RFC fails while converts message of SOAP

Hello,
I have create a scenario SOAP to RFC. I am using the same BAPI request and response in both interfaces and no mapping. when i send a message, RFC giving problem for the message from SOAP. actually i am not doing mapping then why the message is giving prob.
Any body has idea.. hope the xml to rfc conversion is not proper by RFC adpater. or some other probs...
I can see the bapi response is not as expected. giving error.
How to check the message format.. and what bapi is taking and change before it processed by bapi.
Pls advice,
Srinivas

Hi there,
Im having the same problem when calling an RFC from a webservice (via the SOAP adapter) . i.e. I get wrong results from the RFC/SOAP response.
The strange thing here, is that when I call the same RFC from a JCO client (not via XI) then the I get the correct results from SAP. The input parameters are the same in both cases.
Any ideas where to check?
Many thanks!
Rob.

Similar Messages

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Error while posting messages to SOAP sender adapter SP 13

Hi Friends,
I have configured a SOAP sender adapter in XI 3.0 and is using the URL
http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_WEBSERVICE:CC_WEBSERVICE_SOAP to post the messages. When I open the URL in the browser I am getting the error.
Message Servlet is in Status ERROR
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#5 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal not instantiated
ModuleProcessorRemote not instantiated
But when I test the URL http://host:port/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:BS_WEBSERVICE:CC_WEBSERVICE_SOAP to check the communication channel I am getting the right response as below.
<?xml version="1.0" ?>
<http://host:port/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:BS_EBTR_WEBSERVICE:CC_EBTR_WEBSERVICE_SOAP> <s:ChannelInfo xmlns:s="http://sap.com/xi/WebService/xi30">
<channelID>e7ac884596ea3d088cbfd8b434f942f2</channelID>
<name>CC_WEBSERVICE_SOAP</name>
<type xmlns:st="http://sap.com/xi/XI/System">st:SOAP</type>
<direction>INBOUND</direction>
<party />
<service>BS_WEBSERVICE</service>
</s:ChannelInfo
I used the http capture to debug, In the 1st case though I am getting "Message Servlet in status error" I am seeing a 200 OK code in the http capture tool. When the message is posted from .net client proxy we are getting a 500 internal server error.
Am not sure what causes the error ? I saw two notes in SDN related to SOAP - J2EE SP13. We are in SP13. Is this the issue ? Wanted to know your opinion before applying the notes.
Thanks & Regards,
Mathew

ABAP & Java stack was on different SP levels.

Error while sending message to SOAP receiver

Hi ALL,
when i send message from the Service Regestry my interface is working,but when i coppy the same WSDL file in the Service registry in desktop and send message using AltovaSPY i am getting this error.
com.sap.aii.af.service.cpa.CPAException: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve inbound binding for the given P/S/A values
need u'r help.
thanks
Souz..

Hi Dominic,
Looks like Cache is not got updated.
Go to SXI_CACHE and check whether it is green or not.If not refresh it.
Also refresh CPACache with PIDIRUSER or any user with similar roles.
to refresh use this URL : http://host:port/CPACache/refresh?mode=full
After this inactivate and activate ur CC.
If this wont work for u...then restart J2EE server.
Regds,
Pinangshuk.

Display in PDF Browser - Item failed to convert in Outlook

Display in PDF Browser - Item failed to convert in Outlook
ben soules - 09:26pm Aug 22, 2007 Pacific
Hi Experts,
This is a bit of a pain I have to distrubte
Adobe Acrobat Pro 8.1 to about 3000+ users and I am having a problem,
In Prefs in "Adobe Acrobat Pro 8.1"
When I tick then untick, "display in PDF Browser" from the Preferences, My Outlook will fail to convert to PDF. I get an "Item failed to convert" message and a log file. Also Word 2003 will not post a .PDF to an email.
If I restart "Outlook 2003" it will create a "pdf" when I click the icon the first time, the second time I click it will fail.
Please help.
===================================================
Requested: 1,
Converted to PDF: 0,
Skipped [Already in PDF]: 0,
Skipped [PDFMaker failed to convert]: 1
Details of Email to PDF conversion:
Failed to Convert:
From: WS XXXX XX XXXXXXX, Subject: FW: testing, Date: 8/08/2007, Status: Item failed to convert

We also deployed 8.12 to over 1000 users with the "Disable PDF in browser" option checked using the customization wizard. Now we're finding some users need it to view certain PDFs in a web-based application.
We would like to add the option, but removing the registry key doesn't actually install the option when you check it. It seems you might have to create a new mst then redeploy. We'd really like to not have to do that, if at all possible.
In the Reader archives, one guy suggested running this:
msiexec /i Adobe_Reader_8.1_MUI.msi ADDLOCAL=ReaderBrowserIntegration
I haven't tried that yet. Any feedback or other suggestions?
E Long
Austin, TX

Wm_Valid: Fail to convert to internal representation error while inserting

Hi,
I'm trying to execute an insert via XmlCommand. The table is created with this statement:
create table testtable4 (testtable4_pk number, mydate date, myts timestamp with time zone, wm_valid wm_period);
I have a problem while inserting on a simple table with wm_period field. The c# code is the following:
OracleConnection oraConnection;
OracleCommand insertCommand;
string[] KeyColumnsList = null;
string[] UpdateColumnsList = null;
string xml1 = "<?xml version=\"1.0\"?>\n" +
"<ROWSET>\n" +
"<MYROW num = \"1\">\n" +
"<TESTTABLE4_PK>1</TESTTABLE4_PK><MYDATE>2012-01-20T00:00:00.00000</MYDATE><MYTS>01-01-11T00:00:00.000000000 +00:00</MYTS>" +
"</MYROW>\n" +
"</ROWSET>\n";
string xml2 = "<?xml version=\"1.0\"?>\n" +
"<ROWSET>\n" +
"<MYROW num = \"2\">\n" +
"<TESTTABLE4_PK>2</TESTTABLE4_PK><MYDATE>2012-01-20T00:00:00.00000</MYDATE><MYTS>01-01-11T00:00:00.000000000 +00:00</MYTS><WM_VALID><VALIDFROM>01-01-11T00:00:00.000000000 +00:00</VALIDFROM></WM_VALID>" +
"</MYROW>\n" +
"</ROWSET>\n";
KeyColumnsList = new string[1];
KeyColumnsList[0] = "TESTTABLE4_PK";
UpdateColumnsList = new string[4];
UpdateColumnsList[0] = "TESTTABLE4_PK";
UpdateColumnsList[1] = "MYDATE";
UpdateColumnsList[2] = "MYTS";
UpdateColumnsList[3] = "WM_VALID";
try
string ConnString = "Data Source=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=" + host + ")(PORT=" + port + ")))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=" + sid + ")));User Id=" + username + ";Password=" + password + ";";
oraConnection = new OracleConnection(ConnString);
oraConnection.Open();
using (OracleCommand cmd = new OracleCommand())
cmd.Connection = oraConnection;
cmd.CommandText = "alter session set NLS_DATE_FORMAT = 'YYYY-MM-DD\"T\"HH24:MI:SS.SSSSS'";
cmd.ExecuteNonQuery();
cmd.CommandText = "alter session set NLS_TIMESTAMP_FORMAT = 'YYYY-MM-DD\"T\"HH24:MI:SS.SSSSS'";
cmd.ExecuteNonQuery();
cmd.CommandText = "alter session set NLS_TIMESTAMP_TZ_FORMAT = 'YYYY-MM-DD\"T\"HH24:MI:SSXFF TZH:TZM'";
cmd.ExecuteNonQuery();
insertCommand = new OracleCommand();
insertCommand.Connection = oraConnection;
insertCommand.XmlCommandType = OracleXmlCommandType.Insert;
insertCommand.XmlSaveProperties.KeyColumnsList = KeyColumnsList;
insertCommand.XmlSaveProperties.RowTag = "MYROW";
insertCommand.XmlSaveProperties.Table = "TESTTABLE4";
insertCommand.XmlSaveProperties.UpdateColumnsList = UpdateColumnsList;
insertCommand.XmlSaveProperties.Xslt = null;
insertCommand.XmlSaveProperties.XsltParams = null;
//this works
insertCommand.CommandText = xml1;
insertCommand.ExecuteNonQuery();
//this fails
insertCommand.CommandText = xml2;
insertCommand.ExecuteNonQuery();
insertCommand.Dispose();
oraConnection.Close();
oraConnection.Dispose();
catch (Exception err)
this.WriteLogErr("ERROR: " + err.Message);
With the first ExecuteNonQuery I attempt an insert of a data value and a timestamp with timezone value. The execution is ok (xml1).
When the second ExecuteNonQuery is run (with the value of wm_valid), the execution fails with this error:
ERROR: ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException: 'java.sql.SQLException: Fail to convert to internal representation: 01-01-11T00:00:00.000000000 +00:00' encountered during processing ROW element 0. All prior XML row changes were rolled back. in the XML document.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 111
ORA-06512: at line 1
The stored procedure at row 111 calls this Java method:
oracle.xml.sql.dml.OracleXMLStaticSave.insertXML(int, java.lang.String) return int
The structure of complex data type wm_period is:
CREATE OR REPLACE TYPE wm_period AS OBJECT (
validfrom TIMESTAMP WITH TIME ZONE,
validtill TIMESTAMP WITH TIME ZONE);
The problem is: I am able to insert a timestamp with timezone value (myts) but I'm not able to insert a wm_valid that contains two values of the same type...
This works: <MYTS>2011-01-01T00:00:00.00000</MYTS>
This fails: <WM_VALID><VALIDFROM>2011-01-01T00:00:00.00000</VALIDFROM></WM_VALID>
I also tried to change the format of NLS_TIMESTAMP_TZ_FORMAT with a lot of various setup, but nothing changed.
Thanks in advance for your precious help.
Best Regards,
Mario.

Hi jschell ...thnx for ur reply......
the getString(2) parameter is just avarchar which
return the error from the procedure, if its ok,then
the query is executed properly..its just a check I've
kept to jump into the next step.If the status is OK,
then I'm retrieving the values from the cursor. I'm
getting right value for this parameter.I wasn't questioning the logic. I understand what you are doing.
However JDBC drivers can have problems when items are retrieved out of order.
You might also try switching driver types. If the thin works and oci doesn't (or visa-versa) then you know it is a driver problem and you will just have to try a work around.

SOAP request failed with return message 2147483653

Hello everybody!
I've got a constant error while trying to execute following MDX-statement via BI Java SDK:
SELECT {[0BCS_REPMOD].[N],[0BCS_REPMOD].[P],[0BCS_REPMOD].[R],[0BCS_REPMOD].[S]} DIMENSION PROPERTIES MEMBER_UNIQUE_NAME, MEMBER_CAPTION, PARENT_UNIQUE_NAME on 0 , {[0PCOMPANY].[000001],[0PCOMPANY].[000002],[0PCOMPANY].[000102],[0PCOMPANY].[000103],[0PCOMPANY].[000104],[0PCOMPANY].[000200],[0PCOMPANY].[000003],[0PCOMPANY].[000004],[0PCOMPANY].[000100],[0PCOMPANY].[000101],[0PCOMPANY].[000105]} DIMENSION PROPERTIES MEMBER_UNIQUE_NAME, MEMBER_CAPTION, PARENT_UNIQUE_NAME on 1 FROM [$ZBCS_OV12]WHERE{[0BCS_REPMOD].[N],[0BCS_REPMOD].[P],[0BCS_REPMOD].[R],[0BCS_REPMOD].[S]}{[0PCOMPANY].[000001],[0PCOMPANY].[000002],[0PCOMPANY].[000102],[0PCOMPANY].[000103],[0PCOMPANY].[000104],[0PCOMPANY].[000200],[0PCOMPANY].[000003],[0PCOMPANY].[000004],[0PCOMPANY].[000100],[0PCOMPANY].[000101],[0PCOMPANY].[000105]}*
The error is:
SOAP request failed with return message 2147483653 (Log not found (in main memory))
What to do with this message? How to understand what is the cause of the error?
The same query is working fine in MDX-test tool.
WBR, Dmitriy.

Solved myself, it's because the query used in my code have user input variable.

Receive message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)... "Error occurred while converting the file 'songname'. The required folder cannot be found." CD/DVD ROM is no longer recognized until restart.

Consistently receive the following message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)...
"Error occurred while converting the file 'songname'. The required folder cannot be found."
CD/DVD ROM is no longer recognized until computer is restarted.

I have the same problem. I recently moved my music from a Vista PC to a new Laptop with an external CD drive. It will copy one song from the CD and it will show in the Music file and then I get the message ' Error importing a CD - Folder not found'. I must unplug the CD drive and plug it back in. I have seen no fix for this problem.

SOAP Receiver- Error While Sending Message: 500 Internal Server Error

Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
Abhishek

Hello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

Export release build failed with an error message: complilation failed while excuting : compile-abc

I updated air sdk from 4.0 to 16.0 beta to fix apple app store submitting bug. I can build the project and run it on simulator without any problem. But when I tried to export the ios release build, I got this error message: complilation failed while excuting : compile-abc.
I use commmand line to excute compile-abc.exe with the parameters that adt gives it, but it failed without any error message.
Here is the command line:
compile-abc.exe -mtriple=armv7-apple-ios -filetype=obj -sdk "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/avmglue.abc" -fields "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/air-fields.arm-air.txt" -O3 -abc-file-list=E:\MyApp\bin-debug\AOTBuildOutput8184169967790207636.tmp\ABCFilesList.txt
There's a empty file AOTBuildOutput-0000001821_1821.o left in the command line workaroud path. I opened file AOTBuildOutput-0000001821.abc, but didn't get any clue. How can I trace this problem?

Still having similar issues - seems to be when I embed an image - but works for every release except for release build
Tried your work around but doesnt seem to make a different
[Embed(source = "/../assets/[email protected]")]
protected static const ATLAS_IMAGE:Class;
[Embed(source = "/../assets/[email protected]", mimeType = "application/octet-stream")]
protected static const ATLAS_XML:Class;
[Embed(source = "/../assets/iconMap.png")]
protected static const ATLAS_IMAGE_LOW_RES:Class;
[Embed(source = "/../assets/iconMap.xml", mimeType = "application/octet-stream")]
protected static const ATLAS_XML_LOW_RES:Class;
if(Starling.current.viewPort.width > 320)
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE(), false), XML(new ATLAS_XML()));
}else{
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE_LOW_RES(), false), XML(new ATLAS_XML_LOW_RES()));

Issue about BI JAVA SDK-SOAP request failed with return message 2147483653

Dear Experts,
I'm trying to use BI JAVA SDK to connect BW by using XMLA connector.
But there's an error messaet said :
SOAP request failed with return message 2147483653 ( Invalid MDX command with INCLUDING)
I'm really new to this JAVA SDK, and after searching help in SAP Service Market and Google, there's no helpful suggestion.
please help me about how to fix this error.
Here is my code:
IBIConnection connection = (IBIConnection) cf.getConnectionEx(cs);
      IBIOlap olap = connection.getOlap();
      Cube cube = olap.getObjectFinder().
      findCubeFirst((String)null, "ZFI_C11/ZFI_C11_Q001");
    // This is just a sanity check to verify that the
    // cube on which this example relies was retrieved
    if (cube==null){
        System.out.println("no cube found");
// Didn't print out this message, seems it can connect to BW and get the InfoCube and Query.
    Dimension plantDimension = olap.getObjectFinder().
    findDimensionFirst(cube, "ZPLANT");
Dimension materialDimension = olap.getObjectFinder().
    findDimensionFirst(cube, "ZMATERIAL");
IBIQuery query = olap.createQuery(cube);
IBICommandProcessor commandProcessor = query.getCommandProcessor();
commandProcessor.moveDimensionToRows(plantDimension);
commandProcessor.moveDimensionToRows(materialDimension);
IBIDataSet dataset = query.execute(); // After execute this statement, error happens.
Thank you!
Andy

Solved myself, it's because the query used in my code have user input variable.

In 10.7.3 I get a message: error occurred while converting file. You do not have the privilege to make changes.

in Itunes 10.7.3 I get a message: error occurred while converting file. You do not have the privilege to make changes. This just started and I can not import my cds. Any thoughts?

Do you have read& write permissions to your iTunes library?
See this thread: Re: "Error has occurred... You do not have the privilege to make changes."

Failure while unmarshalling message: Failed to transform MFL content

hi ,
I am performing Flat to XML message transformation using OSB.
I have made a MFL using format builder and imported that MFL into my proxy service (Request Message type).
now when i am trying to run my proxy service.its Showing error "Failure while unmarshalling message: Failed to transform MFL content from binary to XML".
I have tested my MFL Using format tester and it is giving desired transformed output(FLAT to XML).
Please let me know if anybody knows the possible cause.
Thanks in advance.

http://biemond.blogspot.com/2008/12/flat-file-to-xml-with-oracle-service.html
OSB: issue with MFLTransform: Error transforming CSV file to XML
http://kr.forums.oracle.com/forums/thread.jspa?threadID=867859
Regards,
Anuj

I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD

I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Lastest Itunes version loaded - Receive the following error message when trying to download a music CD: "Error occurred while converting the file (title of CD) A file was specified instead of a folder."

OS X Mavericks with latest itunes version loaded.
Receive the following error message when attempting to download a music CD: " Error occurred while converting the file (name of music CD). A file was speceifed instead of a folder."

The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562

RFC fails while converts message of SOAP

Similar Messages

Maybe you are looking for