Retrieve xml file

Weblogic Portal 9.2
How to retrieve content of xml file on JSP file using Content managemnet API.
Please provide me Content managemnet tutorial for Weblogic Portal 9.2 please
Edited by: user11311969 on Sep 8, 2009 5:49 AM

This bea sample is better than a tutorial :)
http://cid-1bd02fe33f80b8ac.skydrive.live.com/browse.aspx/Public
Basically from the node, get the property , get the value as a BinaryValue and get an InputStream from it.(but this depends on SPI
OR you can use
INodeManager nodeManager =
ContentManagerFactory.getNodeManager();
InputStream is =nodeManager.getStream(new ContentContext(), node.getId(), "binaryvalue");
should work..
i assume you want to get the XML for further processing . (otherwise there is a show binary servlet you could use)
regards
deepak

Similar Messages

"Error retrieving xml file from database"

Hello All,
I have installed and configured planning with Shared services. While I try to create an instance in Configuration Utility by entering the Instance Name, Host Name, Port (8300) and Click "Next", I get this error -
*"System failure:Error retrieving xml file from database".*
My RDBMS is - SQL Server 2005
OS - Windows 2003 Server
I am unable to work on planning for few months due to this error.. I would sincerely appreciate if someone can provide me a solution for this..
Thanks much,
Varma.

Hi,
Ive seen this before.
If this is a new environment could you create a blank database and configure it as your System database? Then try again and you should be fine.
I think you may have some invalid entries in your sys database.
Seb
www.taysols.com.au

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AM

This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/

WRT54GX4 unable to retrieve XML files

I'm trying to retrieve XML files through a subversion network. When I try through the router WRT54GX4, I get a response that the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. I know it is not my service provider because if I connect to the service directly through my cable modem, I'm able to retrieve the files. I thought the problem was initially with the subversion network, however I ran into a similar problem in trying to download XML as part of the installation process to install the Android simulator. I have PPTP Pass through, IPSec Pass through and L2TP Pass through all enabled. Firewall protection is enabled, but I've tried the download with it disabled. Firmware version is 1.00.20. I've reset the router and started from scratch and nothing seems to work.
Any thoughts on what the problem could be?

Back again. I upgraded the firmware..now using 1.00.17 and reset the router back to the factory settings. I tried again and received the same message. Turns out the server I'm trying to access is actually hosted by a 3rd party. So I'm using VPN to tunnel into my work network, then I need to connect to go through a second VPN tunnel to get to this server. Therefore I believe that the router is unable to tunnel through to that section location. If I take the router out of the equation and connect to my modem then I can connect just fine.

How to retrieve xml file from BLOB and display on browser with css/xslt

Hi All,
I am new to xml. I am storing my xml file into BLOB in database. Now in my jsp page I want to retrieve this xml file from BLOB and display in HTML/CSS/XSLT form...
Pl. guide me.. any docs..?? Logic...??
Thanks in Advance.
Sandeep Oza

Hello Sandeep!
I'm not familiar with jsp but logic should be as follows:
-in jsp page instantiate XML parser
-load specified BLOB into parser
Now you may traverse the XML tree or you might load XSL file and use transform method to transform XML according to XSL file.
I have an example where I'm selecting XML straight from relational database and then transform it using XSL into appropriate HTML output, but it's written in PSP.
You can try http://www.w3schools.com/default.asp for basics on XML, CSS, XSL. It's easy to follow with good examples.
Regards!
miki

Sending and Retrieving XML files as soap attachments

How do I send an XML file as an attachment and then retrieve it as an XML file from soap attachment.
I am able to send it as an xml attachment but i cannot retrive it as an xml file.
Plz help me out in this regard.
Its kinda urgent...

How do I send an XML file as an attachment and then retrieve it as an XML file from soap attachment.
I am able to send it as an xml attachment but i cannot retrive it as an xml file.
Plz help me out in this regard.
Its kinda urgent...

How to retrieve elements from 3 different xml file in one url

Hi all,
Could anyone please let me how can we retrieve elements from 3 different xml file in one url?
i just can only do it with one file only, any help would very appreciate.
Thank in advance
Jim

Hi Philip
Thanks for replying me.
I tried on that way, In my mdx query i am using one slice attribute (i.e [Customer].[Gender].allmembers) in rows so getting error "The Hierarchy already appears in Axis1".
SELECT
{[Measures].[Internet Sales Amount] } ON 0,
NON EMPTY
{[Customer].[Gender].allmembers } ON 1 -- Used
FROM
[Adventure Works]
WHERE
[Customer].[Gender].&[M]
,[Product].[Size Range].[(All)]
,[Customer].[Country].[All Customers]
[Customer].[Gender].[All Customers]
,[Product].[Size Range].&[XL]
,[Customer].[Country].[All Customers]
[Customer].[Gender].[All Customers]
,[Product].[Size Range].[(All)]
,[Customer].[Country].&[Australia]
Can you provide alternate ways to get resolved.
Thanks in advance

How to retrieve data from xml file into obiee reports

Hi all,
I've got a situation here. A xml file is stored as blob in oracle database table. Now i need to retrieve data/info from that xml file into obiee reports. How am i supposed to proceed with this ?

I will go for a table function:
http://gerardnico.com/wiki/database/oracle/table_function
In two words, you can create a function that behave as a table. Then you create a function to pick up your xml, you parse it and you send back the rows.
I know that Oracle has also a library for XML files but I never use it until now.
Success
Nico

How to retrieve image from XML file

Hi All,
I am new to XML. So any best guidance is appreciated.
The application requirement is to display image retrived from uploaded xml file in file upload section of our application. And store that image in database.
In my XML file , images & strings & numbers & booleans are there . I am able to save everything in database except images .
I am using JSF, Seam & Hibernate combination. In my Hibernate entity class i took BLOB datatype for image.
I am using following tags in my Xhtml file to display image
<s:graphicImage value="#{hibernateentitybean.picBlobtype}" height="200" width="200">
<s:transformImageSize width="200" height="200" />
<s:transformImageType contentType="image/jpeg"/>
But image is not displayed in Xhtml file
I am using org.w3c.dom.Document for retrieving node name & corresponding value in that node in XML file.
I am getting code like below for Image when i am logging all values from XML files in my bean class .
x0lGQRQAAAABAAAAAAAAAFJHAQARAAAAVwBhAHQAZQByACAAbABpAGwAaQBlAHMALgBqAHAAZwAAAP/Y/+AAEEpGSUYAAQIBAGAAYAAA/+0YLl
I want to convert this value to image. So i can convert image to bytes and store in BLOB.
Can anyone guide me ? or any other approach .
Thanks in advance for any reply.
Regards,
Naresh

Dan_Koldyr wrote:
agree, it's really odd. Just reread OP and it says:
NareshDharmiVatsal wrote:
want to convert this value to image. In any case it doesn't get worth then another single code line:
final String cdata = "x0lGQRQAAAABAAAAAAAAAFJHAQARAAAAVwBhAHQAZQByACAAbABpAGwAaQBlAHMALgBqAHAAZwAAAP/Y/+AAEEpGSUYAAQIBAGAAYAAA/+0YLl";
final sun.misc.BASE64Decoder decoder = new sun.misc.BASE64Decoder();
final byte[] data = decoder.decodeBuffer(cdata);
Blob blob = new SerialBlob(data);//or what ever other DB-specific blob implementaiton Did i answered original question? Any more comments to my first replay?I can comment on this latest code. The package sun.misc is private to Sun (Oracle now of course). It is undocumented and may change or be removed altogether in a future release. There is a good free open source Base64 decoder in the Jakarta Commons Codec library.

How to retrieve value from xml file

hi all,
can somebody pls tell me how to retrieve value from xml file using SAXParser.
I want to retrieve value of only one tag and have to perform some validation with that value.
it's urgent .
pls help me out
thnx in adv.
ritu

hi shanu,
the pbm is solved, now i m able to access XXX no. in action class & i m able to validate it. The only thing which i want to know is it ok to declare static ArrayList as i have done in this code. i mean will it affect the performance or functionality of the system.
pls have a look at the following code snippet.
public class XMLValidator {
static ArrayList strXXX = new ArrayList();
public void validate(){
factory.setValidating(true);
parser = factory.newSAXParser();
//all factory code is here only
parser.parse(xmlURI, new XMLErrorHandler());
public void setXXX(String pstrXXX){
strUpn.add(pstrXXX);
public ArrayList getXXX(){
return strXXX;
class XMLErrorHandler extends DefaultHandler {
String tagName = "";
String tagValue = "";
String applicationRefNo = "";
String XXXValue ="";
String XXXNo = "";
XMLValidator objXmlValidator = new XMLValidator();
public void startElement(String uri, String name, String qName, Attributes atts) {
tagName = qName;
public void characters(char ch[], int start, int length) {
if ("Reference".equals(tagName)) {
tagValue = new String(ch, start, length).trim();
if (tagValue.length() > 0) {
RefNo = new String(ch, start, length);
if ("XXX".equals(tagName)) {
XXXValue = new String(ch, start, length).trim();
if (XXXValue.length() > 0) {
XXXNo = new String(ch, start, length);
public void endElement(String uri, String localName, String qName) throws SAXException {
if(qName.equalsIgnoreCase("XXX")) {
objXmlValidator.setXXX(XXXNo);
thnx & Regards,
ritu

Simple XML file storage/retrieval

I am trying to store an XML file into a CLOB. I am having trouble "seeing" the data. I have examples of dealing with pulling BLOBs (pics), but not CLOBs. I don't necessarily need to use a CLOB (I don't think), since all I need to do is store an XML file and then later get it back (i.e. no operations on it). If anyone has any ideas/exp with this, please let me know.
Thanks, A. Morris

By "seeing" I was meaning during a SQL*Plus session. Setting LONG worked... Also I wanted to retrieve the clob data from a Pro*C exe. This was more involved and the DBMS_LOB stuff worked really well! I really appreciate your help.
Adam Morris
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Sandeepan ([email protected]):
In some cases, if the CLOB is too long, you may have to set LONG xxxx (a big enough value) in SQL*Plus to see the entire clob. You can also use the DBMS_LOB routines to read and print the clob. Please take a look at the App Dev guide for LOBs for more detail. If that doesn't suffice, please post details of what problem you encounter 'seeing ' the CLOB.
Thanks!
Originally posted by amorris:[b]I am trying to store an XML file into a CLOB. I am having trouble "seeing" the data. I have examples of dealing with pulling BLOBs (pics), but not CLOBs. I don't necessarily need to use a CLOB (I don't think), since all I need to do is store an XML file and then later get it back (i.e. no operations on it). If anyone has any ideas/exp with this, please let me know.
Thanks, A. Morris<HR></BLOCKQUOTE>
null

Repeated retrieval and parsing of XML file causes IE to display an error message

I have a flash application that makes a HTTP call every 120
seconds to retrieve a xml file. This file is being generated with
fresh data every few minutes or so and pushed to the apache web
root with a unix mv command.
I'm using the standard Flash XML object. The HTTP request is
NOT over SSL (I know there is a bug related to this). Here is the
code to make the retrieval:
xmlData = null;
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = xmlTraverse;
xmlData.load("
http://domain/dir/somefile.xml");
The "xmlTraverse" method was written by my team. There is no
known bug in the parsing logic.
Intermittently and unpredictably, IE will display the
following dialogue box:
"A script in this movie is causing Macromedia Flash Player 8
to run slowly. If it continues to run, your computer may become
unresponive. Do you want to abort the script?"
I originally leaned toward an infinite loop causing this
problem. The timeline jumps back and forth between two frames,
checking in the latter frame if the xml has been loaded and parsed
before allowing execution to move to the next frame. I hardcoded
the loop check to always be false, but this did not produce the
message above (although it pegged my CPU).
The only scenario where I've managed to reproduce the message
above is by making a huge (50 MB) xml file. This consistently
produces the message. But I don't realistically see how our xml
file could ever be over 1 MB.
First, can anyone cite another cause for this message? I'm
starting to lean towards the issue lying in our parsing logic such
as infinite recursion on a badly formed XML file. Second, does
anyone know of a solid xml SAX parsing actionscript utility where
you can assign callbacks to XML nodes? If the problem is in the
parsing, we may have to replace our homegrown solution with
something more robust and proven.

Is it a recursive parsing function? I'm not sure about this,
but I think this message pops up when there are more than 256
iterations in a loop (I've read something about this 256 limit,
that will end while loops if they exceed this, but with another
error message... but again, I'm not totally sure about that).
The message is typically for loops, but I don't know when it
fires. Sometimes it appears for really 'small' loops when you're
using the debugger (e.g. a for loop with 100 iterations), so maybe
it is connected to the time a loop is running. You could place some
trace statements in the xmlTraverse method, to see where the
function was when the message occurs, or take the time the function
needs and check if this might be related to the error.
That's all I can come up with, guess there are people here
with more insight to this...
cheers,
blemmo

Retrieve XML,store as a file, update data in XML and insert back. Possible?

Hello,
I have XML records stored in the DB. Now I want to retrieve XML as a file to my local system, edit the data values for some element nodes, child nodes and re-insert that xml in its earlier place..
Is this possible?
If yes, can u pls tell me how to do it.
I tried using WebDAV, but I guess its not working in my machine.
Also, I dont want to update the xml record directly using UPDATE command. I want to retrieve as a file, store in a local system, and then update that entry in the DB.
Thanks in advance, and your help is appreciated.
Regards,
Athar

Which database version are you using
What is the output of lsnrctl status
The easiest way to do this will be use WebDAV or FTP. However if not getting the data out as a file will require some coding work. Getting it back is fairly easy, use a bfile

Error in retrieving and parsing XML File

Hi Folks
I am Working on People centric user interface, While i am custimizing a application in Business application Builder i am getting this error
" Error in retrieving and parsing XML File "
can any body look on this and give me the solution
it will be rewarded
Regards
M.S.Kumar

Hello,
As mentionned by SAP_TECH, avoid to use the BAB.
Go to CRMC_BLUEPRINT_C and use the different option in the menu to customize the field group, toolbar group, events, ...
Use the PCUI cookbook to find your way.
Regards,
Fred

Retrieve xml file

Similar Messages

Maybe you are looking for