RFC Output to an Output Port

Hi,
My application has two nested windows inside a main window. I choose certain selection criterion in one nested window and press submit and certain information is shown in the other nested window.
Second window content is shown only if user presses submit. This is done by passing a flag to the output port which in turn goes to the second window's input.
My requirement is, after user presses submit, I want to call a certain RFC. At the end of the RFC I want to move the control to Output Port.
Submit -> RFC -> Output Port
I can get two lines for the submit. One to call RFC and the other to the output port. But RFC execution needs to be completed first. I am able to connect RFC output to Output port(with some dummy output fields). But its giving an error while deployment.
Thanks.
Srinivas

Hello Srinivas,
The two lines doesn't work. I had a similiar problem, which you described.
Can you post your model? - So that I can have a closer look at the problem? Maybe I have a solution.
Best Regards,
Marcel

Similar Messages

RFC system error: Screen output without connection to user

After running transaction SMWP, we nagivate to the "Parameters for object load management" node using the following path:
Runtime Information -> Adapter Status Information -> Parameters in R/3 Backend(s) -> ECC -> Parameters for object load management
Under the node Parameters for object load management, when we double click any of the entries we receive the following error message in the form of a pop-up: RFC system error: Screen output without connection to user.
Has anyone encountered the aforementioned error?

Hi,
while creating the syncbo you have to give the RFC destination for corresponding Bapi wrappers
so plz check that.
and can you please explain the exact error in detail and add the trace..
Regards
Manohar

Audio output and left USB port is not working!

Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
What happened?
Part No.: Z0JH000TE RS

If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
The newest BIOS is already installed?
Have you removed all USB ports from device manager and restarted your notebook?
If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

How to correlate carmel ASIC output to actual ethernet port?

On a Nexus 5548UP I have a 10G SM port receiving CRC errors but upstream is not sending errors. I think the receiving switch is stomping the CRC, but I cannot match up the output from "show hardware internal" to the actual port to know for sure.
Running this command I can see the ASIC number and port ID:
switch# show hardware internal carmel port ethernet 1/29 | include instance|mac
carmel instance : 3 <- asic ID
mac port : 4 <- port ID
fw_instance : 4
mac status polling : 1
Then I am running this command to check for stomps, but I cannot tell which line(s) of output correspond to the port in question.
switch# show hardware internal carmel asic 3 counters interrupt match stomp
Slot 0 Carmel 3 interrupt statistics:
Interrupt name |Count |ThresRch|ThresCnt|Ivls
-----------------------------------------------+--------+--------+--------+----
car_fi4_INT_fi_rx_pkt_crc_stomp |1 |0 |1 |0
car_fi5_INT_fi_rx_pkt_crc_stomp |bc4d5 |0 |1 |0
car_fi6_INT_fi_rx_pkt_crc_stomp |817d5 |0 |1 |0
car_fi7_INT_fi_rx_pkt_crc_stomp |bc474 |0 |4 |0
car_bm4_INT_norm_igrd_crc_stomp |bc52c |0 |4 |0
car_bm4_INT_norm_egrd_crc_stomp |1 |0 |1 |0
car_bm5_INT_norm_egrd_crc_stomp |bc4d5 |0 |1 |0
car_bm6_INT_norm_egrd_crc_stomp |817d5 |0 |1 |0
car_bm7_INT_norm_igrd_crc_stomp |1 |0 |1 |0
car_bm7_INT_norm_egrd_crc_stomp |bc474 |0 |4 |0
car_fw4_INT_ig_pkt_err_eth_crc_stomp |3e |0 |2 |0
car_fw4_INT_eg_pkt_err_eth_crc_stomp |1 |0 |1 |0
car_fw5_INT_eg_pkt_err_eth_crc_stomp |bc4d5 |0 |1 |0
car_fw6_INT_eg_pkt_err_eth_crc_stomp |817d5 |0 |1 |0
car_fw7_INT_ig_pkt_err_eth_crc_stomp |1 |0 |1 |0
car_fw7_INT_eg_pkt_err_eth_crc_stomp |bc474 |0 |4 |0
car_mm4_pb_INT_buf_ecc_crc_rx_crc_stomp |3e |0 |2 |0
car_mm4_pb_INT_buf_ecc_crc_tx_crc_stomp |1 |0 |1 |0
car_mm5_pb_INT_buf_ecc_crc_tx_crc_stomp |bc4d5 |0 |1 |0
car_mm6_pb_INT_buf_ecc_crc_tx_crc_stomp |817d6 |0 |2 |0
car_mm7_pb_INT_buf_ecc_crc_rx_crc_stomp |1 |0 |1 |0
car_mm7_pb_INT_buf_ecc_crc_tx_crc_stomp |bc474 |0 |4 |0
Done.
Is it as simple as all of the lines above that have '4' in the name (like car_fi4_INT_fi_rx_pkt_crc_stomp) correspond to the port I am concerned with?
I have checked MTU and and cleaned / reseated the fibers on both ends.

An update to my problem. Apparently I misunderstood the concept behind channels and tasks in DAQmx. With the same type of output I could really just have grouped the two channels under the same task. All I had to do was to call the DAQmxCreateAIVoltageChan twice and specifiy the two different output terminals for the two channels. Both of which will be regulated under the same sample clock.
After that I called the DAQmxWriteAnalogF64 function once, specifying the "dataLayout" parameter to DAQmx_Val_GroupByScanNumber, which should output the sample array interleavingly.
The program now outputs two identical waveforms synchronized by the same sample clock.
However the second problem remains. What happens when I want to vary the frequency of the second channel? A simple and obvious solution would be to write and equal number of samples for both channels and just change the value of the sample for the second channel according to the frequency. However this would result in a gigantic array if I have to add more channels later on.
Is there any way around this?
Thank you
Howard

Error in generating HTML output using Central Output Pro Server 5.5

I am getting the following error while generating HTML output using the Output Pro Server. A new printer was created with the Physical Device as "HTML Template Generation - [html]" and added to the Job. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](1801) The printer name is invalid. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3015]Error, unable to open printer. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3008]Error, unable to get info about device 'PAYMENTADVICEHTM.html' attached to port '<nil>'. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](183) Cannot create a file when that file already exists. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [2]Error opening output device/file 'PAYMENTADVICEHTM.html'. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](6) The handle is invalid. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3018]Error ending page on printer. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]Nothing was printed. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [3018]Error ending page on printer.

If I were to guess, I'd guess that your filename is invalid. How about removing all special characters (spaces, brackets, etc.) from the device name. Also, make sure your form was compiled for HTML.
I haven't actually used the HTML driver, but these are general things you should do if you have trouble with any Central driver.
Regards,
Rob McDougall
Indigo Pacific

Output determination and output type?

hi all,
wat is meant by output determination and output type?how and y we use it?
regards,
keerthi

Hi Keerthi,
Output determination is used in message control. You can read more about it here:
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19878343b111d1896f0000e8322d00/frameset.htm
to configure it please use transaction: NACE
best,
Wojciech
please reward points for helpfull answer

Output Types and output determination procedure

Hi All,
What is the output type and output determination procedure for the following:
1) Credit Memo Request
2) Credit Memo
3) Debit Memo Request
4) Debit Memo
Regards
Ashis

Hi Ashis,
As per the standard
1) Credit Memo Request-
Procedure-V10000
Output type-BA00
2) Credit Memo
Procedure-V10000
Output type-RD00
3) Debit Memo Request
Procedure-V10000
Output type-RD00
4) Debit Memo
Procedure-V10000
Output type-BA00
I hope it will help you,
Regards,
Murali.

How to enable "Billing Document- Issue Output To- Issue output to" in VF03

Plz let me know how to Enable "Billing Document --> Issue Output To --> Issue output to" in the VF03 transaction (2nd screen).
After entering the billing doc no. n then pressing enter items will be displayed. Then in the menu bar under "Billing Document" there will be "Issue Output To" option will be there.
Under that again " Issue Output To " & " Screen" options will be there, which by default displayed in disable mode. Is there any option to enable them.

Hi
U need to customize a message type for the billing by trx NACE

PWM output and DIO output on same pin(MultiTasking)

Hi guys, ive encounter some problem in myrio 1900, which is using PIN31 for digital output and PWM output. while the testing , i cant sending PWM, i only can passing the read value from other Digital input and transfer towards PIN 31. ive tried to change in low level logic but myrio disconnect after 3-5 seconds. By the way ive attached few picture to clarify my current situation, hope can clarify my problem clearly.
thank you.
regards
vincent
Attachments:
1.png ‏51 KB
2.png ‏49 KB
3.png ‏49 KB

http://forums.ni.com/t5/Academic-Hardware-Products-ELVIS/bd-p/10

How to address digital input & output, analogue input & output when communicate with mitsubishi fx1n plc

dear all,
i am new to labview, how to code or address digital input & output, analogue input & output when communicate with mitsubishi fx1n plc or crouzet plc.
pls help.
HM

http://search.mywebsearch.com/mywebsearch/redirect.jhtml?searchfor=mitsubishi+fx1n&cb=ZO&p2=%5EZO%5E...
Try the above link. I know it is a screen-full, but is a search result for Matrikon. They have a whole slew of OPC servers/clients you can try out. Personally, I would go with their OPC server for the Mitsubishi, and use Labview Datasockets. That would be the simplest with the lowest learning curve.
Otherwise, if you wish to use Modbus, you would have to get the commands/syntax from Mitsubishi; might be in their user manual, but I wouldn't lay bets on it. With the Matrikon stuff, the syntax is all built in.
Good luck which ever way you decide to go.
Dave

How to set up the output device in output determinatin with customer master

Hi,
I am doing the output determination using customer master and not conditions technique. Can anybody please let me know how to set up the output device . I have done the following:
1) assigned output determination procedure DB00001 to acct group 0001
2) added output type BA00 to customer master documents tab with print as the medium.
3) On creating a sales order and changing it its giving the message
BA00 515 No printer defined for output BA00
Please provide me with some suggestions , how to resolve this issue.
thanx
Jayant

1. tcode V/30 -> check BA00 type -> goto "print" tab -> what's set in the "print param." field?
2. IMG ->SD -> basic functions -> output control -> define print parameters -> V1 output -> for BA00 output type -> Assign a default printer. This is related with the "print param." set in step 1.
For example: if "print parame." is set to '1' in V/30, then the default printer is assigned to sales organization.
You can check F4 search help on the "print param." field (in V/30) to see what options you have.
If you want to specify printer by customer account, you may need to use userexit.
Edited by: Harry Wu on Jun 23, 2010 9:18 AM

How can we Customize output of "PO Output for Communication" Program?

How can We Customize Format of the output of "PO Output for Communication" Program.
Executable is "POXPOPDF" Execution File name is "PoGenerateDocumentCP" which is a java program.
"PO Output for Communication Program" is used to generate DRAFT PO details in pdf Format to go with Workflow Notification for PO Approval.
Regards,
Muhammad Usman

Infact we need to Change Format/data of the pdf file wich comes with Workflow Notification PO "Response Required for PO Approval".
I the pdf file attached is generated by "PO Output for Communication" Concurrent Program.
Executable is "POXPOPDF" Execution File name is "PoGenerateDocumentCP" which is a java program.
This prgram uses the following files to generate pdf output of draft PO output.
DATA FILE:
PO_STANDARD_PO.xml
PO_STANDARD_PO.xsd
TEMPLATE:
PO_STANDARD_XSLFO.xsl
I need to know any visual layout editor available to change contents/layout/data of this pdf.
Regards,
Usman
Edited by: user10518960 on 01-Feb-2013 07:18

Assign the routine against ZY06 output type in output procedure

Hi
I am creating one routine for Tcode VOFM and requirements Output control and I have to assign this reoutin against ZY06 output type in output procedure.Now How can I assign this to output type in output procedure?
Can anyone tell me all procedure.
thanks

hi patel,
chck with this link
VOFM Transaction
Reward with points if it is helpful.
Regards
Alfred

Generate a 12 bit digital output at DAQ output pin

Hi
I have only a little knowledge in Labview
I want to generate a 12 bit digital output at DAQ output pin , from a decimal number. I am using NI USB 6009
Thanks in advance
regards DK

It seems to me that the same question was asked, answered, and marked as solved.
http://forums.ni.com/t5/LabVIEW/Binary-output-at-the-digital-output-pin-as-1111-1111-1111/m-p/249969...

How to read back the output state for digital output or anlog output ?

I use NI-pci 6221(68PIN) Accquistion card to do measurmet,after i do digital output ,or anlog output ,I find that the output will be maitained by the card.even after i exit my accquistion program.But if i reset the card ,the ouptut also will be reset.
Now if i don't reset the card ,how can i read back the output state,?

Hi Mike,
There is no way for you to internally route an analog output to an analog input. The only solution is to physically connect the two lines together with a wire.
I came to this conclusion through the following steps:
1- Start MAX and select the DAQmx device under "Devices and Interfaces>>NI-DAQmx Devices" that you want to internally route signals through.
2- Click on the "Device Routes" tab on the bottom of the right hand window (It defaults to the "Attributes" tab)
3- Line up the Source with the Destination to see if the connection can be internally routed (either direct or indirect)
I came to the above conclusion by following these steps for a PCI-6251 DAQ device (the analog output & input do not exist in the "Device Routes" tab therefore they do not support internal routing), but you should verify this for your specific hardware. Let me know if you have any other questions/concerns.
Cheers,
Jonah Paul
Applications Engineer
National Instruments
Jonah Paul
Marketing Manager, Embedded Software
Evaluate the LabVIEW RIO Platform! - ni.com/rioeval

RFC Output to an Output Port

Similar Messages

Maybe you are looking for