Restrict Product Allocation if Planned order is not getting created

Hello All,
We have a scenario that when ever a Sales Order is getting created, Product allocation assignment will be done automatically and planned orders will be created for that requirement in APO.
There are some cases where in because of wrong Variant Configuration, Planned orders wont be created. Our requirement is to delete the Product Allocation automatically or to stop the product allocation assignment if the planned orders are not created.
Do we have any standard setting for doing so or Kindly suggest me some BADI's which can be used for it.
Thanks in advance.
Best Regards,
Srinivas.D

Srinivas,
A rather odd requirement.
Have you tried in SCM APO 'Maintain check instructions' to perform the product check first, then allocation? I would think that if the product check failed, then allocation would not be consulted, and no allocation therefore assigned.
IMG > APO > GATP > General Settings > Maintain check instructions
Best Regards,
DB49

Similar Messages

After MRP planned orders are not getting generated?

HI,
Our bussiness is make to stock and repetetive manufacturing.
We have a prob in running MRP, i enter the demand in MD61 on day basis and after running MRP for some materials all planned orders getting generated wrt to demand but for some materials only some planned orders getting generated means it's not taking full demand ex i have material A and paln is 1000 for 10days i entered demand in MD61 for 10days 100 each and if B material is having same 1000 demand so i enter 100 each then i run MRP and the out put is im getting 10planned orders with 100 each qty for A material where as for material B im not getting full 10 orders only 2 or 3 with 100 each what could be the reason ?
Thanks
KK
Edited by: kiran kumar on Mar 23, 2010 10:19 AM
Edited by: kiran kumar on Mar 23, 2010 10:20 AM

Dear Kiran,
As your saying it is Make to Stock, system will consider Availble stock in Net Req. Calculation
what is startegy mainatined for A & B
if you go with Strategy 11 then system will not consider the stock & Creates the requirements
Regards
Madhu

Sub Order not getting created

Hi All,
           i am debuggin a code which is creating SUB ORDER (iw36) through call transaction method.
The transaction is filling the superior oder ,but after OK CODE it doesnt navigate to the next screen, instead it shows a message log, without any messages.
In the debugging mode I could notice that it fails at the point where FM CO_ZF_ORDER_LOCK_MULTI is called in SAPLCOIH. The parameter 'NOT_LOCKED' is having 2 records, as a result of which the FM CM_F_ANALYSIS is getting called which displays the log.
Please guide me in understading why the sub order is not getting created.
Thanks,
Vasuki
Edited by: Vasuki S Patki on Jul 14, 2009 3:03 PM

Hi Gajesh,
1)                 The Work center does not exist , I checked it in IR02..
2)                 I created the sub order manually , but it works fine. There is no error when creating manually.. But whne it is called from the program it takes a wrong entry for Workcenter that does not exist. But when I change it to the existing Workcenter it proceeds further.
3) I want to know where in the program the KTEXT is being populated, as it is taking an entry that does not exist in the superior order, it is a new entry.
Thanks,
Vasuki

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

Planned Order Does not exist

my Stocks and requirements list shows an MRP element of DEPreq for a element data (halb part number). Double clicking on the element I see the pegged requirement part number and planned order. However. SAP says the planned order does not exist nor does the pegged requirement. I can trace upwards in stocks requirement to another part number. the Data element says DIRECT PRODUCTION. but again there is no requirement for that part nor can i get to the planned order for it either, SAP says it does not exist.
These are related part numbers which I suspect may have come from a common Bill of material; but there is no demand for the high level material but yet I have low level componenets in my Stock and requiremnts.
Is this a table inconsistency issue?
thanks in advance

Hi Borries,
Please go thru link below. This also could help enhance your knowledge in planned order.
http://help.sap.com/saphelp_nw04/helpdata/en/c1/376535449a11d188fe0000e8322f96/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5b/ae39704b8611d182ba0000e829fbfe/frameset.htm
rgds,
nanthakumar

Problem with gross requirement planning pir is not getting reduced

Dear Gurus
I am trying to use strategy 11 for a particular finished product.(having bom and routing)
In the material master I have set mrp type pd lot size ex .strategy group 11, mixed mrp 2,item category group norm, availabilty checking group 02 .
Then I made manually pir for that material in md61 with BSF requirement type .
Then ran the mrp for that material in md02.
Planned orders came .(In md04 screen that gross requirement line text also came as usual )Converted them to prodn order and then did the gr in mb31 with 101 mvt type. After doing the gr the pir should get reduced in md04 screen which is not happening . Where I am going wrong
Regards
Sandip Sarkar

Dear Sandip Sarkar,
                                  It usually happens run MRP and ckeck.
Strategy 11 in summary :-
1. Sales Order creation - no impact.
2. Goods Receipt - minus the quantity for the oldest planned independent in demand management.
   For e.g. if PIR is 100 and delivery 90, PIR becomes 10 (withdrawal 90).
3. Delivery - no impact as delivery is issue from sales order.
This strategy is particularly useful if you need to produce, regardless of whether you have stock or not. For instance, steel or cement producers might want to use this strategy because they cannot shut down production; a blast furnace or a cement factory must continue to produce, even if this means having to produce to stock.
You need to maintain the following master data for the finished product:
Maintain strategy group 11 on the MRP screen.
Set the Mixed MRP indicator to 2 on the MRP screen.
Maintain the item category group (for example, NORM) on the Sales Organization screen.
Maintain the Availability check field so that you perform an availability check without the replenishment lead time (checking group 02 in the standard system).
Strategy                                                        10
Stock is taken into account                           Yes
reduction of planned independent
requirements takes place during u2026   u2026 goods issue for                                                                                delivery                                  order (discrete production),
11
Stock is taken into account                          No
Reduction of planned independent
requirements takes place during u2026            ... goods receipt for a production
                                                                        order (discrete production),
for a planned order (repetitive
                                                                         manufacturing), or for a purchase
                                                                         order (trading goods).
Edited by: Vachanala Rajasekhar on May 7, 2010 11:55 AM

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

AUC Asset not getting created when Internal Order is created

Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
Sanjai

Hi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Invoice is not getting created in Order related billing

Dear all,
I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
Please suggest me if there are any configuration changes i need to do to overcome this problem.

Apart from the suggestion already given, also ensure that
the order is not showing in incomplete log
the order is not blocked for credit limit
You can also cross check in VF04 whether system is fetching that sale order. For information, once you execute VF04, by default, system will check only "Delivery related" check box. You have to manually select "Order related" check box.
G. Lakshmipathi

The pricing procedure in Sales order is not getting copied into invoice

The pricing procedure in Sales order is not getting copied into invoice.
I have created a document type (pricing procedure),based on the document type ,pricing procedure determination is done.
So while creating sales order the pricing procedure is determined but when invoice is created the pricing doesnt refelect in the invoice.How to over come this problem

Hi
Please check the in OVKK, weather you have maintained correctly or not.Also check in the Billing document type details what is the Document pricing procedure that has been maintained.
Regards
Srinath

Savings Plan Contribution is not getting processed in Payroll

Hello Friends,
We are in the process of upgrading our system from 4.0 to 4.7, After correcting the schema as per the release/OSS notes, we are getting Savings Plan Contribution as blank (Retirement Savings).
Cumulation values are coming thru right but current period contribution is missing.
Earlier we had P0169 with P61, now we do not see processing class(PCLS)61 in the PCLS list. Our earlier wage types were referring to PCLS 61, I am not sure if this is causing an issue.
Please let me know if you have any faced similar situation and have an answer.
Thanks & Best Regards
ravi

Ravi,
Appriciate if you could share the solution for your problem in savings plan contribution is not getting processed in the payroll. As I am facing the same kind od problem for my new configured benefit plan ROTH 401k plan.
Please let me know the solution.
Thanks & Regards,
Sunita

Trnsaction IW32 : order Could not be created for notification

Hello,
I have created the notification in IW51
In trnsaction IW32 : I am getting error
Entry MT6
order Could not be created for notification 3570075
Following error could occured : Entry MT6
Please help me out
Regards
Rahul

Hello,
IW51
Notification Type :Z2
Notification      : 3570065
Functionlocation : XYZ
work Type         :cd and ef
Main wotk centr   : ca110 /cusm
planner group     : msw /cusm
after I am saving -
notification 3570099 will saved.
Then when I am trying to change -
menu-service notification-change
I am getting one pop-up-it will directly going to workflow systemworkflow Inbox---
order not created for notification 3570099
follwing error occured : MT6
regards

Production version is not getting created using ALE-IDOC

Hi all,
Am using BD10 to transfer the material from sending to receving system.All the views are geting sent successfuly accept the production version tab data of MRP4 view.The segment is available in the standard IDOC.But prodction TAB is not getting created at receving system .Please help to resolve this issue.
Thank you.

Hi Sanu,
BD10 Send Material..
the reason might be Production tab is not created is the segment is not a mandatory..
and the data is not populating for that fields.
if the segment is not madatorty and data is not available for the fields in the segment ..the prodction TAB will not be created ..
Regards,
Prabhudas

Reservation not getting created from shopping cart for stores order.

Hi experts,
Reservation not getting created from shopping cart for stores order,process used is some custom BADI.Extended classic scenario is the procrss .
Please help me
Thanks in advance.

Hello,
please check below wiki:
Determination of the follow-on document type
Regards.
Laurent.

Restrict Product Allocation if Planned order is not getting created

Similar Messages

Maybe you are looking for