Restricting GL master change at account group level
Hi Experts,
Requirement
To control GL MAster field layout per company code or per account group and per activity.
To restrict GL master change, for certain fields, at account group level.
Let us say, I have activated "Post Auto" in a GL Account during GL creation.
Now while changing the GL, the system should not allow me to change this particular field.
Analysis
This is possible through transaction OB26 (Define Screen Layout for Each Transaction).
However the limitation of the above transaction is that it is applicable for all the account groups for a particular activity (Create/Change/Display).
I do not want to use any development to make this happen.
Please help me in solving this through standard SAP.
Cheers,
Nitish
Hi,
You can make the account group specific field status setting in OBD4.
And you can make the activity specific setting in OB26.
Then SAP will take the field status out of the two above based on highest priority. The priorities are (starting with the highest):
- Hide
- Display
- Required entry
- Optional entry
Fields which are accessed with the transaction master record display are always either displayed or hidden, since you cannot make an entry in a "display" transaction.
If you do not want to use the transaction-specific control, set the field status for all fields to optional. Since this field status has the lowest priority, the account group-specific control is always used.
Regards,
Gaurav
Similar Messages
-
Restrict FI postings from FB60 at vendor account group level
Hi Experts,
We have a requirement whereby the authorization for posting from T-Code FB60 should be controlled at vendor account group level (LFA1-KTOKK).
We are also fine with restrictions at vendor master authorization group level (LFA1-BEGRU/BRGRU).
So a particular user should be able to post to a vendor in acct grp A but not acct grp B from FB60.
However, it seems that T-Code FB60 checks only objects BKPFBLA, F_BKPF_BUK, F_BKPF_GSB, F_BKPF_KOA.
Neither of the above 2 fields are available in these 4 objects.
In case you have a solution for restricting FB60 postings, please reply.Hi.
In vendor maser data you can maintain LFB1-BEGRU='vendor group', and check it in F_BKPF_BEK-BRGRU -
CHANGE OF ACCOUNT GROUP IN VENDOR MASTER
Dear cons
I created a vendor through t-code- XK01 & the accouint group is domv( domestic). I want to change the account group to IMPV( imported). In change mode(XK02) THE ACCOUNT GROUPING FIELD IS NOT AVAILBLE. PL. SOLVE IT.HI,
GO TO XK07
Enter Vendor code,then press Enter, Then enter new Account Group.
System will allow new account group if both the account groups have been assigned same number range otherwise it is not possible.
Regards
Manish Joshi -
How to change the account group of a customer master?
Would like to change Ship-to's to Sold-to's. I know the transaction XD07, but when trying to promote a SH to SP, I receive the error
The planned change is not allowed as the following field groups would be masked by the new account group.
Below the error the table displays Group Name PO Box City and Address.
How do i bypass this and successfully change the ship-to to a sold-to?Hi ,
Chek out ur new account group for Sold to party ,whether all the fields in address tab is marked either optional /required. It should not be in display /supress mode then only u can successfully change ur SH account to SP account.
I think , Number ranges should be same.
if itz not da same number range system will give the message ,but it will allow to change the account group.
As I successfully worked in this issue earlier.
As we all know, we only change the account group from lower to heigher,
ie. sh,bp,py to SP only not viceversa.
*rewards if it helps -
Hi Experts,
We have two different account groups with different number Ranges. When i try to change the customer account group from one to other through XD07 system given the following warning message.
Customer 600021 not in External Sold-to-Party
- number range 0000100001-0000199999
Message number F2691
We have tried to change this warning message in to Error message through OBMSG and OBA5
after that also system showing warning message.
Where we do mistake? is there any other process to do the changing message?Hi,
If You are trying to change the account group of a customer whose partner function is Sold-to-party.
Changes to the account group and the relevent partner functions only made from lower level to higher level.
Example:
Sold-to-party cannot be assigned the function of a payer(Higher level to lower level) because you are trying to change the higher level partner function.
Your can assign sold-to-party function to a payer (Lower level to higher level) because you are trying to change lower level partner function.
Regards,
Krishna Kishore -
Hi All,
Is there anything I need to check before changing vendor account group (with different number ranges) in XK07. User has selected account group wrongly and also posting done for those vendors.
I think there would be no effect in open items.
Thanks,
VishalDear Mr. Visal,
please be so kind to review the documentation regarding the transaction XK07:-
"Changes to the account group and the accompanying partner functions
can only be made from a lower level to a higher level. For example,
this means that a sold-to party cannot be assigned the function of a
payer as fields which have already been maintained for this sold-to
party would have to be masked. However, you can assign the sold-to
party function to a payer."
Therefore, you can change from an account group with fields set as
not visible to optional fields. However, if you are trying to change
an account group with optional fields to other account group with any
of this fields invisible, the system will give you the error message
"You cannot make this change because the new account group
results in the following field groups being switched off:"
And you will not be able to change the account group. This will happen
although you have not updated a value for these optional fields.
Really it depends on which is the field you want to change; there are
some fields that could produce some data inconsistency (reconciliation
account, withholding tax data, and so on).
Please consider that the account group controls the successing
screens and field layout plus it controls whether the numbering
should be internal or external.
Please take in consideration all the above information before doing it.
I hope this can help You.
Mauri -
How to restrict header text changes in sales order level
Dear Experts,
how to restrict header text changes in sales order level change mode
thanksHello Chandu,
how to restrict header text changes in sales order level change mode
In order to restrict changes to Sales Order Header Text, the appropriate User Exit would be USEREXIT_MOVE_FIELD_TO_TVCOM_H. With the help of ABAPer, you can include the simple logic on the basis of Header Text type such that whenever any changes are incurred on the Sales Order header text, updates would be prevented.
Please try out this approach and let us know your latest observation on this issue.
Regards,
Sarthak -
Hi
If we create a customer as sold to party and we want to change the account group of that customer (as a ship to party)
is it possible ?? if yes please suggest me how??
ThanksHi,
For a new customer you can change account group using XD07, But for any old customer already did postings in that then you cannot able to change account group.
Hope this will correct. Thanks!
Kishore -
Effects of changing Customer Account Group
Hi everyone!
What can be the effects of changing the account group of a customer code?
The customer code that will be changed already have some transactions but we need to change the account group.
Thanks a lot!Hi Ricardo
Firstly changes in the account group and all partner functions can be made from lower group to higher group e.g. Sold to Party cant be given a payer role as this role is an existing role for Sold to Party
However you can assign the Sold to party to a Payer ..hope this is clear so u can change only <b>Ship to , Bill to & Payer</b>
The only implication which i see is if the customer is created for more than one Company code/Sales Area its better to block the customer until the customer is maintained for all company codes.
Hope this helps
Cheers -
Changing customer account groups
Hai,
I had a one time customer and Now I want to make him a Sold to party. What changes I have to make to this existing customer?
Regards,
Keyur. PHi.,
We cant change the account group of onetime customer to sold to party in XD07,we can change sold to party to ship to party....,but we cant change one time customer in XD07
Any gurus pls help me out where we can change this
Thanks in advance
Narayana -
If the account group was set up incorrectly and did not get noticed until there was master data against the account- what can be done to correct the situation?
Thanks
rajHello Rajendra,
You wanted to know what to do so I replied accordingly.
btw, the Account groups determine:
- The type of number assignment (So if the new account group has the same number then I dont think it will impact),
- A number range for assigning account numbers
- Which fields are displayed and whether their entry is optional or required (field status) when you enter or change vendor master data (You need to take care for manatory field for new account group).
- Whether the account is for one-time vendors (I dont think it will get affect)
Rest of the thing will be fine.
Try to change it and see if it throws error for any data inconsistancy.
Hope this helps.
Regards
Arif Mansuri -
Unable to Change Vendor Account Group
Hi All,
Due to certain client requirement, Account group for few vendors was changed from ABCD to BLCK (Blocked). Now the clients have come back and asked for the Account Group to be changed back to ABCD.
However, when I go to T-code XK07, it displays the below note prior to change.
Vendor - ELMORERA
Acct Group - BLCK
"when changes made to acc. grp, this is to be maint. for"
Company Code Company Name Purchasing Org Description
X000 X Ltd. 1000 Purch. Org
However, once I enter the account group (ABCD) to which it needs to be changed to, I get below information.
"you cannot make this chage because the new account group results in the following field groups being switched off".
Group Group name Modification Group Group Name
D310 Purchasing Data 041 Account with Vendor
Can someone please help me with this. We have about 1300 vendors with whom we are facing this problem.
Regards
SureshHi
Change vendor Master Data
FK05
To Block / unblock vendors follows this menu path :
Accounting >Financial Accounting >Accounts Payable
Master records > Block/unblock
VENDOR BLOCK/UNBLOCK: INITIAL SCREEN ACCOUNTING
Enter the following mandatory fields:
Vendor : enter the account number of the vendor you wish to block.
Company code: enter company code
Press ENTER button
VENDOR BLOCK/UNBLOCK DETAILS ACCOUNTING
Select one of the following indicators:
All company codes : Selecting All company codes blocks/unblocks the vendor from postings on all company codes
Specified co. code: Selecting Specified co. code blocks/unblocks the vendor from postings against only the company code entered in the initial screen.
Press SAVE button
Delete vendor
FK06
To delete vendor account it need mark it for deletion.
Use Menu path :
Accounting > Financial Accounting > Accounts Payable
Master records > Mark for deletion
VENDOR MARK FOR DELETION : INITIAL SCREEN
Enter the following mandatory fields:
Vendor : enter the account number of the customer you wish to mark for deletion
Company code
Press ENTER button
Regards
udaya -
Restrict material master information at the field level
We have a requirement to restrict change access to certain material master fields, meaning everyone may be able to view the data but not change it. Beyond that, those people who are allowed to change the data can only change certain fields...other people can change other fields (on the same material master view). For instance a simple example would be that someone might have access to change the material description on the basic view but not the material group. Someone else might have access to change the material group but not the description. (Again, this is just a scenario that I'm using as an example, not as a real live case.)
Is it even possible to do this? I'm guessing it's not but I thought I'd ask the "experts" here before I deliver the bad news to our users.
Thanks!Thank you for the information but I was aware of using screen sequence and field selection however how can I use this to allow certain users access to certain fields but not others.
For example in the Basic view I want one set of users for the same exact material to be able to change the Base of Unit Measure while the other user can only view this field but not change it however this user can change the other fields in the Basic view. This sounds like a solution for all fields for a particular materials. I need to be assign fields within a view to different users. -
Hello everyone,
Can someone tell me if it's possible to change the Vendor account group after the vendor has already been created.
I already tried transaction XK02, but that isn't the solution.
If it is possible, can someone help me. If it isn't possible, can someone explain why it isn't possible.
Thanks in advance!Hi
Use Transaction Code XK07
regards
Srinivas -
Have been changed the accounts group in SAP , since 2008 ?
Hello I need to know if the accounts groups in SAP FI has changed or not doubt to the new Chart of Account.
For example , till now the account groups were:
ASO1
ASO2
ASO3
ASO4
ASO5
EXI1
EXI2
ETC, I wanted to know if there are more or less or different or they are the same.
Thanks a lot.Hi,
They are the same.
Rgds
Maybe you are looking for
-
Income tax dedcution is not taking place on medical reimbursement .
Hi SAP-HR Experts . I am facing a issue that for few employees Medical Exemption for incomeTax is not taking place for few employees , like upto Rs. 15000/- amount annually are exempted for Income Tax . a employee whose exemption is taking place /3m1
-
Hello, My G5's download speed has diminished to a crawl. It appears this happened after 10.4.5 Funny thing is, my 12" PB's speed is fine (also running 10.4.5). The G5 is downloading at 175 KB/sec were as the 12" is 325 KB/sec. Both access the interne
-
Web Dynpro error after migration from 7.00 to 7.40
Hi all! I have migrated a Web Dynpro for Java application from SAP Netweaver 7.00 to 7.40. Everything worked pretty good except some dependencies. These were fixed now but now we have an error when using the web gui. We have a reproducable error alwa
-
Error message in Logic "audio configuration contains unknown items"
I am using Logic Studio with an apogee Duet and Mac Book Pro. So far I love the apogee duet for it's simplicity and sound. I have however started to receive this error message working with Logic Studio, almost anytime I start a new track, add a plug-
-
Adding a field in the standard transaction bbpsc01 of SRM
Hi All, The requirement is that a new field (tracking no) needs to be added in the screen of bbpsc01 transaction in SRM using a BADI. The field 'tracking no' is available in the standard table BBP_PDBEI. The BADI definition BBP_UI_CONTROL_BADI looks