lis');
message('File ok');
-- host('c:\mtb-erp\ansu.lis');
END IF;
END;
we are struck and unable to proceed.Actually when we run the report from report builder it works.we are calling the report from application server.
Also if we replace the above web.show document with this statement it works but even though it gives FRM-41214 error.
web.show_document('http://ansuya.mtbnet.local:8889/reports/rwservlet?destype=cache&desformat=html&report=\\mbxserver\developers\emp.jsp&userid=scott/tiger@mbxsql¶mform=no');
One more doubt , is it possible if we don not want to show the report in a browser in case of client server locally in lan
but just generate the report from forms and save it in local folder like we do in previous old versions.If so please guide us.
Thanks in advance.Hello ansu,
Did you solve this problem ?
Regards,
Felipe. -
Reports are not called from form in browser plz help
Hi,
I have installed 9iAS+8.1.7 database on the same machine with NT4 server.My system's forms(.fmx) are running well but my reports are not running from my main form.i call reports from the
from as,
Run_Product(reports,'..\iReports\xglrxx12.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);
Actually want to know the report's setting when calling from the from in a browser(environment variables,virtual paths etc.).
My database is installed in drive E:\8idb_home\ and 9iAS is on
G:\9iAS_home\.My systems .fmx & .rep files are in "iforms" and "ireports" folder respectively.
Plz help!
Many thanks!Hi,
First of all thanks to Vincent Botteman for solving the prob.
Yes when i changed my call of run_product by excluding the path i have specified when calling from form it then makes a result.
Also specified the entry of your reports .rep files by giving path in reports60_path registery variable as,
Run regedit-->Hkey_Local_Machine-->Software-->Oracle here give the full path of your .rep files as an first entry in reports60_path variable.And finally not mention the path when calling reports from form as,
Run_Product(reports,'xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Correct way.
Run_Product(reports,'..\iReports\xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Wrong way.
Regards! -
hi all,
I am sending a request from XI to bapi and it is going but the response is not coming from the BAPI.Below is the structure of the response bapi which is required
<i><?xml version="1.0" encoding="UTF-8" ?><ns0:ZLS_BAPI_SAMPLE_DUE_DATE_CHK.Response xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<EQUIPMENTID>
<item>
<EQUIPID/>
</item>
</EQUIPMENTID>
<LOCATIONID>
<item>
<LOCID/>
</item>
</LOCATIONID>
<OILID>
<item>
<OILID/>
</item>
</OILID>
<OUTPUT>
<item>
<ZSAMPLEID>22</ZSAMPLEID>
<ZSAMPLEDUEDATE>20061205</ZSAMPLEDUEDATE>
<VCODE>55</VCODE>
<KURZTEXT>ww</KURZTEXT>
<ZEQUIPDES>dddd</ZEQUIPDES>
<MAKTX>33</MAKTX>
<ZPLANID>3</ZPLANID>
<ZPLANIDESC>hhh</ZPLANIDESC>
</item>
</OUTPUT>
<RETURN>
<item>
<TYPE/>
<CODE/>
<MESSAGE/>
<LOG_NO/>
<LOG_MSG_NO/>
<MESSAGE_V1/>
<MESSAGE_V2/>
<MESSAGE_V3/>
<MESSAGE_V4/>
</item>
</RETURN>
</ns0:ZLS_BAPI_SAMPLE_DUE_DATE_CHK.Response></i>
Equip id,loc id and oil id are mapped in the request mapping and in response we need the output fields.But during runtime we get the below as the payload structure
<i><?xml version="1.0" encoding="UTF-8" ?>
- <rfc:ZLS_BAPI_SAMPLE_DUE_DATE_CHK.Response xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <EQUIPMENTID>
- <item>
<EQUIPID />
</item>
</EQUIPMENTID>
- <LOCATIONID>
- <item>
<LOCID>1</LOCID>
</item>
- <item>
<LOCID>2</LOCID>
</item>
- <item>
<LOCID>3</LOCID>
</item>
- <item>
<LOCID>4</LOCID>
</item>
- <item>
<LOCID>5</LOCID>
</item>
- <item>
<LOCID>6</LOCID>
</item>
- <item>
<LOCID>7</LOCID>
</item>
- <item>
<LOCID>8</LOCID>
</item>
- <item>
<LOCID>9</LOCID>
</item>
- <item>
<LOCID>10</LOCID>
</item>
</LOCATIONID>
- <OILID>
- <item>
<OILID>BP260</OILID>
</item>
</OILID>
<OUTPUT />
- <RETURN>
- <item>
<TYPE />
<CODE />
<MESSAGE />
<LOG_NO />
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1>Invalid Customer Number</MESSAGE_V1>
<MESSAGE_V2 />
<MESSAGE_V3 />
<MESSAGE_V4 />
</item>
</RETURN>
</rfc:ZLS_BAPI_SAMPLE_DUE_DATE_CHK.Response></i>
Can anyone plz help me out
thanks and regards,
Nisheetahi shweta,
I was not giving a 10digit number as KUNNR so the error was coming but now the output is still not coming.the payload is showing as
<i><?xml version="1.0" encoding="UTF-8" ?>
- <rfc:ZLS_BAPI_SAMPLE_DUE_DATE_CHK.Response xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <EQUIPMENTID>
- <item>
<EQUIPID />
</item>
</EQUIPMENTID>
- <LOCATIONID>
- <item>
<LOCID>1</LOCID>
</item>
- <item>
<LOCID>2</LOCID>
</item>
- <item>
<LOCID>3</LOCID>
</item>
- <item>
<LOCID>4</LOCID>
</item>
- <item>
<LOCID>5</LOCID>
</item>
- <item>
<LOCID>6</LOCID>
</item>
- <item>
<LOCID>7</LOCID>
</item>
- <item>
<LOCID>8</LOCID>
</item>
- <item>
<LOCID>9</LOCID>
</item>
- <item>
<LOCID>10</LOCID>
</item>
</LOCATIONID>
- <OILID>
- <item>
<OILID>BP260</OILID>
</item>
</OILID>
<OUTPUT />
<RETURN />
</rfc:ZLS_BAPI_SAMPLE_DUE_DATE_CHK.Response></i>
am i doin anythin wrong with the mapping?? -
I recently tried to obtain an Aperture serial number and through the process found out that I am not receiving emails from Apple. With an Apple tech support's help, was able to get her basic email but one with any links in the body of the message, would not come through. Strip the links and it comes in fine. Other emails from normal senders come in fine, with links, attachments, etc.
Any ideas on a solution?
Thanks.You are not addressing Apple here. We are all just users like yourself. It's not a good idea to post your private email on a public forum.
-
10g Report not running from Forms if called thru paramform on other domain
Hi...
I'm using Dev10g Rel.2....If I call a report with paramform=no and pass it a value from forms then report runs well. but if I call report thru parameter form and pass value from parameter form the report doesn't run with error:
The webpage cannot be displayed.
Interesting fact is that If I call the report from a client on same domain as that of Application Server then it runs even thru paramform. I've also entered the application server I.P and name on other domain's client but no way. Can u guess whats the problem there???It sounds like a Firewall permissions issue to me. You might want to have your Firewall admin watch the firewall as you run your form to see if the packets are getting intercepted and blocked.
Hope this helps,
Craig
If a response is helpful or correct, please mark it accordingly. -
Report(3.0) not executing from Forms 6.0.
Hello
I am trying to run a report (developed in Report designer 3.0) from a form (developed in Form Builder 6.0) as follows :
-- message ('Before Report...');
-- run_product (REPORTS, 'proj', SYNCHRONOUS, RUNTIME, FILESYSTEM, listid ) ;
-- message ('After Report...');
DECLARE
repid report_object ;
rep VARCHAR2(100);
BEGIN
message ('Before Report...');
repid := find_report_object('PROJ');
rep := RUN_REPORT_OBJECT(repid);
message ('After Report...');
END;
I have tried both of these methods (Run_Product and Run_Report_Object) but nothing works. What is the difference between Run_Product and Run_Report_Object for report processing point-of-view ? It is displaying both messages but giving no error. The Properties of PROJ node in 'REPORTS' class are as follows :
Name : PROJ
File-Name : <full-path>/proj.rdf
Execution Mode : RunTime
Communication Mode : Synchronous
Data Source Block : Null
Query Block : Null
Report Destination Type : Screen
Destination Name : Null
I am not able to see the results even by executing in form builder.
Any help will be appreciated.
ManishHi Shay
Thanks for your reply. I have compiled the report (repname.rdf) in Report Builder 6.0 and trying to execute it from a form, developed in Form Builder 6.0, as follows :
PROCEDURE run_report IS
list_id ParamList;
run_date date;
repid report_object ;
repout varchar2(100) ;
BEGIN
run_date := sysdate;
list_id := Create_Parameter_List('input_params');
Add_Parameter(list_id, 'DESTYPE', TEXT_PARAMETER, 'FILE');
Add_Parameter(list_id, 'DESNAME', TEXT_PARAMETER, '/home/mgupta/orep.ps');
-- Run_Product(REPORTS, 'Full-Path/repname.rdf', synchronous, runtime, filesystem, list_id);
repid := find_report_object('repname');
repout := run_report_object(repid);
Destroy_Parameter_List(list_id);
END;
I have tried both methods (Run_Product and Run_Report_Object) but nothing works. What is the difference between Run_Product and Run_Report_Object for report processing point-of-view? Note that I have given full path for Run_Product while report-name is given for Run_Report_Object. The full path is also given in the property palette report. It is displaying both messages but giving no error. The Properties of REPNAME node of 'REPORTS' class in Object Navigator of specified form are as follows :
Name : REPNAME
File-Name : <full-path>/repname.rdf
Execution Mode : RunTime
Communication Mode : Synchronous
Data Source Block : Null
Query Block : Null
Report Destination Type : Screen
Destination Name : Null
This report is running fine if I execute it in Report Builder but not running thru form.
Any help will be appreciated.
Manish
Maybe you are looking for
-
Alert dialog shows in the wrong place
Hello, I've an extension (based on <csxs:CSXSWindowedApplication>) that opens a Window component called Info: public function myDoAbout():void{ var window:Window = new Info(); if(window){ window.type = CSXSWindowType.MODAL_DIALOG;
-
InDesign Crashing on folio article update
I am trying to update an article in an already existing folio and InDesign continually crashes at the 'Writing PNG' stage. I have tried updating to the latest version, restarting, undocking the folio builder, renaming the file and relinking it. Not
-
Viewing "This PC" Devices and Drives when connected through a Terminal Services connection
Greetings, [long-time listener, first time caller] I am a service technician who remotely logs into customer servers using terminal services. I am accessing systems around the globe. I regularly need to move files from my local system to the custo
-
Where is my serial # for Photoshop Elements 11?
I have just purchased Photoshop 11, and need the serial # to register. There are so many numbers on the packaging and none of them are marked (serial number) as per the info on Adobe. How many numbers or letters are in the serial number and how do I
-
Photoshop CC Download for Trial
I am not able to download Photoshop CC in order to try it b'se when i click "Try", I get a blank screen and nothing more. Please help!!