RMAN not recognizing tape

I configured OBS to recognize the tape drive (PowerVault DAT72 100T) without a library. It is recognized when I ping it inside the OBS configure tool.
When I use RMAN in EM to test tape backup, it fails with the message below. The key to failure might be the last message 'no preauth config found.' I did set up Preauthorized Access in the Admin user. What else could this message mean?
RMAN-00571:
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS
RMAN-00571:
RMAN-03009: failure of backup command on oem_sbt_backup channel at 12/28/2006 13:00:54
ORA-19506: failed to create sequential file, name="20i636o4_1_1", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_cat_query: Query for piece 20i636o4_1_1 failed.
(Oracle Secure Backup error: 'no preauth config found for OS user (OB tools) SYSTEM').

Hi I am getting the following error message when i am trying to take DB backup using OSB with RMAN script
RMAN> run {
2> allocate channel oem_sbt_backup type 'sbt_tape' format '%U';
3> backup as BACKUPSET current controlfile tag '11202008104814';
4> restore controlfile validate from tag '11202008104814';
5> release channel oem_sbt_backup;
6> }
allocated channel: oem_sbt_backup
channel oem_sbt_backup: sid=143 devtype=SBT_TAPE
channel oem_sbt_backup: Oracle Secure Backup
Starting backup at 20-NOV-08
channel oem_sbt_backup: starting full datafile backupset
channel oem_sbt_backup: specifying datafile(s) in backupset
including current control file in backupset
channel oem_sbt_backup: starting piece 1 at 20-NOV-08
released channel: oem_sbt_backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on oem_sbt_backup channel at 11/20/2008 22:53:13
ORA-19506: failed to create sequential file, name="08k075qo_1_1", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_cat_query: Query for piece 08k075qo_1_1 failed.
(Oracle Secure Backup error: 'no preauth config found for OS user (OB tools) oracle').
Please help me how to fix the issues as i could see in the thread that you were able to solve this problem ....

Similar Messages

Bottom Part of 17" Trackpad not recognizing taps

When I put my finger on the bottom part of the trackpad and drag horizontally, the pointer on the screen doesn't move. While keeping my finger on the trackpad and then if I drag it up on the trackpad, the pointer will start to move. If I were to start with my finger on the upper part of the trackpad and then drag it down to the area where the pointer wasn't moving, it will continue moving. This tells me that there is a software issue where the trackpad isn't registering an initiating tap on the bottom of the trackpad. I'm hoping there is a way to reset something that will make it work. Anyone else having this problem on the new 17" Unibody MacBook Pros?

Hi Ayman,
My 15" is exactly the same. I think the previous poster is correct. The trackpad is designed this way because many people like to rest their thumb on the bottom of it and not have the cursor effected. To my knowledge there is no way to change this behavior.
--Travis

Mini-DV footage does not import into IMOVIE/ Camera not recognized

Sony Mini DV tapes do not import footage using firewire. Camera is not recognized. I have done all the troubleshooting suggested. unplug, plug in, turn on, off, etc. I have bought new firewires and tried to import with many different mini-dv camcorders, sony, panasonic. It worked before, but not now.
I teach in a multiple mac computer lab and have 20 computers, non of them import, although they did earlier. Student-use film lab. HELP!

Hi Harm,
Yes, that's exactly what I do with my EX3 footage too - ignore the XML error messages. That's a bit buggy in it's own right, well, not buggy but it should really recognise the EX folder/file structure and ignore the XML files - maybe one for a feature request!
The 350 is a great camera - very much more sensitive and lower noise than the EX3.
I still like the EX3 though, as it's small and light (relatively!) - the 350 is very light though in comparisson to other shoulder mount cameras. Nice low power consumption too
Some things I miss from the EX3 - like the joystick menu button and the direct edit of parameters on the VF that the EX3 has. I also like the EX3 picure profile system over the 350 way of storing profiles (more similar to the 700 I believe).
Cheers,
Paul.

Yoga 2 Pro touchpad not recognized as precision touchpad on Windows 10

Hi all, I was really delighted to see Synaptics drivers being available for the Yoga 2 Pro for Windows 10 on your site yesterday. However, I am really confused to see that the Yoga 2 Pro touchpad is not recognized as a precision touchpad. Does the hardware not allow it or is it Synaptic's fault or what else? I'd really love to have these settings: http://twitter.com/Daniel_Rubino/statuses/617023404911239168The Synaptics driver you provide doesn't allow me to change what happens when I tap with 3 fingers (btw, Cortana isn't activated by your driver anyway - it simply doesn't work) and I'd like to select by myself what should happen when I swipe with 3 fingers. Why do you stick to the Synaptics driver settings, if it's integrated into Windows 10? Thanks for any help and best regardsSebastian

Also, 3 finger tap doesn't trigger Cortana over here... Please integrate the touchpad into Win 10 settings and let Windows handle all the stuff.

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

My daughters iPod touch (4th gen and 4 months old) is not recognized by iTunes (PC) or our stereo docking station, but it will charge. Other devices (iPhone and another touch) work fine on PC and stereo. What is wrong??

We have an iPod touch 4th generation (4 months old) that is charging on our PC but is not recognized by iTunes. It is also charging on the docking station of our stereo but is not recognized by the stereo (will not play music). Other devices (2 other iPod touches and an iPhone) are recognized by both the PC and the stereo. What could be wrong with this particular iPod touch??

What are the model iPods and iPhone and iOSs that work?
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple l
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
The following may result in in the inability to regain full use of the iPod if iTunes does not see the iPod
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My iphone 5 can't tethering to my mac by cable, because it's not recognized as connected, someone knows how to fix it?

My iphone 5 can't tethering to my mac by cable, because it's not recognized as connected, someone knows how to fix it?

Is the device reasonably well changed and active on the same Wi-Fi network?
If you need to connect the USB cable wrap the end of the USB connector in some thin tape to stop it getting caught or use a USB extension cable.
tt2

SONY HDR XR150 - Camcorder is not recognized by iMOVIE

Dear all:
_I own the Sony HDR XR150 camcorder and cannot get my MAC to recognize that my camcorder is connected._
I have a Mac laptop Powerbook G4 and am running OS X version 10.4.11. I have iMOVIE 6.03 (267.2).
When I am in iMOVIE the camcorder is not recognized. :[
It states "No camcorder attached" even when I have small Firewire cable running from camcorder to larger firewire cable plugged into MAC. My footage on camcorder is on hard drive. I have no idea if the footage was taped in a certain format and I mention this because there are lots of formats written about in this forum - I just assumed everything was recorderd in HD. I simply hit record on camcorder to tape footage. When connected, I click on a button on camcorder for USB connect that uses the Internal Hard Drive (where my footage is). However, my camcorder is not recognized on iMOVIE.
I am worried that the problem is I do not have an Intel based Mac. The software that came with Sony camcorder called PMB (Picture Motion Browser - only works with Windows.)
This is what I dug up online.
Tapeless Camcorder Support
iMovie '09 works with many tapeless camcorders that record to flash memory, a hard disk drive (HDD), or DVD media. These devices use a USB 2.0 cable and include camcorders using MPEG-2 (standard definition), MPEG-4, AVCHD, and H.264 formats. If you use the AVCHD format you will need a Mac with an Intel-based Core Duo processor or better.
Due to the wide range of media types, and the different ways manufacturers store video on these media types, not all tapeless camcorders are compatible with iMovie '09.
NTSC Camcorders
PAL Camcorders
http://support.apple.com/kb/ht3290
*CAN ANYONE CLUE ME IN AS TO HOW TO GET MY SONY CAMCORDER TO BE RECOGNIZED IN IMOVIE?*

My friend just wrote this to me as a possible solution...
It doesn't surprise me that AVCHD is only supported on Intel machines. Apple tends to stop updating older products/software in favor of their newer lines. To their credit, high compression HD codecs are processor intensive, and older hardware would have a hard time with it.
The camera may have some alternate options for video file type... Check the manual or help docs. Unfortunately, that could mean SD recording rather than HD.
I DON'T KNOW IF MY FRIEND'S INFORMATION MIGHT HELP SOMEONE GIVE ME SOME EVEN BETTER IDEAS AS A SUGGESTION. AVCHD is a high-def video format that allows HD camcorders and some digital cameras to record video at resolutions up to 1920 x 1080. SOUNDS LIKE MY FRIEND IS SAYING IF I DON'T RECORD IN HD ON MY SONY CAMCORDER MAYBE MY IMOVIE WILL BE COMPATIBLE WITH IT. BUT MY IMOVIE DOES NOT EVEN RECOGNIZE MY CAMCORDER... SO I DON;T THINK HIS SUGGESTION WILL WORK...
SUGGESTIONS?

DVDs Are Not Recognized

I updated my PowerMac (2.0GHz G5, 3GB RAM, LaCie dual-layer DVD burner) to 10.5.6. I tried burning a DVD (copied from a VHS tape and converted to a VIDEO_TS folder, and burned via Toast), and everything was fine, but it crashed halfway through burning the DVD. That's happened before (ever since switchig to Leopard), but not recently. So, I put in another DVD+R and the same thing happened. So, I restarted the machine, and now it won't even recognize that there's a disk in the drive.
So, I powered down and restarted the machine and the same thing happens. I also tried DVD+R DL, and they're not recognized, either. I haven't tried putting in a DVD movie yet, though.
Any ideas?
TIA

Thanks for the replies.
I tried to mount blank DVD-R and DVD+R discs with sudo mount /dev/sr0 /mnt/CD.
I keep getting the answer: mount: no medium found on /dev/sr0.
On some discs it returns with:
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
but I have not been able to find a pattern for when it will do this.
I ran smartctl -T permissive -i /dev/sr0 with a disc in the drive and got this response:
=== START OF INFORMATION SECTION ===
Vendor: MATSHITA
Product: DVD-RAM UJ-832
Revision: 1.00
Device type: CD/DVD
Local Time is: Fri Jan 31 06:18:51 2014
device Test Unit Ready [medium or hardware error (serious)]
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
Temperature Warning: Disabled or Not Supported
My first thought is that the two thinkwiki pages that I posted have links to firmware updates far past 1.00. However, I still can't tell which drive I have.

Canon Gl2 Video Camera Not Recognized with Firewire 800 Connection

I have a late 2010 mac with 2.93 Ghz Intel Core i7 Processor with 12GB DDR3 running 10.8.2 OSX. I have a Canon GL2 video camcorder with a MiniDV tape I am trying to download to my computer. I am using a new 4pin to 9pin Rocketfish Firewire 800 cable. My computer is not recognizing the firewire input from the GL2. As suggested with other support threads, I have tried to turn the mac and computer off and on, as well as check to see if the cable is working. I have also tried both a trial version of Final Cut, and Imovie 09 which is loaded on my Mac, neither of which will recognize the camera. I clicked on the System Information icon and looked at the Firewire 800 status which was:
FireWire Bus:
Warning: Unable to list FireWire devices.
Maximum Speed: Up to 800 Mb/sec
At least I know it recognized something. I have also checked to make sure the Canon is set to DV-Out on the Menu. Since I am unable to use a USB connector with MiniDV, would there be any other way to either A) Download the video to the computer, or B) get the Mac to recognize the source plugged into the Firewire? Any help with this would be excellent.

I believe that in order to be recognized, you have to start the process from within iMovie of Final Cut; as for your FW port, you can try these two different troubleshooting steps (may or may not work, but won't hurt):
Reset SMC:
http://support.apple.com/kb/HT3964
PRAM:
http://support.apple.com/kb/HT1379
It may that your FW port is defective; it that turns out to be the problem, I hope you purchased Applecare because those ports are an integral part of the logic board, so that would have to be replaced ($$$).
Since your footage is on DV tapes, you do need the FW to transfer it or it will not work. One other (involved) way would be to transfer your footage to a DVD if you have a DVD recorder and then get it on the Mac from there.

4.1.2 Update not recognizing headphones

I upgraded to 4.1.2 and now the phone is not recognizing when headphones are plugged in. I'm tried several headphones that all work on other devices. I've also ensured that there is no lint in the headphone jack.

This is just a guess:
Settings->sound-> tap on "Audio effects" make sure it is "ON" ->Speaker-> equalizer->balanced
Settings->sound-> tap on "Audio effects" make sure it is "ON" ->Wired Stereo->Effects profile->Live stage
Settings->sound-> tap on "Volumes" make sure volume is up on all available options, "OK"
Message was edited by: Geoffrey Seals

RMAN backup in tape

How to perform RMAN backup in tape.
Regards
Iman

The information you require is depending on the MML you are using or planning to use, so without further info from your side answers can not be provided.
Also alanm already posted a documentation link. Did you read that?
Sybrand Bakker
Senior Oracle DBA

ES1946 (Solo) Audio controller not recognized

Dear all,
ES1946 (Solo) Audio controller is not recognized on my box. I examined dmesg, it said:
es1938: OPL3 not detected at 0x1090
I've listed my dmesg and rc.conf below. Could anyone kindly look into it, and give me a hint to solve this problem?
Best regards,
Wen
dmesg
Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
Entering add_active_range(0, 0, 49136) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 49136
HighMem 49136 -> 49136
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 49136
On node 0 totalpages: 49136
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 352 pages used for memmap
Normal zone: 44688 pages, LIFO batch:7
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6B60, 0014 (r0 PTLTD )
ACPI: RSDT 0BFFD520, 002C (r1 PTLTD RSDT 0 LTP 0)
ACPI: FACP 0BFFFB65, 0074 (r1 IBM TP240 2 PTL F4240)
ACPI: DSDT 0BFFD54C, 2619 (r1 PTL BX-TJ 0 MSFT 100000B)
ACPI: FACS 0BFFFFC0, 0040
ACPI: BOOT 0BFFFBD9, 0027 (r1 PTLTD $SBFTBL$ 0 LTP 1)
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 0 CPUs, 0 hotplug CPUs
PERCPU: Allocating 39464 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48752
Kernel command line: root=/dev/sda8 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0118d000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 365.025 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 189624k/196544k available (2120k kernel code, 6384k reserved, 744k data, 264k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB)
lowmem : 0xc0000000 - 0xcbff0000 ( 191 MB)
.init : 0xc03d3000 - 0xc0415000 ( 264 kB)
.data : 0xc031225e - 0xc03cc380 ( 744 kB)
.text : 0xc0100000 - 0xc031225e (2120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 731.57 BogoMIPS (lpj=1218523)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080321
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0a20)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (731.57 BogoMIPS).
net_namespace: 652 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9e5, last bus=0
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 2180-218f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres I PIO at 0398-0399
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 14)
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: can't evaluate _PRS: 12321<6>pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
system 00:05: iomem range 0xe0000-0xfffff could not be reserved
system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x8000-0x803f has been reserved
system 00:06: ioport range 0x2180-0x218f has been reserved
system 00:06: ioport range 0x398-0x399 has been reserved
PCI: Bus 1, cardbus bridge: 0000:00:0a.0
IO window: 0x00001800-0x000018ff
IO window: 0x00001c00-0x00001cff
PREFETCH window: 0x10000000-0x13ffffff
MEM window: 0x14000000-0x17ffffff
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 540k freed
Simple Boot Flag at 0x40 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 371
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:09.0: Boot video device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial 00:08: activated
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
No dock devices found.
input: AT Translated Set 2 keyboard as /class/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1040 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1048 irq 15
ata1.00: ATA-5: HITACHI_DK23CA-10, 00H5A0G1, max UDMA/100
ata1.00: 19640880 sectors, multi 16: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23CA-1 00H5 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
es1938: OPL3 not detected at 0x1090
gameport: ES1938 is pci0000:00:0b.0/gameport0, io 0x10a0, speed 1084kHz
ACPI: EC: GPE storm detected, disabling EC GPE
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SBTN]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FAN] to D3
ACPI: PNP0C0B:00 is registered as cooling_device0
ACPI: Fan [FAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (64 C)
Marking TSC unstable due to: TSC halts in idle.
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: PC Speaker as /class/input/input5
Yenta: CardBus bridge found at 0000:00:0a.0 [1014:019a]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1272, devctl 0x64
Yenta: ISA IRQ mask 0x0498, PCI irq 11
Socket status: 30000010
pccard: PCMCIA card inserted into slot 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PPP generic driver version 2.4.2
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
input: ImPS/2 Generic Wheel Mouse as /class/input/input6
NET: Registered protocol family 23
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00001060
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia0.0
lp: driver loaded but no devices found
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:40:26:5c:d8:21
nsc-ircc 00:09: can't evaluate _CRS: 12321
nsc-ircc 00:09: activation failed
nsc-ircc: probe of 00:09 failed with error -5
nsc-ircc, Found chip at base=0x398
nsc-ircc, Wrong chip version ff
ppdev: user-space parallel port driver
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
Clocksource tsc unstable (delta = -77266143 ns)
Adding 200772k swap on /dev/sda7. Priority:-1 extents:1 across:200772k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
tun0: Disabled Privacy Extensions
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access USB DISK 28X PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="yes"
TIMEZONE="Asia/Saigon"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(8390 pcnet_cs slhc pcnet_cs snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-seq snd-hwdep snd-page-alloc snd-pcm snd-rawmidi snd-timer snd snd-mpu401-uart snd-opl3-lib snd-es1938 soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="fang.ntu.edu.vn"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond)

hi!
did you read this?
http://tascam.com/i-414-232-128-0-4A15AD91.pdf
can be found here: http://tascam.com/products/fireone;9,14,104,19.html
regards,
m.

HT6437 iTunes is not recognizing either of my 2 devices.

iTunes 12 doesn't see my 2 devices wirelessly OR when I plug in via USB. I have never had this problem before with earlier versions of iTunes. HELP!!

Hi jandianajones,
Welcome to the Support Communities! What devices are you trying to sync with iTunes? Were you able to sync them before updating to iTunes 12? The resource below will provide some basic steps to try if iTunes does not recognize your iPhone, iPad or iPod touch.
iOS: Device not recognized in iTunes for OS X - Apple Support
http://support.apple.com/en-us/TS1591
If your iPhone, iPad, or iPod touch doesn't appear under Devices in iTunes after you connect it to your Mac, refer to the troubleshooting suggestions below.
This article is for OS X. If you're using a Windows PC, see what to do if your Device not recognized in iTunes for Windows.
Follow these steps to resolve your issue:
If you haven't connected your iOS device to this computer before, unlock the device and tap Trust. Learn more about the Trust This Computer alert.
Restart your iOS device.
Restart your Mac.
Make sure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
Install software updates on your Mac.
If an iTunes update is available, apply the update.
Check USB connections. iOS devices need USB 2.0 to work properly. If you're not sure your Mac has USB 2.0 ports, check the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Try another USB cable.
Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.
Last Modified: Jun 23, 2014
I hope this information helps ....
- Judy

Steps to restore RMAN backups from tape to disk

Hi All,
using Netbackup Veritas Volume
DB:10.2.0.3.0
OS:AIX 64 bit
Could nayone please share the steps to - restore RMAN backups from tape to disk.
An early reply would be appreciated!!
Thanks for your time!
Regards,

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

RMAN not recognizing tape

Similar Messages

Maybe you are looking for