Roomie remote & DA1800ES

Struggling to get a DA1800ES Sony Receiver to respond to a Roomie Remote Universal Remote Control (app on an iPhone) via WiFi.  The Roomie Remote can control other WiFi devices (Apple Tv), and can manage InfraRed devices too, but I'm unable to get the Sony to respond.  Anyone have thoughts on settings for the Sony to enable this communication?thanksBruce 

Hi brucemct,
We're sorry but this specific model doesn't have that capability.
This is design for streaming music from your iPhone®/iPad®/iPod®, iTunes® or compatible Apps with AirPlay® only. It's not compatible with remote applications.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

  • Two FIOS boxes in the same room, remote issues

    I have two cable boxes in my living room to enjoy the football season.  my only problem is that all fios boxes have the saem remote settings. 
    Does any one know a way to get the two boxes working separately for under 100 bucks?

    I really doubt that the original poster is monitoring this discussion any more, so I will answer your question. Yes you can have as many boxes as there are inputs on the TV. Each box can output in most of the input formats of any TV. Rf output is not available on some units. For example, my rec room TV has 2 HDMI, 1 component, and 3 composite video inputs. I could have 6 boxes attached, at least. One more, if I had a cable box with an RF output.
    Now my question: Why would you do that?
    I once used two DVRs on one TV because I wanted to record more than 2 channels at once and have them available to that TV. If all you want is a way to swap channels quickly, buy a remote with programmable macro buttons and program them to the channels you will be watching. you can buy such a remote for under $20. Or if you only need two channels, just use the Back button with one STB to toggle back and forth.

  • Remote on iPhone sees only one Apple TV, how do I get it to see two---so I can choose my device?

    I only see the playroom Apple TV on my iPhone remote. I do not see my family room remote. How do I get it to see both?

    You have the Apple TV in the family room setup to use the remote app, correct?
    <edit>
    also all devices need to be on the same wifi network
    See issues with the Apple Remote app

  • Using a PC running iTunes as remote speakers

    I have two Airport Express in my house, which are great for playing music in different rooms remotely, powered by my primary PC in my office. However, I also am buying a PC for my living room to put above the fireplace. There is no room for another set of speakers for another Airport Express there, and I don't want to buy another one. What'd I'd like to do is use this new PC running iTunes as a set of remote speakers, recognized in iTunes like the Airport Express speakers. That way I could play the same music at the same time in many rooms of my house.
    Does anyone know how to do this?
    If not, consider this is a feature request, i hope Apple will give it consideration.

    Hello.
    Any feature requests can be submitted to the following links below
    http://www.apple.com/feedback/itunesapp.html
    http://www.apple.com/feedback/airportexpress.html
    *With Airtunes you are able to stream music to multiple speakers meaning
    1. Multiple Airport Expresses connected to Multiple speakers
    2. Multiple Expresses connected to Speakers & also hearing the audio from the computer it is broadcasting from.
    Now the bigger question I believe you are asking is can other computers pickup on this broadcast of sound?
    Never tried it myself. I am not aware of iTunes being able to pickup the broadcast from the speaker selection in the bottom right hand corner. I am aware of it being able to broadcast it's sound to other speakers on the network though.
    Hopefully other users can post their thoughts and how they got this to work. At this current time I know you can connect multiple expresses, and have it broadcast throughout the house based on where each express it is and the speakers they are connected to.

  • Setting up iSight to monitor room

    Hi all,
    is it possible to set up the iSight camera in my iMac to monitor the room remotely where it is set up?
    If yes, how would I do this? I want to watch it from either a PC, an iPAd or iPhone.
    thanks in advance

    All you need is a software application that can do what you want.  Take a look at the "iSight as a surveillance or Nanny cam" possibilities from page: http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
    Security Spy and EvoCam are the most flexible.  One of them will surely be able to do anything you want (and much more.)
    If you are certain that your needs will not grow so you do not want such flexible and powerful apps, search your Mac's  > App Store... for "surveillance" (without the quotation marks) to see some lower cost alternatives.
    Whatever you decide, be sure to verify that your system meets the minimum requirements for your choice.
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • Collaboration & KM "How To" Documents..

    Hi,
    Can anybody post "How to" documents for Collaboration room creation, customizing and making it available for the members..?
    Also, KM config and TREX with KM integration 'how to' links...
    Thanks in advance..

    Sandeep,
    Thanks for your reply..I have already created rooms for open discussions for the members.
    I am not getting the functionality here..Actually, my requirement is that i want to create a discussion room for members who can join the room remotely for any open discussion / meeting / messenger ?
    Do I have to use any specific available template or any template adding room part category for discussions ?
    how can i customize the room to make it available for the members for remote discussions and instant messaging ? Thanks..

  • Compatibility between D-Link wireline adaptor and Asoka wireline adaptor

    WiFi coverage in my house was just plain awful with the old 2Wire gateway, no signal strength outside of the room the gateway is in. Better signal strength from my neioghbour's house! Bought a D-Link wireline adaptor pair and that fixed one connection problem.  A recent problem had AT&T replace the old 2EWire unit with a Arris NVG589 gateway. Slightly better reception around the house, but not stunning in a couple of rooms. Technician left me with a pair of Asoka wireline adaptors to help solve my bad reception problem.   Plug and Play they aren't. I cannot find the magic for them to connect with my D-Link adaptors. Any suggestions? ThanksPeter 

    ATT tech replaced the gateway with a brand new system. Admitted I seem to have a dead spot when it comes to wireless internet in one room - remote TV box in that room seems to work fine. I have  a D-Link wireline adaptor set up between my gateway and the bedroom - works find for my son's Playstation. Tried to add the ASOKA adaptor into that "network" doesn't seem to be compatible with the D-Link.I'll have another try - the box teh ASOKA adaptors came in didn't have any instructions, so I may be doing something wrong. More research, it seems

  • Rapid Scrolling on Apple TV not working

    I have 2 Apple TV's one in the bedroom and one in the living room.
    Both units are fully updated using version 5.0 (4099) Apple TV Software.
    The one in the bedroom scrolls through my TV episodes beautifully
    The one in the living room only moves at one episode at a time
    Its not a Apple TV remote problem as iv'e tried the living room remote on the bedroom Apple TV and it scrolls beautifully
    Whats the answer? Is there someting deep in the menu that can sort this out?
    I have hundreds of TV shows and its a real pain having to constantly click the remote to get to episode 85

    Received the new Apple TV today - it still doesn't rapid scroll  through my tv programmes!
    So I thought to myself I'll set up the new Apple TV in the bedroom - and it works fine! Rapid scrolling without any problems!
    So I started doing some investigating……
    In the bedroom using Apple TV with Samsung 42" Plasma TV
    The light on the Apple TV comes on when I press the down arrow BUT goes off during rapid scrolling
    In the living room using Apple TV with LG 60" TV
    The light on the Apple TV stays on all the time - even while trying to rapid scroll
    If I put the Apple TV remote really near the Apple TV and away from the TV set then I can get it to rapid scroll sometimes
    If I turn the TV off the rapid scroll seems to work (well the light goes off when I try to rapid scroll)
    So my conclusion is that it is the TV that is interfering with the Apple TV signal
    If this is the case then why hasn't Apple issued a list of TV's that don't work properly with the Apple TV ?

  • Remote Application with multiple computers multiple rooms

    I am planing a whole-house music system and have played around with the Remote application. Seems to work fine in my setup with a MacBook Pro. Have several AiportExpress that I can see through REMOTE but they are not linked to speakers.
    Here what I would like to do.
    1) Control each room separately, so each could have its own music playing or multiple rooms playing having the same song. I think currently one would need to build more than one loop of AirportExpress's linked to the same speakers. With two loops one could access two different libraries on two computers and so have two different songs playing in 2 zones.
    2) Control the loudness in each room. This could be a big problem. There is one master volume, but if one room is larger or has more speakers it could be much louder than the other rooms. So one would constantly play around with the volume when moving from room to room.
    3) Use more than one iPod Touch or iPhone in one set up, so that all people in the house can control the music. I only have one iPhone so I have not had a chance to check this one out. Is it possible to have more than one controlling iPhone or iPod Touch?
    Nice to haves
    1) An alarm function with the time and song selected and with zero volume slowly increasing to a set value over a set time.
    2) Cover flow on the iPhone or iPod Touch
    3) Remote launching of iTunes from the iPhone or iPod Touch
    Any suggestions or answers are welcome. Thanks for your help.

    There are no post activities available in ConfigMgr. Either use dependencies (so that the post activities application/DT has a dependency to the application itself - which is not the best way to solve it imho) or use a wrapper (cmd, ps1, vbs etc) that
    installs the application first and performs additional things afterwards.
    Torsten Meringer | http://www.mssccmfaq.de

  • If I use the remote with two macbooks in the same room both of them answer

    If I use the remote with two macbooks in the same room, the two of them answer. So if the person sitting near me is doing something else I interrupt them... this is quite annoying!
    Does anyone know how to solve this? Should I report it as a bug? Where?

    Hi Carito,
    It is not a bug, all you have to do is pairing them.
    Here is the link:
    http://docs.info.apple.com/article.html?artnum=302545
    and:
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2275.html
    Good Luck.

  • Remote app for iPhone won't let me choose Living Room speakers

    I got a new Airport Express, and set up worked fine. Only trouble is that I've seen screenshots online where in the Remote app's Settings you can choose which speakers to use. I have this option in iTunes on my Mac, but I don't in Remote. There's only a way to choose or add a library, and a setting for staying connected.
    I have tried quitting and restarting iTunes, and rebooting the iPhone.

    Touch the album art screen when you start playing music and the speaker options will appear.

  • I have a 1st generation apple tv that my kids use in their tv room but the remote now will only toggle up and down. Anyone have this problem, can only acess movies and can toggle over to the side for tv shows or other content

    Really frustrating. I have tried to pair 2 different remotes to see if that was the problem, but still can't toggle but up or down........ help!!

    Have you restarted the AppleTV?
    I have several white remotes for ATV1's and a couple have 'sticky' up buttons that require a harder press (one of these was chucked in the sunk a few years ago by my daughter), so I'm not convinced of their longevity as much as I prefer them ergonomically over the new silver ones.
    Odd for two to be exhibiting the same issue which which is why I suggest restarting.  If you had a low battery you'd probably be getting an onscreen warning icon.

  • Is there possible to set up my Find Your Iphone remotely from my computer? I think it has been stolen from my dorm room

    So I left my dorm room and left my Ipod sitting out on my desk. I closed the door and locked it behind me. When I came back it was gone. Is there anyway I can turn on the find my Iphone thing from my computer or have someone at Apple do it for me?

    https://itunes.apple.com/us/app/find-my-iphone/id376101648?mt=8\\
    https://www.icloud.com/#find
    try these
    if youve already setup find my iphone
    sorry i didnt read the question completely before answering and apple wont let me delete it

  • IPad app AiO Remote

    I scanned document with IPad app AiO Remote and HP printer.
    App created .pdf file 306 Mb in documents folder on my iPad Air iOS 8
    When I tried to open document in AiO Remote, I receive error:
    Not enough memory to complete operation.
    And then .pdf preview window showed error
    The operation couldn't be completed.
    NSURLERRORDOMAIN error -999
    Is there any way to save my scanned .pdf document and what is this error means?
    Is this some restriction about size of scanned document in AiO a Remote? Or just a bug?

    Hello @Justromagod ,
    Welcome to the HP forums.
    I understand that you are getting error messages when trying to use the AIO remote app.
    I would like to help.
    I get the 'Not enough memory to complete operation' message tells me that you might be running out of room on the iPad.
    Also, the -999 error usually  means: another request is made before the previous request is completed.
    You could uninstall, then reinstall the app.
    There is a Cloud Services department that supports the App.
    Please call our Cloud Services at 855-785-2777.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Want to use Apple TV to serve existing 4 room wired speaker installation

    I purchased a home with existing 4 room speaker system.  All wires terminate in basement where previous owner had some type of media control center.  Each speaker zone has control for volume in the various rooms.
    My goal is to reconnect the speakers and use my Apple TV (previous generation) as my music source.  I want to keep this as simple and cheap as possible.
    I am assuming I will need an Amp/receiver and a multi-speaker splitter to plug all the speaker wires into.  I know I can use the Apple Remote app on my IPhone to control it remotely.
    What I would like to hear about from the community is
    1. opinions on this set up.  Is there an easier or simpler way to drive and control the speaker?
    2. if this arrangment makes sense, has anyone done this and what equipment works best?
    Thanks

    If you have zoned volume control (ie control for each room) your simplest set up would be to join all four sets of speaker cables into a single output from an amp/receiver, you would need to turn the volume to zero in rooms where you didn't want audio but you will need to judge for yourself whether that is convenient for you or not.
    Your other option is to use an amp with at least 4 separately controlled outputs or a multiplexer, this would be controlled from one central point and so would allow you to turn rooms off without actually visiting them.

Maybe you are looking for