Resubmit and notification in case of error

Hi,
In Oracle B2B if there is error while sending outbound or Inbound message, how can we resubmit the messages automatically.
Also is there any way to send the notification in case of error while sending the messages.
Thanks,
Arun Jadhav

Hi Arun,
As far as Resubmittting is concerned, there are two ways by which you may resubmit a message in 11g -
1. Through UI (http://blogs.oracle.com/oracleb2bgurus/2009/09/what_do_i_like_most_in_11g_-_r.html)
2. Through Resubmit command line utility (http://blogs.oracle.com/oracleb2bgurus/2009/09/b2b_commandline_utilities.html)
Notification is not an in built mechanism in Oracle b2b. You may like to implement the same using BPEL. As Nitesh mentioned, by default exception/error message is enqueued to IP_IN_QUEUE and has the recipient name b2berroruser. You may develope a BPEL process listening for error messages (recipient name=b2berroruser), and perform required notification processing (EMail, SMS, Fax etc.) in that.
Regards,
Anuj

Similar Messages

Having problems getting podcast on iTunes, tried to resubmit and got an already submitted error

Having problems getting podcast on iTunes, tried to resubmit and got an already submitted error. How can I get the podcast on iTunes?

You didn't need to get it removed: you can make any changes to a feed that you want, changing, adding or deleting episodes, and iTunes will pick them up.
However, in the present situation you have fallen over a bug in the submissions process. The workaround is changing the title; as this hasn't worked you need to change the feed URL if possible, and also you could change the contents of the 'link' tag.
If you can't get it sorted you could try emailing Support at podcasts 'at' apple.com and asking them to reinstate you (give them all the details) - their responses are a bit variable, but they may help you.

Purchase order fax notification in case of error

Hello Everybody,
We have the following scenario:
ERP 6.0
sending purchase order via fax manually(ME9f) after approval
when fax doesn't reach the recepient, usually the person who sent the fax, automatically receives a document to SAP inbox with information that fax with PO nr xxx did not reached the recepient. However in some cases, it goes not to the sender but the approver. Does anybody knows the rules here? If I go to SOST transaction I can see that in those 'weird' cases, the approver is the sender but users say, that he never sends any POs. Any clue what can it be?
kind regards,
Robert

Hi Arun,
As far as Resubmittting is concerned, there are two ways by which you may resubmit a message in 11g -
1. Through UI (http://blogs.oracle.com/oracleb2bgurus/2009/09/what_do_i_like_most_in_11g_-_r.html)
2. Through Resubmit command line utility (http://blogs.oracle.com/oracleb2bgurus/2009/09/b2b_commandline_utilities.html)
Notification is not an in built mechanism in Oracle b2b. You may like to implement the same using BPEL. As Nitesh mentioned, by default exception/error message is enqueued to IP_IN_QUEUE and has the recipient name b2berroruser. You may develope a BPEL process listening for error messages (recipient name=b2berroruser), and perform required notification processing (EMail, SMS, Fax etc.) in that.
Regards,
Anuj

ESB error handling and notification features

Hello everyone,
I am newbie to oracle SOA ESB. I am an oracle apps guy.
This being my first post to this forum, I have a lot of questions. :-)
For a small intergration requirement, we are looking for a good integration tool
Some requirements are:
1) Flat files will be generated by concurrent programs on oracle apps which need to be transferred to legacy systems.
2) Pick the data from apps tables and insert them into another database. Not much translation required.
After some research, found ESB to be a good fit.
Before actually start using it, we wanted to do a couple of POCs.
So far we are using shell scripts for ftp process. We opted for an integration tool to have DB to DB transmission. Apart from this we need better error handling and error notification mechanism.
Some error conditions:
1) Unavailability of ftp server or Database server.
2) Permission issues. Say some files may not have read, write, deletion permissions. They need to be caught and notified.
3) Mandatory field missing while inserting data which is read from a flat file into a DB table etc..
My initial thoughts on error handling are:
Connection error: To retry for connection errors. If the retry fails send notification via email and also write the failed connection details into an error log file(apart from the server log file).
Data mismatch: NOtification to be sent with the error details.
I would like to know What happens to the file if the destination ftp server is unavailable while ESB is trying to FTP the file. Will ESB retain the file with itself and FTP the file once the ftp server is up?
In BPEL I could see try catch blocks which can be used to handle the errors and thus send notifications.
ESB documents introduced terms like error hospital related to error handling but I was not able to figure out a way of implementing them. As I am not well versed with XML and WSDL I am probably unable to use the fault tab which is in the routing service. I feel Oracle could have given some samples that explain about ESB error handling.
Also to my dismay, adapter docs say that there is a limitation of 7MB size for ftping. Although our file sizes often fall below this size, I would want to know if there is any workaround to over come this size constraint.
I think I put a lot of stuff in a single post and may be in the most haphazard way. Please bear with me.
Please suggest me of some documents if any related to my questions.
Would be really great if you can give me a straight forward solution to all the above problems
Hope this forum would be a great help to me.
Cheers,
Robert.

I have worked on a few SOA Apps implementations. Some successful and some not so. It really comes down to the type of integrations.
But I would say the majority of your integration will be batch as this is what eBus is all about. If this is the case then I would recommend Oracle Data Integrator. If you go Oracle Data Integrator Suite it includes Service Bus and BPEL. ODI has an eBusiness Suite adapter as well.
The good thing about ODI is that you can use it for data conversion, that conversion can then be reused once live, so the conversion is not throw away.
In SOA 10.1.3.4 the limit of 7MB has been resolved but you must be using the file / FTP adapter for input and out, from the sounds of it you want to call concurrent programs so this probably wouldn't work.
cheers
James

Using AIA for Error Handling. Logging and Notification Services

hi,
In our project we usie OSB and BPEL for integrating different applications.
There is a suggestion that we should use AIA to just use the Error Handling, Logging and Notification services from AIA. I am not sure about this use case, as most of these services mentioned can be replicated in BPEL. Except for the AIAAsyncExceptionHandling BPEL process, i guess all other functionalties provided by AIA can be easily developed in BPEL or OSB alone.
However, would like to hear from you guys about this particular use case. Is it advisable?

Hi,
It's an issue with 10.1.3.4 OBIEE. (whem using IBM LDAP)
References
BUG:7363517 - INTERNAL BI FAILURE ON STARTUP
They issue can be resolved by setting LD_PRELOAD=/path/libibmldap.so
Here are the steps:
. sa-init.sh
export LD_PRELOAD=/path/libibmldap.so

I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......

I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......

Forgot to mention I live in Peru Southamerica, the cell provider is Claro (America Moviles).

MAM RFC Error with Order and Notification SyncBo's

Hi everyone, can you please advise on a problem I'm having when downloading 2-WAY SYNCBO MAM objects.
I am able to download all syncbo's to my client with my username. This includes Orders and Notifications.
But.....whenever I use a different username only some of the SyncBO's come over. I am missing MAM25_001 and MAM25_010 data. Here is what I have done so far:
- Ensured username had exactly the same SAP security profile as I do, including the MI authorization objects.
- Ensured username was configured the same in the IMG.
- Re-generated and re-replicated my SyncBo's.
- Checked table MEREP_10100. It showed no Order or Notification data.
It does not make sense why everything works for me, but not for other usernames on my network.
Here is the RFC error I get from the Middleware using MEREP_MON:
RFC system Error:
Z_MEREP_GEN_S01_____MAM25_010 has finished for run number 0000019624 and runtime counter 17.
Please help. Thanks.

Hi Alex,
Could you please reply the SP levels of the MI Client, MI server and MAM application?
Also is your client device a PDA?
You could try out few things ( not sure whether they will help)
1. Sync several times (may 6 times) for the other users.
2. Remove the MAM application for the one of the other usernames from the webconsole(which is not able get the data) and reassign it.
3. Try the username on some other device.
All the best!!!
Regards,
Rahul

Updating database table based on BAPI response in case of error

Dear Experts,
My scenario includes pulling records from database stagging table, and push one record at a time to BAPI_ALM_NOTIF_CREATE.
I am using sender JDBC adapter(with select query and update query to mark records as processed).
My question is : Once XI selects records, immediately status is updated in stagging table for the selected records as processed. what if BAPI could not create document? In this case I need to update status of that record as "Not processed".
What should I use?
If BPM, then please tell me the steps.
Is this possible without BPM?
What are the chances of failure between XI and BAPI?
Please provide your inputs.
Thank you.
Div

>
S.R.Suraj wrote:
> Hi Divyesh,
>
> Your steps are correct..
>
> 1. JBDC will read record with code = 0 and make it 1...
> 2. Once the bapi process is completed all these read records shoudl be made as 2 (if completed successful) else 0 if bapi went into some error.. so that again the jdbc adapter can poll these records and give back to bapi for processing...
>
> Now your questions
> >>So after selection and updation only proxy call will be done right? So for every polling of jdbc adapter ,proxy call will happen?
> YEs every poll of jdbc will result in a proxy call and every time it will contain next set of records (as the earlier one have already marked as 1)
>
> >>How to achieve this?
> Since this is a synchronous scenario JBDC->XI->Proxy and reverse, I have suggested to use responseonewaybean as a module in sender jdbc adapter (because sender jdbc cannot act synchronously thats why you need to use this module)..
>
> >>Do i need to use BPM? please suggest steps.
> and if this is not working then go for BPM..the steps as i mentioned in my first thread..
>
> Regards
> Suraj
Hi Suraj,
Thanks a lot for your support.
It would be good if you can provide your inputs.
Stagging table records status:
Flag = 0 (XI will poll records)
Flag = 1(XI has polled records and XI will se tthis flag by JDBC adapter)
Flag =2 (should be done based on response from Proxy Tables parameter) Proxy will set tables parameter which will include info on error message and type.
(Now based on new requiremets: for error records status should not be reset to 0 so that XI can poll records again, now stagging table should contain error records(for which proxy can not create notification in SAP) with error message and status flag 2)
Now scenario would be JDBC to Proxy.
Polling interval for JDBC adapter should be 1 minute.
So I think status 0 to 1 will be done by XI after immediately selecting records.
But how about Status 2 that has to be set only for error records only and with error information.
I have to update stagging table records with status 2 and error info based on proxy table response. How this can be done?
This updation will be done in case of error only.
I was thinking this aproach:
We can have two interfaces.
First interface will be jdbc to proxy:
JDBC adapter select and update records with flag =1 and then send to proxy call and create document in SAP. At SAP side if document can not be created then they will store that error info in some table.
Second Interfgace:
Client SAP Proxy will periodically run and send these error records info to XI and XI will update stagging table records accordingly.
Suraj, What is your sugestion in this solution? Do I need to use Responseonewaybean?
Thanks Suraj
Div

Imessage and notifications work intermittently on ipad mini

I got my ipad mini about a week ago and ever since I got it, my notification system works between certain times which is usually between 9 pm and 5 am, sometimes they also work during the middle of the day but that's for 2 or so hours and then they just stop working again. imessage does the same thing and if imessage isn't working then the notifications for anything don't work either. I have googled some solution and I do have my notifications set to ON, my date and time are set to autoupdate, the DNS for my network is also set to 8.8.8.8 but nothing seems to work (I've also tried 8.8.4.4 for the DNS), I've tried rebooting the device and I'm also running the latest versio of ios6. Could anyone tell me what my problem is ?

Try this solution offered from a previous thread:
DemoApr 2, 2015 12:24 PM Re: no FaceTime or iMessage on iPad with 8.2
Re: no FaceTime or iMessage on iPad with 8.2in response to Norman Duke
Vince0909 in the thread that is referenced above made this suggestion and it worked for a number of users. You may still need to resolve the time zone issue as well.
Vince0909
Re: imessage and Facetime sign in activation error iPad ios8.1.2in response to hann_christineIn my case it was not working for a week or two (iPad Air ios 8.1.3).In setting under iMessage I entered a dummy login just to see what I would get ... a pop-up show up for password confirmation the password.I canceled and I re-entered the correct username and password correctly and it works ... it's worth a try on your side

My iPhone won't restore. It is in dfu mode and when I try and restore I get an error 21 message. I have tried to reinstall iTunes and disable my security and firewalls. No luck apple say send in for a 348 buck hardware reset/fix. Any thoughts.

I am open to trying anything. Until I plugged it into computer I just kept getting a apple symbol then it would turn off every five second it would light up then turn off. I man the boost network and don't live near an apple store. 3 hours away! Would Telstra or Optus shop look at it ? Or should I just send it too Apple and pay. It is 14 months old my iPhone 5

Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton

Hard drive and Time Machine "Invalid Node" Error

All,
I have a late 2006 iMac, which I know must be at the end of its life now, but at the weekend my main internal HD developed an error, and it wouldn't boot, even from the recovery partition.
I managed to find my old Snow Leapard disks and ran Disk Utility on my HD (when it actually saw it) and the error it came back with was "Invalid Node". After trying many things, I had to reformat and reinstall from my Time Machine back up, which went really well.
However, once all restored it tried to do a backup and it failed. I then went into Disk Utility again and it found the same error on the Time Machine drive.
Therefore, my question is, could the back up process have copied an 'error' to my back up? Or is this a fault somewhere else (Disk Management etc) that I need to watch in case it cases errors with my other drives that have important information on?
Any help would be appreciated.

Since the internal drive has failed, it's possible that some files were corrupted or not saved at all before it failed completely. There's no way of knowing which ones. After replacing the drive (or the computer) and restoring from a backup, you'll have to check the integrity of important files by opening them. Damaged files may be intact in an older snapshot.

Remove and check cartridge on right error message on 7410 all in one

I recently changed the black ink cartridge in my 7410 all in one printer. After changing cartridge it gave me an error message of " Remove and check cartridge on right". I have tried removing and reinstalling , cleaning connection points with clean damp cloth (water) and still cannot get error message to go away.
Any ideas would be greatly appreciated. Thank You.

NoProblemAtoll wrote:
I know this is an older thread but being it is a top Google result associated with the "Remove and check cartridge on right" error it justifies adding a helpful suggestion for other. Our findings have been HP Printers are very biased against refilled \ recycled cartridges. I own a total of (5)x HP 7310 and HP 7410 printers in my IT Consulting office. These are feature rich MFP’s with an abundant supply of ink available at generously economical prices. On the face of it, it sounds like a good reason to keep a bevy of last gen printers around. EXCEPT the printers work great with the $30-$50 brand new HP brand 96 cartridges from Office Depot or Staples. Unfortunately if you try and buy some recycled cartridges off ebay the Printers detect the recycled\refilled cartridges as a previously depleted HP cartridge that may not be genuine and the units suddenly turn on you. Miraculously the "Remove and check cartridge on right" only manifests itself with non-HP brand cartridges or cartridges that have been refilled. (We have even tried to re-fill out own refreshly depleted cartridges with like results.) Think of it as an HP service reminder conveying you forgot to pay HP their $30-$50 profit on your ink this go round. Remember you need HP Branded ink cartridges (HP = Homogeneously Proprietary). It’s like an intention flaw written into the firmware. Best guess (purely on conjecture) is there is a check in the firmware/drivers for if the cartridges has been previously installed, previously depleted, max install count, and expiration date validation. If it encounters a condition it doesn’t like you get this nondescript error.
[advertisement snipped]
The above post is filled with conjecture and speculation, but is not based on fact. The Officejet7410 is not programmed to reject refilled/reman cartridges. It will check cartridges electrically for various things and will reject cartridges that fail. Typical failures would include a cracked printhead (caused by rough treatment - dropping the cartridge even a few inches for example), or open electrical connections caused by debris on the cartridge contacts. Cleaning the cartridge contacts as shown in the document here may resolve the issue in case of poor electrical contacts.
A cartridge that has been previously used in a different printer will likely be marked as empty, but the printer will happily print with a cartridge detected as empty.
The reality is that the quality of refill and reman cartridges are very variable, but generally poor. The study here has a study conducted by a testing facility, here is another study.
My personal experience has been similar. I donated an HP all-in-one to my son's high school years ago. Sometime later I got a call from the teacher complaining that it was not printing properly. I went and took a look and found they had put in a renam color cartridge that was not printing one of the colors*. They tried another cartridge, which also had a problem and then finally the third cartridge worked. I asked why they used renam cartridges and he said they bought these because they were cheaper. I asked if they were 1/3 the cost....
*The color missing had nothing to do with the printer - blotting the bad cartridge on a damp tissue gave only two of the three colors that would normally be present.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Alert in case of errors in XI tx sm58

Hi,
we discovered that we sometimes (not more often than once a month) have errors in XI tx sm58, e.g. when a target SAP system has been down and idocs have not been delivered.
Is there an easy way to monitor sm58 and send e.g. an email in case of errors?
Thanks,
Philipp

Hi,
May be you can have a check on "ARFCLOG" table so that you can generate the alert.
for the blocked/Queued IDocs.
Hope this helps.
-Prasad Babu.

How can I keep iPhone 5 mute and viberated for all the sounds and notifications with the mute button on?

If turn on the mute button, my iphone 5 is mute. But I can not get informed if the alarm or timer ends. iPhone 5 is mute and doesn't viberate. I want it mute but viberate under the mute button.
The Timer cann't viberate with the mute button on. I want it viberates without sound especially when I study in the Liberaby. I need to practice my pace with the Timer. I don't know whether it is because of my mistaken operation or because of the fact that the iPhone 5 can not make it.
I think it should work like this, the mute button can mute all the sounds and notifications and at the same time, the phone can viberate to keep me informed when a new email comes or there is a twett or the timer ends with viberation.
How to set the dialpad tone? It is silly to dia a number with a tone.

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/lightroom

Resubmit and notification in case of error

Similar Messages

Maybe you are looking for