RF scanner set up /Implementation

Hi
Please explain the procedured invloved in a RF scanner implementation in a Warehouse.
I assume the areas involved are.
1) IMG Mobile config
2) SAP Console setting
3) RF Device to SAP Console communication.
Plse give as much information as possible.

This is definitely not the right forum to ask this question. You would have better luck in the ABAP forum. Please ask your question there. Thanks.
Regards,
Rich Heilman

Similar Messages

I have scanned photos using an Epson V500 scanner set to jpeg format using the least compression (highest quality) setting. When I try to import the scanned jpegs into iPhoto I get an error message saying "The file is an unrecognized format." But if I

I have scanned photos using an Epson V500 scanner set to scan using jpeg format at the highest quality (least compression) setting. When I try to import the scanned jpegs into iPhoto, I get an error message from iPhoto saying "The file is an unrecognized format." But if I reduce the quality setting on the Epson scanner to just slightly below highest quality, the images import into iPhoto just fine. Why won't iPhoto accept jpegs scanned at the highest quality setting? Wondering?

What scanner format settings dis you use? Are these color photos? If they are B/W did you scan as grayscale images? That could be the problem.
Are you able to open them with Preview? If so do a Save As, select full quality and save as a jpeg with a new file name. See if that file will import and work as intended.
OT

LabView set theory implementation

Hey NI community,
I am about to slog through building a set theory implementation. Before I begin I was wondering if there is a current implementation already, or if anyone had ideas for a memory-efficient underlying containment object. Thanks much.
Nathan

I went ahead and implemented a basic set class with GOOP. Base container class is an array of variants, so it's more or less universal. Please comment on usefulness or improvements.
Attachments:
set.zip ‏153 KB

Changing scanner setting

My scanner automatically scans both the front and back of every document I put through the document feeder. I want to change this setting so that it only scans the front page of the document, not the back. How do I do this?

Hi @Ruth123
If the printer was copying both sides, I would have you adjust the copy settings on the front panel of the printer, but since you said this happens when you scan, I will need to know your operating system.
What operating system, and version do you have? Mac or Windows?
Please also let me know what program you are using to scan. With this information I will be able to post back with instructions to change the settings within the software.
Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Elements 11 Scanner set-up for import

I have an Epson V600 photo scanner that I need help setting up so I can import into Elements 11. PLEASE HELP.

Hello there @Jolexy!
I understand your getting a network error when trying to scan to the Mac Book running 10.9. When you scan are you pressing scan on the printer or scan on the computer?
If you are scanning from the computer I would recommend using the application Image Capture. Image Capture come pre installed on the Mac. It can locate an image capturing device such a a scanner and you can initiate the scan from the computer. Image Capture is located in the Application folder on you Mac.
If you are still getting the same error that you need to contact your network administrator then your router may be blocking the scanner and only allow printing. If that's the case you will want to contact your router company and ask them to open the out going and in coming scanning ports.
Let me know how it goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Automated Setter-Method implementation

Hi all,
in a currently running project we are implementing a few "entities" with several attributes. So for time saving I developed a short report, that generates the setter methods with parameters.
But I actually don't have an idea how to automate the implementation of these methods.
Has someone an idea how to do this??
Here is my actual implementation of the program (if someone want to test and copy it; actually it writes the statements for the implementation to a list, from witch you can copy and past it to the ABAP-Editor):
*& Report Z_CREATE_SETTER *
REPORT z_create_setter .
TYPE-POOLS:
seoo, seos.
DATA:
s_class TYPE seoclskey,
s_param TYPE seocmpkey,
attrib_list TYPE seoo_attributes_r,
wa_attrib TYPE seoo_attribute_r,
method TYPE seoo_method_w,
methods TYPE seoo_methods_w,
parameters TYPE seos_parameters_w,
parameter TYPE seos_parameter_w,
out TYPE string.
PARAMETERS:
class TYPE seoclsname OBLIGATORY.
MOVE class TO s_class-clsname.
CALL FUNCTION 'SEO_ATTRIBUTE_READ_ALL'
EXPORTING
cifkey = s_class
IMPORTING
attributes = attrib_list
EXCEPTIONS
clif_not_existing = 1
OTHERS = 2.
SORT attrib_list.
LOOP AT attrib_list INTO wa_attrib.
CLEAR: method, parameter.
REFRESH: methods, parameters.
* Methode anlegen
MOVE s_class TO method-clsname.
CONCATENATE 'set_' wa_attrib-cmpname INTO method-cmpname.
TRANSLATE method-cmpname TO UPPER CASE.
CONCATENATE 'Setter für' wa_attrib-cmpname INTO method-descript
SEPARATED BY space.
MOVE sy-langu TO method-langu.
MOVE '2' TO method-exposure.
MOVE '1' TO method-state.
APPEND method TO methods.
CALL FUNCTION 'SEO_METHOD_CREATE'
EXPORTING
cifkey = s_class
methods = methods.
* Parameter anlagen
MOVE s_class TO s_param-clsname.
MOVE method-cmpname TO s_param-cmpname.
MOVE s_class TO parameter-clsname.
MOVE s_param-cmpname TO parameter-cmpname.
CONCATENATE 'IM_' wa_attrib-cmpname INTO parameter-sconame.
TRANSLATE parameter-sconame TO UPPER CASE.
MOVE 0 TO parameter-pardecltyp.
MOVE 1 TO parameter-parpasstyp.
MOVE wa_attrib-typtype TO parameter-typtype.
MOVE wa_attrib-type TO parameter-type.
MOVE wa_attrib-descript TO parameter-descript.
MOVE sy-langu TO parameter-langu.
APPEND parameter TO parameters.
CALL FUNCTION 'SEO_PARAMETER_CREATE'
EXPORTING
cmpkey = s_param
parameters = parameters.
ULINE.
CONCATENATE parameter-cmpname '.' INTO out.
CONCATENATE 'method' out INTO out SEPARATED BY space.
WRITE: / out.
CLEAR out.
CONCATENATE parameter-sconame '.' INTO out.
CONCATENATE wa_attrib-cmpname '=' out INTO out SEPARATED BY space.
WRITE: / out.
WRITE: / '/aip/if_entity~is_dirty = ''X''.'.
WRITE: / 'endmethod.'.
ENDLOOP.

Let's say I have an object array as a memeber variable for my CustomException class. I also have constructor which will initialize the object array; on top of this I want to add some setter method where in I can set the desired object array.
Can I have this setter? Is there any guidline to have setter method in an Exception class. I have never seen any setter method in the Exception class. Why is it so? Is there any reson behind this?
Here is my sample program
class CustomException extends Exception
     Object objArray[] = null;
     Exception ex;
     public CustomException()
     public CustomException(Exception ex)
          super(ex);
          this.ex = ex;
     public CustomException(Exception ex, Object objArray[])
          super(ex);
          this.ex = ex;
          this.objArray = objArray;
     public Object[] getObjectArray()
          return objArray;
     // Can I have this setter? Is there any guidline to have setter method
     // in an Exception class. I have never seen any setter method in the Exception class
     // Why is it so? Is there any reson behind this?
     public void setObjectArray(Object objArray[])
          this.objArray = objArray;
}

Scanner set up for HP Officejet J4680 All-In-One

I'm trying to set up to scan from the HP OfficejetJ4680 All-In-one. I do not know what software I need to download to my Acer laptop to get the scan function to work on the HP Officejet

Hi Susieque,
The best option, if it's available for your Operating System (Windows 7, etc.), is to download and install the Full Feature Software for your printer. The FFS includes the scanning option.
Here are the instructions:
=========================================================================
In many cases, you can (re)install the Full Feature Software for your printer to enhance its capabilities. The HP Solution Center is an integrated part of the FFS.
(Re)install the basic driver or Full Feature Software:
Drivers control hardware connected to the computer (wired or wireless).
Software controls the programs that interact with the User.
Go to the top of the forum page to Support and Drivers
Enter your Printer Model information, and then go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Scroll down
Look for category Driver - Product Installation Software
Select the appropriate Basic Driver or Full Feature Software – if available for your printer Save the *.exe installation package on your computer -
NOTE the name and the location - the *.exe file will likely save to "Downloads “Install the Software / Driver installation package: It will be named *.exe – the package will most likely be located in the Downloads folder. If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select ‘run as Administrator’ and install.
NOTE: There is sometimes a lot of information at the printer’s website: manuals, how-to pages, and alerts for your printer. Be sure to take an extended look at what’s available.
==========================================================================
I hope this helps!
Say “Thanks!” for the Help by clicking the Kudos Star to show your appreciation.
Fixed? Mark this Post “Accept as Solution” to help others find the answers.
Note: You can find “Accept as Solution” only on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

What is the ideal scanner setting to capture old photos

I have several very old photos that I want to scan using a Canoscan 9950F and incorporate them into a video. I was told by the person who has some of these old photos that she has some on CD at 300dpi. I plan to add motion to some of the old photos and on others (group shots) I'd like to go in very close, isolating on the face of one individual, then adding pull out motion to reveal the group---or vice versa---without artifacts. I have been told I need to set FCE-HD at something like 100% or more of 720x480 to insure quality resolution using motion--- 1140x960 or higher. Can those images scanned at 300dpi work that way or should I re-scan originals at a higher dpi, and if so, what would you suggest?

Depends how big the group is and how small the face. if the face is smallish in the frame, 300dpi on an small picture like 4x5 is going to be marginal to get in as close as you might want.
Measure the frame on the closest size you want to get on the image, then calculate what dpi you have to scan to so that you get an image that will fill the 720x540 SD screen. I can't do the math myself. I simply use Photoshop to make the image size calculations for me.

My ipod touch does notshow up when i plug into my computer. it comes up with scanner picture set up process

Every time i plug my ipod touch in it opens a scanner set up pocess and will not recognise the ipod touch on my computer

http://support.apple.com/kb/ts1538

Adobe Acrobat 9 Standard does not reconize scanner

I have my HP 6280 Printer/Scanner set up as a network device. When I try to scan a document, I get an error message that Adobe does not reconize the requested device. It worked for a while after installation, but has since stopped. Scanner works with other programs, how can i correct this problem? Dell Laptop using Windows 7 Pro.

Are you running at least version 9.2 of Acrobat? Are you able to log in with a new user account on Windows to see if it works?

PS CS6 trial crashes after importing huge image from scanner

Hi.
Here is my hardware:
   Macbook pro 4 GB DDR3 core i5 with plenty of HD space
   Epson V700 scanner (6400 dpi scanning capability)
My Software:
   Adobe CS6 trial
What I want to do:
   Scan a typical photo that is 6 by 6 inches at 6400 dpi as a bitmap, for utmost quality
What I tried:
   File -> Import -> Images from device -> then selected my scanner, set it to scan at 6400 dpi and save as a bitmap
My problem:
    When the scanner head is done scanning and the progress bar for scanning the image completes and moves to the next step (presumably writing the image to the file), PS crashes and gives me an error log. It is far too detailed for me. I have no problem scanning images at lower resolutions like 1200 dpi. But this scanner is capable of 6400 dpi and I want to take full advantage of it. I cannot use the scanner software that came with teh scanner because tech support told me the scanner software has a 1.something GB file limit size. They told me 3rd party software like PS should be able to scan unlimited file sizes.
   I suspect the file size migh be too large (16 GB)
My question:
   Is this a bug in the trial or something? Should PS be able to scan a 6 by 6 inch photo at 6400 dpi and save it as a bitmap?
Any 1st thoughts? I imagine it would be useful to upload the error log. I can do that if it is ok to do so
Thanks, your help is appreciated since I would lik eto scan this image at 6400 dpi. If I am given a solution, I will probably buy the full version

That's a bigger image than photoshop elements can handle (the pixel dimensions are roughly 38,400 x 38,400)
I suspect the problem in cs6 is more due to lack of ram on your machine (compared to the file size), but you should really ask about cs6 on the photoshop forum:
http://forums.adobe.com/community/photoshop/general
Also unless the photo is a slide or negative, you probably don't need to scan at max resolution.
Anyway for elements you'd need to reduce either the dpi or specify a smaller size than 6 x 6.
And then probaly scan (save) to your hard drive instead of scanning from within elements to a file format such as tif with compression if the scanner offers that option.
It depends on what your scanning, but for example i usually scan 35 mm slides at 4800 dpi (different scanner) at there default size (24mm x 36mm) and the file size is usually in the 200 to 300 mb range.
Message was edited by: R_Kelly

Interconnect scanner with java'aplicationa

I have to do an aplication'java and this has to comunicate with a scanner,
the scanner'drivers is implement in C. I mean use JNI for the comunication
between drivers and the aplication'java but I need that the methods'drivers
be implement how native.
I read that I have to do something like a wrapper or swing generators'wrappers
anyone have some experience with my problem?
please I need some orientacion about how begin to work
Sorry for my English,It�s very bad
thank for advance

Hi
Navigate to your view and make it editable
add barcode UI element and a text view UI element
In the view designer define a action ex: scan that take a parameter called scantext
In the context create a value attribute of type string
select your barcode ui element and assign the type property to intermic or symbol ( this barcode is supported to those manf)
assign your action ex: scan to the onRead event of the barcode reader
Map the context attribute to your text view Ui element
add the below source code in your view implementation
public void onActionScan(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent, java.lang.String scantext )
//@@begin onActionScan(ServerEvent) wdThis.wdGetContext().currentContextElement().setData(scantext);
//@@end
public static void wdDoModifyView(IPrivateBarCodeTestView wdThis, IPrivateBarCodeTestView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
//@@begin wdDoModifyView
if (firstTime) {
IWDBarCodeReader barCodeReader = (IWDBarCodeReader) view.getElement("BarCodeReader");
barCodeReader.mappingOfOnRead().addSourceMapping ("data","scantext");
//@@end
let me know how it goes....

What adobe setting do I use?

I am having problems with recipients opening my scanned adobe files. When a recipient opens my file, the print is huge and it prints exactly as viewed. If they attempt to print a one page document, it prints a portion of the document and ends of being 10 pages.

My scanner setting have not changed. I recently had to reload my operating system and reinstall firefox. When I go into tools I click on the portable adobe and use the adobe in firefox setting.

Implementing java beans in forms 10g [Problem]

Hi All,
I am trying to implement the java bean in the forms 10g
I performed the following steps, but no luck.. Could anybody please help me in this?
I have created a simple java class
package mypackage1;
public class MyClass
public String GetString(String a)
return a;
Make a jar myjar.jar out of it.
Copy this jar files in $ORACLE_HOME/forms/java directory
and set the archive.jini parameter in formsweb.cfg to
archive_jini=frmall_jinit.jar,Myjar.jar
Created a simple form having one button, one textbox
Set the implementation class property of text item to mypackage1.MyClass
on button pressed trigger, I wrote
set_custom_property('block2.text_item4',1,'GetString','Hello World');
Ideally, on button pressed, it should show the text "Hello World" in the etxt box. But on button pressed nothing is happening and in java console on error is appearing.
My java console output is
Loading http://asst104253:8889/forms/java/frmall_jinit.jar from JAR cache
Loading http://asst104253:8889/forms/java/Myjar.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
Could anyone please tell me what I am doing wrong?? And how do I achieve this functionality??
Please, any help appreciated !!

Hi there
The is plenty wrong with this code:
1. MyClass is not extending VBean
2. There is no public boolean setProperty(ID ID, Object args) method and no property IDs have been defined so set_custom_property('block2.text_item4',1,'GetString','Hello World'); will not execute anything
3. If you're hoping to return values back from the bean, you need to define a custom event and associated ID.
If you're just looking for some java code to return values in a similar manner as normal Oracle functions then you may want to consider using forms java stored procedures which are based on static java methods. Beans are really more for interaction type stuff with other applications.
But any way if you want to do it this way (i.e. using beans) then at very least you class should look something like (Note, I have not compiled is so there may be a few errors):
package mypackage1;
import oracle.forms.handler.IHandler;
import oracle.forms.ui.CustomEvent;
import oracle.forms.properties.ID;
import oracle.forms.ui.VBean;
import oracle.forms.engine.Main;
import oracle.forms.engine.*;
import oracle.forms.handler.*;
public class MyClass extends VBean
// initiating event id
protected static final ID pgetString = ID.registerProperty("GetString");
// return value id
private static final ID preturnValue = ID.registerProperty("returnValue");
// return event id
protected static final ID preturn = ID.registerProperty("returnEvent");
static IHandler mHandler;
public String GetString(String a)
// may do some string manipulation here.
return a;
public boolean setProperty(ID ID, Object args)
if (_ID== pgetString)
if (_args instanceof String)
String myArg = (String)_args;
mHandler.setProperty(preturnValue,getString(myArg));
CustomEvent ce = new CustomEvent(mHandler, preturn);
dispatchCustomEvent(ce);
Keep your button as is and then to return the value back into forms place a WHEN-CUSTOM-ITEM-EVENT trigger on the bean area with something like this:
DECLARE
     BeanValListHd1 PARAMLIST;
     ParamType NUMBER;
     EvenName     Varchar2(20);
     CurrentValue Varchar2(2000);
BEGIN
     BeanValListHd1 := get_parameter_list(:SYSTEM.CUSTOM_ITEM_EVENT_PARAMETERS);
     IF :SYSTEM.Custom_Item_Event = 'returnEvent' THEN
          IF iD_NULL(BeanValListHd1) THEN
          MESSAGE('NO PARAMETER FOUND FOUND');
          ELSE
          GET_PARAMETER_ATTR(BeanValListHd1,'returnValue',ParamType,CurrentValue);
          MESSAGE('IN CUSTOM EVENT THE STRING RETURNED IS '|| CurrentValue);
          END IF;
     ELSE
          MESSAGE('no value');
     END IF;
END;
hope this helps
Q

Configuration setting of QM

Hi all ,
can pls provide me the configuration setting to implement QM .
Regards
Prerna

Hi
This is very generic question which can have many answers as per one's knowledge
still
To start with
Refer
QM
Re: QM configuration
Re: qm configuration doc(urgent)
Quality Management (QM)
The specified item was not found.
http://help.sap.com/bp_bl603/BBLibrary/Content_Library_BL_EN_IN.htm
Regards
Sujit..

RF scanner set up /Implementation

Similar Messages

Maybe you are looking for