"Retro Pay by Element" for Saudi Localisation

Fellow boarders,
1. I am trying to run "Retro Pay by Element" for saudi localisation.
2. While trying to define reto-pay elements, the button "retro components" is greyed out (Elements>Processing>Recalculation Tab)
3. As per metalink note 743215.1, i try to run conc program "Generic Upgrade Mechanism" to enable the Retro Components Button In Recalculation Tab
however this program does not pick up any parameters from the list.
4, when I run the query
select * from pay_legislation_rules where
rule_type like '%RETRO%';
it shows me the data for Us, Canada & mexico only.
Does that mean that retro-Pay is not enabled for any other legislation other than these 3 countries ...?
If no, then how do I configure retro-pay for saudi localisation.
Any help/suggestions would be greatly appreciated.
Cheers
Shah Alam

The "Retro Components" button on the Element screen would be enabled only if the "Enhanced Retropay" is enabled. Considering the fact that the Recalculation Tab is enabled (As you can go to the Tab where Retro Components button is present), you can use the Retropay by Element solution by attaching the Retro Element to the element.

Similar Messages

Retro Pay by Element

Hello Experts
Please let me know the setup for Retro Pay by elements.
Thanks
Syed.
Edited by: Syed on 10 May, 2012 1:52 AM

Check this http://oracle.anilpassi.com/retropay-enhanced-setups-2.html
Thanks

Retro Pay

Assume an employee gets paid 1,500 for August.
Now payroll comes to know that his salary is actually 2,000 and not 1,500.
The following are the steps required to be performed.
1. Define a new element which can be used to pay the Retro amount
2. Make sure that this element is Non-recurring and Multiple Entries allowed.
3. Attach this Element to the retro tab of the Salary element
4. Define the Assignment Set - An assignment set needs to be defined with the affected Employees
5. Element Set - define with the Salary element (Don't include the Retro Element. Error while submitting the Concurrent Request) .
6. Now run the Process Retro Pay by Element with the following parameters
a. Effective Start Date: This is the date from which we want to compute the difference
b. Effective End Date: A date in the latest Pay Period. The retro entries get created in this period.
c. Assignment Set: The Assignment Set we created
d. Element Set: The element set we created
e. Submit the request.
Question that where we have to define the changed amount on retro element or the main salary element and what amount only difference or complete 2000 have to put into input value of retro.. ?

Hi,
The steps you have given are the setup steps needed for Retropay process to work. Once the setup is done it will process the previous pay periods based on the input parameters to the process and generate the retro element entries for the assignments.
The change in amount should be updated for the employee in the element entry screen with a correct effective start date before running the retropay process.
Thanks & Regards,
supriya

Enhance Retro Pay for Global Legislation?

Hi,
Is 'Enhance Retro pay' process available fro Global legislation if yes then how to configure it.
Regards
Majid

Yes, it is. Check -
What Localizations Support 'Retropay By Element' and Retropay Enhanced [ID 1118267.1]
And check these Notes on the setup -
Oracle Payroll RetroPay Enhanced - A Functional Whitepaper [ID 1484339.1]
Enhanced RetroPay [ID 373148.1]
Also -
http://oracle.anilpassi.com/retropay-enhanced-setups-2.html
Cheers,
Vignesh

How to get retro pay in payroll

How to get retro pay in bw.

I have the same issue. payslip shows the retro amounts correctly, but i can't figure out how to get the right amount using the data found in the RT table..
one thing i got is, when all retro amounts are added up, less the deductions and adjustment in retro the value is equal to that from wage type /552.. but i can't figure out how to get the breakdown using RT data..
retro amounts have the letter "R" before each wage type.
edit:
i found this program RPCLGA00.. it shows the right values/amount for each wage type, including retro.. but i am still unable to figure out how i can arrive at the same values using RT data.. can someone help me understand the program?
Edited by: Janus Arcellana on Jan 12, 2009 11:23 AM

What is best for me. I have been using Elements for many years (since Elements 2) and now want to but either 13 or Lightroom. Can anyone help me decide

I have been using Elements for many years (since elements 2) and now want to upgrade. I am reasonably old and at this stage do not understand Creative Cloud. Am I best to upgrade to Elements 13 or try Light room 5?

Do you want to make a one time purchase (Photoshop Elements) or pay monthly rent ($9.99 per month for Photoshop and Lightroom)
Do be aware that the subscription model is just like rent... stop paying and the programs stop working... but you get the full Photoshop

Impact of Installing legislations for Saudi Arabia and UAE

Hi ,
We are currently on R12.1.3 with the following installed legislations
Installed legislations
(Code)                        Application
GB                            Payroll
GB                            PQP
GB                            Human Resources
KW                            Payroll
KW                            Human Resources
Global                        Human Resources
We have separate payroll for UAE ,Kuwait and Saudi Arabia
I would like to know if there will be any impact if Saudi Arabia/UAE legislation is installed in our current application

Hi Vignesh,
View objects do you mean standard objects relevant to the particular business group ?
we have separate elements for each payroll and the payrolls are linked to the relevant responsiblity.if we create separate Business group then we have to move all the employees and the elements to the particular business group right ?
if we install the legislations for Saudi arabia and UAE and the legislation defined in business group info is kuwait then the standard features applicable for each
legislation like GOSI monthly reports will it be available ?

I ordered and payed photoshop elements 11 on september 27 2012, but i have not yet received it

I ordered an payed photoshop elements 11 on september 27 2012 but I have not yet received the program. My name is : Luigi Nicotra and my internet address is: [email protected] ; the number of the order is: AD003593422IT

This is the link for support page:
http://www.adobe.com/support/download-install/supportinfo/

Is there any Subscription for saudi arabia ??

Hello All ,
i'm from saudi arabia
and i make calling every day to my friends mobile !
but the rate too high !
i want to Subscription for a month if any for a month unlimitid calls mobile in saudi arabia
is any Subscription for us to saudi arabia ??

hassanalameen wrote:
is any Subscription for saudi arabia ??
http://www.skype.com/intl/en-us/prices/pay-monthly/#SA
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Rertro Pay by Element

I want to use retro pay setup how I can prevent not include the old change of date tracked in retropay now retro pay work start from today

Hi,
RetroPay by Element will not pick all the changes. First you check whether your Localization can avail this process.
Refer : What Localizations support RetroPay by Element and RetroPay Enhanced (Article 1118267.1)
If you have this process available then go and setup Retropay by Element, refer : Retropay By Element (Article ID:232571.1).
Hope this helps.
Regards,
Siva

Fetch Top level WBS elements for delivery type LP

Hi everyone,
we are working on a delivery analysis report and we are in progress of fetching sales order number for deliveries with delivery type LP.
How we are doing?
so we are fetch the UP values from PRHI table for the wbs elements in LIPS.
Now we need to fetching the top level wbs elements from PRHI table by passing the UP values to the same table until the UP field value becomes initial.
Then fetching the corresponding sales orders from the VMPA table for the wbs elements from PRHI table for the value of corresponding UP field is initial.
So it is going through so many iteration to fetch the UP value again and again until it is initial.
What we need?
So if someone can suggest a FM or method to fetch the top level WBS element for the given WBS element from LIPS table will be of great help.

Hi,
Try FM
'BBP_PS_PROJECT_GET_LIST
'BAPI_PROJECT_GETINFO

Two Cost Element for the same GL

Hi,
We have 2 Company Codes - 1000 & 2000. We are using same CoA in both the Company Codes. We have a GL, say 12345678 for posting short/excess amount. So during MIRO, the accounting entry would be:
GR/IR a/c dr.          10,000
GL 12345678                  2
                   Vendor            10,002
GL 12345678 would be dr or Cr would depend on short/excess amount.
We have created Cost Element for this GL 12345678. If I post the MIRO without attaching a Cost Center to this Cost Element system thows an error to attach the Cost Center. I have separate Cost Center for Company Codes 1000 & 2000 however I can only put one Cost Center in this Cost Element.
Can anyone advice how can I post the above mentioned entry with different Cost Center. This line item (GL 12345678) is generated automatically and the Cost Center field is greyed out hence I don't have option to enter the Cost Center during MIRO. I checked the FSG of this GL, Cost Center field is 'Optional' over there.
Thanks,
Sandy

Solution Option* -You can assign Differant Cost Centers to Company Code 1000 and Company Code 2000 in OKB9 Transaction Code.Follow the below process....
--- Go to OKB9
--- Select New Entries button
--- Give the Company Code 1000 in first row and 2000 in 2nd row
--- Enter the Cost element 12345678 for company code 1000 and 2000
--- Enter the relevent cost centers for company code 1000 and 2000
--- Select Save
Thanks
Fit 4 Nothing

I bought my software pack iWork 2008 at the apple retail store and I cannot get any updates and apple App Store won't help me. Does any one know how I can get the upgrade without paying full price for a second time? I paid $99 for the iWork family pcan'

I cannot believe that apple is refusing to help a customer who bought and paid for iWork software just because I bought it from the retail store the App Store says they cannot allow me to upgrade. I have never heard of such. It should to matter where I got it i bought apples software and I don't et how the retail store can be different frothe App Store my god its all still apple. So stupid. I will not pay full price for the upgrade. Also I purchased Logic Studio and 2 days later the upgrade came out and they will not let u upgrade ? I think there should be at Least a 30-45 day window if u purchase software and they release the upgrade u should get not. It's not like apple doesn't make enough money already.

iWork '08 & 09 installed from the retail disk or from the downloaded trial must be updated through Software Update. Those installations will not be recognized as installed by the Mac App Store. In Mountain Lion Software Update has been "rolled into" the Mac App Store. Choose Software Update from the Apple menu just like you always have & the Mac App Store will launch. Depending on what you have that needs updating you may see two sections in the MAS window.
But, as always, if you're not running the latest versions of the iWork apps installed from a retail box or the downloaded trial & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. If you installed from the downloaded trial or the retail box, they must be in the iWork '08 folder in Applications. That iWork folder must be named iWork '08. If it doesn't have the '08 Software Update won't find them & the updaters won't work.
If you are running Pages 3.0.3, then you do have the latest version of Pages from iWork '08. If you want to upgrade to iWork '09, you will need to purchase the new version, just like everyone else. The good news is that you can buy just the individual iWork apps - Keynote, Pages & Numbers - that you need or want for $20 US each from the Mac App Store & then install them on as many Macs as you need using the same Apple ID.

How can I get a refund on my iCloud upgrade w/ out paying $ 19.95 for tech support?

How can I get a refund for an iCloud upgrade w/o paying $19.95 for tech support? Help plz!!!!!!

If you upgraded with the last 15 days, call the Apple online store at the number shown on the bottom of this page.

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

"Retro Pay by Element" for Saudi Localisation

Similar Messages

Maybe you are looking for