Result Source Query Builder Filter for Content Sources

I have several content sources that I want to add to a result source as a property filter. It works fine if I just have one but when I add multiple content sources it does not give me all the results. Is there a way to add more than one content source
filter to one result source.

Hi SpGurlz,
How did you set the filter with content source in the query builder for the result source?
I tested with more than one content source as filter in the query builder for the result source in my environment, and all the corresponding results were displayed fine.
The query text for the result source was set like this: {searchTerms} contentsource:file1 contentsource:file2.
Remember to add a space between the “{searchTerms}”, “contentsource:file1” and “contentsource:file2”.
You can provide the query text of your result source here and I will help to check the logic.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • Search Refinement Panel webpart - filter on Content Source

    Hi,
    I have 6 content sources and would like the search refinement panel to be able to filter by Content
    Source.
    I have the refinement panel filtering for various other Managed Properties, but I'm struggling to get it to work for Content
    Source.
    So, for example, if my content sources were called 'Content Source 1', 'Content Source 2' etc. then then Search refinement Panel webpart would show:
    Content Source
    All Content Sources
    Content Source 1
    Content Source 2
    And clicking on the filter link would refresh the page and show results only from that particular content source.
    The content sources are a mixture of SharePoint and BCS databases and I have no access to modify either.
    I have tried making my own 'MyContentSource' Managed Property in Search administration, but I don't know what the mappings would be.
    Can anyone help?
    Thanks.

    Thanks Lisa, but scopes won't work here.
    We have scopes defined already, one for each content source and 1 convering all the content sources, along with other conbinations of multiple content sources.
    The scenario is this:
    When I first visit the search results page, I want to see results from all the content sources so I use the scope containing all 6.
    Then I want to use the refinement panel webpart to filter down to a single scope, all from the search results page.
    This is something that is very easy to do using the Google Search Appliance and our company are currently choosing between it and Sharepoint search going forward.  I think this will be the deal-breaker if I can't get this to work under SharePoint search.
    At the moment I'm thinking that I might be able to do it using the SiteUrl or ContentType or something, along with a custom filter in the xml of the Refinement panel.  Haven't tried it yet.
    So along the lines of this:
    <CustomFilters MappingType="ValueMapping" DataType="String" ValueReference="Absolute" ShowAllInMore="False">
          <CustomFilter CustomValue="[name of my content source]">
            <OriginalValue>[specific site url or content type maybe?]</OriginalValue>
          </CustomFilter>
    Unless anyone has any better ideas?

  • Can i able to put filter for my source flat file?

    Hi all,
    Please help me with the best practise of ODI.
    My source is flat file and i want to put filter.
    can i able to put filter for my source flat file? If yes, please help me with the best practise of applying filter.
    Regards
    Suresh

    Hi ,
    If you are trying to create at the Model -->Datastore ---> Filter ---> Insert condition
    then it will not work for File technology . You will get " Invalid Format Description "
    But you can specify a filter in the interface .
    Just drop the column(s) from your flat file data store into the canvas and then specify the filter condition .
    Thanks,
    Sutirtha

  • DAC Execution plan build error - for multi-sources

    We are implementing BI apps 7.9.6.1 Financial& HR analytics. We have multiple sources ( Peoplesoft (oracle)8.9 & 9.0, DB2, Flat file ....) and built 4 containers one for each source.We can build the execution plan sucessfully, however getting the below error when trying to reset the sources . This message is very sporadic. We used workaround to run the build and reset sources multiple times. This workaround seems to be working when we have 3 containers in execution plan and It is not working for 4 containers. Does anybody come across this issue.
    Thank you in advance for your help.
    DAC ver 10.1.3.4.1 patch .20100105.0812 Build date: Jan 5 2010
    ANOMALY INFO::: Failure
    MESSAGE:::com.siebel.analytics.etl.execution.NoSuchDatabaseException: No physical database mapping for the logical source was found for :DBConnection_OLTP_ELM as used in TASK_GROUP_Extract_CodeDimension(null->null)
    EXCEPTION CLASS::: com.siebel.analytics.etl.execution.ExecutionPlanInitializationException
    com.siebel.analytics.etl.execution.ExecutionPlanDiscoverer.<init>(ExecutionPlanDiscoverer.java:62)
    com.siebel.analytics.etl.client.view.table.EtlDefnTable.doOperation(EtlDefnTable.java:189)
    com.siebel.etl.gui.view.dialogs.WaitDialog.doOperation(WaitDialog.java:53)
    com.siebel.etl.gui.view.dialogs.WaitDialog$WorkerThread.run(WaitDialog.java:85)
    ::: CAUSE :::
    MESSAGE:::No physical database mapping for the logical source was found for :DBConnection_OLTP_ELM as used in TASK_GROUP_Extract_CodeDimension(null->null)
    EXCEPTION CLASS::: com.siebel.analytics.etl.execution.NoSuchDatabaseException
    com.siebel.analytics.etl.execution.ExecutionParameterHelper.substituteNodeTables(ExecutionParameterHelper.java:176)
    com.siebel.analytics.etl.execution.ExecutionPlanDesigner.retrieveExecutionPlanTasks(ExecutionPlanDesigner.java:420)
    com.siebel.analytics.etl.execution.ExecutionPlanDiscoverer.<init>(ExecutionPlanDiscoverer.java:60)
    com.siebel.analytics.etl.client.view.table.EtlDefnTable.doOperation(EtlDefnTable.java:189)
    com.siebel.etl.gui.view.dialogs.WaitDialog.doOperation(WaitDialog.java:53)
    com.siebel.etl.gui.view.dialogs.WaitDialog$WorkerThread.run(WaitDialog.java:85)

    Hi, In reference to this message
    MESSAGE:::No physical database mapping for the logical source was found for :DBConnection_OLTP_ELM as used in TASK_GROUP_Extract_CodeDimension(null->null)
    1. I notice that you are using custom DAC Logical Name DBConnection_OLTP_ELM.
    2. While you Generate Parameters before Building execution plan , Can you please verify to which Source System container you are using this logical name DBConnection_OLTP_ELM as a source? and what is the value assigned to it
    3. Are you building Execution Plan with Subject Areas from 4 Containers.? did u Generate Parameters before Building Execution Plan?
    4. Also verify at the DAC Task level for the 4th Container what is the Primary Source value for all the Tasks? (TASK_GROUP_Extract_CodeDimension)

  • Results in Query Builder Differ From Report Results

    I've got a report I built in SSRS using an SSAS dataset. The problem is that the results differ between the query builder result set and the actual report. For some reason, when running the actual report, certain rows are being filtered out, but yet those
    same rows appear in the result set when validating the query in the query builder.
    Here's the result set as it appears in query builder:
    ...and here are the results of the actual report:
    As you can see, 3M and Angie's popcorn are not returned in the report. I have no filters defined on the report at all.
    This appears to be happening with other result sets for the same report.
    No idea why the results are accurate in query builder and then off in the actual report.
    Any help would be appreciated!
    A. M. Robinson

    Hi A. M. Robinson,
    The issue may be caused by the data cache. When we preview a report, the report processor runs all the queries for datasets in the report using the current parameter defaults, and saves the results as a local data cache (.rdl.data) file. We can continue
    to design our report without incurring the overhead of retrieving this data again if we make no changes to either the report dataset queries or the report parameters. Please to delete the cache (.rdl.data) file try to solve the issue.
    Reference: http://technet.microsoft.com/en-us/library/ms157366.aspx
    Alternative, you can create a similar report to check if the issue is persist.
    If the issue is persist, could you please post more detail information about your report design?  It is benefit for us to do further analysis.
    Regards,
    Alisa Tang
    If you have any feedback on our support, please click
    here.
    Alisa Tang
    TechNet Community Support

  • Query Builder access for end users

    Hi,
    I have a group of users who would like to have 'Query Builder' access.
    Is it possible to directly access query builder without actually login-in into application builder.
    Thanks in advance
    Aali

    No, but you could build a form to mimic it... Check out this thread from a few days ago: Query Builder functionality
    Thank you,
    Tony Miller
    Webster, TX
    On the road of life...There are 'windshields', and there are 'bugs'
    (splat!)
    "Squeegees Wanted"
    If this question is answered, please mark the thread as closed and assign points where earned..

  • Query Builder: Search for column

    The feature to dynamically expand/shrink the table list as I type stuff in the search box is great.
    But some of my tables have over 100 columns, I want to display all the tables/views having "ACCNT" in the columnname.
    How can I do that?
    Thanks

    Hello,
    In the Query Builder you can't but that sounds like a very good enhancment. Please idrop it in the 2.0 bug/wishlist app and we'll see if we can get it into a future version.
    Carl

  • Content Search Query Builder - filtering for custom column value

    I want to use a CSWP to display certain pages in a slideshow format on a site.  However, to filter them in a preferred manner, the pages library has a custom column "Spotlight" which is a Boolean type (e.g. yes/no).
    In my "Build Your Query" configuration page, I have added a keyword filter "SpotlightOWSBOOL=Yes" as the criteria to display my results.  This is not working, despite the fact that I currently have pages flagged as "Spotlight"
    in this library. 
    My question is - how can I achieve this result of displaying only pages with a custom column value "Spotlight" as "Yes"?

    Hi Owen,
    Could you capture a screenshot about your Crawled Property for your list column "Spotlight"?  Is it name "SpotlightOWSBOOL"?
    If your library column name is "Spotlight", you can create a custom
    Manged Property (e.g. create name as SpotlightMangedProperty)to map the
    Crawled Propery (e.g. may ows_spotlight, or ows_SpotlightOWSBOOL?) genegrated by list column "Spotlight", then start a full crawl.
    Then you can add the keyword filter like below in "Build Your Query" dialog of CSWP web part, then check if the correct items are filtered.
    SpotlightMangedProperty:"yes"
    If the above value "yes" doesn't work, please also try
    SpotlightMangedProperty:"True", or try SpotlightMangedProperty:1
    More information about this topic you can read is below.
    https://technet.microsoft.com/en-us/library/jj219667.aspx#proc2
    https://msdn.microsoft.com/en-us/library/office/ee558911.aspx#kql_property_restriction_queries
    Thanks
    Daniel Yang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Results on query with filter, but zero results when filter removed

    I have been handed the below query and I may be missing something blindingly obvious here but if i run it i get no results
    SELECT lipqoh
    FROM f41021 a , f0006 b
              WHERE      b.mcmcu = a.limcu AND
                   b.mcstyl = 'W';
    if i add the filter a.liitm = 105900 like below data is returned (although the entries are 0 as expected at the moment, this is not always the case)
    SELECT lipqoh
    FROM f41021 a , f0006 b
              WHERE      b.mcmcu = a.limcu AND
                   b.mcstyl = 'W'
    a.liitm = 105900;
    the fields for each of the tables mentioned in the query have the following characteristics
    lipqoh Number NULLABLE
    mcmcu Char(12 BYTE) NOT NULLABLE
    mcstyl Char(2 BYTE) NULLABLE
    liitm Number NOT NULLABLE
    Any guidance would be greatly appreciated

    here is a small sample of the output from the query you provided, the explain plan for the query without additional filter does not mention an index just Partition List Table Access F41021 Full
    LIPQOH MC
    DUMP(B.MCSTYL)
    DUMP('W')
    MCMCU
    DUMP(B.MCMCU)
    DUMP(A.LIMCU)
    0 W
    Typ=96 Len=2: 87,32
    Typ=96 Len=1: 87
    CSW
    Typ=96 Len=12: 32,32,32,32,32,32,32,32,32,67,83,87
    Typ=96 Len=12: 32,32,32,32,32,32,32,32,32,67,83,87
    0 W
    Typ=96 Len=2: 87,32
    Typ=96 Len=1: 87
    CSW
    Typ=96 Len=12: 32,32,32,32,32,32,32,32,32,67,83,87
    Typ=96 Len=12: 32,32,32,32,32,32,32,32,32,67,83,87
    0 W
    Typ=96 Len=2: 87,32
    Typ=96 Len=1: 87
    SOL01
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,49
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,49
    0 W
    Typ=96 Len=2: 87,32
    Typ=96 Len=1: 87
    SOL01
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,49
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,49
    0 W
    Typ=96 Len=2: 87,32
    Typ=96 Len=1: 87
    SOL02
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,50
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,50
    0 W
    Typ=96 Len=2: 87,32
    Typ=96 Len=1: 87
    SOL05
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,53
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,53
    0 W
    Typ=96 Len=2: 87,32
    Typ=96 Len=1: 87
    SOL06
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,54
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,54
    0 W
    Typ=96 Len=2: 87,32
    Typ=96 Len=1: 87
    SOL08
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,56
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,56
    0 W
    Typ=96 Len=2: 87,32
    Typ=96 Len=1: 87
    SOL08
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,56
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,48,56
    0 W
    Typ=96 Len=2: 87,32
    Typ=96 Len=1: 87
    SOL22
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,50,50
    Typ=96 Len=12: 32,32,32,32,32,32,32,83,79,76,50,50

  • Overall result in Query designer displaying ' * ' for one kf when executing

    Hello
    I have a got a kf in which value ' * ' is getting displayed when i have done display overall results for one of my chars. Now what i am hoping is that this can be because there are too many records in the display and the total is too huge and that is the reason it is disaplying * in it. Please can somone guide me if there is some setting that can be done

    Hi Tom,
    This is because you have different unit or currency in the data record and you can not sum it if they are different unit/Currency therefore system is showing you *.
    You can try NODIM(KF) and see if it is adding or try currency or unit conversion at query level so that all records in the query have same unit/currency.
    Regards,
    Kams

  • Where can i download Form Builder and Query Builder Aplications for Windows2000

    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name
    - Filename
    - Date/Time
    - Browser + Version
    - O/S + Version
    - Error Msg

    Hello,
    I have uploaded it to skydrive now you can download it from link:
    https://skydrive.live.com/redir?resid=91B2967628CA8BF3!146&authkey=!AIsYtSxNMmvHGsw
    Let me know in case ay problem
    Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer
    Please feel free to unmark answer if does not resolves your problem.

  • Query Builder results seem to max out at 500 lines.  How to change?

    Hi all,
    Some of out Application Express users are using the Query Builder tool for ad-hoc reporting. The idea is to run the SQL to extract the data, then download to MS Excel. The Query Builder results seem to max out at 500 lines. I want to increase that value. I searched all Application Express forums for 'query builder output max 500' and then 'query builder output' and did not find the answer.
    How do I change the 500 line limit in Query Builder results?
    Thanks!
    Application Express 3.1.2.00.02
    Oracle 10g
    Standard PDF printing (not BI Publisher)

    Bryan,
    Here is a link to an HTML-DB studio application, that is a QBE "replacement" for the query tool in APEX development..
    http://htmldb.oracle.com/pls/otn/f?p=18326:7:1387557504245687::::P7_ID:1222
    It is for an older version of APEX, but you should be able to make it work for your needs..
    Thank you,
    Tony Miller
    Webster, TX

  • Query for recurring reports using Query Builder in Business objects

    1. How to count webi Recurring reports using query builder in business objects? (Need Query for this)
    2. How to count Crystal Recurring reports using query builder in business objects? (Need Query for this)
    I am able to get summerized recurring reports using Query Builder.
    For Example we have 343 reports which are under recurring (This includes both Webi Reports and Crystal Reports).
    we need to get individually how many webi reports are under Recurring and Crystal reports are under Recurring.

    1. How to count webi Recurring reports using query builder in business objects? (Need Query for this)
    2. How to count Crystal Recurring reports using query builder in business objects? (Need Query for this)
    I am able to get summerized recurring reports using Query Builder.
    For Example we have 343 reports which are under recurring (This includes both Webi Reports and Crystal Reports).
    we need to get individually how many webi reports are under Recurring and Crystal reports are under Recurring.

  • Document was not found in search results after full crawl run for a sharepoint web application.

    Hi
    in a sharepoint farm i started full crawl , and after when i search a document with its name its was not display in search results.
    how to trace this issue
    adil

    HI
    i started full crawl for content source and 
    when i search a document  with s it s documentid :
    the document was found,
    but when i search same document with its name it was not found.
    the documents those not found with its name was last month documents  only and before
    that old documents was found in search results when i search with its name value.
    - the last month we moved the content database storage to new location 
    -  i stopped all sharepoint services including search (stopped crawling ) and started again when storage
    migration completed
    adil

  • Doubts about Query Builder tool

    Hi!
    We are using database link and the developed querys have many schemas.
    There is possible to use the Query Builder tool for multi Database schemas? How to do?
    There is possible to create query in Query Builder tool using database link? How to do?
    I would like to know about Query Builder tool in the our activies.
    *If there is more information about it(Query Builder tool) or documentations, please talk to me.
    Best Regards,
    Priscila Britto

    hi.
    try this [http://sourceforge.net/projects/sqleonardo/|http://sourceforge.net/projects/sqleonardo/]
    maybe it can help you.

Maybe you are looking for