REUSE_ALV_GRID_DISPLAY (two settings for output display)

Hi all,
I am using REUSE_ALV_GRID_DISPLAY FM to display the contents of my internal table. I have about 53 columns to display.
I have two requirements.
1. After I display the list, I want to see the first 3 columns all the time when I scroll horizontally right.
2. Depending on the selection criteria the number of columns in which I have the data varies. Right now, for example, if the data is only till 40 columns, the last 10 columns would be empty. I was wondering if there is a way by which I dont see the columns which are empty after I display the list.
Looking forward for helpful answers. Please let me know if there is something not clear in what I have asked.
Thanks

Hi!
1. Here is an example:
DATA: lc_fieldcat TYPE slis_fieldcat_alv.
  CLEAR lc_fieldcat.
  DEFINE m_field.
    add 1 to lc_fieldcat-col_pos.
    lc_fieldcat-fieldname   = &1.
    lc_fieldcat-outputlen   = &2.
    lc_fieldcat-seltext_l   = &3.
    lc_fieldcat-do_sum      = &4.
    lc_fieldcat-inttype     = &5.
    lc_fieldcat-hotspot     = &6.
    lc_fieldcat-fix_column  = &7.
    lc_fieldcat-ddictxt     = 'L'.
    lc_fieldcat-no_zero     = 'X'.
    append lc_fieldcat to %fieldcat.
  END-OF-DEFINITION.
  m_field 'BLDAT' '8' 'Doc date'                  ''  ''  '' 'X'.
  m_field 'BUDAT' '8' 'Posting Date'              ''  ''  '' 'X'.
  m_field 'LIFNR' '10' 'Vendor Code'              ''  ''  '' 'X'.
  m_field 'NAME1' '35' 'Vendor Name'              ''  ''  '' 'X'.
  m_field 'XBLNR' '16' 'Reference'                ''  ''  '' ''.
  m_field 'BKTXT' '25' 'Header Text'              ''  ''  '' ''.
  m_field 'SGTXT' '50' 'Line Item Text'           ''  ''  '' ''.
  m_field 'S_DAT' '10' 'Start Date'               ''  ''  '' ''.
  m_field 'E_DAT' '10' 'End Date'                 ''  ''  '' ''.
  m_field 'DMBTR' '13' 'Amount in PHP'            'X'  ''  '' ''.
  m_field 'AMOUNT1' '13' '30 days and below'      'X'  ''  '' ''.
  m_field 'AMOUNT2' '13' '> 30 but < 60 days'     'X'  ''  '' ''.
  m_field 'AMOUNT3' '13' '> 60 but < 90 days'     'X'  ''  '' ''.
  m_field 'AMOUNT4' '13' '> 90 but < 120 days'    'X'  ''  '' ''.
  m_field 'AMOUNT5' '13' '> 180 days'             'X'  ''  '' ''.
Make sure its fix_column = 'X'.
Regards!

Similar Messages

  • For output display report is final_internal table or structure in wd ABAP?

    Hi all,
    for output display report is final_internal table or structure in wd ABAP?
    in wd java output display report -.> CALLING rfc and that RFC OUTPUT table
    finally in internal table is assigned to STRUCTURE .Same procdure?
    Thanks,
    RAMA

    Dear Madhu,
    thanks for guidence!
    its showing popup tht this BADI ( ME_CHANGE_OUTTAB_CUS ) is only use for "SAP Internal  use".
    Regards,
    Praphull

  • Message settings for Output determination.

    Hi,
    What does the message settings in output determination referst to.
    What are all the configurational steps involved in it.
    If possible please provide me the link to get more details on the above topic.
    Regards,
    RitiG

    Hi,
    Output determination is the way to explain how any output will go from SAP system.This output can go through..Printout, Fax,Email, ALE...etc.
    Please go through this BLOG, you will have a fair idea about process and configuration steps.
    <a href="http:///people/gajendra.bhakuni/blog/2007/03/13/message-control-output-control-for-ale Determination</a>
    Regards,
    Sachin

  • Best Export settings for computer/display playback

    Any one like to chat about and share their settings for exporting video from Final Cut (4.0 and others) to obtain the best/highest quality video for play back on their computer and for other digital LCDs and displays?
    Cheers,
    Dean

    Hi(Bonjour)!
    Export with Quicktime conversion to quicktime movie H.264 Codec for video, Apple lossless for audio, current frame size.
    Be prepare for a long conversion time. Computers used to view this file need quicktime to play the movie.
    Michel Boissonneault

  • Regarding the 'Dispatch time' settings for output type...

    Hi Experts,
    May i know what 'Send with application own transaction' means when we configuring output type in SPRO for 'Dispatch time'.
    Cause i knew if we set it as 'Send immediately', then this output type will be triggered upon saving the orders.
    But i dont know what that item for..Could you kindly help me on this...
    What it means if we set the dispatch time as 'Send with application own transaction' for delivery output..??
    Thank you very much.

    Hi,
    If you choose 'Send with application own transaction'  when maintaining condition record for output type,during order,delivery and invoice saving the output type signal is yellow,that means unless you select that output and trigerred for printing it will not goto the spool.i.e in simple words the output is for manual printing.......
    Let me know if you need any clarifications on this..
    Regards,
    Chandra

  • Optimum Settings for mini display to VGA

    I just got a mini display to VGA cord for my aluminum mac book and hooked it up to my 37" Vizio LCD HD tv and was wondering what the best settings would be to put it on as far as the resolution goes.

    ok and one other question, Is there a way to close the lid on my mac book and not have the display go away on my LCD tv? Because if i leave the lid open its fine but if i close it then the computer basically just goes to sleep.

  • Hello Guru's reg IMG settings for output det of PO External Send

    Hello Guru’s,
    While configuring output determination Medium for External Send  At Message Type Purchase order step in IMG Settings, I need to configure the following settings
    Program, routine, form
    I have Output type:  Neu ( for Purchase orders)
    Application: EF Purchase Order
    Medium----External Send
    Program:?????
    Routine:
    Form:
    What is the the program name, routine Name and Form, should I select from the drop down bar. There is no description for the SAP STD program for External Send mode will anyone guide me.
    Full points for the answer

    HI,
    You can get some idea by clicking this.
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/75/ee122c55
    c811d189900000e8322d00/frameset.htm
    regards

  • Change settings for external displays: no "mirror displays" mode

    Hello,
    I'm using a 13" MBP with Snow Leopard. I'm using different displays and projectors in different locations. When you plug an external display in, the two displays are first in "mirror displays" mode. First thing I do is to switch this off.
    Is there any way of changing the settings, so that an external display doesn't start in the synchronized mode??
    Thanks in advance.
    Message was edited by: robert170

    only if you plug in this projector again. If you plug in a new projector (which I often do) it allways starts in "mirrored" mode.
    I just found an app which - at least - makes the switching easier:
    http://www.fabiancanas.com/Projects/MirrorDisplays/
    Message was edited by: robert170

  • Mouse Settings For Dual Displays

    Hi Gang
    Just  started using Dual Displays for Final Cut. Was wondering if anyone had  some tips for maximizing mouse settings? Its taking some time aquiring control of the mouse.
    Should I go to Preferences for adjustments?
    Screen Shots:
    http://www.locationstudio.net/Left.jpg
    http://www.locationstudio.net/Right.jpg
    Thank you
    Mike

    Solved
    Thank you

  • Best Settings for output for HD MPEG 2 files

    hi,
    I'm working on a project with HIGH Res Stills, animating in FCP 4.5
    then outputting for a client who wants to view using MPEG 2 files
    playing on a HD Monitor. My original pic files are on average,
    4000 pix by 3000 at least. What are the best sequence settings?
    DVCPRO 1080i60? or 1280i HD TV? and...what codec should
    I set my Quicktime to...there's no MPEG 2 setting in FCP 4.5?
    Should I do 10bit uncomressed, render a QT, then export that
    as an elementary MPEG 2 Stream out of Compressor or QT Pro? I don't have an HD monitor, so I'm trying to figure out which sequence and export settings will render the most high DEF output? Any thoughts would be MUCH appreciated.
    thx
    G5 Dual 1.7   Mac OS X (10.3.9)   thanks for your advice!

    Thank you for your reply, I've been waiting for any advice before I exported!
    Okay, so definitely recommending
    Format h.264 with 1080p 25fps, progressive  as an .MP4 instead of .MOV?

  • Best settings for outputting to PowerPoint?

    I'm very new to Motion. I would like to output an animated logo generated in Motion for use in the bottom corner of a corporate presentation using PowerPoint on a PC, preferably with a transparent background. Guidance/suggestions would be most appreciated.
    Thank you.

    I wouldn't create a movie that big just to have an animated logo in the bottom right.
    What's the background like in that corner of the PPT presentation? If it's a solid color, simply make a Motion project just big enough for the logo animation itself and make the background of your Motion project the same color as the solid color of your PowerPoint background. Make it bigger than what you need, import it into PPT, scale it down to the size you want. Doing this means that if your presentation is played on a 1600 x 1200 or 1024 x 768 display, it will always look sharp and not get pixelated.
    If your PowerPoint background is not solid, but textured, you take a screenshot of that corner (or export as a pict and crop in Photoshop) and then bring that into Motion and make the Motion project dimensions the same as the size of that screenshot. You then put your logo animation over that screenshot background. You then import that into PPT and line it up to the corner and you shouldn't see a seam.
    By doing it this way, you don't have to have alpha channel support (does PowerPoint even support alpha channel?) You can now use H.264 as your codec and you'll end up with a very small file size.
    Does this PPT presentation get distributed on Windows PCs or is it only used on your Mac? If it is distributed to Windows PC users, you will want to use Flip4Mac's software to make the QT movie a Windows WMV movie instead because every Windows PC can play that. Windows users will get a big red X at the bottom right where your QT movie is if they don't have QuickTime installed. To avoid this issue, I always end up making my videos WMV 9. The $49 version of Flip4Mac should be just fine for this use.
    http://www.flip4mac.com/

  • Hello-Not Sure About the MBP Leopard Settings for the Display

    I want to get a new MBP for my next step. I was also wanting th one-on-one but my bud has not had much expereince (good) with this. I think he and I need the persnal training? Is that the same as one-on-one?
    <edited by host> I was wondering about the new display and how good it looks but is it a look that that is conducive to using other programs. It appears to be soo glossy and if you are not looking head on you miss a lot. Is this new display popular? Can it be changed so other programs can take front and center when you need them t and not the Leopard display all the time.
    any feedback, helpful <edited by host>. I hope tis makes some sense.

    If I were in your position I'd wait until the last possible moment. Vastly faster MBPs are coming (the much discussed Merom chip), possibly by the start of the school season, but absolutely by Oct/Nov. I would not buy now. The current MBP is just the beginning, and in two years it will really be showing it's age.
    17" seems right for you considering your major, but keep in mind the 17" can be a PITA to schelp around.
    If you will be going to a large school they might offer better deals than the online Apple Edu store, so be sure to check before buying.
    The issues you see posted here are not typical. There are a large number of people that do have problems, but there is an even larger universe of owners that have no problems.

  • INFOSET QUERY: Set condition for output display

    Dear Experts,
    I have created a infoset query for display of Material inspection Characteristics using tables QPMK, QPMZ & QPMT.
    now the user wants to display data only of those transaction no.'s starting with 'MC' or 'EQP' or 'WE' so on & so forth.
    I do not know how to incorporate the same in the Infoset. I have tried putting the codes in DATA / START-OF-SELECTION / RECORD PROCESSING etc... but no use.
    There is another option of filtering the transaction no,'s in Layout, but user does not want the same.
    so kindly guide me.
    Thanks.
    Regards,
    Jitesh

    Hi Jitesh,
    Please follow the below stepas . (here pseudo code)
    In Data Section
    DATA: str1 TYPE string,
               str2 TYPE string,
               str3 TYPE string.
    str1 = 'MC*'.
    str2 = 'EQP*'.
    str3 = 'WE*'.
    If you have more strings to compare ..declare those like that.
    In 'Record processing Event' you need to use CHECK statement with CP operatoar of String
    CHECK table_name-transaction_field CP str1 OR  table_name-transaction_field CP str2 OR table_name-transaction_field CP str3.
    CHECK SY-SUBRC EQ 0.
    Genrtae the Infoset "Important step
    Go to SQ01(in a new session) , and see if your getting required result.
    Regards,
    Dinesh
    Edited by: Dinesh Tiwari on Oct 1, 2009 7:17 AM
    Edited by: Dinesh Tiwari on Oct 1, 2009 7:18 AM
    Edited by: Dinesh Tiwari on Oct 1, 2009 8:07 AM

  • Settings for output of various documents

    Hello All,
    Working with SRM 6.0.
    I am unable to define the action profile for other documents other than existing action profile for Purchase order.Through the wizard in we could add conditions for the Purchase order action profile .Hence I am unable to schedule the conditions of the output for various processing types for other objects like contracts,bids etc,.
    Can any body please give me a step by step procedure for defining the actions & action profiles for the condition dependent output?
    Thanks & Regards,
    Nagarajan

    Hello,
    Please check SAP note:- 564826;
    I hope this will help.
    Thanks and regards,
    Gaurav
    PLEASE REWARD FOR USEFUL REPLIES

  • Best settings for outputting for web

    Hello All!!
    I'm hoping someone can help me out.... I'm outputting quicktimes to be uploaded to a web server so they can be embeded on a site for a show reel. What is the best compression setting for a quicktime that maintains it's image quality but loads fast? I've been using h.264 and limiting it to 700 and 800 kbps, im 4:1 audio, deinterlaced, 720x480.
    the quicktimes range in length from 1min to 4min. I used Vimeo's setting and that looks the best, but takes too long to load on web server.
    I've tried different rates for kbps as well as all the suggested pre-sets in Compressor, and my qt's are still coming out 'soft', and I'm not sure what else to try.
    I'm on a MacBook Pro 10.6.7 with 2.6 ghz Intel Core Duo and 4gb of memory, FCP 7.03.
    Thank you for all suggestions and help!!
    -K

    You'll just want to play with it. One trick I like to use, if there's not a lot of panning going on in the audio, is to drop the audio to mono. Cuts the audio bandwidth in half, allowing more room for video to move.

Maybe you are looking for