RMAN job failed

HI,
I am having issue during databaseFUll backup through RMAN. Below is error msg.
RMAN> RMAN>
new incarnation of database registered in recovery catalog
starting full resync of recovery catalog
sql statement: alter system checkpoint global
Edited by: 867328 on Jul 29, 2011 7:31 AM

867328 wrote:
I scheduled RMAN job in crontab to take database backup. I received a msg says that backup failed and that msg.Since you decide to not share with us what you actually do or the specific error message, no assistance is possible now.
Is COPY & PASTE broken for you?

Similar Messages

RMAN Backup job fails after changing sys, system passwords

Hello Oracle community,
11.1g
After we changed the passwords for sys, system and sysman the backup jobs fails. this is my error log:
Recovery Manager: Release 11.1.0.7.0 - Production on Mo Aug 30 11:16:29 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-12532: TNS: Ungültiges Argument
RMAN>
Echo einstellen ein
RMAN> set command id to 'BACKUP_MEGALON.INT_083010111617';
Befehl wird ausgeführt: SET COMMAND ID
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: Fehler bei set Befehl auf 08/30/2010 11:16:29
RMAN-06171: Nicht bei Zieldatenbank angemeldet
RMAN> backup device type disk tag 'BACKUP_MEGALON.INT_083010111617' database;
Starten backup um 30.08.10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: Fehler bei backup Befehl auf 08/30/2010 11:16:29
RMAN-06171: Nicht bei Zieldatenbank angemeldet
RMAN> backup device type disk tag 'BACKUP_MEGALON.INT_083010111617' archivelog all not backed up;
Starten backup um 30.08.10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: Fehler bei backup Befehl auf 08/30/2010 11:16:29
RMAN-06171: Nicht bei Zieldatenbank angemeldet
RMAN> exit;
Recovery Manager abgeschlossen.
Ikrischer

Hello Tychos,
I am able to make a sqlplus connection, but your hint send me in the correct direction. I had a special character "@" in the password and I think that was the reason for my problems with RMAN.
Ikrischer

RMAN backup fails using OEM with no output error

I am trying to do a weekly automatic full backup of a database in noarchivelog mode using RMAN in Enterprise Manager. Every time I submit the backup job (even if I try to do an immediate backup) the job fails almost immediately. When I Iook at the job output for the failed attempt, it says that there is no output for the job. I believe I have all of the preferred credentials and priveleges correct. Does anyone have any ideas as to what the problem could be or maybe where I can find an error log for rman to get a better explanation of the error?
Thanks

please check in metalink.....
you find useful informations here:
RMAN backup using Oracle Secure Backup fails with ORA-19511 (sbt__rpc_connect)
Doc ID: Note:396046.1
Best Regards,
Shishir Tekade.
My Blog: http://shishirtekade.blogspot.com

RMAN job very slow

Oracle 9i, patch set_04,two node fail safe cluster.
I have set up, with OEM, a RMAN job in order to backup the databaase of approx 20GB.
I use RMAN with a recovery catalog.
The job run for about 4 minutes, so very good performance I think.
Now something change and the job run for about 27 minutes, the db is always the same and the job is still succesfull.
What can you suggest in order to come bak to the previous perfomance?
Where do I hava to investigate?
Please advise.
Best regards.

Same result:
Here is the output of RMAN:
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to target database: ORAPROD1 (DBID=1115130655)
RMAN>
connected to recovery catalog database
RMAN>
RMAN> configure device type disk parallelism 4;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 4;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN> **end-of-file**
RMAN>
Recovery Manager complete.
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to target database: ORAPROD1 (DBID=1115130655)
RMAN>
connected to recovery catalog database
RMAN>
RMAN> run {
2> allocate channel Canale1 type disk format 'U:\orabck\oraprod1\backup_%T_%s_%p.BAK';
3> backup
4> ( database include current controlfile );
5>
6> backup ( archivelog all delete input );
7>
8> }
allocated channel: Canale1
channel Canale1: sid=100 devtype=DISK
Starting backup at AUG 18 2004 16:38:32
channel Canale1: starting full datafile backupset
channel Canale1: specifying datafile(s) in backupset
including current controlfile in backupset
input datafile fno=00012 name=T:\ORADATA\ORAPROD1\GECOTI2K_GEN.ORA
input datafile fno=00010 name=T:\ORADATA\ORAPROD1\GECOTI2K_TAS.ORA
input datafile fno=00008 name=T:\ORADATA\ORAPROD1\GECOTI2K_CAB.ORA
input datafile fno=00001 name=T:\ORADATA\ORAPROD1\SYSTEM01.DBF
input datafile fno=00011 name=T:\ORADATA\ORAPROD1\GECOTI2K_IDX_GEN.ORA
input datafile fno=00014 name=T:\ORADATA\ORAPROD1\GECOTI2K_IDX_TAS.ORA
input datafile fno=00015 name=T:\ORADATA\ORAPROD1\GECOTI2K_IDX_CAB.ORA
input datafile fno=00013 name=T:\ORADATA\ORAPROD1\GECOTI2K_IDX_MUL.ORA
input datafile fno=00002 name=T:\ORADATA\ORAPROD1\UNDOTBS01.DBF
input datafile fno=00009 name=T:\ORADATA\ORAPROD1\GECOTI2K_MUL.ORA
input datafile fno=00016 name=T:\ORADATA\ORAPROD1\GECOTI2K_CONTA.ORA
input datafile fno=00017 name=T:\ORADATA\ORAPROD1\GECOTI2K_IDX_CONTA.ORA
input datafile fno=00007 name=T:\ORADATA\ORAPROD1\XDB01.DBF
input datafile fno=00004 name=T:\ORADATA\ORAPROD1\INDX01.DBF
input datafile fno=00006 name=T:\ORADATA\ORAPROD1\USERS01.DBF
input datafile fno=00003 name=T:\ORADATA\ORAPROD1\DRSYS01.DBF
input datafile fno=00005 name=T:\ORADATA\ORAPROD1\TOOLS01.DBF
input datafile fno=00018 name=T:\ORADATA\ORAPROD1\IAB_TS.ORA
channel Canale1: starting piece 1 at AUG 18 2004 16:38:33
channel Canale1: finished piece 1 at AUG 18 2004 17:06:58
piece handle=U:\ORABCK\ORAPROD1\BACKUP_20040818_377_1.BAK comment=NONE
channel Canale1: backup set complete, elapsed time: 00:28:25
Finished backup at AUG 18 2004 17:06:58
Starting backup at AUG 18 2004 17:06:58
current log archived
channel Canale1: starting archive log backupset
channel Canale1: specifying archive log(s) in backup set
input archive log thread=1 sequence=324 recid=412 stamp=534532023
channel Canale1: starting piece 1 at AUG 18 2004 17:07:04
channel Canale1: finished piece 1 at AUG 18 2004 17:07:07
piece handle=U:\ORABCK\ORAPROD1\BACKUP_20040818_378_1.BAK comment=NONE
channel Canale1: backup set complete, elapsed time: 00:00:04
channel Canale1: deleting archive log(s)
archive log filename=U:\ORARCHIVELOG\ORAPROD1\ORAPROD1_00324 recid=412 stamp=534532023
Finished backup at AUG 18 2004 17:07:07
Starting Control File Autobackup at AUG 18 2004 17:07:07
piece handle=U:\ORABCK\BACKUPCTRLFILE\C-1115130655-20040818-00 comment=NONE
Finished Control File Autobackup at AUG 18 2004 17:07:10
released channel: Canale1
RMAN> allocate channel for maintenance device type disk;
allocated channel: ORA_MAINT_DISK_1
channel ORA_MAINT_DISK_1: sid=100 devtype=DISK
RMAN> delete obsolete device type disk;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 4
Deleting the following obsolete backups and copies:
Type Key Completion Time Filename/Handle
Backup Set 5557 AUG 15 2004 19:57:51
Backup Piece 5558 AUG 15 2004 19:57:51 U:\ORABCK\ORAPROD1\BACKUP_20040815_366_1.BAK
Backup Set 5582 AUG 15 2004 19:58:03
Backup Piece 5583 AUG 15 2004 19:58:03 U:\ORABCK\ORAPROD1\BACKUP_20040815_367_1.BAK
Backup Set 5657 AUG 16 2004 19:58:21
Backup Piece 5658 AUG 16 2004 19:58:21 U:\ORABCK\BACKUPCTRLFILE\C-1115130655-20040816-01
deleted backup piece
backup piece handle=U:\ORABCK\ORAPROD1\BACKUP_20040815_366_1.BAK recid=359 stamp=534281405
deleted backup piece
backup piece handle=U:\ORABCK\ORAPROD1\BACKUP_20040815_367_1.BAK recid=360 stamp=534283082
deleted backup piece
backup piece handle=U:\ORABCK\BACKUPCTRLFILE\C-1115130655-20040816-01 recid=366 stamp=534369501
Deleted 3 objects
RMAN>
RMAN> **end-of-file**
RMAN>
Recovery Manager complete.
Any other idea?
Thank you very much for your time.

ERROR VNIC creation job failed

Hello All,
I have brought oracle VM X86 manager into ops center 12c control. When I try to create a new virtual machine it is throwing the ‘ERROR VNIC creation job failed’ error. Can anybody throw some light over this issue.
Thanks in advance.
Detailed log is
44:20 PM IST ERROR Exception occurred while running the task
44:20 PM IST ERROR java.io.IOException: VNIC creation job failed
44:20 PM IST ERROR VNIC creation job failed
44:20 PM IST ERROR com.sun.hss.services.virtualization.guestservice.impl.OvmCreateVnicsTask.doRun(OvmCreateVnicsTask.java:116)
44:20 PM IST ERROR com.sun.hss.services.virtualization.guestservice.impl.OvmAbstractTask.run(OvmAbstractTask.java:560)
44:20 PM IST ERROR sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
44:20 PM IST ERROR sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
44:20 PM IST ERROR sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
44:20 PM IST ERROR java.lang.reflect.Method.invoke(Method.java:597)
44:20 PM IST ERROR com.sun.scn.jobmanager.common.impl.TaskExecutionThread.run(TaskExecutionThread.java:194)
Regards,
george

Hi friends
I managed to find the answer. Internally it is has some indexes in the data base level. It still maintains the indexes in the shadow tables. Those all need to be deleted. With our Basis team help I have successfully deleted those and recreated the indexes.
As Soorejkv said sap note 1283322 will help you on this to understand the scenarios.
Thank you all.
Regards
Ram

Hi Post Upgrade Job Failing

HI All,
We have recently done the Upgrade from BW 3.1 to BI 7.0
There is a issue regarding the POST Upgrade
One Job is failing every day
The name of the JOB is BI_WRITE_PROT_TO_APPLLOG
And the Job log is
06/18/2008 00:04:55 Job started                                                          00           516          S
06/18/2008 00:04:55 Logon of user PALAPSJ in client 200 failed when starting a step      00           560          A
06/18/2008 00:04:55 Job cancelled
                                                       00           518          A
This Job is actually running the program
RSBATCH_WRITE_PROT_TO_APPLLOG
when i try to run this program with my user id its working
but with the other user id which it is schedule its failing giving the messages as mentioned in the job log
Kindly suggest me
REgards
janardhan K

Maybe it's a dialog and no system or background user. so the job fails.
Regards,
Juergen

Background job failing

Experts,
We have background job running as part of the daily load. The user who created and scheduled the job, his account diabled recently and that makes job failing. I need to keep that job running but can not figure out how to change the user name in the job. For example, 0EMPLOYEE_CHANGE_RUN job based on event 'zemployee' triggers at the end of employee data load. Can you please provide any hint what should I do to change user name or take the ownership to keep this job running. Thanks.
Regards,
Nimesh

Hello,
Go to SM37--> put job name "0EMPLOYEE_CHANGE_RUN" and user as "*" to get all users.
Now select the job with released status>(Menu)Job>change->Steps-> select 1st row > change(pencil icon)>now you see the user name here.
Change the user name to the user name used for all background job and save.
Done.
Happy Tony

How can i run a executable right after a rman job has run?

How can i run a executable right after a rman job has run?
I have a rman job that execute every night. The backup is local.
I want to have a duplicate of the backup on another machine.
I want the executable to sync the directory to execute right after the rman backup.
How can i do this using the job scheduler?
Normaly, i would configure rman to run the backup on both location. But im having trouble with rman regarding this:ORA-600 [2103] on RMAN Backup to NFS mounted file system

Hi,
If the rman job is in fact a Scheduler jobs (appears in the dba_scheduler_jobs view) then you can create a second event-based job that runs after the rman job (and set the raise_events attribute for the rman job).
Instructions are here
Create Event based job
Hope this helps,
Ravi.

Error in Control Framework: Background job failed

Hi Experts,
One background job failed with job log: Error in Control Framework in ECC 6.0 system; the job is supposed to produce a XML report. Can anyone please give some idea on this why it could happen? One SAP note 893534 has described same kind of issue but in CRM system. That note even cant be implemeneted in ECC 6.0. Any workaround? Is it a BASIS issue here?
Thanks & Regards,
SKB

Hello,
please check the variant. We had this problem, and when checking the variant I got a shortdump because the variant did not fit to the program (there were problems with subscreens in the selection screen). After adjusting the variant with program RSVARDOC_610 the variant was ok.
I can not check if this solved the problem because the job runs weekly, and the next job is on Monday. But give it a try...
HTH,
Jens Hoetger

User, Role, Profile Synchronization Job Fails

Hi Gurus,
When I am scheduling a job the User, Role, and Profile Sync. job fails giving an error
"Cannot assign a java.lang.String object of length 53 to host variable 5 which has JDBC type VARCHAR(40)."
This happens when the synchronization happens with a portal system. We dont have a ruleset for the portal system, So if I put in a "*", it includes this system and results in the error, If I manually select all other system, it works fine. Is there any way to remove this error so that I can schedule the jobs without having to select every system manually.
Regards,
Chinmaya

Hi,
As per my knowledge, in the Portal system, you should perform only user sync. Roles/profile sync will not work since portal will have workset roles.
Please refer SAP Note 1168120, which may help you to understand the limitations
Hope this helps!!
Rgds,
Raghu
Edited by: Raghu Boddu on Nov 4, 2010 7:39 PM

Code in before report getting executed but "Job error is: BIP job failed."

Customer is executing a BIP job that fires a pl/sql procedure via before report trigger. Procedure is completing successfully. But the BIP report is not getting generated. ESS process ends in error with the following error:
oracle.as.scheduler.ExecutionErrorException: ESS-07033 Job logic indicated a system error occurred while executing an asynchronous java job for request 604103. Job error is: BIP job failed.
     at oracle.as.scheduler.rp.AsyncFinalizeProcessor.processFinalizeRequest(AsyncFinalizeProcessor.java:131)
     at oracle.as.scheduler.rp.AsyncJavaSysExecWrapper.finalizeExecution(AsyncJavaSysExecWrapper.java:250)
     at oracle.as.scheduler.rp.EndpointProcessor.finalizeExecute(EndpointProcessor.java:1018)
     at oracle.as.scheduler.rp.EndpointProcessor.finalizeExecuteWrapper(EndpointProcessor.java:980)
     at oracle.as.scheduler.adapter.EndpointImpl.finalizeExecute(EndpointImpl.java:561)
     at oracle.as.scheduler.ejb.EssAppEndpointBean.finalizeExecute(EssAppEndpointBean.java:162)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy197.finalizeExecute(Unknown Source)
     at oracle.as.scheduler.ejb.ESSAppEndpoint_t596cy_MDOImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.MDOMethodInvoker.invoke(MDOMethodInvoker.java:35)
     at oracle.as.scheduler.ejb.ESSAppEndpoint_t596cy_MDOImpl.finalizeExecute(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.invokeFinalizeExecute(RequestProcessor.java:8133)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.execStage_Finalize(RequestProcessor.java:7331)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.process_execute(RequestProcessor.java:4813)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.dispatchHandler(RequestProcessor.java:2833)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.processExecuteEvent(RequestProcessor.java:696)
     at oracle.as.scheduler.adapter.ra.rdp.RequestProcessor.processUpdateEvent(RequestProcessor.java:1345)
     at oracle.as.scheduler.adapter.ra.WorkUnitWorkerBase.processWork(WorkUnitWorkerBase.java:199)
     at oracle.as.scheduler.adapter.ra.WAWorker.run(WAWorke...
Any tips/pointers on possible issues? Could this be a template corruption?

Any reply for the above error please.I do have the same issue.
Please suggest.

Report Job failed when Bursting is used in BI Publisher 11.1.1.5

The Report Job failed when Bursting is used.
error message:
[INSTANCE_ID=aimedap1s.1347261753557] [OUTPUT_ID=1421][ReportProcessor]Error rendering documentoracle.xdo.servlet.scheduler.ProcessingException: [ReportProcessor]Error rendering document
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.renderReport(BurstingReportProcessor.java:455)
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.onMessage(BurstingReportProcessor.java:127)
at oracle.xdo.enterpriseScheduler.util.CheckpointEnabl
the reproduce steps :
1. Create a Bursting query in the Data Model
2. Create Report Job with the option
"Use Bursting Definition to Determine Output & Delivery Destination" enabled
3.Schedule the report Job
4. run the report and found the status of it is problem, the error message above can be found.
*Note:not all the report job failed when bursting is used, in step1 when set OUTPUT_FORMAT as PDF,HTML,RTF,PowerPoint 2007,
the report will be run successfully,but when set other OUTPUT_FORMAT that list in the following document, the report can not run successfully.
http://docs.oracle.com/cd/E21764_01/bi.1111/e18862/T527073T555155.htm
Adding Bursting Definitions>>Defining the Query for the Delivery XML
>>OUTPUT_FORMAT
Can anyone give some advice on how to troubleshooting it?
Looking forward for your reply
Regards

Hello vma.
I happened to find the solution on 11.1.1.3. With xdo-server.jar, you can use DataProcessor class.
For details and sample source code:
http://blog-koichiro.blogspot.com/2011/11/bi-publisher-java-apigenerate-pdf-with.html
* Not sure if it works on 11.1.1.5 though, I hope this gonna help you.

After Applying 11.1 PSU4/5 the Cognos Enterprise Planner Job fails

We have recently applied Oracle 11.1 PSU5 to our Dev environment. The Application is IBM Cognos Enterprise Planner 8.4 version. The import_queue_tidy job fails with NO ROWS returned. If we use the new DLL to retry within 5 seconds, the job succeeds.
Error Number: -2147220665
Line Number: 220
Description: Unable to get Job Item
The Job management step failed. An attempt has been made to mark the 'IMPORT_QUEUE_TIDY' Job as CANCELLED. Please rectify the problem and re-create a similar Job.
No rows returned by statement
SELECT jobitemguid, identifier, jobitemstateid, sequence FROM indemplwf.P_JOBITEM WHERE jobguid = '{6C44B8D4-AD8F-45E6-9405-EA25E7C2C37F}' ORDER BY sequence
when executed on connection created with connection string of
Provider=OraOLEDB.Oracle;Data Source=****;User ID=******;Password=*********;
See the log file for further details.
After we retry the job succeeds. This error is happening only after we applied the patches. Has any one seen this happening?
The wierd thing is we cannot reproduce this error, it happens randomly. The error didn't happen until 5th run. We had same exact issue when we applied PSU4 and due to schedule conflict we had to rollback. Not sure how to track this issue down. Any help is appreciated.
Edited by: user1260385 on Jan 12, 2011 2:24 PM
Edited by: user1260385 on Jan 12, 2011 2:29 PM

Thanks for Responding Sri.
Yes I did. Just thought to check with the community if they have seen such issues and any idea as to how to troubleshoot this.

SQL Server Agent Job Failing on Job Step

Hi,
Firstly, apologies if this post has been made in the wrong group. Running SQL Server 2012. I'm attempting to add a SQL Server Agent Job which calls a stored procedure that sends a Database Mail message. The SQL Server and SQL Server Agent
both run under the NT AUTHORITY\NETWORK SERVICE account. The Database Mail service has been enabled, and a public profile created. When running the stored procedure manually, I receive no errors - everything runs as expected and I do receive an
email containing the expected information.
I've created the job, job step, job schedule, attached the schedule to the job, and assigned the job to server, all using T-SQL without error. I've also enabled the mail profile on the SQL Server Agent, and I know that part is working because when
the job fails, I get an email notification of the failure.
I've checked the command text in the job step and parsed it within the SQL Job Step Edit window to confirm, it shows as parsing correctly. However, when I manually run the job itself, I get the following:
Execution of job failed. See the history log for details.
I check the history log and it shows:
[474] Unable to refresh Database Mail profile Database Mail Profile. (reason: ) (Not a typo, the history log shows no reason)
[260] Unable to start mail session.
[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
The command text on the failing job step is as follows:
DECLARE @date [varchar](10)
SET @date = CAST(GETDATE() AS [varchar](10))
EXEC [dbo].[GetExceptions]
@company = 'MyCompany',
@checkDate = @date
With regard to the date value being passed as varchar: This stored procedure is used to check for exceptions against multiple databases on this server (hence the company parameter) via dynamic SQL. I'd much prefer to use proper data typing but this
is the only way I could get it to work.
Does anyone have any suggestions on anything else I could check, or insights into why this is failing? Any help is greatly appreciated!
Best Regards
Brad

I am not sure if this really helps but I would do follow the below steps:
1. make sure sql server agent has database mail enabled(rigt click on server agent--properties--alert system--enable database mail and choose right profile.) and RESTART THE SQL SERVER AGENT.(i know you said it i working, but sometimes, restart the
sql server agent might fix)
2. check agent error log and check if any error messages.
3. run the command text you mentioned in sql server and see if it is working.(i know you said it is working but just to make sure).
4. make sure sql server agent service user has permissions to run database mail in msdb. check this https://msdn.microsoft.com/en-us/library/ms186358.aspx
5. Check the output from select * from msdb.dbo.sysmail_log and if it says anything
6.it does not look like the job log is getting truncated but to make sure, get the job step output to a text file.to do this, edit the job step and on the job step properties click on advanced, enter path to the output file. this will give the complete
output for the step.
Hope it Helps!!

Background jobs failing with ABAP/4 processor: RFC_CONVERSION_FIELD

Hi Guru's,
Below are the backgroud jobs failing with runtime Error " ABAP/4 processor: RFC_CONVERSION_FIELD" in solution manager system (solution manager 3.0,SR2). Not sure why all these jobs failing with this dump on of sudden. i haven't made any changes to the system in the recent past.
BTC_CMS_COLLECTOR
SAP_APPLICATION_STAT_COLLECTOR
SESS_Y000001806_COLL_TRANS
ABAp Dump says that
Conversion error between two character sets
What happened?
Conversion error "ab_rfccon" from character set 4103 to character set 1100.
When executing a remote function call a conversion error occurred. This
occurred when receiving or sending the data. The conversion error can
only appear, when the data is transferred from a Unicode system to a
non-Unicode system.
Could some one please share some information if any one experienced the issue. Please note that all of our ECC systems are uni-code systems.
Thanks & Regards,
Vinod.

Hi Vinod
Just try to understand the purpose of these jobs and may be these Notes will help you
Note 814707 - Troubleshooting for RFC connections Unicode/non-Unicode
Note 647495 - RFC for Unicode ./. non-Unicode Connections
Note 1361970 - Conversion problems during RFC communication

RMAN job failed

Similar Messages

Maybe you are looking for