RMAN backups does not match its retention policy

Hello,
I have couple of PROD instances on Windows environment with 11.2.0.3 DB version. RMAN retention policy is set to 14 days but I have noticed that backup is showing longer than that.
For example: LIST BACKUP OF DATABASE whows backups since 13th October. I also checked backup pieces at netapp share and they are present.
DELETE NOPROMPT OBSOLETE do not remove anything as expired backup.
I have clear retention policy and set to 14 days again but does not seem to work.
I would appreciate suggestion(s) regarding the strange issue.
Thanks a lot.
Best Regards

John-MK wrote:
Hello,
I have couple of PROD instances on Windows environment with 11.2.0.3 DB version. RMAN retention policy is set to 14 days but I have noticed that backup is showing longer than that.
For example: LIST BACKUP OF DATABASE whows backups since 13th October. I also checked backup pieces at netapp share and they are present.
DELETE NOPROMPT OBSOLETE do not remove anything as expired backup.
I have clear retention policy and set to 14 days again but does not seem to work.
I would appreciate suggestion(s) regarding the strange issue.
Thanks a lot.
Best Regards
We would need to know what kind of backups and when they were taken. Consider this scenario:
retention policy of 7 days.
Incremental level 0 backup taken on Sundays
Incremental level 1 backups taken Mon through Sat.
Let's say Oct 1 is a Sunday, so we take an inc-0 backup on Oct 1, and again on Oct 8.
Now let's say we are at Oct 10. Our 7 day retention policy dicatates that we be able to recover to any day back to Oct 3.
The only way we can recover to Oct 3 is to begin with that inc-0 backup from Oct 1.
All recovery begins with the last inc-0 backup prior to the point in time to be recovered. In a normal, regularly cycling schedule of backups, you will actually end up with backups 1 day short of being twice as old as your retention period.
Let's take a more extreme example. Same 7-day retention period, but after a single inc-0 backup, you don't take any more backups for 3 months. That one single backup is still needed to enforce your recovery window, and so is not obsolete, despite the fact it is 3 months old and your recovery window is only 7 days.
Also, you mention 'expired'. In terms of oracle backups, 'expired' is not the same as 'obsolete'.
"Obsolete" means 'no longer needed to enforce recovery policy'.
"Expired" is a bit more complex.
when a backup is taken, or an archivelog is written, a record of that is written to the repository. when you do an rman 'crosscheck', those repository records are compared to reality -- to see if the recorded backup file or archivelog file actually exists. Maybe someone used an OS command to delete them. Any file found to have 'gone walkabout' have their repository records marked as 'expired'. An rman 'delete expired' then removes those records from the repository.

Similar Messages

RMAN - specification does not match any archived log in the repository

Hi All,
Oracle 11G R2 on WIndows woo8 R2 Std Edition
I am running RMAN (almost for the first time), and i am using a script previously used. As i am checking through the log, i notice some 'errors' though the backup finishes successfully.
RMAN> crosscheck archivelog all;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=352 device type=DISK
specification does not match any archived log in the repository
RMAN> crosscheck backupset;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCNNF_TAG20130423T134331_8QFL24F7_.BKP RECID=16 STAMP=813505412
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T134334_8QFL26K1_.BKP RECID=17 STAMP=813505414
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCNNF_TAG20130423T134423_8QFL3S48_.BKP RECID=18 STAMP=813505465
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T134427_8QFL3V9J_.BKP RECID=19 STAMP=813505467
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NNNDF_TAG20130423T134428_8QFL3XDT_.BKP RECID=20 STAMP=813505469
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_NCSNF_TAG20130423T134428_8QFM4C5S_.BKP RECID=21 STAMP=813506507
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=D:\ORACLE\DATABASE\ORADATA\MMSPRD7\ORAFRA\MMSPRD7\BACKUPSET\
2013_04_23\O1_MF_ANNNN_TAG20130423T140148_8QFM4DOT_.BKP RECID=22 STAMP=813506508
Crosschecked 7 objects
RMAN> crosscheck copy;
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=352 device type=DISK
specification does not match any datafile copy in the repository
specification does not match any control file copy in the repository
specification does not match any archived log in the repositorySo there are 2 instances of the errors:
1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
Thx in advance!

1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
specification does not match any archived log in the repositoryI don't see the error here, it's only a msg that mean : There is no files on XXX destination, which is normal when no files found.

RMAN-20242: specification does not match any archive log in the recovery ca

Hi,
I'm working with an 9i Oracle RAC (yes, I know this version is out of support...). I'm launching my backup from node 1 with this script
run {
sql 'alter system switch logfile'
sql 'alter system archive log current'
allocate channel TSM1 type 'sbt_tape' connect *
parms='ENV=(TDPO_OPTFILE=/home/adsmadm/rman_INF01T01/opt/tdpo.opt)'
allocate channel TSM2 type 'sbt_tape' connect *
parms='ENV=(TDPO_OPTFILE=/home/adsmadm/rman_INF01T01/opt/tdpo.opt)'
backup
format 'brman_arch_%s_%p'
(archivelog like '/logs/bbdd/oracle/INF01T01/archiver/%' channel TSM1 delete input )
(archivelog like '/logs/bbdd/oracle/INF01T03/archiver/%' channel TSM2 delete input )
release channel TSM2
release channel TSM1
And fail with this error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 08/13/2012 22:36:43
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20242: specification does not match any archive log in the recovery catalog
I've take a look to the archives directories and both nodes have archives:
ora10g:/opt/ora10g > ls -lrt /logs/bbdd/oracle/INF01T01/archiver
total 97896
-rw-r----- 1 ora10g dba 2048 Aug 13 22:36 T0001S00000061440648489222.ARC
-rw-rw---- 1 ora10g dba 38132224 Aug 13 22:36 T0001S00000061430648489222.ARC
-rw-r----- 1 ora10g dba 11984896 Aug 13 22:36 T0002S00000044040648489222.ARC
ora10g:/opt/ora10g > ls -lrt /logs/bbdd/oracle/INF01T03/archiver
total 392984
-rw-r----- 1 ora10g dba 49364992 Mar 24 2009 T0002S00000007020648489222.ARC
-rw-r----- 1 ora10g dba 49364992 Mar 25 2009 T0002S00000007030648489222.ARC
-rw-rw---- 1 ora10g dba 19314688 Mar 25 2009 T0002S00000007040648489222.ARC
-rw-rw---- 1 ora10g dba 4733952 Mar 25 2009 T0002S00000007050648489222.ARC
-rw-rw---- 1 ora10g dba 4608 Apr 09 2009 T0002S00000007440648489222.ARC
-rw-rw---- 1 ora10g dba 2541056 Sep 26 2009 T0002S00000015420648489222.ARC
-rw-rw---- 1 ora10g dba 49373184 Sep 28 2009 T0002S00000015430648489222.ARC
-rw-rw---- 1 ora10g dba 3410432 Feb 11 2010 T0002S00000018680648489222.ARC
-rw-rw---- 1 ora10g dba 599552 Feb 12 2010 T0002S00000018710648489222.ARC
-rw-rw---- 1 ora10g dba 6574080 Mar 03 2010 T0002S00000019200648489222.ARC
-rw-rw---- 1 ora10g dba 1663488 Mar 08 2010 T0002S00000019340648489222.ARC
-rw-rw---- 1 ora10g dba 431104 Apr 07 2010 T0002S00000020160648489222.ARC
-rw-rw---- 1 ora10g dba 13811712 Apr 19 2010 T0002S00000020460648489222.ARC
I've tried to made a crosscheck but, only found node1 archives:
RMAN> change archivelog all crosscheck;
validation succeeded for archived log
archive log filename=/logs/bbdd/oracle/INF01T01/archiver/T0001S00000061430648489222.ARC recid=10685 stamp=791246196
validation succeeded for archived log
archive log filename=/logs/bbdd/oracle/INF01T01/archiver/T0001S00000061440648489222.ARC recid=10686 stamp=791246196
validation succeeded for archived log
archive log filename=/logs/bbdd/oracle/INF01T01/archiver/T0002S00000044040648489222.ARC recid=10687 stamp=791246197
Crosschecked 3 objects
Any idea about the way to solve it?
Thanks in advance!
dbajug

Hi,
Connect to target through rman
crosscheck archivelog all;
Then re run the backup. This will work if those two locations provided are archive log destinations.
In case the issue still persists then
Connect to target through rman
catalog start with '/logs/bbdd/oracle/INF01T01/archiver/';
catalog start with '/logs/bbdd/oracle/INF01T03/archiver/';
Then re run the backup.
Thanks,
Vivek
Edited by: 952807 on Aug 16, 2012 5:21 PM

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040

Please assist I am on a Windows 7 64 bit machine I have VS 2010 and have been fighting with this new program that I was brought on to help with - Issue is that I am unable to get rid of this issue. There is so many solutions but none have worked. If someone can give me some help with what has worked for you.
The error is Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
This is with CR installed on 64 bit.
Thank you very much for any assistance with this problem,
Kris

Hi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

I have a Black i-phone 5, iOS 7 on a black phone is horrible, there should be a darker setting for black phones... it look horrible on a black phone because it does not match... its too bright... I think there should be a darker option!!

I have a Black i-phone 5, iOS 7 on a black phone is horrible, there should be a darker setting for black phones... it look horrible on a black phone because it does not match... its too bright... I think there should be a darker option!! Is there going to be a darker option of the software???

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================

Hi Glen，
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen

Restoring a backup! "Blackberry ID on device does not match"

hi,Im facing an issue and Im sorry if this topic has been discussed in before as I could not spot it out anywhere/could not find the right solution.I was facing an issue of "other data" to be filled up with 11 GB unnecesarily on my Z10,so i read some blogs and support forums which guided me to wipe my device and remove any unnecesary applications or sideloaded apps which i have never installed or used. (just fyi) As soon as i took my backup and did a security wipe ,i tried to use the same blackberry id which I had been using previously all this while,but at first it said my password was wrong,all right i can agree that i must have forgotten my password which I mostly tend not to agree to;Why? because all my passwords are same related to this email id/blackberry ID of mine.Moving on,I reset my password using internet explorer and going to the link blackberry provided and thankfully I was over that.But another issue just rised,i could not see any of my data restored,such as app world apps,my contacts,bbm contacts or anything for that matter.Secondly,when i try to restore my backup file it says "the blackberry id on the device does not match" ;whereas the ID on my PC and my z10 is exactly the same.I need urgent help please,i would be really glad as my phone is as good as a nuked bb where I cannot do my daily business tasks or chat or do anything.Any help would greatly be appreciated,thanks

I have exactly the same stupid problem! it isso anoying, worst is this isnt even my device it is a clients backup in my shop!! is there no solutionto this??? Please blackberry we need some support here!

CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
Jeremy

I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck!

Need help urgently!! - "The selected file cannot be linked because its type (video) does not match t

Hey guys... I need your help!! I started a project using Premiere Pro 2 and was 80% when I formatted my computer (all my project files were always saved to a external hard drive). Anyways instead of installing Premiere Pro 2, I installed Premiere Pro Cs3. Problem is whenever I try starting up my project it asks me to link every file used. When I do this it says "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." I took my external harddrive to friend's house who has Premiere Pro 2 and it says the same thing. Why did this happen? Is there anyway around it... Any help would be greatly appreciated, I put over 20 hours into editing this movie... I don't want it all to go to waste.

Frequently answered question
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Created policies does not match except Global Acces Policy

Hello,
I'm having an issue with our IronPort C160 web proxy. When I create new access policies and use one identity created by me,
the policy does not match even the user matches the identity used in this access policy. The user falls under Global Access Policy.
Model: S160
Version: 7.1.1-027 for Web
Any idea ? Any AsyncOS bug ?
Best Regards,

Hello Jaki,
First of all thank you for your reply. I have tested also using no authentication but it's the same thing. Now I'm noticing even the right Identity does not match, and the user always match the default identity.
Please have a look to the file containg the access logs.
I have tried with a user named test3 for a website that fall under the category Dating (www.eharmony.com). Normally the user should match TestPolicy policy and the page should be blocked but it does not and fall under default policy that allow the page to be viewed by the user.
It seems a thing very easy to configure and I don't know why it does not function. Maybe that I have to do any other configuration :S ?
Best Regards,
Ilir

Brrestore RMAN-20242: specification does not match any archived log in the repository

Dear all,
When trying to restore arvhive logs which are taken through netbackup with the following command brrestore -a se1-seqLast=path like in the image attached . It fails with the following image:

1) crosscheck archivelog all - when the error happens here, i think this means that there are no archived redo logs in the archivelog destination?? ..or something to that nature.
2) crosscheck copy - not sure what the other errors mean here.
specification does not match any archived log in the repositoryI don't see the error here, it's only a msg that mean : There is no files on XXX destination, which is normal when no files found.

"specification does not match any archived log in the recovery catalog"

I would like to know about this message.
I Validated my backup and archivelogs yesterday.
Today when I tried to do - CROSSCHECK ARCHIVELOG ALL;
I gave me the following error -
RMAN> crosscheck archivelog all;
released channel: ORA_SBT_TAPE_1
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=291 device type=DISK
specification does not match any archived log in the recovery catalog
when I tried to list all the archivelogs then also I am getting this message -
RMAN> list archivelog all;
specification does not match any archived log in the recovery catalog
I have retention policy of 15 Days.
Waiting for your inputs.

Thanks Werner..This means that it is just a message.
One more question related to Archive Log backups -
traditionally DBAs used to take backup of an Archivelog by spupplying "alter system archive log current" before taking the backup. somewhat like -
run
allocate channel t1 device type 'sbt_tape' PARMS="ENV=(TDPO_OPTFILE=/oracle/TESTDB/tdpo.opt)";
sql 'alter system archive log current';
backup archivelog all delete input;
release channel t1;
But, since RMAN automatically archives CURRENT redo log at the start of the archivelog backup, do we REALLY need to pass sql 'alter system archive log current'; before starting the archivelog backup in the script?
RMAN> backup archivelog all;
Starting backup at 11-MAR-10
current log archived ===========> RMAN automatically archived the CURRENT redo log
released channel: ORA_DISK_1
allocated channel: ORA_SBT_TAPE_1
related question to this is - Since it generates one archived log everytime it takes the archived log backup, this backup may get hung if the archived destination is 100% full. Is there any way we can take the archive log backup without generating an extra archived log before the start of the backup?
Thanks,
Roopesh

The name on the security certificate is invalid or does not match the name of the site" : IE

Hi All,
All clients are getting “the name on the security certificate is invalid or does not match the name of the
site” when its reboot and try to access website.
I don’t have idea about certificate authority. Can anyone help on how I start troubleshooting this.
Is there any group policy setting which resolve this issue.
Please suggest what parameter I have to check.

> All clients are getting “the name on the security certificate is invalid
> or does not match the name of the site” when its reboot and try to access website.
"View Certificate" should tell you.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

SQL Query - The number of columns specified in "SQL Query" does not match t

I am creating new UDM for tablespace alert, below is my query,however its failing with error
SQL Query - The number of columns specified in "SQL Query" does not match the value specified in "SQL Query Output"
I selected Metric type is number
SQL Query Format : Two columns
Query:
SELECT d.tablespace_name,round(((a.bytes - NVL(f.bytes,0))*100/a.maxbytes),2)
used_pct FROM sys.dba_tablespaces d,(select tablespace_name, sum(bytes) bytes, sum(greatest(maxbytes,bytes)) maxbytes from sys.dba_data_files group by tablespace_name) a,(select tablespace_name, sum(bytes) bytes from sys.dba_free_space group by tablespace_name) f
WHERE d.tablespace_name = a.tablespace_name(+) AND d.tablespace_name = f.tablespace_name(+)
AND NOT (d.extent_management = 'LOCAL' AND d.contents = 'TEMPORARY');
Any clues why i am getting error.

SQL> SELECT d.tablespace_name,round(((a.bytes - NVL(f.bytes,0))*100/a.maxbytes),2) used_pct
2 FROM sys.dba_tablespaces d,(select tablespace_name, sum(bytes) bytes, sum(greatest(maxbytes,bytes)) maxbytes from sys.dba_data_files group by tablespace_name) a,(select tablespace_name, sum(bytes) bytes from sys.dba_free_space group by tablespace_name) f
3 WHERE d.tablespace_name = a.tablespace_name(+) AND d.tablespace_name = f.tablespace_name(+)
4 AND NOT (d.extent_management = 'LOCAL' AND d.contents = 'TEMPORARY');
TABLESPACE_NAME USED_PCT
MGMT_TABLESPACE .82
SYSAUX 1.52
UNDOTBS1 .32
RMAN .02
CORRUPT_TS 10.63
USERS 0
SYSTEM 2.26
MGMT_ECM_DEPOT_TS .04
MGMT_AD4J_TS 0

RMAN backups does not match its retention policy

Similar Messages

Maybe you are looking for