Rotuine in Infopackage for Data Selection---- Urgent

Hi All,
I have a requirement such that i need to select only balnk Values from cube and send it to another cube .
lets say that in CUBE A is the one cube from which i need to extract the data and send it to CUBE B.(data mart).
In CUBE A , I have field Plant , for this field in CUBE A there are values for it and also with no value i.e ' ' (space).
Now my requirement is I need to extract the data from CUBE A for only those records for the field Plant value is ' ' (blank/space).
For this if we give in the infopackage selection if you give space , it is getting all the records.. and If you go for f4 and select Filter symbol and give single value as ' ' (Space or blank) it is taking as value # , but with zero records.
And one more way is writing a Routine for the data selection..
Can anybody guide me how to write a routine for that or send me the code for the above purpose.
As it is a matter of urgency please help me guys.
mail me to [email protected]

hi,
I have an idea, I do not know will it works. I based on Pradeep code:
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'Zfield'.
l_idx = sy-tabix.
l_t_range-SIGN = 'I'.
l_t_range-OPTION = 'NE'.
l_t_range-low = 'A'.
l_t_range-high = 'ZZZZZZZZZZZZZZ'.
modify l_t_range index l_idx.
p_subrc = 0.
Idea is to exclude all posible strings so maybe l_t_range-high should be '99999999999'. I do not know lenght of your plant characteristic as well so remember about this
Regards,
Andrzej

Similar Messages

How debug a routine created in InfoPackage for Data selection ?

Hi everybody,
I decide to debug a routine create in InfoPackage.
Here, the name of my ABAP routine:
program conversion_routine
form compute_TREATMENT_DATE
When i execute the "/h" command to launch debugger, i don't see this routine in Call Stack...
How i can debbug ?
Any suggestions ?
Thanks in advance,
Best regards,
Rodolphe.

Debug ABAP Routine in InfoPackage:
Put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
And when run infopackage, go to sm50.
On that process, menu program->debug program.
In debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.
hope this helps...

How debug a routine create in InfoPackage for Data selection ?

Hi everybody,
I decide to debug a routine create in InfoPackage.
Here, the name of my ABAP routine:
program conversion_routine
form compute_TREATMENT_DATE
When i execute the "/h" command to launch debugger, i don't see this routine in Call Stack...
How i can debbug ?
Any suggestions ?
Thanks in advance,
Best regards,
Rodolphe.

Debug ABAP Routine in InfoPackage:
Put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
And when run infopackage, go to sm50.
On that process, menu program->debug program.
In debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.
hope this helps...

Abap Routine for Date selection in Infopackage

Hi
I have to write an abap routine for date selections in the infopackage,
There are two date begda and enda.
Do i code for BEGDA and fill in the begin date using routine and use another routine to fill the ENDA.
JPJP

Hi JP,
If you have two info objects BEGDA and ENDA in the Info package for selection
then you will have to write seperate routine for each of them.
If you want to give single value for each date field then update only the field l_t_range- low otherwise if you want to give range then you can update the internal table fields l_t_range-low and l_t_range-high .
Regards,
Prakash

Can i have html code for date select options (SEARCH HELP)

Hi frinds,
I have a BSP Page with input as date.
Can i have html code for date select options (SEARCH HELP)
Moosa

Hi
Please find the sample code below.
FROM DATE
      <htmlb:inputField id        = "dd"
                        width     = "45%"
                        type      = "DATE"
                        showHelp = "X" <- Search help
                        alignment = "CENTER"
                        maxlength = "10"
                        disabled = "TRUE"
                        value     = "<%= w_FROMDATE %>" />
TO DATE
      <htmlb:inputField id        = "dd"
                        width     = "45%"
                        type      = "DATE"
                        showHelp = "X"
                        alignment = "CENTER"
                        maxlength = "10"
                        disabled = "TRUE"
value     = "<%= w_TODATE %>" />
Thanks
kalyan

ABAP routine in the infopackage for Multiple Selection

Hi experts,
I want to include a abap routine in the infopackage for Multiple Selection so that I can fetch only the required Material Numbers when the InfoPackage is schedule. As I have the constraints that I have to select certain Material Numbers only, that are not in series - so I cannot select"BT' fuction. Tell me what ABAP Code will work in this scenario.
Kind regards,
Rajesh Giribuwa

Hi,
The Routine will have to use 'EQ' operator and Append each selections to the Structure.
ABAP Routine
InfoPackage definition for Bespoke SIS Structure
Infopackage routine !
Regards
Happy Tony

How to put up a calendar in VI for date selection?

Hi all,
I need to put up a calendar in my VI for date selection to view historical data like we find on websites of travel agents?
& also guide me how to get this kind of calendar.....
please guide me...
Thanking You,
Vaibhav Gandhi
B.E. Instrumentation & Control,
INDIA
Solved!
Go to Solution.

Thank you so much GURU for your very quick & accurate reply.
Further I need to know, that how I can remove the word 'value' from indicator? i.e. it is giving "Value -> 6/1/2009" on indicator.. I just need '6/1/2009' on indicator...
Can it be possible?
Thanks,
Vaibhav Gandhi
B.E. Instrumentation & Control,
INDIA

What bean for date selection should I choose?

I need bean for date selection with folowing features:
1) Period selection
2) Internatioanization
I foung some components:
1) http://www.java-calendar.com/
(+) supports all need features
(-) 50$ :(
2) http://www.toedter.com/
(+) free, interationalization
(-) no period selection
3) http://sourceforge.net/projects/jdatechooser
(+) free, supports all need features
(-) project is too young, i'm searching more mature project
I have no time for long searches, so advise me component please.

From your own findings it's between 1 and 3, but 3 is "too young" so it looks like 1. Spend the 50.

Popup window for data selection in maintenance view

Hi,
How to create popup window for data selection in maintenance view. For example when you go to view v_t510 in se16, there you will see a popup window to enter values. after you enter the values in that window, then data related to those values that you entered in the popup window will displayed.
How can we do that for the custom maintenance view?
Thanks in advance for your help guys.
Regards,
Srinivas.

In your custom maintainace view, if you select the Data browser / Table view maintainace under the tab "Maint Status" as "Dispaly maintanence allowed with restriction" than system will give you popup to restrict by selection.
Regards,
Naimesh Patel

OLAP variable for data selection

hi all ,
can any own explain how the OLAP variable is used for data selection in the info package. how the value is changing in the Variable.
thanks in advance
rajan

Hi Rajan,
You will not be entering any date value. As Dirk mentions, the value will be filled into the variable by way of an exit, i.e. automatic processing according to some code.
Like your date variable can get you the first of the previous month from the exit processing.
Hope this helps...

Calendar...list function shows only events for date select instead of events from that date forward.

Calendar list function shows only events for date selected....instead of events for date selected and events forward from that date. Is there a setting change needed? Help!

Hi,
Did you check that your universe object referring "Date of Completion" has Date data type?
Can you also provide the BOE verson you are using?
I remembered that the calendars were not displayed in XIR2 version.
Didier

Insert Execute InfoPackage - no data selected

We had upgraded the BW3.5 to BI7.0 two
months ago.
Now in QA system, I couldn't insert any
InfoPackage from the Process Type
'Execute InfoPackage'. The warning
message 'No data selected' occured.

Hi Amol,
This is a known issue and it is solved by implementing the below note:
1062704 - P15:PC: InfoPackage input help does not display any values
Hope so the issue will be solved.
Please assign points.
Cheers
Rajesh

Using ABAP routines for data selection

Hello,
I want to use ABAP routine to determine value range of data selection in Data Package but when I use routine for one field, selection criterias for other fields are ignored, e.g.:
in Data Package I have two selection fields:
CPUDT Accounting Document Entry Date
AEDAT Date of the Last Document Change by Transaction
For CPUDT I wrote ABAP routine
and for AEDAT I have just typed in period of time.
I started data extraction and open Monitor for this Data Package.
At Header tag I checked selections info and there is selection only for CPUDT.
Could somebody explain me is it normal system behaviour?
Thanks
Andrzej

Thanks for reply but that would be too easy...
I have tried your advice but nothing changed.
I think this is data extraction configuration problem.
Andrzej

ABAP ROUTINE AT INFOPACKAGE FOR DATE RANGE

hi all,
I want to Schedule my infopackge with selection options
0DATE infoobject with First date of current month( 01.02.2008) to last date of current month ( 29.02.2008).
this i have to get automatically bcoz i have to use this in process chain.
so I want to write a routine for this at the infopackage level with ABAP Routine -6 option.
So please suggest me how to write the code for this case.
thanks,
kiran manyam.

Hi Kiran,
Please paste the following code there and also check for syntax error.
data first_date type d.
data last_date type d.
first_date = sy_datum.
first_dat+6(2) = '01'.
CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
Exporting
DAY_IN = first_date
Importing
LAST_DAY_OF_MONTH = last_date.
          read table l_t_range with key
               fieldname = 'DATE'.
           if sy-subrc = 0.
               l_idx = sy-tabix.
               l_t_range-sign = 'I'.
               l_t_range-option = 'BT'.
               l_t_range-low = first_date.
               l_t_range-high = last_date.
               modify l_t_range index l_idx.
            else.
               move 'DATE' to l_t_range-fieldname.
               l_t_range-sign = 'I'.
               l_t_range-option = 'BT'.
               l_t_range-low = first_date.
               l_t_range-high = last_date.
               append l_t_range.
               endloop.
            endif.
          p_subrc = 0.

Routine for multiple selection in infopackage???

hello guys
I thought of creating one routine for Multiple selections aT Infopackage level....in Selections screen in infopackage,I found one option 'Use Conversion routine' with a check box and it is inactive.....Is it here I need to write my routine inorder to get multiple selection for a infoobject....or is it somehwhere else?How to activate thisoption?
Thanks,
Regards,
S

Hi,
Conversion routines are used in the BI system so that the characteristic values (key) of an InfoObject can be displayed or used in a different format to how they are stored in the database. They can also be stored in the database in a different format to how they are in their original form, and supposedly different values can be consolidated into one.
This will be there at info object level.
Eg : ALPHA: Fills purely numeric fields from the left with zeroes (0).
For multiple selections at info package , in data selection tab under type , u need to select 6 and write the code to select the value.When info package runs it takes the value from routine dynamically and extracts the data based on selection.
Eg: There is a field FISCAL PERIOD For data selection, if u write the code to select current fiscal period. then whenever info package runs it extracts the data for current fiscal period from data source to PSA.
Thanks,
Joseph.

Rotuine in Infopackage for Data Selection---- Urgent

Similar Messages

Maybe you are looking for