RFC for Costcentre of Position

Hi,
for a given position (S) without a Person assigned, I want to find out the costcentre it belong to. Is there an RFC to achieve this?
regards,
  Thibault

Hello Thibault
Function group HRWPC_POSITIONPROFILE (<i>Position Profiles</i>) probably contains all the required RFC functions.
To check if a position is assigned to a person (= holder) or not, you can call function module HRWPC_RFC_PP_HOLDERS.
If the TABLES-parameter HOLDER is initial then you can read the cost center using HRWPC_RFC_PP_COSTDISTRIBUTION (returns main cost center and cost center distribution = infotype 0018).
Final remark: The function group is available since ECC 5.0 but I guess similar functions are also availabe on release 6.20.
Regards
   Uwe

Similar Messages

  • Can you change the units used for size and position in layout editor?

    Hello,
    In Aperture 3.4, does anyone know if you can change the units used for size and position in layout editor?  The page is set in inches, but the image size and position are given in centimetres and I would prefer to work all in inches to create custom layouts.  I can't see any way to change this.  If anyone knows how it would be much appreciated.  Thanks!

    Aperture uses the unit settings defined in the System Preferences.  Set the "Measurement Units" in the "Region" tab of the "Language & Text" preferences to "US"; the Aperture will display the Size & Position in inches, if it is the "Book" layout manager you are asking about.
    Merry Christmas!
    Léonie

  • ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

    Dear all,
    Hi,
    I am configuring solution manager 7.0.
    In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
    program WEBADMIN not registerred.
    can any one tell me how to register this program in sap gateway.
    best regards
    azeem

    Hi Azeem,
    Just before creating the rfc connection do this step.
    Set-Up Solution Manager Connection to Solution Manager Diagn
    Use
    Check the connection to function Solution Manager Diagnostics.
    Default Settings
    The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
    Activities
    If the default values are correct, save the settings.
    To run the Solution Manager Diagnostics in another system, enter the required data and save.
    Also check that your java is active.
    Regards
    Ashok

  • BAPI/RFC for Service Complaints Creation in CRM 5.0

    Hi,
    We are working on the Complaints and Returns module in CRM 5.0. We have found the Transaction Code for the same. (CRMD_BUS2000120).
    Not able to find the BAPI/RFC for the same.Let us know if any. Appreciate your comments on the same.
    Thanks,
    Moorthy

    Hi,
    Thanks for the response
    I am not talking about Service Order. I have requirement to create a Service Complaint. For that the transaction is CRMD_BUS2000120. Now I need to find the function modules/RFC available for this requirement.
    Hope it clarifies .
    Even I have found function module called -CRM_COMPLAINT_API_CREATE but not sure right one
    Thanks,
    Moorthy

  • BAPI OR RFC FOR CREATION OF MASTER DATA

    Hi
    I want BAPI or RFC for master data creation,(Vendor,Customer,material,Service master)
    Vendor(MK01)
    Customer(XD01)
    Material(MM01)
    Service Master(AC01)
    Pls Help me on this
    Regards
    Rajan

    Hi ,
    For material
    BAPI_MATERIAL_SAVEDATA
    For service
    BAPI_SERVICE_CREATE

  • "No valid RFC for the system VEP" in solman_setup in solman7.1

    Hi Gurus,
         I've installed Solman 7.1. Configured STMS as single domain alone. STMS was successfull and the RFC was created and that also successfull. But in solman_setup, in system preparation phase, check STMS, its throwing the error "No Valid RFC for the system VEP".
              I tried deleting the RFC and recreating it, Deleting the STMS ans reconfiguring it, Tried 000, 001 and 100 client, Restarted the SAP server, Restarted the OS lvel also. But nothing works. I've searched but no solution works. Please suggest me what might be the solution for this.
       And also I need to configure the MOPZ in solman 7.1. Please guide for that, since i've not doone in 7.1 and everything in this was new.
    Thanks and Regards,
    Santhosh Kumar.

    Issue resolved by activating single system landscape in STMS.
    Regards,
    Santhosh Kumar.

  • How to start SAPGUI at entry point to RFC for debugging (using JCO)?

    Hi,
    I am calling an RFC using JCO and trying to have the SAPGUI pop up at the entry point to the RFC for debugging.  But it is not working on Mac OS X.
    I activate the debug via
       JCO.Client client = JCO.createClient(..);
       client.setAbapDebug(true);
       client.setSapGui(1);
       client.connect();
    it gives error:
    sh: line 1: /usr/sap/DV2/SYS/exe/run/sapgui: No such file or directory
    com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Start 'sapgui' failed.
         at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
         at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1098)
    I then tried to set environment variable SAPGUI=/Applications/SAPGUI\ for\ Java\ 6.3r5.2/SAPGUI\ 6.30rev5.2.app/Contents/MacOS/SAPGUI
    and it then starts up the SAPGUI for Java Logon Pad.
    But, I want the SAPGUI to start up at the entry point to the RFC.
    Is this possible in Mac OS X?  It has worked before on Windows using the RFC SDK utilities or middleware tools such as IBM Crossworlds.
    Thanks

    Hi Robert,
    Thanks for the reply, it was very helpful as I had given up hope on getting a solution.  Unfortunately I am still getting an error.
    1) I created a script as per your directions containing
    "/Applications/SAPGUI for Java 6.3r5.2/SAPGUI 6.30rev5.2.app/Contents/MacOS/SAPGUI" -n -o $*
    2) Now the SAPGUI application starts, but does not open a window and I get the error:
    ERROR #############################
    18.05. 11:58:42.943 ERROR: AgiWindowAdaptor::update: no menu
    ERROR #############################
    3) I switched on the tracekeys with -t CON,SES,EVT,C_AGI to get more detail:
    18.05. 11:58:41.420 TRC: Active trace keys: CON,SES,EVT,C_AGI
    18.05. 11:58:42.709 CON: new GuiConnection
    18.05. 11:58:42.727 CON: GuiConnection.open(/H/<appserver>/S/3235&rfcid=02D5428B909E32190000,tmp)
    18.05. 11:58:42.846 CON: new GuiNiNetConnection
    18.05. 11:58:42.872 CON: GuiNiNetConnection.open(conn=/H/<appserver>/S/3235&cpg=1127&jenc=MacRoman&jloc=en&rfcid=02D5428B909E32190000)
    18.05. 11:58:42.872 CON: GuiNiNetConnection.open: resolved hostSpec = /H/<appserver>/S/3235
    18.05. 11:58:42.915 CON: -
    18.05. 11:58:42.916 CON: GuiNiNetConnection: sending DIAG data to connection for modus 0
    18.05. 11:58:42.918 CON: -
    18.05. 11:58:42.919 CON: GuiNiNetConnection: sending DIAG data to connection for modus 0
    18.05. 11:58:42.927 C_AGI: calling AgiSessionPool->ParseIt() for modus 0
    18.05. 11:58:42.929 C_AGI: AgiLibAdaptor::onNewPrimary
    18.05. 11:58:42.941 C_AGI: returned from AgiSessionPool->ParseIt() for modus 0
    ERROR #############################
    18.05. 11:58:42.943 ERROR: AgiWindowAdaptor::update: no menu
    ERROR #############################
    18.05. 11:58:42.950 SES: GuiAutomationProcessor: processing automation call list for modus id 0
    18.05. 11:58:43.043 SES: new GuiSession
    18.05. 11:58:50.557 CON: GuiNiNetConnection: sending CLOSE data to writer thread
    18.05. 11:58:50.791 CON: -
    18.05. 11:58:50.791 CON: GuiNiNetConnection: sending DIAG data to connection for modus -1
    18.05. 11:58:50.793 C_AGI: AgiLibAdaptor::onDelContainer
    18.05. 11:58:50.794 C_AGI: AgiLibAdaptor::onDelContainer
    18.05. 11:58:50.794 C_AGI: AgiLibAdaptor::onDelPrimary
    18.05. 11:58:50.795 CON: GuiConnection.destroyNetConnectionAndParser
    com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Start 'sapgui' failed.
         at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
         at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1098)
         at com.sap.mw.jco.JCO$Client.connect(JCO.java:2983)
    Any further ideas on what is wrong?   There is a post on another forum http://listserv.sap.com/pipermail/linux.general/2002-June/002538.html with the same error, but no response..
    Thanks,
    Richard

  • Regarding RFC for SD n MM related to RFID

    hi all
    Will anybody give RFC for delivry of goods in Retail m using RFID technology
    Regards
    Abhijeet

    try to make use of Tcode BAPI
    or
    search in SE37 with search terms delivery.
    Regards
    Prabhu

  • BAPI or RFC  FOR T-CODE F-32

    hi all,
            can any one help please..
           i am searching for a bapi or RFC for t-code f-32..please help me if any one know about this.
    regards,
    devi....

    hi all,
            can any one help please..
           i am searching for a bapi or RFC for t-code f-32..please help me if any one know about this.
    regards,
    devi....

  • Commitment for a Block Position of PO in CJI5

    Hi experts,
    Is it possible to display the amount commitment for a Block Position of a Purchase Order in the report CJI5?
    Because when I block the item of a PO, the value of commitment become 0; and I want to keep it as before block.
    Thanks!

    Hello,
    maybe the modification note 562211 might be useful for you.
    Kind regards,
    Dirk

  • Exact inbound Idoc or RFC for BP based on ROLE/Customer/Vendor ?

    Hi ,
    I need a inbound IDOC or RFC for Business partner in BP transaction posting based on Customer master or vendor master Role ...

    Hi Frederic,
    I need to post data in to BP transaction(customer master data and vendor master)  role using BODS via IDOC. Required IDOC's for posting. 

  • Business area to be grayed out or hidden for IM program position

    Hi Experts,
    We want to make the business area field to be grayed out or hidden in IM program position.
    We have tried to find of the Field selection for IM program position in configuration, but unfortunately we have not found out any configuration path for the same.
    Then we tried to control the business area value by putting any validation / Substitution in IM program position.
    But we have not found any validation or substitution for IM program in Customization.
    Can you please help in the above issue ??
    Regards,
    Pradip Shelke

    Hi,
    There are no configuration nodes nor any substitution or validation available in SAP (standard) that will help in controlling the business area field. The only option available would be to look at user exits:
    AAIC0001 | IM Summarization: Processing values after selection        
    AAIC0002 | IM Summarization: Processing of assigned entities after sel.
    AAIC0003 | IM Summarization: Definition of User-Defined Characteristics
    Please note that business area is a general field that is used across modules in SAP therefore cannot be restricted via authorizations (unless all effects are considered).
    Regards,
    Ammar

  • BAPI or RFC for replicate the transaction LX03

    Hi experts,
    anyone know any BAPI or RFC for replicate the transaction LX03?
    Thanks

    There are no alternate transaction for OBY6

  • Text data source for the field Position(PLANS)

    Hi Experts,
    I have an infoobject ZPOSITION which i am using in a cube for this i can able to display key values but i want to display text for this ZPOSITION. The source for this field is Position(PLANS) which i have tacken from pa0001 table.
    I have an another infoobject 0HRPOSITION for this i have already loaded data using data source 0HRPOSITION_TEXT.
    Is there any other text datasources for this field Position(PLANS)?
    And
    Is it possible to load data from one info object to another info object?
    Regards,
    Sridhar.K

    Hi Sridhar,
    Check out in the infotype PA0001 for the check table for this field. In this table you will have the description for the field PLANS (Position).
    I request you to catch hold of functional HR team member to know where the text value for the Position (PLANS) is stored. You can get the info from them immeadiatly.
    After knowing the table where the text values for Position (PLANS) are stored, you have to create a text datasource using RSO2 transaction and replicate in BW and load data from the R/3 table.
    Hope this helps you.
    Regards,
    Saravanan.

  • Needed RFC for ESS

    Hi All,
       Currently i'm working on ESS(Employement Self Service). I found all the infotypes needed for my project. But i found only 4 function modules to handle those infotypes. But i need to handle EDUCATION, QUALIFICATION and PREVIOUS EMPLOYEMENT infotypes. For that i need standard RFC's.
       Is there any standard RFC's available to handle these infotypes???? If yes please help me by providing those RFC's.
      Thanks in Advance
      SM Nizamudeen

    Hi JC,
       This is old RFC. But i need new RFC for particular country.
    For example RFC's like "HRXSS_PER_READ_P0002_IN" are used to handle the employees personal data in india.
    Like this i need RFC for education, previous employment and qualification....
    Please revert back ASAP
    Thanks in Advance
    SM Nizamudeen

Maybe you are looking for