Roles Not Getting assigned during trusted reconn in OIM 11gR2

Hi Experts,
I have created a Role, Access policy for ACF2 and a rule for automatically provision Users whose Company Code = 200 (company code is a UDF)
The records are getting provisioned if I assign the role manually to the user and run Evaluate user Policies task. But if i reconcile the user from trusted resource, the users with company code are not getting even the role assigned to them.
Am i missing something. Please help me out!!

I followed the exact same steps to create the rule,
Search your Role > Select Your Role > Detail will be opened > Members Tab > Right top Corner > Add Rule > Select your condition
I even tried with User Type = Consultant etc with some OOTB attributes but still no luck
Once the recon is complete and user is created in OIM, i don't see the role added to user. Now, if i open the role again and edit the rule and navigate to preview results tab I see the newly created user listed in preview, and if I click Save without any changes, user gets added to the role.
I think this could be due to our custom event handler as mentioned by NN, please let me know if you have any other clue to debug this issue.

Similar Messages

Approvals during trusted recon in OIM 11gr2

Folks,
I have a requirement to send create user approvals to a user during trusted reconciliation from a file . Is it feasible to achieve .?
i.e we dont want to directly create users in OIM on trusted recon rather send them for approval and after successfull approval the user should be created in OIM.
Regards

I would also suggest using one of the APIs to perform a search user based on your user id value and if it returns a user, then just use the recon api. This way you only have to use the Create User api on new users. The issue you might encounter with this though is if the user is in a pending approval state, then if you get more events for them, they still not be found and you will end up with 2 requests. So before you perform the create, you might have to search the existing requests, or store the user id in a lookup, but store it somewhere so you dont create multiples. Depending on how long your approval is going to take, you could create a recon event for the user if they are still pending approval so once they are created, the retry of the recon events will process it again and update the user. You just need to account for all these things.
-Kevin

Roles not getting assigned to User OIM11gR2

Hi Experts,
I have created a Role, Access policy for ACF2 and a rule for automatically provision Users whose Company Code = 200 (company code is a UDF)
The records are getting provisioned if I assign the role manually to the user and run Evaluate user Policies task. But if i reconcile the user from trusted resource, the users with company code are not getting even the role assigned to them.
Am i missing something. Please help me out!!

hi,
have you run the configuration wizard?
http://yourhost:port/nwa/cfg-wizard
there is a task for BPM. just execute it.
if you have already run the wizard, you can go to following place to check and make further change if required.
http://yourhost:port/nwa/sys-config
select "Applications" tab
put "bpembaseear" in the name filter, select that application in the result table
you will see the properties tab
if your locale is not there, you can fix now.
Best regards,
John

New user creation in AE- user group not getting assigned

Hi All,
Here is a typical case, wherein when we create a new user with AE for the production system, the user gets created and the roles are also assigned but the user group is not getting assigned. The user group is being fetched from a table from the backend and all that is working fine. Infact in order to test the configurations we even created a new user in the production instance of AE giving the development system as the target system for user creation and in this case the user was successfully created and the user group is also assigned. The problem is arising only when the target system is production system.
Connectors are all working fine, but we are unable to think of a reason. Can somebody help us on this?

Hi Vani,
If you are provisioning the user group using user defaults, check that production system is selected in the user defaults configured. Configuration -> user defaults. You can define any user default system, but for perticuticular user defaults that is applicable define all the systems, in which you want user defaults to be provisioned.
Kind Regards,
Srinivasan

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Excise Part-2 is not getting updated during the MIGO

Dear Experts,
When I am doing GR (MIGO), I am selecting the Excise posting transaction in "Excise" header tab as "Capture & Post Excise Invoice".
But, here after posting the GR, only Part-1 is getting updated. Part-2 is not updating. Moreover, if I try to post the same vendor excise invoice in J1IEX, it is giving the error as " Part-1 not yet posted even though Part-1 is updated. Can any body suggest what is the root cause for the same?
One more thing is, once I select "Only Capture Excise Invoice" during GR, in the normal process Part-1 is updating and I'll be able to post the Part-2 in J1IEX. There is no issue. But, I can't be able to post the Part-2 during GR.
Note: I am receiving the goods against with the STO. And, we are paying the customs against with the STO. After paying the Customs Invoice, we are receiving the goods into our manufacturing Plant from logical plant.
Thanks in advance for your action!!!!
Regards,
Satya
Dear

Hi Ashok,
I went through the above note. It explains the causes that why the posting is not happening in J1IEX.
And, as per the solution that is in that note, if we change the status of that excise invoice from 'P' to Blank in the table J_1IEXCHDR, then Vendor excise invoice will be cancelling.
So, I guess this can't resolve my issue. Because, my issue is if I select "Only Capture Excise", the Part-1 is updating in MIGO and I am able to post the Part-2 in J1IEX. But, If I select "Capture & Post Ecxise Invoice" in MIGO, then only Part-1 is updating and even I am not able to post the Part-2 in J1IEX also as the status of the Excise Invoice is "Posted".
And, this is happening frequently during MIGO while selecting "Capture & Post Excise". So, I guess the Function Module / BADI which updates the J_1IPART2 is not getting triggered during MIGO. Once it triggers in MIGO, then Part-2 will be posting in GR itself.
Could you please let me know the standard FM / BADI which updates the Excise Invoice Part-2 (J_1IPART2). So that I'll check with my ABAPer whether it is triggering or not during the MIGO.
Thanks,
Satya

Purchase order output type NEU is not get assigned automatically

Dear All,
when i am creting purchase order the output type NEU is not get assigned automatically.
I have maintained message condn record for NEU and for specific PO doc type NB.
same problame i was facing for the inventory docuemnts but i was resolved by running one SAP std program so please guide me if any such program is available for Purchasing documents also or any other setting i am missing to make.
Pl suggest
Regards,
Vimlesh

Hi
Please check the following in customization.Dont check in NACE you may miss something like fine tune control
1) Check the Message determination procedure is having the NEU output type
2) Check the std Message determination procedure is assigned to PO
3) Check the output type for the Access sequence, default data for transmission medium and partner function VN, Language & Form assigned to it
4) Check the Access sequence for the condition tables
5) Check the condition record in MN04/MN05
6) Check the purchasing group has printer assignement
7) Check the fine tuen control for operation 1 & 2 for message type.
Hope your problem now solved.
Thanks /karthik
Edited by: Karthik on Aug 13, 2009 5:29 PM

Products not getting assigned to product catlog

Hi,
I am learning crm and needed your advice on product catlog.
My products are not getting assigned to product catlog (both automatic as well as manual).
There are 2 queries related to creation of sub area -
1) I wanted to know, what comes in Cat Area type - ie does it remains blank or something is assigned to it?
2) When I enter my product ID under item overview, the errors comes as product 0000..510010 does not have data for sales management.
Please advice me on above 2 queries.
Thanking you in advance.
Regards.
Edited by: Rachna Adani on Jun 28, 2009 7:04 PM

1) I wanted to know, what comes in Cat Area type - ie does it remains blank or something is assigned to it?
Catalog area is a kind of categorization or grouping or hierarchy in a catalog. For example, if yuo are creating a catalog for a super market, then Clothes, Groceries, Toys etc. could be Cat. Areas. With in a catalog area one can define more sub-areas - for example, in Toys, you can have sub-areas either by Age 5-10, Age 11-15 etc or by Brand. This is the case of manual assignment. In case of *automatic assignment, the catalog area and sub-ares will be part of the Product hierarchy.
All you need is a definition for the Catalog Areas. You need to assign products only if there are any in that area or sub-area.
2) When I enter my product ID under item overview, the errors comes as product 0000..510010 does not have data for sales management.
Did you download them from ERP system? Then you must download the Sales Org data. In the same token, if you have created this product in CRM, then you should maintain the sales data tab,

HT4623 my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Batch Classification data not getting updated during the GR of the PO

Dear Gurus,
While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N reads the information directly from the
reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
Sumit Mohan

Hi Sumit,
I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
Regards,
Bhagat

[svn:fx-trunk] 11546: fix so the textLayout. swc does not get modified during the build process.

Revision: 11546
Author:   [email protected]
Date:     2009-11-06 15:42:05 -0800 (Fri, 06 Nov 2009)
Log Message:
fix so the textLayout.swc does not get modified during the build process.
QE notes: no
Doc notes: no
Bugs: no
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/build.xml

Partner roles not getting copied from customer.

Hi ,
Partner Roles not getting copied from customer to delivery Document .
we have created one delivery document from a purchase order and when trying to create billing document from that delivery document it is giving log "payer" and ' Bill to party " not maintained.
when checked in partner tab in delivery document these partner roles are not present there . so what can be the probable reason . These partner functions are maintained in customer.
thanks!!!!!!
which customizing seeting to check for this

Hello Payal,
Please go to T.code VOPA i.e. Maintain Partner Determination and select Delivery from the list and then click Partner Procedurers and select the relevant delivery type and double click you will get mandatory Partner Functions like Sold To, ship To, Bill to are ticked or not.
Reward if useful

Getting Error - Cause: Status of the batch is not 'Completed' in OIM 11g R2 during Trusted Recon

Hi All
I am new to OIM 11g R2. I am trying to create custom connector for trusted recon. The case is to migrate the users from 10g to 11g R2. The recon event is created but it is in Event Recieved status and when I re-evaluate the event, its giving error - Cause: Status of the batch is not 'Completed'.
I saw in some posts to change the recon batch size parameter to 0 and restart the server. I have done that but still I am facing the same issue.
There is no child data in the attribute mapping and user login is set as key.
Any inputs are welcome on how to get rid of this error.
Regards
Vinay

J_IDM@ I am not passing any OID IT Resource as parametere. Yes I have checked but no entries were thr.
Prakash bAJIYA@ i was running Job fro Web console & didnt find any such object. it may be diff from design console.
810444@ Thanks.
Dear All,
In Web Console Job Scheduler, I had one Recon "LDAP FULL Recon" which has a property
"OIM Employee Type" which was before "Full-TYpe" i changed it to * & it worked.Now I am able to generate events.
It seems like value of Employee Type has an Issue in OID, please correct me ?
Thanks a lot for you guys contribution.

Issue in evaluation of Role Membership Rule in gtc trusted recon.

Hi All,
I got a issue in evaluation of role membership in gtc trusted recon.
i created a custom UDF in user profile.i am updating that field from gtc trusted recon.
i created a rule based on that custom UDF.But that is not triggering while we run the gtc trusted recon.users are coming to oim from database .but rule is not evaluating.
if we manually create any user rule is evaluating.role is assingning .
how to solve this problem.it is very urgent for me.
thanks in advance.
-Hanuman

hi bikash,
i am using oim 11.1.1.5 version.
Access policy is triggering if role is assigned to the user ,when i directly create the user in oim, instead of gtc trusted recon.
that udf field is mobile status.it is custom udf .
Thanks & Regards,
Hanuman. T

Getting error in trusted recon from DB in oim 11g

Hi,
I am getting below error while running the trusted recon from DB in OIM 11g:
[2013-12-25T23:27:33.033-08:00] [oim_server1] [ERROR] [] [oracle.iam.reconciliation.impl] [tid: OIMQuartzScheduler_Worker-7] [userId: oiminternal] [ecid: 0000KCGU85V2ZNK5qVCCyY1Ih5WC000002,1:21446] [APP: oim#11.1.2.0.0] Generic Information: {0}[[
oracle.iam.reconciliation.exception.ReconciliationException: Exception occurred while inserting data into table RA_HRRECONTEMPROSS_GTC due to java.sql.SQLException: ORA-12899: value too large for column "IDAMPOC_OIM"."RA_HRRECONTEMPROSS_GTC"."RA_SERVICE_DT" (actual: 10, maximum: 7)
        at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl$1.process(ReconOperationsServiceImpl.java:429)
        at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl$1.process(ReconOperationsServiceImpl.java:407)
        at oracle.iam.platform.tx.OIMTransactionCallback.doInTransaction(OIMTransactionCallback.java:13)
        at oracle.iam.platform.tx.OIMTransactionCallback.doInTransaction(OIMTransactionCallback.java:6)
        at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:128)
        at oracle.iam.platform.tx.OIMTransactionManager.execute(OIMTransactionManager.java:22)
Caused by: oracle.iam.platform.entitymgr.ProviderException: java.sql.SQLException: ORA-12899: value too large for column "IDAMPOC_OIM"."RA_HRRECONTEMPROSS_GTC"."RA_SERVICE_DT" (actual: 10, maximum: 7)
        at oracle.iam.platform.entitymgr.impl.EntityManagerImpl.createEntity(EntityManagerImpl.java:305)
        at oracle.iam.platform.entitymgr.impl.EntityManagerImpl.createEntity(EntityManagerImpl.java:241)
Service date is a varchar field(VARCHAR 2 BYTE) in our trusted table. Its mapped to service date field in OIM 11g which is of type date.
Please let me know if I need to change the field type in our trusted table.
Note: The same configuration is working fine in OIM 9.x.
Regards,
Kalpana.

Now, i went into IDM schema & altered date fields to VARCHAR2(30 CHAR) for all the date type attributes. Now, when I ran schedule job is worked fine and didnt got any errros. But now the trusted recon is not creating users. I dont know why users are not getting created. Can you please let me know which all things should be checked to make a recon a trusted recon so that it creates users.
Thanks,
Kalpana.

Roles Not Getting assigned during trusted reconn in OIM 11gR2

Similar Messages

Maybe you are looking for