Rhinte30 updation in It0001 failure

Hi All,
Rhinte30 has been scheduled for each night as a background job in production server.
Recently we have noticed that IT 0001 updation is failing for multiple employees.
We did the below checks to investigate :
T77S0 has the needed settings
PLOGI        ORGA        X                  Integration Switch: Organizational Assignment
PLOGI        PLOGI        01                Integration Plan Version / Active Plan Version
PLOGI        PRELU                           Integration: PA update online or batch
PLOGI        SPLIT          X                Integration: New IT 0001 record at name change
SM35 doesn’t have any failure log of those employees so Rhintecheck was executed to get below types of reasons for failure.
Profit center XXXX/XXXXXX does not exist for 01.10.2012
Incorrect job for person XXXXXXXX in period 01.04.2008 - 31.12.9999
Cost center XXXX/XXXXXXX blocked against direct postings on 01.05.2013
Profit center was set to XXXXXX
Incorrect organizational unit for person XXXXXXXX in period 01.10.2008 - 31.12.9999
Incorrect cost center in IT1 for person XXXXXXXX in period 01.04.2008 - 31.12.9999
Incorrect position assignment of person XXXXXXXX in the period 01.10.2012 - 31.12.9999
The CO account assignment object belongs to company code XXXX not XXXX
Experts I need your help in understanding :
1) Can I get a reasoning and corrective step to avoid each of above 8 reasons for failure .
2) If Rhinte30 is executed to update IT 1 position & org units why I ‘m getting errors as :
-Incorrect organizational unit for person XXXXXXXX in period 01.10.2008 - 31.12.9999
- Incorrect position assignment of person XXXXXXXX in the period 01.10.2012 - 31.12.9999 etc

Hi Niti,
Regarding your second question; you may need to run RHINTE10 for newly added org units and positions in OM as they may not be residing in PA tables T528B, T528T, T527X.
All the best,
Dilek A.

Similar Messages

Position is not updating in IT0001 : HCM Forms & Process

Hi Experts,
I am doing the TRANSFER Process(Standard process ORG_CHANGE) . My workflow is completeing successfully without any error.But the new position is not getting updated in IT0001.
Does anybody know why this is happening?
Thanks & regards,

Hi Mukesh,
Thanks for the response.
Can you tell me the IMG path where I need to check if the position field is editable? When we use PA40, position is anyways editable.
We are using an Adobe Interactive Form in the case of our portal based HCM P&F Transfer process.
The workflow works fine but the change in position is not getting reflected in IT0001. Do we need to do something to ensure this happens? The position field has been mapped to IT0001-PLANS.
Regards,
Teja

Cost center assignment to Position not updated in IT0001 Org Assignment

Hello,
I have assigned Cost centers to all Positions (A011) in IT1001 through PP01 from 01/01/2011.
Now when I see IT0001 in PA30, most of the employees have the updated IT0001 with cost center from 01/01/2011. But few employees have multiple IT0001 records past 01/01/2011.
e.g. there are 2 records for IT0001 for particular employee.
1. from 02/01/2011 - 12/31/9999
2. from 01/01/2011 - 01/31/2011
For these employees, cost center is not updated in IT0001 Org Assignment. I tried running RHINT00 and RHINT30 reports but didn't help.
Please guide, which report tp run to solve this issue.
Thanks in advance.
Madhu

Mr.Fun,
for these employee rerun the action with the same date.
and chek.
some of the table entries are not projected perfectly.
If you rerun the action it will fills that if not the check the cost center assignment to the position done perfectly r not.
it is advised to assign cost center to the Org.Unit. instead of no. of positions.
system automatically considers for all the positions in that org.unit.

8.2.4 Acrobat update cause print failure

Once 8.2.4 update installed on Vista Enterprise PDF printing no longer works. All applications error out. Ran the Adobe fix command and rebooted. Printing still fails.
Is there an easy way to roll back to the previous version?
Are there any plans by Adobe to quickly release another patch?
Any other ideas on how to correct?

ssieg_goblue wrote:
we are receiving an Access Denied on our Windows XP machines when printing to the Adobe PDF printer sub system since this update... our Acrobat 8 plug-in for Office2007 is working fine though... Anyone else with similar behavior?
On my Vista system even the Office2007 plug-in fails with similar print driver failures. I have even tried running Microsoft Word 2007 as administrator without success.

Aperture 1.1 update still a failure.

Dear group members:
After purchasing Aperture as soon as it came out and realizing how plagued the application was with problems, I decided to set it aside and simply forget it. I contacted Apple and the Apple store where I purchased the software in an attempt to have a refund for my purchase but it was all in vain.
I don't wish to beat on a dead horse as I believe it has now become clear that Aperture's release was premature and everyone realizes that Aperture still has quite a long way to go before it can even remotely be considered a professional application.
Now the subject has resurfaced as Aperture's price has been lowered and Apple announced the 1.1 version of Aperture available for download.
In an attempt to behave in a open-minded fashion I downloaded the update to see if it could bring welcome improvements to Aperture and transform it into a useable application. I was very disappointed to learn that no sigfinicant changes have been made and Aperture remains a failure.
I am running Aperture on my Powermac G5 dual 2.0 GHz processor with (2) internal 400 GB hard drives, (2) external 500 GB hard drives, (2) external 1 TB hard drive, 2.5 GB RAM, OS X 10.4.6 and an Apple 23" Cinema display. Configuration can't be the reason why Aperture performs so poorly. After updating Aperture to the latest version I tried to import my iPhoto library and was actually able to do it although the process seemed to have taken forever and the photos I have stored in the iPhoto library were all taken with a point-and-shoot 3.3 megapixel Olympus camera that can hardly be considered as a Pro camera. Then I tried to import several folders containing RAW images produced by my 6 megapixel Nikon D70 SLR digita camera (approximately 25 folders) and at this point the process seemed so slow I had to quit and start the process again since I didn't know if it was normal for the application to take that long or if there was a problem.
Performance has not been improved and I can't believe this is how this application is supposed to perform on a machine as fast as mine. Never mind trying to run it on my Powerbook G4 17". It becomes so slow it is impossible to work with it.
How can such a "Pro" application perform so poorly ? After all this time is this the best Apple can do with this application ? The company has had some 6 months now to have these bugs fixed and improved the application's performance but it is still a disaster. Despite the recent price reduction Aperture remains an expensive application that claims to address the needs of professional photographers when in reality no professional photographer would consider it seriously in light of its performance issues as well as many flaws.
(Interesting thing is that I run Adobe's Photoshop, Bridge and Camera Raw trio and they all perform just fine. I often have all three running simulatenously and together they still perform way better than Aperture running alone. How can this be ?)
Aperture has a very interesting and even pleasant user interface. I believe the application holds a lot of promise but Apple has to take its development a little more seriously and show a little more respect for its consumer base. The product was released prematurily and not enough time was spent on its development. Adobe has taken the right approach with Lightroom and has released the software as a free beta download so users can try and provide suggestions and feedback to help the company improve it until it is ready to be released. Why didn't Apple do the same ?
In all it is a shame what customers such as myself have gone through with Aperture and how Apple chose to handle the issue. The development team responsible for Aperture should be dismissed and replaced by software designers that actually know what they are doing and have enough experience with photography to create a truly professional application.
Apple should learn from this episode that it shouldn't rush to release a new product before it is really ready just for marketing's sake.
Aperture can become a very interesting product - not one to compete with such a mature application as Photoshop but one to manage the digital workflow and replace both Adobe Bridge and Adobe Camera Raw. But in order for this to happen the Application will have to be redesigned from the ground up and it will have to focus on serious core issues such as library model (no proprietary library), excellent RAW conversion, reliable metadata tools and management and many other features that professionals simply can't work without.
Are all of you having the same disappointing experiences with the performance of version 1.1 ?
Best regards,
Joseph Chamberlain

Hello,
yes, you are right. I agree, 1.1 is a modest update. There is lot too improve, I think. But I want to offer some thoughts.
On 1. You got iView? Than your aperture library is accessable to you. iView can look into Aperture´s library which is in fact a package full of folders. Every master image resides in its own folder. This is only a workaround and takes time. I fear, Apple never intended to create another archival tool. Aperture is more of a workflow power horse.
On 2. Offline Archiving is not neccessary when you organize your Harddrive Archive thoughtfully. Look inside Peter Krogh´s Dam Book about Digital Asset Management for Photographers http://www.thedambook.com/. He suggests a folder structure with folders as big as your smallest Backup-media, 4 GB for DVDs. Name those folders DVD_06-04-18 and burn each folder on its own DVD. This way your harddrive folder structure is similar or equal to your offline archive. Works great.
On 3. Apple decided not to alter RAW files at all. This has its limitations but is the most secure choice. I like to insert metadata with iView too because it is comfortable.
5. Please see my reply at 1.
6. Agree. And user custom presets with automatically filled in IPTC fields (copyright notice, photographer, contact etc.) like iView offers would be great.
7. Agree a lot.
I would add faulty Webtemplates and a still needed better RAW conversion.
But besides all that - I would say, Aperture is a great addition to my workflow.
kind regards, eberhard

OS 5.0.1 Update Causing SIM Failure?

I updated my OS 5.0 to the new 5.0.1 yesterday and ever since I get these messages "SIM Failure". My phone goes to "No Service" and I have to turn the phone off and back on again to get service. Is anyone else having trouble with this and, if so, does anyone know if there is a fix?

Good news. There is a fix. I had the same problem since the 5.0.1 update. Phone techs - including level 2 - knew nothing about it. But at my local Verizon store a manager did have SIM failure information in his database. He undertook a fix which seems to have solved the problem. He explained the error has to do with (non)activation of the SIM card when the phone was first set up. It was not activated at that time. When 5.0.1 searched for an activated SIM card, because it was not activated earlier, the error message appeared. The manager activated the SIM card this morning and the problem has not occurred again today.

RHINTE30 Merging identical IT0001 records

Hi Experts,
We have RHINTE30 scheduled in the system and we are getting concern on RHINTE30 behavior of merging identical IT0001 records. As by merging, we are loosing history of changes.
Is there a way we can use this report to removing the inconsistency without merging identical IT0001 record.
Thanks
Vaibhav

Hi,
in my opinion is this formation worthless from audit perspective, because they don't know the relevant before/after values.
From from audit perspective the better way is to activate "log data changes" in the technical settings of tables.
Regards
Bernd
Edited by: Bernd Köhn on May 5, 2011 8:56 AM

Unable to Update, Transient resolver failure

Hi All,
I am new to Arch, though not that new to Linux:)
I have installed arch succcessfully .
But i get a bunch of Transient resolver errors when i try to pacman -Syy.
the out put looks like this:
error: failed retrieving file 'core.db.tar.gz' from archlinux.mirrors.uk2.net : Transient resolver failure.
This gets repeated for extra and community and for all these repos the errors keep repeating for all the mirrors i have updated in the pacman.d/mirrorlist
The final errror is failed to synchronize any databases
1) Trying to update pacman says that it is uptodate.
2) etc/hosts is correct . i can ping local host. and my hostname.
3) networking is fine as long as i can ping with IP address and my other computers are able access the net. so i am not sure where i am wrong.
4)my etc/rc.conf shows the following
MOD_AUTOLOAD="yes"
eth0="eth0 10.0.3.9 netmask 255.255.255.0 broadcast 10.0.3.255"
INTERFACES=(eth0)
gateway="default gw 10.0.3.1"
ROUTES=(gateway)
DAEMONS=(syslog-ng network netfs crond)
also please note that i am using the latest ISO
i have already followed the following threads in this forum
http://bbs.archlinux.org/viewtopic.php?id=47066
http://bbs.archlinux.org/viewtopic.php?id=43152
but my situation is not resolved.
Any help is greatly appreciated.

supposed to be a space in the second nameserver (2. 45)????
Sorry my bad.. no it is not supposed to be.
Can u ping an IP address??? See if u can bypass the DNS part and make a difference. Can u ping a local networked computer?
Yes i can ping my gateway and DNS in internal network
1) You are wanting a fixed IP? You have it set up that way but thought I'd check...
2) Does someone have to approve individual computer network access at your office? I have had that at several places of work.
Yes i cant have a DHCP
Yes they need to. But it is already approved. In fact this is a dual boot machine. i have FreeBSD 6.3 running on this machine and it can happily access all the websites.
Can you dig google.com?
i Cant . dig gives command not found is dig not installed in the base installation? ( i guess not ,by this)
Thanks again

New Install Win 7 w SP1 - Windows Update 100s of failures

I reinstalled Win 7 with SP1 on a PC. The first batch of a billion windows update results in 3 successful installs and about 100 or more failed ones... with 200 plus Updates waiting for me to say "ok"
This is an overwhelming amount of failures.. just wtf is going on with this crap?

i took the IT Superhero quiz, and it made me a girl! so i tried retaking it until i got what i wanted, and finally, i just decided to reverse engineer their logic answers! it ended up being (somewhat) simple, and yet tricky to decipher, and so i decided to share my findings here at the Water Cooler to anyone in a similar predicament as me :Di highly recommend taking the quiz FIRST to see what you get (it IS rather fun), but once that is out of the way, feel free to have fun (i know i did). and don't forget to use your avatar if you like it!so basically, you just take the address of the Superhero quiz:
http://community.spiceworks.com/careers/sysadminday/superhero-quizand add the appropriate keys after it. for example:...

Lenovo update causes startup failures

I just used the Lenovo update and now my W520 throws several failures on boot. It also caused a BSOD. Specifically my W520 is running Windows 7 and I get popups saying "There was a problem starting C:\Program The specified module cannot be found." it also says "You cannot install an older versio of Bluetooth software over a newer versino ... [-349].
Also PC Doctor won't run and the system BSOD whn I attempt to connect an external monitor. All this after I updated using the Lenovo update.
HELP!!!!

Welcome to Lenovo Community, rcarbis. Thank you for sharing your experience. This may indeed help others.
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

2.0 Update. Successes, Failures, How did go for you?

Well I'm still waiting, so I have to ask before I take the plunge.
Has anyone had a successful update to 2.0, and if not what happened? If it went well, what did you notice, still have spinning Beach balls? . . . Inquiring minds want to know.

At the risk of alienating our PC friends (Yes, I'm one to) I notice a pattern here. Seems the only successful update to 2.0 occurred on a Mac based computer, all the PC's (so far) have had failures.
Not intended to slam Windows users but an interesting coincidence.
Any consolation I have 3 Win based PC's and just recently defected to the Mac camp with the new iMac.
My iTunes and library are set up on the Mac so I guess I will see if I brick my iPhone and iPod Touch today or not.

EFI Update 2.1 failure

I applied the EFI 2.1 Update to my quad core macbook pro (running snow leopard). I followed the instructions to the letter. I heard the system reboot and when I looked up, I was greeted with a nice, white, blank screen. This blank screen does not go away with time. The keyboard is non-responsive. The unit will power down if the power button is held. A restart results in the same blank, white screen.
Upon initial installation I did reformat the drive using the apple disk utility to give me a case sensitive, journaled drive. I did not change the partition map.
Any one have any thoughts before I call support?

Sorry folks,
I left out a very important bit of info. I'm running Checkpoint Full Disk Encryption (FDE). According to other threads on the net, the 2.1 EFI modifies the FDE image...which of course is a bad thing. Also according to info on the net, I'll need to update to Checkpoint FDE v3.3.2 which is a recently released patch that supports EFI v2.1 Happily, I have recovery file so I can recover the content from my crypt'd drive.
Thanks TeenTitan for the helpful response.

Updating the IT0001 field Legal Person

Hi All,
I cant able to make any screen modification in the field Legal Person... Even if i update the field by means of using the FM HR_INFOTYPE_OPERATION its not updating.
Please provide me a solution how can i update that field.
Thanks
Yogesh

Hi,
Thanks for your reply. But i have use the same code for updating the field SACHP for that i can able to make it. but when i try to update this Legal Person ID alone its not updating.
Can you Provide the solution
Thanks
Yogesh

CS6 Update & RAW Converter failure

CS6 update - error message U44MIP7? And cannot activate downloaded RAW converter for Nikon D610?

Please confirm your Ps & ACR version from Help->About Photoshop and provide us with the following logs.
You can find them at:
PS & ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]

Maverick Update Fail (Disk Failure) - Read this

So, I was trying to update my macbook pro to OS X Mavericks and it said " The OS X upgrade couldnt be started because the disk is damaged and cant be reparied. After your computer restarts, back up your data, erase your disk, and try installing again".
I was quite scared as this is my work laptop and had 450GB of data. I didnt had a spare hard disk (atleast not with 450GB) space.
So I went to apple store and talked to someone at genius bar who said data will be lost - we will install new image of lion @150 pounds. Walked into another store to talk to another techie same result. So went home.
While i was reading discussions forums on apple I kept trying to install and it kept failing and installing;. After 21 attempts is succeded. No back up data - no installing new image - no restoring. It took me 2 hrs but i got it done without all that hassle.
What I observed was that slowing the time remaining to install went from 44 to 42 to 41 to 39 in various install, so as far as you notice time reducing its worth trying it 20-30 times. In the final sucessful attempt it went to 34 mins and then again up to 1 hr and 8 mins but it finally worked. Sigh!!
MAcbook Pro ( July2011)
Hope this helps.
P

"Seems to me Apple should fix the problem at no charge to us since it appears it is a software problem they created!!!"
Really? So then all 2nd Generation Nanos using iTunes 8.2.1 have this problem? Oh no Mr. Bill!!!!!
Let me go check my Product Red Nano 2nd Generation since I am running the latest iTunes. Standby
Standby
Standby
Standby
Standby
Nope, hit play, screen is working fine, everything is OK. You scared me there for a minute. That Nano is my alarm clock with my Zeppelin. Glad there isn't a software bug. Or else mine would have a white screen also. Much more likely that it is:
1. A battery problem or
2. A logic board problem or
3. An LCD screen problem
If you are attached to yours you can send it to http://www.iresq.com and let them diagnose it, or use Google to find other 3rd party repair sites.

Rhinte30 updation in It0001 failure

Similar Messages

Maybe you are looking for