Restriction of Time-dependent data (Cost Center) according to a specific role

Dear experts,
Has some one of you implemented a functionality to restrict Time-dependent data (for example, Cost Center) edition, according to a specific role assigned to an End user?
I imagine it is possible, but we should develop an User-exit in order to get this goal.
Let your comments here if possible, so that I can argue with my End user. I will try to give you points if you help me with this query.
Thanks & Kind Regards,
Daniel.

Hello All!
We have talked to Authorizations specialist and he indicated a customizing transaction in FI-AA module called ANSICHT (IMG -> Financial Accounting -> Asset Accounting -> Preparing for Production Startup -> Authorization Management -> Process Asset Views). In this customizing, it is possible to edit an existing asset view and turn on/off fields according to the company needs.
Afterwards, you should request some adjustment in the roles that contain the A_A_VIEW authorization object.
I am considering this question as "assumed answered'.
Regards,
Daniel

Similar Messages

Restricting issue of goods to cost center with respect to material type

Dear Users,
I have a requirement like we want to restrict issue of goods to cost center with respect to material type i.e., we want to issue goods to cost center only through reservation and that too only for specific material types. Is there any standard solution for this, please provide your suggestions.
Thanks,
Manoj

Hi Ajay,
Thanks for valuable input.
I also thought in the same line , but user has the following concern on this:
Assessment Cycle: As per Users, it cannot be used because this will allocate based on allocation basis. But they need, the values that was posted at the time of transaction and as per materials. So it wont be accurate through Assessment cycle,
OKB9: They have different Cost center for different valuation area for the same GL Account.
Hence through OKB9 also, we cannot post directly to COPA.
That's the reason the above option were not adopted.
My other concern to this is:
In CKM3, we have two lines under consumption, one for Normal sales PGI and other is Cost Center.
After doing revaluation of consumption in CKMLCP, we see one line under Cost Center :Revaluation of Consumption Figure"
My question, where can I see that figure whether in any table or in Cost Center report??
If that is also available we can try to match those values and post to COPA.
Let me know your thought on this.
Thanks and regards
Kami

Time dependent data load to BW using Fixed Time Interval selection

Hi,
I'm facing a problem in extracting time-dependent master data to BW. I would really appreciate if anyone can help in this regard.
We have a table in R/3 which has time-dependent data. For example, for a single OBJID we could have multiple records with different BEGDA/ENDDA and different attributes. When we try to load this data into BW InfoObject, we see a time-dependent data selection in update tab of infopackage. We need to select BEGDA/ENDDA in datasource since otherwise during loads we would get a "DUPLICATE RECORDS" load error in BW.
The problem is when we enter a Fixed-time interval Start Data and End Date in the InfoPackage, only the records with that StartDate and EndDate are loaded. Ideally I would want to see all the records whose BEGDA/ENDDA falls in the range of StartDate and EndDate.
I tried modifying the ROOSFIELD table for the data source. I made the BEGDA SELOPTS as GE(16) and ENNDA SELOPTS as LE(64). But still it doesn't seem to work. I checked if the change to ROOSFIELD has any affect in RSA3. Unless we give a range for BEGDA it doesn't seem to behave as expected. Could someone let me know how I can load all records to BW whose BEGDA/ENDDA fall in the range of StarteDate and EndDate.
Thanks,
Anil.

Anil,
If you are using a custom dataSource, make sure the dataSource fields for begda and ennda are labeled "datefrom" and "dateto".
Cheers,
T-

Time-Dependent Data in InfoPackage

Hi, Experts,
I tried to load CO Master Data from R/3, I got some issues as follow:
1. In the InfoPackage creating, what is the meaning of Time-Dependent Data, How can I know what are the properly value range I should entry.
2. After I excuted the Infopackage, I got red color in Monitor, I checked the PSA, some of the data's status were green, some were red which the system said that the records time overlapped, but I couldn't verify this is true anymore. Could you please give me some idea?
By the way , does any body have the documents associated with BW-SD including extraction, Business Content and query design. Thanks a lot

Hi Ryan,
Time-dependent data means data varies from time to time. For example one employee may work in US from Aug - Feb and in Canada from Mar - Jul. Then to maintain such data you have to declare them as time-dependent.
Time-dependent data has date-from and date-to fields. In your case the date-from and date-to have multiple entries thats the reason for the error.
Bye
Dinesh

Infopackage time dependant data fixed time interval

Hi,
I have issue with infopackage. When I tried to load the master data attribute itu2019s not loading the changed data.When I checked the infopackage it has update tab and in this time dependant data section,it was marked as fixed time interval.The changed data in R/3 actually falls under the interval what was entered in the fixed time interval period.But it was not extracted.
I found that if we enter the exact specific dates interval in the fixed time interval,it fetches data.But we canu2019t enter each dates interval for all changed data in R/3. It needs to fetch all the data.When I try to remove the fixed time interval,it is not allowing as it is mandatory field.
Please suggest me how to fetch all the records for time dependant data.I tried other options like routine and variables.But it doesnu2019t work and it is fetching data only if we enter the exact dates interval.
Regards,
Ramana

There is nothing to do with PL/SQL.
You can refer below links:
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96524/c12parti.htm
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10739/partiti.htm#i1006727

Change to cost center in time dependent data. Can I rerun depreciation YTD?

I need to change the cost center in October (Period 10) Period 9 and prior are already closed. I thought that since I put the Interval for the new cost center as 1/1/11 that it might do and adjustment in October reversing the depreciation posted for the old cost center and put the YTD depreciation in the new cost center, but it did not. it only posted the current month depreciation to the new cost center. Is there any way to do this? Thank you very much.

Hi. Thanks for your reply. I went into the ABAA screen, but I am afraid to process this transaction because I do not understand what is going to happen. I cannot find any documentation that explains this. I have already changed the cost center on the asset and run depreciation. It posted the current month depreciation to the new cost center, but it did not make a correction to the prior periods. I am not creating a new asset, i just want to reclass the prior months depreciation (in the current year) to the new cost center. In case it will help I provide some details:
Asset acquired 5/1/11 Depreciation posted to Cost Center A From May - Sept $1,796.06 per month x 5 = $8,980.30
Before posting Oct depreciation, I went to Master Data - Time Dependent - and changed the cost center as of 1/1/11. So I now have two intervals: From 1/1/1900-Cost Center A, and From 1/1/11 - Cost Center B. I then ran the regular depreciation for Oct. It posted Oct Depreciation of $1,796.06 to the new Cost Center-Cost Center B. My total YTD depreciation is now $10,776.36, but it is split between two cost centers. I need to move the depreciation from Cost Center A to Cost Center B for the prior months. If it was a Journal Entry, I would do it as follows in the month of October, so my YTD numbers would be correct.
Debit Depreciation Cost Center B $8,980.30
Credit Depreciation Cost Center A $8,980.30
Then when I run my October numbers it would show zero depreciation in Cost Center A Year To Date (and negative 8,980.30 in month of October)
If i follow the steps you propose, what would be the result? Thanks so much!

Change of time dependent data

Hi Experts,
I have a cocode,for which BA financial statements are activated and also cross co code cost accounting is activated.
we are using dep area 31 .
for this company code time independent organisational units is activated.
the issue:
When i change the Cost center in the master data,a new doc is created.but when i see in asset explorer and click on a transaction to see the doc i found LC2 currency(2nd local currency) is not updating.
other info:
the two cost centers(old and new) were assigned the same co code.cost center currency is sa me as co code currency.
exchange rates were maintained.when i see in the header data of teh doc i can see teh translation rate also.
what could be the reasons for not updating the LC2 column.

Hi,
Is area 31 set up for the 2nd local currency? We need to have a depreciation area set up for 2nd local currency.
Thanks
Muru

Time costraint on Cost Center (K) relationships

Hi everybody.
I would ask for your help about the following problem I'm not able to solve :
I defined a new relationship, linking the object K (Cost Center) to a new object I created (ZE).
The new relationship is defined as B992 (bottom-up). This relationship should link one Cost Center to only one new object, so I set the Time Constraint for this relation to 2. The other way relationship (top-down) A992 is set to 3, since I could link one new object to more than one Cost Center.
In the view V_T777ZIT I have the line :
K 1001 Relationships B992 Cost Center assignment 2
The problem is :
the system does not perform any check on the unique assignment of a Cost Center to an object ZE and a multiple assignment is allowed.
Have you any idea about the reason of this ?
Thanks a lot for any help.
Francesco

In order to use this table you should have K 1001 B992 3 in table T777Z.
Define Time Constraint Depending on Target Object Type
In this step, you define alternative time constraints for relationships depending on the target object type.
Example
A position in your enterprise can be described by only one job (target object type "C") but by as many tasks as required (target object type "T").
Requirements
You should have already carried out the step Maintain relationships and entered the value "3" for the time constraint of the corresponding relationship.
Standard settings
The standard SAP R/3 system contains a number of predefined time constraints that are target object type-dependent.
Recommendation
It is recommended that you use the time constraints supplied.
Activities
Define you own target object type-dependent time constraints if necessary.
Further notes
The assignment of additional conditions for this function may only be carried out by SAP since it is equivalent to a program modification.

Need to understand HR Time-dependent data

Hi All,
I am trying to understand how time-dependent master data works with fact table/infocubes.
Suppose I have a simple cube with infoObject: 0EMPLOYEE, 0HRPOSITION. And the data are as follows:
0EMPLOYEE..............0HRPOSITION
300............................101
Futhermore, my 0HRPOSITION master data is time dependent with an attribute of 0FUND and the master data are as follows:
START-DATE....END-DATE.....HRPOSITION...FUND
01/01/2006........05/15/2006....101..................A
05/16/2006........12/31/9999....101..................B
And if I were write a query against the cube to show the Employee #, the Position #, and the Fund, I would expect the query result as follows:
300.....101....A
300.....101....B
However, my actual query result is only one row. Why?
Please any help will be much appreciated.
Thanks,
BQ

BQ,
Since it is timedependent master data, it will show only one record that active record.( because current system date will align with only one entry in 0HRPOSITION )
RC

Infotype Header Data - Cost center- System to read the latest data

Dear Group Members,
I am modifying Infotype Header data and calling Cost center (Field - KOSTL) in header data via modifying header data in table T588J. The cost center values appears on the header data (As stored in Infotype 0001) however it appears with the oldest data. i.e. if the employee cost center had been changed after his joining system does not picked up the Latest data/ Latest cost center value.
Any one on how to resolve this issue with SAP Standard functionality.
Regards
VISHAL SAXENA
SAP Specialist - HCM

Hi,
The answer to your question lies in table V_582A_B. You can either access it through SM30 or by following IMG path:
SPRO>Personnel Management>Personnel Administration>Customizing User Interfaces>Change Screen Header>Header structure per infotype
There is a u201Cchoose datau201D indicator for each infotype. If that is checked, the header displays data as per the start date of infotype displayed; otherwise, it shows data valid as of system date. Please bring up SAP help on the field by F1 for more information.
Also check table T588H (data selection field) as it has some dependencies for the above mentioned settings. The table can be brought up from:
SPRO>Personnel Management>Personnel Administration>Customizing User Interfaces>Change Screen Header> Infotype header data selection control
Hope this helps.
Donnie

Authorization for Time Entry on Cost Center Level

Hi Experts,
Would like to know, if we can do authorisation for time entry on the base of cost center. For example, an employee worked for 8 hrs and out of that 2 hrs worked for different cost center. That 2 hrs should be approve by Manager of that cost center and 6 hrs from his current cost center.
I thought of Structural Authorisation but not sure how it will work. I would appreciate prompt response on the same.
Thanks,
Aashish

I was pointing out [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] about requesting "promptness" from what is a voluntary effort here to help each other and help those who first try to help themselves (keyword: "search").
Actually, I noticed that you had cross-posted this thread to the HCM forum. Normally, we move threads to other forums which are more appropriate, and often lock cross-posting. This is one of those grey areas between technical and functional, so I turned a blind eye on it.
I am hoping that there will be a functionality to mirror good questions to other related forums without having to cross-post. This would be very usefull for sure but the question would have to be good and the person who asked it would have to have a good track record of respecting [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]. Most likely moderators would be the only ones to "mirror" good questions, unless they contain words such as "urgent" or "ASAP" or "prompt" or "points will be rewarded", etc...
Cheers,
Julius

Master data records for time dependant data

Hi
In R/3. say master data has 1500 records. In BW, while loading this, i get the same number of records in monitor.
But when i check the maintain master data for this info object, I find each row being duplicated. The difference being the valid to and valid from date. The info object is time dependant.
So my question is: this adjustment done...is it ok continuing forward or do we change something now so that i dont see duplicate rows?
Thanks in advance
AR

hi,
everything is ok here (I assume you have timeframes for e.g.: 01.01.1000 - 27.12.2005 and 28.12.2005 - 31.12.9999).
If you are working on developement system now - change something time-dependent in your master data tommorow (in your source system) and extract delta. Two new periods will be created and you will have 3 records, e.g.: 01.01.1000 - 27.12.2005 , 28.12.2005 - 28.12.2005 and 29.12.2005 - 31.12.9999.
Regards,
Andrzej

Getting latest record from time dependent data in DSO

Hi folks,
I have a standard DSO that is built on top off a time-dependent object. Users don't need the daily history and the last entry of the month will suffice so we are only going to have 1 record per month at the most for the object. The standard dso object key thus contains the infoobject key and Calendar month which is derived from the 'From Date' of the infoobject.
The users will running queries on this dso based on the Calendar month. So for the months, where record is available - it is a simple query. But get te data for the month where data is not available.
Example:
Key           Month
123           Jan 2014
123           Jun 2014
So when the user runs the report for either of Feb/Mar/Apr/May 2014, the Jan 2014 record should show up.
For anything June 2014 onwards, the Jun 2014 record should show up.
Thanks for your suggestions!

To month should be a part of data fields lets understand the behavior roughly with the above quoted example.
Initial load to dso :
123           Jan 2014        Dec 9999
now change happens in master data new data record created with the to date fixed to 31.12.9999 and old record to date less than the from value of new record.Correct!
Next load from master data to DSO.
123           Jan 2014        May 2014
123           Jun 2014        Dec 9999
So what happened in this case that based on the employee and To month as key first record will get overwritten and new record will be appended as well.
And rest you can handle at BEx level.
Hope this works.
Regards,
AL

Changing the time dependent data

Hi
When I am trying to change the Cost center in the Asset Master, I am getting the following error:
Fiscal year 2007 is already closed in Financial Accounting.
Message no. AA669
Diagnosis
You have initiated a recalculation of asset values for fiscal year 2007. However, fiscal year 2007 is still open is Asset Accounting, but not in Financial Accounting.
System response
Due to this inconsistency between the General Ledger and the the subsidiary ledger, processing is terminated.
Procedure
Close fiscal year 2007 in Asset Accounting as well.
I have executed the TC-AJRW & then AJAB. It worked properly in DEV client.When i did the same in prod. client it is giving the same error.
Now what to do.
Thanks
shivaji

Hi
I have executed the TC-AJRW & then AJAB. It worked properly in DEV client.When i did the same in prod. client it is giving the same error for some asset & for some asset it is allowing to change.Why it is like this.
Pl. advice.
Thanks
Shivaji

Moving time-dependant data from one table to another (archiving)

Hello all
I would like to know if there's an easier solution or a "best practice" to move data from one table to another. The context of this issue can be found within "archiving".
More concretely: we have an application that uses several tables to log information to.
These tables are growing like crazy, and we would like to keep only "relevant" data in those tables, so I was thinking about moving data from these tables that have been in there for, say 2 months, to "archiving" tables.
I figured there must be some kind of "best practice" to get this done.
I have already written a procedure that loops the table that has the time indicator and inserts the records from the normal tables into the archive tables (and afterwards delete this data), but it seems to be taking ages to get it done.
Thanks in advance!
Message was edited by:
timschraepen

There is nothing to do with PL/SQL.
You can refer below links:
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96524/c12parti.htm
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10739/partiti.htm#i1006727

Restriction of Time-dependent data (Cost Center) according to a specific role

Similar Messages

Maybe you are looking for