Retrive Business Partners related to the filters of an Attribute set

Hi SAP Gurus,
I hv a requirement to get Business Partners related to the filters of an Attribute set.
I hv used a FM 'CRM_MKTTG_SAL_SEARCH_DB' to get the GUID of the attribute list.
If the GUID is passed to another FM 'CRM_MKTTG_SAL_READ' we can get the details of the attribute list i.e. GUIDs of Attributes and Filters within the list.
All we need to o now is to identify the BPs related to the filter criteria.
So, is there any standard report program or Function Module which can be used to achieve the above purpose?

Thanks for the reply.
this FM is taking the Marketing Attribute Set ID as input and returning the BPs in it.
I would like to know if I create an Attribute list in the T-code CRMD_MKTDS, create a filter criteria for this attribute list, then how come I can determine the BPs related to this filter criteria Can this me achieved by any FM or Standard Report program?
Edited by: Sibsankar on Oct 4, 2011 3:32 PM

Similar Messages

Contract Account for the business partners

Hello Experts,
Once the certificate expires the program must find all the contract accounts for the business partners and change the account determination ID field on the CA to be taxable. I already did the code to verify if the certificate is expire but I don't know where to look for all the contract accounts of a business partner and not sure which field to change to make a contract account taxable I think is KOFIX_SD, any help will be really appreciated, thanks in advance.

Hi,
Based on the Partner you can get the contract account data from FKKVKP and FKKVK table.
Hope it helps you.
Regards,
Vamsee

Not able to select Business Partners in Document Generation Wizard

Hi
While i was trying to generate a consolidated A/R Invoice from deliveries in the step where i have select the business partners,some of the business partners are not in the selection list.These business partner's currency are defined as multicurrency.How to solve this issue.Since i want to generate documents for this business partners?

Hi,
In Document Generation Wizard,
Step 1 : You will create new Parameter set or select the existing
             parameter set.
Step 2 : You will be selecting the target Document and other relevant
             datas selection such as Posting date, Document date, Series
             etc.,
Step 3 : You will select the Document Types which are to be
             considered to generate the target Document. and Posting
             Date and Document Date.And you select the in which order
             the Document wizard to be sorted in Sort By selection.
Step 4 : In this step you will be choosing the Consolidated by or No
             consolidation. If you choose Consolidate by, then we choose
             whether it should be consolidated by Ship- to - Address
              and/or Payment Terms and/or Payment method.
Step 5 : Now you must select the Business partner range in selection
            critieria and Customer group in it. If the data already exists in
            the table then clear it and select the business partner freshly.
Step 6 :You will be selecting the messages and alerts
Step 7 :You must save and execute the document wizard.
I hope this will help you.
Regards
Raja.S

Error adding new business partners

Hi all,
When we try to add new business partners, we get the system error message stating "Accounts receivable/payable is missing [Business Partner - Accounts Receivable/Payable] [Message 3502-14]. This is a bit of a worry as it does note happen in the test database, and this occurs with every account that tries to carry the action out. Anyone got any ideas?
Cheers,
Nick Reese

Hi Nick,
the application is telling you that one of the mandatory control accounts is not pre-defined under Administration -> Set-up -> Financial -> GL account deteremination -> Purchasing -> General tab.
Not all localisations come with all default GL accounts pre-determined & the company accountant should either enter their preferred default accounts in the GL account determination or manually enter it/them in the individual BP master record. The system will not allow addition of a BP is the mandatory accounts are not defined & return with the error message you experience.
Therefore, either enter all accounts in the GL account determination, or, while you're creating the new BP, go to the tab 'accounting' -> tab 'general' & enter the accounts payable account. Click on the button with the 3 dots toalso define the DP receivables & open debts accounts if necessary.
It happens quite often that an accountant pre-defines the most common control accounts, but leaves the more rarely used ones blank, such as the EU Accounts payable, for example. So if you create an EU vendor & don't enter the account manually, the error message is triggered.
All the best,
Kerstin

Business Partners and Sales Document

Hi experts, I have a quistion for you all. Consider the following scenario: I have one opportunity with multiple sales team members assigned to it as well as multiple competitors. Can I view this information in BW a BW report, e.g. per Opportunity, show me all Sales Team members or all competitors? If so, can I leverage existing PSA's and ODS's? Thanks in advance for your replies, Tiest.

Arun, I am not a BW expert at all but I have various one-to-many relationships on the Opportunity header and it's assigned business partners. Using the standard reporting I should be able to see all Sales Team Members, Competitors or whatever BP Roles I am assigning? Thanks again for your time and knowledge, Tiest.

Text determination for business partneres

Hi
can any one provided me step by step process of text determination for business partner level
Many thanks
vinay

Hi Vinay
First U need to Define the Text Type for the Text determination for Business Partners.
Follow the Below Path
1)Img-Crm Basicfunctions-Textmanagment-Define Text objects and text types-
select text Object but000 and click on create- Give text id and description and save the text type
2)then u have to add the text type to the procedure
Define text determination procedure --select the text object but000 click on procedure and click on definition of procedure- go to new entries and add ur new type and save. ur text type will be reflected in the business partner.

Generate match terms for old business partners

Hi All ,
We are in the process of generating match terms for old business partner which is already exisiting in the system?
after uploading SPL master .
We need to genrate all the match terms accordingly based on SPL master
can any body give me the steps involved
Thanks and Regards
S.Janagar

Hi,
to generate search terms, as well for new as for old business partners, please follow the steps:
/SAPSLL/SPL_CUS_APP_BUFF_RESET
/SAPSLL/SPL_CREATE_SEARCHTERMS
/SAPSLL/SPL_INDEX_CREATE
/SAPSLL/SPL_CREATE_SEARCHTADRC
Please perform them in this sequence.
Best regards, Christin

How to add new marketing attribute to the existing marketing attribute set?

Hi all,
I searched for existing forums but I didn't find the required one. I found some using Tcodes ,which is not my requirement. My requirement is to add new marketing attribute to the already existing marketing attribute set. This attribute set is created by my team lead with 4 attributes but now i have to add new attribute to this set so total will become 5 attributes for this attribute set. This has to be done through marketing professional business role. If this is not done through marketing attribute set, then I will go for the transaction where I can add marketing attribute for attribute set.
Please send the details of both marketing professional business role and transaction code.
Your help is highly appreciated.
Thanks,
Baasanthi.

Hi,
SAP CRM Marketing Attributes explained
Path to create Marketing attributes from webui: log in with Marketing Pro role->Marketing->Create->Marketing Attribute
Regards,Sumeet

The order in attribute set is MESSED UP

Hello forum,
Here is an intricate description of my problem:
When I define BRIDGE_TYPE attribute set for Discoverer the sequence of attributes often changes in attribute set without my intervention. This is especially the problem because advanced attribute properties themselves DO NOT change the order. Consequently, I am getting completely messed up. I cannot identify any possible pattern here. I observe it for both dimensions and facts attribute sets.
What's wrong?
Sorry for very vague description of the problem, but that's how it's going on!!!
Another problem is sometimes on the Attribute Sets tab the button "Advanced..." is grayed out for BRIDGE_TYPE. When I move focus to the only one attribute set (BRIDGE_TYPE) and not changing anything press ok (or in some other way move out focus from the record about BRIDGE_TYPE attribute set), I get error message that only one attribute set of type BRIDGE_TYPE may exist. After I press ok for this message, the type of attribute set is automatically changed to USER_DEFINED (of course Advanced button is still grayed out). Then I press ok and open Table Properties again. There I can see two identical attribute sets but with different types: BRIDGE_TYPE and USER_DEFINED. The names of attribute sets are the same, so I have to change name of one attribute set or delete them. If I delete them and create new attribute set of type BRIDGE_TYPE, I am able to go to advanced properties and everything fine, except order problem described above. Again I cannot see any pattern here - this happened only with some of dimensions.
Does anybody observe such a strange behavior? I'm lost and disappointed. :(
Regards,
Alex

I have found a solution for ordering problem but it's realy error-prone. :(
I have determined that order is changed only when I change advanced properties for BRIDGE_TYPE attribute set. If I change them again, the order is back to the previous state, so I can handle it with some efforts. Of course, this is not good way of doing thing, but I don't know better way to handle this.
This trick really slows the work down! If someone experienced similar results, please, share your knowledge.
Regards,
Alex

Users changes the address of Business Partners

Hi Everyone,
We are using SAP Business One 2007A. We have different locations set up for "ship to address" in business partners master data and all the ship to address have been saved as unique locations so that when a sales order or a work order is created, the location address is automatically populated on choosing the location of ship to address from the drop down menu
What many users are doing: When creating work orders, they input the business partner code, choose the location and then change the ship to address to whatever they want. This creates problems when converting the work orders to delivery. I want to restrict the capability of changing the ship to address while creating work orders and sales orders. How do I do it? Do I have to do it in business partner master data or in work orders or is it some kind of user authorization that I am missing.
Please let me know.
Thank you.

Hi,
I checked the links sent by you. It says Open SQL> Click on + of data base> Programability> Stored Procedures> SP Transaction notification and paste the code where you see" ADD YOUR CODE HERE" and click o execute or press F5.
In Business One 2007A, I do not see anything like SQL, +of database, programmability etc. I only see the following in Business one. Tools-->Queries and I see a lot of options for Queries named Query Manager, Query Generator, Query Wizard, Query Print Layout, User Queries, System Queries etc. Which one do I use?
Also, where do I get the SP code to execute?

Limit the number of Business Partner relations in BP Master data

Hello Gurus,
I have a requirement where I have to limit the number of business partner relations to 2 at BP Master Data.For example for a BP X, there cant be more than 2 contact persons. So in the relationship tab they should not be able to add more than 2 contact persons. I know we can do this partner processing in sales transactions, but not sure we can implement the same in BP Master Data.
Thanks a Lot in advance for your replies,
Krishna.

Hi,
You can achieve this by customizing. Go to Transaction BUBA. Double click on you relationship category. Now change the cardinality. In your case it will be 0:2 .
This will solve your problem.
Thanks and warm regards,
Smita.

Count the number of business partners on a non-cumulative key figure

Dear experts,
I have a problem. We have an InfoCube in BW in which the Activity Journals are loaded every day. In this Activity Journals it is registered that a Material was listed (available) at a customer (value 0 or 1).
We have a non-cumulative key figure MXW_LISTN with inflow (MXW_LISTI) and outflow (MXW_LISTO). In time this key figure receives +1 or -1 for a customer, material combination.
I want to use MXW_LISTN in the query in a specific way. The key figure on itselve tells me how many listings there are. However, I want to know how many business partners there are with a listing.
I was thinking about an exception aggregation on MXW_LISTN with reference characteristic 0BPARTNER and "Count <> 0". BW however refuses to do so and only lets me do simple aggregations such as AVG, MIN, MAX etc.
Can you think with me and come with an proper solution to count the number of business partners with a listing?
Your help is very much appreciated and rewarded!
Best regards, Hans de Klein

Would anything with virtual key figures be a solution? Please help me out!
Best regards, Hans de Klein

So Can I determine the business partners linked to user based on the assigned role and org. structure?

Hello, I am working on a SAP CRM 7 Sales implementation and we are implementing leads and opportunity scenarios. The current business organization model is that there multiple vertical and horizontal departments. This is typical matrix structure. This organization has done the segregation of its clients based on the verticals so every clients belongs to at least one or more Vertical department but Horizontal departments can contact all the clients. In the same way sales executives are also either belonging to one or more Verticals or Horizontal departments? Horizontal sales executive can create leads for any clients available in the system but a Vertical sales executive can only create lead only for the client belongs to his vertical and assigned to him. This can be achieved by creating organization structure and business partner relationship.
Now the problem statement is that few sales executives need work for both some Verticals and Horizontals at the same time. But requirement is that they should be able to do the both roles with single user id but multiple roles. So when sales executive is creating leads his vertical department, he should only be able to select clients assigned to his Vertical only but when he is creating lead for Horizontal department, he should be able to select any clients.
So Can I determine the business partners linked to user based on the assigned role and org. structure?
Please let me know if this is not clear also note we are only using CRM WebUI no SAP ePortal.
Thanks a lot your help in advance.
Regards
Sudesh Sharma

Thanks, Tahir
my problem has solved
Kind Regards,
Faisal

What is the best solution to create the business partners in CRM?

Hi all,
I need to migrate the business partners (general data, address, marketing attributes ) in CRM from an excel file
What is the best solution to create the business partners with these informations?
I tried LSMW but to enter the SALES and MARKETING atributes in BP i have to "click" on the attribute and not realized by the record.
Thanks in advance
best regard
miguel

Hi Miguel,
   Always preferred to use XIF Function Modules to create Business Partners and Relationships.
   CRMXIF_PARTNER_SAVE
   CRMXIF_PARTNER_REL_SAVE
   Using this function modules you can populate all most all fields in BP including Z fields(If it created through EEWB), except Marketing Attributes.
   For marketing attributes try to use FM CRM_MKTBP_CREATE_LIST_BPS_OB.
   Have a look at the notes 609236, 1081545 and 1239018. This will give you some idea, how to upload and update marketing attributes.
//PBP

Problem updating business partners - "Bank does not exist in the company"

Hi
I have written a small program to update business partners ( SP01 PL 34 ) and I am getting a message saying "Bank does not exist in the company"
I am only updating simple information such as telephone, fax and email addresses.
Does anyone know why I am getting that error ?
Thanks
Regards Andy

Paul,
Other than the code that you have written, are there any other add-ons installed with Business One such as the Payment Engine?
I have not heard of this issue. You may want to create a message with SAP Support since you are getting the same error through the DTW which also uses the DI API.
Also, is there any difference between what you manually key in and what you try to push in?
Eddy

Retrive Business Partners related to the filters of an Attribute set

Similar Messages

Maybe you are looking for