RHINTE30 Merging identical IT0001 records

Hi Experts,
We have RHINTE30 scheduled in the system and we are getting concern on RHINTE30 behavior of merging identical IT0001 records. As by merging, we are loosing history of changes.
Is there a way we can use this report to removing the inconsistency without merging identical IT0001 record.
Thanks
Vaibhav

Hi,
in my opinion is this formation worthless from audit perspective, because they don't know the relevant before/after values.
From from audit perspective the better way is to activate "log data changes" in the technical settings of tables.
Regards
Bernd
Edited by: Bernd Köhn on May 5, 2011 8:56 AM

Similar Messages

Unable to MERGE-Err Msg "MDM Server Failed to Merge the Selected Records"

Hi Friends,
I am using a Match Strategy in the Workflow. In the START Process of the workflow I CHECK OUT the records. In the step MATCH / MERGE when I try to MERGE similar records I get the Error Message "MDM Server Failed to Merge the Selected Records".
But the same step works fine when I dont CHECK OUT (CHECK OUT = NO) the records in the START STEP. But this would not be the right way to do it, as the incoming duplicate records would be visible in the Data Manager by other users even before it is merged.
Your inputs would be greatly appreciated to tackle this problem.
Thanks.

Hi Ravi,
The workflow steps are as follows: (I am on MDM 5.5 and SP 6)
Start (Check Out)   -
> Process -
> Validate -
> Match    (Manual Merge)   -
> Approve----
> Stop    (Check In)
                                                                                The Match and Merge step is a Manual step in the Workflow.
I Check out the records when i start the Workflow and Once the entire process is complete I check in the record. What is happening is that it does not allow me to Merge the records and I get the Error message.
If i dont Check out the Incoming records and run the workflow it Merges fine. But this would not be correct as the Incoming records(whihc could be duplicates) would be visible in the system until they are merged.
Your Input woould be greatly appreciated.
Thanks in Advance.

Merging of same records in column

Hi All,
Can anyone pls tell me how to merge the same records in a column in ALV_Grid and also how to change the names of the column headings in output.
Regards,
Karthik

HI,
its not possible to merge the columns in ALV GRID. you can do it in your internal table by using the 'COLLECT' instead of 'APPEND'. then the same records will be merged.
OR
you can can take sub totals in ALV GRID on any column.
TO change the columns headings use the following.
<b>seltext_l
seltext_m
seltext_s </b>
Regards,
Wasim Ahmed

CS5 - Data Merge - Create Merged Document - Multiple Record - Ignore title/other objects on page?

When I create a merged document with multiple records, the items usually come out right, but the problem is the the title or header of the page is usually also replicated into every line.
Is there anyway to seperate certain objects/images/text/etc so that when I create the merged document (multiple records), it would not duplicate those items?
This tutorial manages to do that:
http://tv.adobe.com/watch/instant-indesign/automating-a-catalog-with-data-merge/
But does not seem to explain how he keeps the title, seperation dots, etc, from duplicating with data merge.
Thanks for any input

I thought I had tried that, but I guess I didn't do it correctly because I just got it to work.
Now I feel silly.
Thanks Peter for your help

When I merge two contact records, some of the email addresses vanish

Most of my contacts have multiple email addresses. When I save a new address from Mail, I often end up with multiple contact records in Address Book for the same person (same name).
When I Merge Selected Cards to merge two of the records, one of the email addresses is erased completely — which, of course, completely negates the value of being able to merge the records. My guess is that it's because the email addresses are all listed as "Work" email addresses, and Address Book can't handle that concept.
Does anyone know a way to make the Merge Selected Cards feature actually merge all of the data?Or at least warn me it is about to erase important data?
Many thanks.

I don't have a mouse with a right click. But found answer on another support thread that works easily for me.
Mail keeps track of all your addresses to whom you sent mail before. In Mail, go under Window then Previous Recipients. Type in the address you want to drop and then click on Remove from List.

Merging of same records in columns while printing

Dear All,
Kindly let me know how to merge same records in a column while printing.
I used ALV_GRID_DISPLAY and merged using sort in LIST but not able to get the same while printing.
Regards,
Karthik

Hi Karthik,
Check this link which deals with printing the Report while creating Report and after execution of the Report.
Path:
BC ABAP PROGRAMMING->ABAP USER DIALOGS->LISTS->PRINTING LISTS.
Link:
<a href="http://help.sap.com/saphelp_46c/helpdata/en/9f/dba54635c111d1829f0000e829fbfe/content.htm">http://help.sap.com/saphelp_46c/helpdata/en/9f/dba54635c111d1829f0000e829fbfe/content.htm</a>
Cheers,
Prashanth

Rhinte30 updation in It0001 failure

Hi All,
Rhinte30 has been scheduled for each night as a background job in production server.
Recently we have noticed that IT 0001 updation is failing for multiple employees.
We did the below checks to investigate :
T77S0 has the needed settings
PLOGI        ORGA        X                  Integration Switch: Organizational Assignment
PLOGI        PLOGI        01                Integration Plan Version / Active Plan Version
PLOGI        PRELU                           Integration: PA update online or batch
PLOGI        SPLIT          X                Integration: New IT 0001 record at name change
SM35 doesn’t have any failure log of those employees so Rhintecheck was executed to get below types of reasons for failure.
Profit center XXXX/XXXXXX does not exist for 01.10.2012
Incorrect job for person XXXXXXXX in period 01.04.2008 - 31.12.9999
Cost center XXXX/XXXXXXX blocked against direct postings on 01.05.2013
Profit center was set to XXXXXX
Incorrect organizational unit for person XXXXXXXX in period 01.10.2008 - 31.12.9999
Incorrect cost center in IT1 for person XXXXXXXX in period 01.04.2008 - 31.12.9999
Incorrect position assignment of person XXXXXXXX in the period 01.10.2012 - 31.12.9999
The CO account assignment object belongs to company code XXXX not XXXX
Experts I need your help in understanding :
1) Can I get a reasoning and corrective step to avoid each of above 8 reasons for failure .
2) If Rhinte30 is executed to update IT 1 position & org units why I ‘m getting errors as :
-Incorrect organizational unit for person XXXXXXXX in period 01.10.2008 - 31.12.9999
- Incorrect position assignment of person XXXXXXXX in the period 01.10.2012 - 31.12.9999 etc

Hi Niti,
Regarding your second question; you may need to run RHINTE10 for newly added org units and positions in OM as they may not be residing in PA tables T528B, T528T, T527X.
All the best,
Dilek A.

More than one records merge into one record

Hi,
I would like to merge multi records into one record.
For example
program_id campus_code
12345 ABC
56789 ABC
56789 EFG
56789 XYZ
98765 XYZ
the output is as follows:
program_id campus_code
12345 ABC
56789 ABC EFG XYZ
98765 XYZ
How can I get this result? Thanks in advance.

Go to asktom.oracle.com and search for stragg
Regards,
Steve Rooney

Tip for Data Merge with Multiple Records (labels, etc.)

I have seen many InDesign Data Merge questions about how to create sheets of mailing labels, especially the problem of getting only one label per page, when you need 30 or more.
Adobe's instructions are poor and incomplete in that InDesign doesn't step out the records from a data source - it steps out the FRAMES that contain the data field placeholders.
That is why you only need to place a text or image frame once on a single page - during the datamerge, InDesign will create the additional FRAMES for each record, and it will create the pages required to hold them.
You do have to set the desired spacing on the
If you create the frame on a Master page, ID allows you to update the data source (when it changes) in the Data Merge tool panel.
These are very nice and robust features, but the documentation for them is confusing to many people.
You will find more great in-depth help for Data Merge, with screen captures and attachments, here in the forum.

For a multiple record merge you need one set of placeholders, then set the margins and spacing in the merge options so the positioning is correct.
Warning: Using Preview in a multiple record merge will corrupt the file. If you press the preview button, Undo after looking at the preview, then merge without using preview.

InDesign mail merge: changing the "record per page" function

I am a new InDesign user and having a problem that I have spent several days trying to correct. Briefly, we are “attempting” to create our product catalog by importing our QuickBooks data (as a csv or txt file).
I think I have isolated the problem to the “records per page” setup.
For whatever reason, when I open the .csv or .txt file (Window > Utility >Data Merge),
From the Data Merge Panel, I am selecting the source file and the “Create Merged Document” box starts.
However, ID is defaulting to one record per page. When I open the Multiple Record Layout tab I get “… optiion disabled because single record is selected…”
I have spent several days reading every post I could find on this and I am going brain dead. Can anyone help me here ?
Thanks in advance for your time and attention.

Hi Jeffrey,
Thank you for taking the time to put the video capture together. Unfortunately, it is hanging up about one-third of the way through...
What it does show is opening a clean sheet, opening Pages, and then opening Data Merge....
As you can see on the two screen shots below, I don't even get the Data Merge option on my Pages dialog...?
So, I'm wondering if I have a problem with my ID install or have some how corrupted a setup or default file.... Hmmmm
Thanks again, appreciate your help.
Message was edited by: Everwood Farm
I re-installed ID - probably didn't need to do this - and deleted the cache and setup files which was the culprit. Now works perfectly .... go figure :-)

Data merge question- multiple records

I am trying to create name tags.
I have a master page set up with 4 name tags and I'm trying to merge my csv file into it.
It is giving me one record per page instead of 4...
Help!
The preview looks correct but upon merge -- it ends up one per page.

Sorry, let me explain:
We sell various items that get imprinted with the customer's info. We imprint on to a preprinted, 4-color "shell" that has multiple pieces. (9 up, 8 up, etc.). We get the shells and we imprint the info. When we print these we group together several shops based on how many they've ordered. Could be from 200 to 5,000+ of one type of product. It's more efficient for the print shop to print more than one shop per sheet than to have to make an entire signature/plate for one shop.
As for the shells coming to us, we have to measure the shells and print a test to make sure it matches up correctly on the press. Then we have to tweak it to make it right. Tweaking means we have to edit the size and placement of each individual box that is the placeholder for the text being imprinted.
The problem I'm finding right now is not only getting the data source right for the merge but I'm now realizing that when I go to create my original merge document, I'm having to manually place the fields on the page for each record. I know that's how it's done normally but when you've got 50 to 200 or more records that's not efficient at all. The reason I'm having to do it that way is I've arranged my data in two rows, including the header and the shop info so that I can have it flow into the document one record per card/calendar.
Wow, that's a lot of typing. OK, am I getting anywhere?

Merge Data Multiple records problem (repeats data)

I'm tring to creat some cataloge pages with 4 images, codes, dicritons etc per page.
i have a excel sheet which I've saved to a CSV file for a data source. i have a single page with the first record at the top and enogh room to repeat the record 4 times on the page. When I do the data merge I'v selected multiple records per page and put in all the settings and spacings I want.
Everything looks fine when i click on the multiple reports prevew but when i do the actual merge most of the merges copy the same data with only a few records using different data. It's generating the correct number of records and pages with 4 records per page but repeatiing the same record,except for 2 records which were different before going back to the repeated record. Also the record it repeats is not the first record on the list, it's about the 6 of 16.
I'm using CS5 version of Indesign.
Any one have any sugestions to get it working corrctly or is this a fault wiyh CS5?

Data SourceBefore MergeDuring mergeAfter Merge Page 1After merge Page 2After merge Page 3
Thanks John seamed to help usiing PNG also made a difference shifting fiiles from our network drive onto personal desktop. As you can see attached are the screen shots.

Modify IT0001 record using dynamic actions

Hello Folks,
I have a requirement to modify the data i.e., P0001-VDSK1=P0001-KOSTL+4(6),
Whenever Coscenter data changes OrgKey also should be updated with same data.
KOSTL     06     0           COST CENTER COPY TO VDSK1--
KOSTL     06     5     P     T001P-MOLGA='21'
KOSTL     06     10     I     MOD,0001/D
KOSTL     06     20     W     P0001-VDSK1=P0001-KOSTL+4(6)
Above code iam able to update Current record only, but it is not updating old records. Please suggest how to update all records also using PSAVE or ..
Any sample code please.
-Nishanth

Hi Nishanth,
If you are not able to solve it through dynamic actions, check with your technical people to implement user exit enhancement PBAS0001 component ZXPADU02.
Br/Manas

Back up and merge identical users on 2 macs

HI There,
I have a mac book pro 15.4 2009. I am getting an 'insurance' MBP pre 2008 so that I am never without a mac should my 1st choice need to go to the menders.
I want my wife to use the 'insurance' MBP to have access to my photos and for light domestic use.
Can I keep an exact clone of my MBP running as a separate user using time machine?
I will not be running both my user accounts simultaneously. Just my 1st choice MBP account and my wifes domestic account on the 2nd MBP. In an emergency, I will simply want to switch macs without losing access to too much recent work. Is this possible by backing up one and restoring to a single user, without effecting my wife's files?
Thanks
Ben

HI There,
[EDIT]
I have a mac book pro 15.4 2009. I am getting an 'insurance' MBP pre 2008 so that I am never without a mac should my 1st choice need to go to the menders.
I want my wife to use the 'insurance' MBP to have access to my photos and for light domestic use.
Can I keep an exact clone of my MBP running as a separate user [ON THE 'INSURANCE' MAC THAT MY WIFE IS USING] using time machine?
I will not be running both my user accounts simultaneously. Just my 1st choice MBP account and my wifes domestic account on the 2nd MBP. In an emergency, I will simply want to switch macs without losing access to too much recent work. Is this possible by backing up one and restoring to a single user, without effecting my wife's files?
Thanks
Ben

Post merging of records in MDM

Dear All
we are merging the records in MDM.Selected 3 records and merged to one new record. In key mapping we have now 3 remote keys corresponding to original records selcted for merging. Now the same information has to be syndicated back to ECC system. Out of the 3 keys available 1 wll be default one which can be syndicated to ECC.
requirement is to send the other 2 records information to ECC where we can initiate the deletion process as well. Please help.
Thanks
Ravi

Hi Ravi,
initially you had 3 records from same systems with 3 different keys as ECC vendor ID is mapped to remote key --> then you merged all the three records into one single record --> now for that one record you have 3 keys pointing to same remote systems but with different remote key values.
- When you merge three different records into one record in MDM,they will have three different Remote Key values,pertaining to their individual local record identification.However they will possess a single Global Key which will identify them as Duplicates.
- When you talking to syndicate data back to ECC,you will face two main challenges
1) Standard ECC tables do not have a separate field to store the global ID send from MDM besides the local id Filed(say Vendor ID).In MDM you can store both the values for the duplicate rec,the local id and the global id,but in ECC you can store only one.
2)In MDM syndicator you have a field in the Source side as Remote Key.This is enabled when you make key mapping as yes in MDM console for that table.Under this field you have two fields <Value> and <Remote System>.The Value field is used to store the local ids of the records and the Vendor Id field in the MDM rep will actually store your global id values.So the View the local ids you will have to map the value field toa corresponding destination field in the std Schema.Which i dont think is present.
So in the case where you use ECC data values to find duplicates.You can identify them but cannot merge and send them back to ECC.
Hope this clears your concept.
Hope It Helped
Thanks & Regards
Simona Pinto

RHINTE30 Merging identical IT0001 records

Similar Messages

Maybe you are looking for